Skip to contentSkip to conversation

2.6.25.2 - Jiffies/Time jumping back and forth (Regereesion from 2.6.24)

DISCUSSION Martin Knoblauch 1 participant 1 message May 8, 2008

lore
Share & tools
lore
#0 lore raw

----- Original Message ----

Quoted 30 lines

From: Thomas Gleixner <[email protected]>
To: Martin Knoblauch <[email protected]>
Cc: Gabriel C <[email protected]>; Bart Van Assche <[email protected]>; [email protected]; [email protected]
Sent: Thursday, May 8, 2008 4:13:55 PM
Subject: Re: 2.6.25.2 - Jiffies/Time jumping back and forth (Regereesion from 2.6.24)

Quoted 5 lines · Martin Knoblauch

on two different systems running 2.6.25.2:

ibm x3650(2xDualCore)
-------------------------------------
[root@lpsdm60 ~]# cat

/sys/devices/system/clocksource/clocksource0/available_clocksource

Quoted 2 lines

tsc hpet acpi_pm jiffies
[root@lpsdm60 ~]# cat

/sys/devices/system/clocksource/clocksource0/current_clocksource

Quoted 5 lines

tsc

HP Proliant DL-380G4 (2xSingleCore)
------------------------------------------------------------
[root@lpsdm52 ~]# cat

/sys/devices/system/clocksource/clocksource0/available_clocksource

Quoted 2 lines

tsc hpet acpi_pm jiffies
[root@lpsdm52 ~]# cat

/sys/devices/system/clocksource/clocksource0/current_clocksource

Quoted 5 lines

tsc

and on the DL380G4 running 2.6.24:
---------------------------------------------------------
[root@lpsdm52 ~]# cat

Quoted 9 lines

/sys/devices/system/clocksource/clocksource0/available_clocksource

Quoted 2 lines

hpet acpi_pm jiffies tsc
[root@lpsdm52 ~]# cat

/sys/devices/system/clocksource/clocksource0/current_clocksource

Quoted 1 line

hpet

So on 2.6.24 the TSC is declared unstable at some point and 2.6.25 thinks it works fine. Is this the same kernel config (aside of the 24/25 fuzz) ?

yup. 25 config is derived from 24. Config and demsg for 25 are here:

http://www.ussg.iu.edu/hypermail/linux/kernel/0804.2/1144.html

Config/dmesg for 24 are attached.

