Skip to contentSkip to conversation

ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl,mode' property

PATCH New Fabio Estevam 3 participants 3 messages Nov 5, 2014 – Nov 11, 2014

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl,mode' property

From: Fabio Estevam <[email protected]>

imx6q-tbs2910 board uses sgtl5000 codec and the machine file (imx-sgtl5000) already sets SSI in slave mode and codec in master mode, so there is no need for having this property.

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/boot/dts/imx6q-tbs2910.dts | 1 -
 1 file changed, 1 deletion(-)
arch/arm/boot/dts/imx6q-tbs2910.dts +0 -1
index d2a5743..f7427bf 100644
@@ -215,7 +215,6 @@
 };
 
 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };
Signature · 1 line
1.9.1
#1 lore raw

PATCH 1/1 ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl, mode' property

Quoted 7 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

imx6q-tbs2910 board uses sgtl5000 codec and the machine file (imx-sgtl5000) already sets SSI in slave mode and codec in master mode, so there is no need for having this property.

Signed-off-by Fabio Estevam <[email protected]>

Yes, audio still works without that property.

Tested-by Soeren Moch <[email protected]>
Quoted 17 lines
---
  arch/arm/boot/dts/imx6q-tbs2910.dts | 1 -
  1 file changed, 1 deletion(-)
arch/arm/boot/dts/imx6q-tbs2910.dts +0 -1
index d2a5743..f7427bf 100644
@@ -215,7 +215,6 @@
  };
 
  &ssi1 {
-	fsl,mode = "i2s-slave";
  	status = "okay";
  };