Skip to contentSkip to conversation

power_spi.c: Rewrite pmic_reg function

PATCH In review Tom Rini 2 participants 3 messages Oct 25, 2014 – Nov 10, 2014

lore
Share & tools
lore

Tom Rini

author
#0 lore raw

PATCH 1/1 power_spi.c: Rewrite pmic_reg function

The pmic_spi_free function isn't ever used, and as the frameworks stand today, cannot be, so remove it. Integrate the probe function into pmic_reg as it's not really a "probe" today. Finally, add an err label for the common failure cases.

Cc Lukasz Majewski <[email protected]>
Cc Przemyslaw Marczak <[email protected]>
Cc Stefano Babic <[email protected]>
---
 drivers/power/power_spi.c |   33 ++++++++++-----------------------
 1 file changed, 10 insertions(+), 23 deletions(-)
drivers/power/power_spi.c +10 -23
index fb455a00..1e55446 100644
@@ -17,27 +17,14 @@
 
 static struct spi_slave *slave;
 
-void pmic_spi_free(struct spi_slave *slave)
-{
-	if (slave)
-		spi_free_slave(slave);
-}
-
-struct spi_slave *pmic_spi_probe(struct pmic *p)
-{
-	return spi_setup_slave(p->bus,
-		p->hw.spi.cs,
-		p->hw.spi.clk,
-		p->hw.spi.mode);
-}
-
 static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write)
 {
 	u32 pmic_tx, pmic_rx;
 	u32 tmp;
 
 	if (!slave) {
-		slave = pmic_spi_probe(p);
+		slave = spi_setup_slave(p->bus, p->hw.spi.cs, p->hw.spi.clk,
+					p->hw.spi.mode);
 
 		if (!slave)
 			return -1;
@@ -54,25 +41,25 @@ static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write)
 	tmp = cpu_to_be32(pmic_tx);
 
 	if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx,
-			pmic_spi_flags)) {
-		spi_release_bus(slave);
-		return -1;
-	}
+			pmic_spi_flags))
+		goto err;
 
 	if (write) {
 		pmic_tx = p->hw.spi.prepare_tx(reg, val, 0);
 		tmp = cpu_to_be32(pmic_tx);
 		if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx,
-			pmic_spi_flags)) {
-			spi_release_bus(slave);
-			return -1;
-		}
+			pmic_spi_flags))
+			goto err;
 	}
 
 	spi_release_bus(slave);
 	*val = cpu_to_be32(pmic_rx);
 
 	return 0;
+
+err:
+	spi_release_bus(slave);
+	return -1;
 }
 
 int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/1 power_spi.c: Rewrite pmic_reg function

Hi Tom.

Quoted 2 lines · Tom Rini

The pmic_spi_free function isn't ever used, and as the frameworks stand today, cannot be, so remove it.

That's right - it was originally implemented to have a symmetric interface, but never used.

Quoted 71 lines

Integrate the probe function into
pmic_reg as it's not really a "probe" today. Finally, add an err label for the common failure cases.

Cc Lukasz Majewski <[email protected]>
Cc Przemyslaw Marczak <[email protected]>
Cc Stefano Babic <[email protected]>
---
 drivers/power/power_spi.c |   33 ++++++++++-----------------------
 1 file changed, 10 insertions(+), 23 deletions(-)
drivers/power/power_spi.c +6 -23
index fb455a00..1e55446 100644
@@ -17,27 +17,14 @@
 
 static struct spi_slave *slave;
 
-void pmic_spi_free(struct spi_slave *slave)
-{
-	if (slave)
-		spi_free_slave(slave);
-}
-
-struct spi_slave *pmic_spi_probe(struct pmic *p)
-{
-	return spi_setup_slave(p->bus,
-		p->hw.spi.cs,
-		p->hw.spi.clk,
-		p->hw.spi.mode);
-}
-
 static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write)
 {
 	u32 pmic_tx, pmic_rx;
 	u32 tmp;
 
 	if (!slave) {
-		slave = pmic_spi_probe(p);
+		slave = spi_setup_slave(p->bus, p->hw.spi.cs, p->hw.spi.clk,
+					p->hw.spi.mode);
 
 		if (!slave)
 			return -1;
@@ -54,25 +41,25 @@ static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write)
 	tmp = cpu_to_be32(pmic_tx);
 
 	if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx,
-			pmic_spi_flags)) {
-		spi_release_bus(slave);
-		return -1;
-	}
+			pmic_spi_flags))
+		goto err;
 
 	if (write) {
 		pmic_tx = p->hw.spi.prepare_tx(reg, val, 0);
 		tmp = cpu_to_be32(pmic_tx);
 		if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx,
-			pmic_spi_flags)) {
-			spi_release_bus(slave);
-			return -1;
-		}
+			pmic_spi_flags))
+			goto err;
 	}
 
 	spi_release_bus(slave);

drivers/power/power_spi.c static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write) · line 65

Quoted 10 lines
drivers/power/power_spi.c +4 -0
 	*val = cpu_to_be32(pmic_rx);
 
 	return 0;
+
+err:
+	spi_release_bus(slave);
+	return -1;
 }
 
 int pmic_reg_write(struct pmic *p, u32 reg, u32 val)

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author
#2 lore raw
In reply to Tom Rini
Quoted 10 lines · Tom Rini

The pmic_spi_free function isn't ever used, and as the frameworks stand today, cannot be, so remove it. Integrate the probe function into pmic_reg as it's not really a "probe" today. Finally, add an err label for the common failure cases.

Cc Lukasz Majewski <[email protected]>
Cc Przemyslaw Marczak <[email protected]>
Cc Stefano Babic <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141110/36eec3a0/attachment.pgp>