Cheers
Martin

[    0.000000] Linux version 2.6.24 (root@lpsdm60) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 SMP Mon Apr 14 16:06:21 CEST 2008
[    0.000000] Command line: ro root=/dev/sda3 rhgb quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[    0.000000]  BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bffcb440 (usable)
[    0.000000]  BIOS-e820: 00000000bffcb440 - 00000000bffceac0 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bffceac0 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 154) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 786379) 1 entries of 3200 used
[    0.000000] Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used
[    0.000000] end_pfn_map = 2359296
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP 000FDFD0, 0024 (r2 IBM   )
[    0.000000] ACPI: XSDT BFFCE9C0, 004C (r1 IBM    SERVALNT     1000 IBM  45444F43)
[    0.000000] ACPI: FACP BFFCE900, 0084 (r2 IBM    SERVALNT     1000 IBM  45444F43)
[    0.000000] ACPI: DSDT BFFCB440, 2C02 (r2 IBM    SERVALNT     1000 INTL 20041203)
[    0.000000] ACPI: FACS BFFCE640, 0040
[    0.000000] ACPI: APIC BFFCE840, 0084 (r1 IBM    SERVALNT     1000 IBM  45444F43)
[    0.000000] ACPI: SRAT BFFCE700, 00E8 (r1 IBM    SERVALNT     1000 IBM  45444F43)
[    0.000000] ACPI: HPET BFFCE6C0, 0038 (r1 IBM    SERVALNT     1000 IBM  45444F43)
[    0.000000] ACPI: MCFG BFFCE680, 003C (r1 IBM    SERVALNT     1000 IBM  45444F43)
[    0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 6 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 7 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 0-c0000000
[    0.000000] Entering add_active_range(0, 0, 154) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 786379) 1 entries of 3200 used
[    0.000000] SRAT: Node 0 PXM 0 0-240000000
[    0.000000] Entering add_active_range(0, 0, 154) 2 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 786379) 2 entries of 3200 used
[    0.000000] Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used
[    0.000000] NUMA: Using 63 for the hash shift.
[    0.000000] Bootmem setup node 0 0000000000000000-0000000240000000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  2359296
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      154
[    0.000000]     0:      256 ->   786379
[    0.000000]     0:  1048576 ->  2359296
[    0.000000] On node 0 totalpages: 2096997
[    0.000000]   DMA zone: 96 pages used for memmap
[    0.000000]   DMA zone: 2877 pages reserved
[    0.000000]   DMA zone: 1021 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 24480 pages used for memmap
[    0.000000]   DMA32 zone: 757803 pages, LIFO batch:31
[    0.000000]   Normal zone: 30720 pages used for memmap
[    0.000000]   Normal zone: 1280000 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x588
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
[    0.000000] Processor #6
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[    0.000000] Processor #7
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[    0.000000] PERCPU: Allocating 425712 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2038824
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: ro root=/dev/sda3 rhgb quiet
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[  150.233392] time.c: Detected 2327.502 MHz processor.
[  150.235525] Console: colour VGA+ 80x25
[  150.235532] console [tty0] enabled
[  150.235546] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[  150.235548] ... MAX_LOCKDEP_SUBCLASSES:    8
[  150.235549] ... MAX_LOCK_DEPTH:          30
[  150.235550] ... MAX_LOCKDEP_KEYS:        2048
[  150.235551] ... CLASSHASH_SIZE:           1024
[  150.235552] ... MAX_LOCKDEP_ENTRIES:     8192
[  150.235553] ... MAX_LOCKDEP_CHAINS:      16384
[  150.235554] ... CHAINHASH_SIZE:          8192
[  150.235556]  memory used by lock dependency info: 1712 kB
[  150.235557]  per task-struct memory footprint: 2160 bytes
[  150.235559] Checking aperture...
[  150.235568] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[  150.267666] Placing software IO TLB between 0x123c000 - 0x523c000
[  150.377395] Memory: 8086092k/9437184k available (2901k kernel code, 301896k reserved, 1534k data, 772k init)
[  150.454897] Calibrating delay using timer specific routine.. 4659.71 BogoMIPS (lpj=9319423)
[  150.454994] Security Framework initialized
[  150.454999] SELinux:  Initializing.
[  150.455038] SELinux:  Starting in permissive mode
[  150.455045] selinux_register_security:  Registering secondary module capability
[  150.455047] Capability LSM initialized as secondary
[  150.455781] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[  150.461466] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[  150.464252] Mount-cache hash table entries: 256
[  150.464666] CPU: L1 I cache: 32K, L1 D cache: 32K
[  150.464669] CPU: L2 cache: 4096K
[  150.464671] CPU 0/0 -> Node 0
[  150.464672] using mwait in idle threads.
[  150.464674] CPU: Physical Processor ID: 0
[  150.464675] CPU: Processor Core ID: 0
[  150.464681] CPU0: Thermal monitoring enabled (TM2)
[  150.464693] Freeing SMP alternatives: 23k freed
[  150.466328] ACPI: Core revision 20070126
[  150.508978] Using local APIC timer interrupts.
[  150.551854] APIC timer calibration result 20781273
[  150.551856] Detected 20.781 MHz APIC timer.
[  150.552215] lockdep: not fixing up alternatives.
[  150.552248] Booting processor 1/4 APIC 0x1
[  150.562605] Initializing CPU#1
[  150.639671] Calibrating delay using timer specific routine.. 4655.06 BogoMIPS (lpj=9310136)
[  150.639678] CPU: L1 I cache: 32K, L1 D cache: 32K
[  150.639680] CPU: L2 cache: 4096K
[  150.639682] CPU 1/1 -> Node 0
[  150.639684] CPU: Physical Processor ID: 0
[  150.639685] CPU: Processor Core ID: 1
[  150.639691] CPU1: Thermal monitoring enabled (TM2)
[  150.640173] Intel(R) Xeon(R) CPU            5140  @ 2.33GHz stepping 06
[  150.640200] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[  150.660474] lockdep: not fixing up alternatives.
[  150.660504] Booting processor 2/4 APIC 0x6
[  150.670859] Initializing CPU#2
[  150.747437] Calibrating delay using timer specific routine.. 4655.11 BogoMIPS (lpj=9310223)
[  150.747444] CPU: L1 I cache: 32K, L1 D cache: 32K
[  150.747445] CPU: L2 cache: 4096K
[  150.747448] CPU 2/6 -> Node 0
[  150.747449] CPU: Physical Processor ID: 3
[  150.747450] CPU: Processor Core ID: 0
[  150.747456] CPU2: Thermal monitoring enabled (TM2)
[  150.747926] Intel(R) Xeon(R) CPU            5140  @ 2.33GHz stepping 06
[  150.747958] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[  150.768145] lockdep: not fixing up alternatives.
[  150.768173] Booting processor 3/4 APIC 0x7
[  150.778528] Initializing CPU#3
[  150.855202] Calibrating delay using timer specific routine.. 4655.13 BogoMIPS (lpj=9310263)
[  150.855209] CPU: L1 I cache: 32K, L1 D cache: 32K
[  150.855211] CPU: L2 cache: 4096K
[  150.855213] CPU 3/7 -> Node 0
[  150.855215] CPU: Physical Processor ID: 3
[  150.855216] CPU: Processor Core ID: 1
[  150.855222] CPU3: Thermal monitoring enabled (TM2)
[  150.855691] Intel(R) Xeon(R) CPU            5140  @ 2.33GHz stepping 06
[  150.855726] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[  150.875704] Brought up 4 CPUs
[  150.875814] CPU0 attaching sched-domain:
[  150.875816]  domain 0: span 03
[  150.875818]   groups: 01 02
[  150.875820]   domain 1: span 0f
[  150.875822]    groups: 03 0c
[  150.875824]    domain 2: span 0f
[  150.875825]     groups: 0f
[  150.875827] CPU1 attaching sched-domain:
[  150.875829]  domain 0: span 03
[  150.875830]   groups: 02 01
[  150.875832]   domain 1: span 0f
[  150.875833]    groups: 03 0c
[  150.875836]    domain 2: span 0f
[  150.875837]     groups: 0f
[  150.875839] CPU2 attaching sched-domain:
[  150.875840]  domain 0: span 0c
[  150.875841]   groups: 04 08
[  150.875844]   domain 1: span 0f
[  150.875845]    groups: 0c 03
[  150.875847]    domain 2: span 0f
[  150.875848]     groups: 0f
[  150.875850] CPU3 attaching sched-domain:
[  150.875851]  domain 0: span 0c
[  150.875853]   groups: 08 04
[  150.875855]   domain 1: span 0f
[  150.875856]    groups: 0c 03
[  150.875859]    domain 2: span 0f
[  150.875860]     groups: 0f
[  150.876382] khelper used greatest stack depth: 6032 bytes left
[  150.876533] net_namespace: 152 bytes
[  150.877118] NET: Registered protocol family 16
[  150.877534] ACPI: bus type pci registered
[  150.879062] PCI: Using MMCONFIG at e0000000 - e25fffff
[  150.882239] ACPI: EC: Look up EC in DSDT
[  150.884299] ACPI: Interpreter enabled
[  150.884301] ACPI: (supports S0 S5)
[  150.884309] ACPI: Using IOAPIC for interrupt routing
[  150.887955] ACPI: PCI Root Bridge [PCI0] (0000:00)
[  150.902921] PCI: Transparent bridge - 0000:00:1e.0
[  150.902956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[  150.903204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.PCI5.PCI6._PRT]
[  150.903272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.PCI5.PCI7._PRT]
[  150.903364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT]
[  150.903415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[  150.903479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC2B._PRT]
[  150.908995] ACPI: PCI Interrupt Link [LP00] (IRQs *3)
[  150.909121] ACPI: PCI Interrupt Link [LP01] (IRQs *10)
[  150.909243] ACPI: PCI Interrupt Link [LP02] (IRQs *3)
[  150.909365] ACPI: PCI Interrupt Link [LP03] (IRQs *7)
[  150.909487] ACPI: PCI Interrupt Link [LP04] (IRQs *7)
[  150.909571] ACPI: Blank IRQ resource
[  150.909572] ACPI: Resource is not an IRQ entry
[  150.909668] ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
[  150.909791] ACPI: PCI Interrupt Link [LP06] (IRQs *11)
[  150.909913] ACPI: PCI Interrupt Link [LP07] (IRQs *5)
[  150.910080] Linux Plug and Play Support v0.97 (c) Adam Belay
[  150.910136] pnp: PnP ACPI init
[  150.910154] ACPI: bus type pnp registered
[  150.921472] pnp: PnP ACPI: found 11 devices
[  150.921475] ACPI: ACPI bus type pnp unregistered
[  150.921753] usbcore: registered new interface driver usbfs
[  150.921860] usbcore: registered new interface driver hub
[  150.921945] usbcore: registered new device driver usb
[  150.922151] PCI: Using ACPI for IRQ routing
[  150.922153] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[  150.931189] PCI-GART: No AMD northbridge found.
[  150.935141] Time: tsc clocksource has been installed.
[  150.935152] Switched to high resolution mode on CPU 0
[  150.935713] Switched to high resolution mode on CPU 1
[  150.935990] Switched to high resolution mode on CPU 3
[  150.935997] Switched to high resolution mode on CPU 2
[  150.947195] system 00:01: ioport range 0x520-0x53f has been reserved
[  150.947199] system 00:01: ioport range 0x540-0x547 has been reserved
[  150.947214] system 00:08: ioport range 0xca8-0xca8 has been reserved
[  150.947217] system 00:08: ioport range 0xcac-0xcac has been reserved
[  150.947226] system 00:09: ioport range 0x400-0x43f has been reserved
[  150.947229] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[  150.947232] system 00:09: ioport range 0x540-0x55f could not be reserved
[  150.947235] system 00:09: ioport range 0x560-0x57f has been reserved
[  150.947237] system 00:09: ioport range 0x580-0x5ff has been reserved
[  150.947240] system 00:09: ioport range 0x800-0x80f has been reserved
[  150.947243] system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
[  150.947246] system 00:09: iomem range 0xfecc0000-0xfecc3fff has been reserved
[  150.947249] system 00:09: iomem range 0xfe000000-0xfe01ffff has been reserved
[  150.947251] system 00:09: iomem range 0xfe020000-0xfe6fffff has been reserved
[  150.947254] system 00:09: iomem range 0xfe700400-0xfebfffff has been reserved
[  150.947257] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
[  150.948298] PCI: Bridge: 0000:1b:00.0
[  150.948300]   IO window: disabled.
[  150.948372]   MEM window: disabled.
[  150.948463]   PREFETCH window: disabled.
[  150.948556] PCI: Bridge: 0000:1b:01.0
[  150.948600]   IO window: 6000-6fff
[  150.948693]   MEM window: cc000000-cdefffff
[  150.948738]   PREFETCH window: c2000000-c20fffff
[  150.948830] PCI: Bridge: 0000:1a:00.0
[  150.948875]   IO window: 6000-6fff
[  150.948967]   MEM window: cc000000-cdefffff
[  150.949013]   PREFETCH window: c2000000-c20fffff
[  150.949104] PCI: Bridge: 0000:1a:00.3
[  150.949105]   IO window: disabled.
[  150.949196]   MEM window: disabled.
[  150.949242]   PREFETCH window: disabled.
[  150.949333] PCI: Bridge: 0000:00:02.0
[  150.949335]   IO window: 6000-6fff
[  150.949337]   MEM window: cc000000-cdefffff
[  150.949340]   PREFETCH window: c2000000-c20fffff
[  150.949343] PCI: Bridge: 0000:00:03.0
[  150.949345]   IO window: 5000-5fff
[  150.949347]   MEM window: ce000000-cfffffff
[  150.949350]   PREFETCH window: cdf00000-cdffffff
[  150.949352] PCI: Bridge: 0000:00:04.0
[  150.949354]   IO window: 8000-ffff
[  150.949356]   MEM window: disabled.
[  150.949358]   PREFETCH window: disabled.
[  150.949361] PCI: Bridge: 0000:00:05.0
[  150.949362]   IO window: disabled.
[  150.949364]   MEM window: disabled.
[  150.949366]   PREFETCH window: disabled.
[  150.949370] PCI: Bridge: 0000:00:06.0
[  150.949371]   IO window: 7000-7fff
[  150.949374]   MEM window: ca000000-cbffffff
[  150.949376]   PREFETCH window: c2100000-c21fffff
[  150.949379] PCI: Bridge: 0000:00:07.0
[  150.949380]   IO window: disabled.
[  150.949383]   MEM window: disabled.
[  150.949384]   PREFETCH window: disabled.
[  150.949387] PCI: Bridge: 0000:00:1c.0
[  150.949388]   IO window: disabled.
[  150.949391]   MEM window: disabled.
[  150.949394]   PREFETCH window: disabled.
[  150.949397] PCI: Bridge: 0000:00:1c.1
[  150.949398]   IO window: disabled.
[  150.949402]   MEM window: disabled.
[  150.949404]   PREFETCH window: disabled.
[  150.949408] PCI: Bridge: 0000:00:1e.0
[  150.949410]   IO window: 3000-4fff
[  150.949414]   MEM window: de000000-dfffffff
[  150.949416]   PREFETCH window: d0000000-ddffffff
[  150.949429] PCI: Setting latency timer of device 0000:00:02.0 to 64
[  150.949747] PCI: Setting latency timer of device 0000:1a:00.0 to 64
[  150.950158] PCI: Setting latency timer of device 0000:1b:00.0 to 64
[  150.950538] ACPI: PCI Interrupt 0000:1b:01.0[A] -> GSI 17 (level, low) -> IRQ 17
[  150.950616] PCI: Setting latency timer of device 0000:1b:01.0 to 64
[  150.950983] PCI: Setting latency timer of device 0000:1a:00.3 to 64
[  150.951034] PCI: Setting latency timer of device 0000:00:03.0 to 64
[  150.951041] PCI: Setting latency timer of device 0000:00:04.0 to 64
[  150.951048] PCI: Setting latency timer of device 0000:00:05.0 to 64
[  150.951055] PCI: Setting latency timer of device 0000:00:06.0 to 64
[  150.951063] PCI: Setting latency timer of device 0000:00:07.0 to 64
[  150.951088] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 21 (level, low) -> IRQ 21
[  150.951092] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[  150.951113] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 20 (level, low) -> IRQ 20
[  150.951117] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[  150.951125] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[  150.951209] NET: Registered protocol family 2
[  150.995375] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[  150.997224] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[  151.002800] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
[  151.005753] TCP: Hash tables configured (established 524288 bind 65536)
[  151.005783] TCP reno registered
[  151.015289] checking if image is initramfs... it is
[  151.079962] Freeing initrd memory: 955k freed
[  151.081408] udev used greatest stack depth: 5424 bytes left
[  151.091737] VDSO: variable vdso_jiffies broken
[  151.091739] VDSO: variable vdso_vgetcpu_mode broken
[  151.091741] VDSO: variable vdso_vsyscall_gtod_data broken
[  151.092871] audit: initializing netlink socket (disabled)
[  151.092915] audit(1210180041.777:1): initialized
[  151.093856] Total HugeTLB memory allocated, 0
[  151.094235] VFS: Disk quotas dquot_6.5.1
[  151.094296] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[  151.095044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[  151.095054] io scheduler noop registered
[  151.095057] io scheduler anticipatory registered
[  151.095059] io scheduler deadline registered
[  151.095103] io scheduler cfq registered (default)
[  151.097696] Boot video device is 0000:01:06.0
[  151.098186] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  151.101701] ACPI: Processor [CPU0] (supports 8 throttling states)
[  151.101836] ACPI: Processor [CPU1] (supports 8 throttling states)
[  151.101932] ACPI: Processor [CPU2] (supports 8 throttling states)
[  151.102022] ACPI: Processor [CPU3] (supports 8 throttling states)
[  151.126018] Real Time Clock Driver v1.12ac
[  151.127800] intel_rng: FWH not detected
[  151.128747] Linux agpgart interface v0.102
[  151.129792] [drm] Initialized drm 1.1.0 20060810
[  151.129795] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[  151.390541] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[  151.392994] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[  151.400368] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
[  151.400385] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[  151.400389] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[  151.408743] Probing IDE interface ide0...
[  151.972849] Probing IDE interface ide1...
[  153.166439] hdc: HL-DT-STCD-RW/DVD DRIVE GCC-T10N, ATAPI CD/DVD-ROM drive
[  153.166527] ide1 at 0x170-0x177,0x376 on irq 15
[  153.169765] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[  153.169771] Uniform CD-ROM driver Revision: 3.20
[  153.179298] ide-floppy driver 0.99.newide
[  153.182119] PNP: No PS/2 controller found. Probing ports directly.
[  153.433815] serio: i8042 KBD port at 0x60,0x64 irq 1
[  153.434069] mice: PS/2 mouse device common for all mice
[  153.833016] usbcore: registered new interface driver hiddev
[  153.833166] usbcore: registered new interface driver usbhid
[  153.833169] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[  153.833960] oprofile: using NMI interrupt.
[  153.834032] TCP cubic registered
[  153.834034] Initializing XFRM netlink socket
[  153.834073] NET: Registered protocol family 1
[  153.834098] NET: Registered protocol family 17
[  153.836814] Freeing unused kernel memory: 772k freed
[  153.877163] udevstart used greatest stack depth: 5256 bytes left
[  153.883935] SCSI subsystem initialized
[  153.886558] Driver 'sd' needs updating - please use bus_type methods
[  153.888346] Adaptec aacraid driver 1.1-5[2449]-ms
[  153.889145] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[  153.889152] PCI: Setting latency timer of device 0000:04:00.0 to 64
[  154.117135] AAC0: kernel 5.2-0[11844] Mar 21 2007
[  154.117137] AAC0: monitor 5.2-0[11844]
[  154.117139] AAC0: bios 5.2-0[11844]
[  154.117141] AAC0: serial 5889140
[  154.117142] AAC0: 64bit support enabled.
[  154.117144] AAC0: 64 Bit DAC enabled
[  154.124394] scsi0 : ServeRAID
[  154.124987] scsi 0:0:0:0: Direct-Access     ServeRA  DISK1            V1.0 PQ: 0 ANSI: 2
[  154.125977] sd 0:0:0:0: [sda] 1432576000 512-byte hardware sectors (733479 MB)
[  154.126004] sd 0:0:0:0: [sda] Write Protect is off
[  154.126006] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00
[  154.126054] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  154.126248] sd 0:0:0:0: [sda] 1432576000 512-byte hardware sectors (733479 MB)
[  154.126272] sd 0:0:0:0: [sda] Write Protect is off
[  154.126274] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00
[  154.126333] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  154.126337]  sda: sda1 sda2 sda3 sda4
[  154.131999] sd 0:0:0:0: [sda] Attached SCSI removable disk
[  154.156308] scsi 0:1:0:0: Direct-Access     IBM-ESXS MAX3147RC        T904 PQ: 0 ANSI: 5
[  154.161625] scsi 0:1:1:0: Direct-Access     IBM-ESXS MAX3147RC        T904 PQ: 0 ANSI: 5
[  154.167318] scsi 0:1:2:0: Direct-Access     IBM-ESXS MAX3147RC        T904 PQ: 0 ANSI: 5
[  154.173865] scsi 0:1:3:0: Direct-Access     IBM-ESXS MAX3147RC        T904 PQ: 0 ANSI: 5
[  154.179265] scsi 0:1:4:0: Direct-Access     IBM-ESXS MAX3147RC        T904 PQ: 0 ANSI: 5
[  154.185832] scsi 0:1:5:0: Direct-Access     IBM-ESXS MAX3147RC        T904 PQ: 0 ANSI: 5
[  154.264049] scsi 0:3:0:0: Enclosure         IBM-ESXS VSC7160          1.06 PQ: 0 ANSI: 3
[  154.409459] insmod used greatest stack depth: 3384 bytes left
[  154.475181] kjournald starting.  Commit interval 5 seconds
[  154.475327] EXT3-fs: mounted filesystem with ordered data mode.
[  154.636844] SELinux:  Disabled at runtime.
[  154.636856] audit(1210180045.328:2): selinux=0 auid=4294967295
[  157.670539] warning: process `kmodule' used the deprecated sysctl system call with 1.23.
[  161.120479] floppy0: no floppy controllers found
[  161.215515] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[  161.215519] Copyright (c) 1999-2006 Intel Corporation.
[  161.216469] ACPI: PCI Interrupt 0000:24:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[  161.216555] PCI: Setting latency timer of device 0000:24:00.0 to 64
[  161.267109] e1000: 0000:24:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:36:c3:52
[  161.334936] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[  161.335253] ACPI: PCI Interrupt 0000:24:00.1[B] -> GSI 18 (level, low) -> IRQ 18
[  161.335335] PCI: Setting latency timer of device 0000:24:00.1 to 64
[  161.411433] e1000: 0000:24:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:36:c3:53
[  161.482521] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[  161.482572] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[  161.482583] PCI: Setting latency timer of device 0000:07:00.0 to 64
[  161.527299] e1000: 0000:07:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:36:c3:d6
[  161.598258] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
[  161.598293] ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 19 (level, low) -> IRQ 19
[  161.598303] PCI: Setting latency timer of device 0000:07:00.1 to 64
[  161.642907] e1000: 0000:07:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:36:c3:d7
[  161.710040] e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
[  161.797880] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  161.849023] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 20 (level, low) -> IRQ 20
[  161.890166] USB Universal Host Controller Interface driver v3.0
[  161.892838] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[  161.892850] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[  161.892853] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[  161.899737] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[  161.899774] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002200
[  161.908075] usb usb1: configuration #1 chosen from 1 choice
[  161.911822] hub 1-0:1.0: USB hub found
[  161.911872] hub 1-0:1.0: 2 ports detected
[  162.014889] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
[  162.014900] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[  162.014904] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[  162.022513] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[  162.022548] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00002600
[  162.035503] usb usb2: configuration #1 chosen from 1 choice
[  162.038899] hub 2-0:1.0: USB hub found
[  162.038922] hub 2-0:1.0: 2 ports detected
[  162.157972] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 23
[  162.157984] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[  162.157988] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[  162.165290] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[  162.165319] uhci_hcd 0000:00:1d.2: irq 23, io base 0x00002a00
[  162.172820] usb usb3: configuration #1 chosen from 1 choice
[  162.177334] hub 3-0:1.0: USB hub found
[  162.177348] hub 3-0:1.0: 2 ports detected
[  162.299404] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 22
[  162.299415] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[  162.299418] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[  162.309726] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[  162.309758] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00002e00
[  162.345037] usb usb4: configuration #1 chosen from 1 choice
[  162.358555] hub 4-0:1.0: USB hub found
[  162.358575] hub 4-0:1.0: 2 ports detected
[  162.541203] usb 3-1: new full speed USB device using uhci_hcd and address 2
[  162.626661] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[  162.628631] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[  162.628639] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[  162.651412] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[  162.655344] ehci_hcd 0000:00:1d.7: debug port 1
[  162.655350] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[  162.655360] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9000000
[  162.672901] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[  162.706045] usb usb5: configuration #1 chosen from 1 choice
[  162.717385] hub 5-0:1.0: USB hub found
[  162.717400] hub 5-0:1.0: 8 ports detected
[  162.905993] md: Autodetecting RAID arrays.
[  162.905996] md: Scanned 0 and added 0 devices.
[  162.905998] md: autorun ...
[  162.905999] md: ... autorun DONE.
[  163.075997] usb 3-1: device not accepting address 2, error -71
[  163.607308] usb 3-1: new full speed USB device using uhci_hcd and address 4
[  163.776740] usb 3-1: configuration #1 chosen from 1 choice
[  163.786503] input: IBM IBM RSA2 as /class/input/input0
[  164.106338] input: USB HID v1.10 Keyboard [IBM IBM RSA2] on usb-0000:00:1d.2-1
[  164.114799] input: IBM IBM RSA2 as /class/input/input1
[  164.380806] input: USB HID v1.10 Mouse [IBM IBM RSA2] on usb-0000:00:1d.2-1
[  164.649716] input: Power Button (FF) as /class/input/input2
[  164.729052] ACPI: Power Button (FF) [PWRF]
[  207.609481] EXT3 FS on sda3, internal journal
[  207.646492] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected]
[  207.919236] kjournald starting.  Commit interval 5 seconds
[  207.925411] EXT3 FS on sda1, internal journal
[  207.925424] EXT3-fs: mounted filesystem with ordered data mode.
[  208.103601] Adding 8008392k swap on /dev/sda2.  Priority:-1 extents:1 across:8008392k
[  208.351081] IA-32 Microcode Update Driver: v1.14a <[email protected]>
[  208.870594] e1000: eth2: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[  223.329382] RPC: Registered udp transport module.
[  223.329387] RPC: Registered tcp transport module.
[  223.470828] nfs: Unknown parameter `ra_factor'
[  223.544526] nfs: Unknown parameter `ra_factor'
[  223.594703] nfs: Unknown parameter `ra_factor'
[  223.638051] nfs: Unknown parameter `ra_factor'
[  223.703851] nfs: Unknown parameter `ra_factor'
[  223.763759] nfs: Unknown parameter `ra_factor'
[  223.823425] nfs: Unknown parameter `ra_factor'
[  223.883197] nfs: Unknown parameter `ra_factor'
[  223.943213] nfs: Unknown parameter `ra_factor'
[  224.002952] nfs: Unknown parameter `ra_factor'
[  224.062771] nfs: Unknown parameter `ra_factor'
[  224.122763] nfs: Unknown parameter `ra_factor'
[  224.182674] nfs: Unknown parameter `ra_factor'
[  224.232334] nfs: Unknown parameter `ra_factor'
[  224.274563] nfs: Unknown parameter `ra_factor'
[  224.332084] nfs: Unknown parameter `ra_factor'
[  234.021035] nfs: Unknown parameter `ra_factor'
[  234.062111] nfs: Unknown parameter `ra_factor'
[  234.076928] nfs: Unknown parameter `ra_factor'
[  234.088525] nfs: Unknown parameter `ra_factor'
[  234.100184] nfs: Unknown parameter `ra_factor'
[  234.111889] nfs: Unknown parameter `ra_factor'
[  234.123291] nfs: Unknown parameter `ra_factor'
[  234.134733] nfs: Unknown parameter `ra_factor'
[  234.147059] nfs: Unknown parameter `ra_factor'
[  235.067973] nfs: Unknown parameter `ra_factor'
[  235.079306] nfs: Unknown parameter `ra_factor'
[  235.089936] nfs: Unknown parameter `ra_factor'
[  235.102150] nfs: Unknown parameter `ra_factor'
[  235.113481] nfs: Unknown parameter `ra_factor'
[  235.124935] nfs: Unknown parameter `ra_factor'
[  235.136267] nfs: Unknown parameter `ra_factor'
[  235.147845] nfs: Unknown parameter `ra_factor'
[  235.159026] nfs: Unknown parameter `ra_factor'