Skip to contentSkip to conversation

Build optimization question

DISCUSSION Dean 5 participants 6 messages Nov 8, 2014 – Nov 9, 2014

lore
Share & tools
lore

Dean

author
#0 lore raw

So I am using core-image-minimal and trying to shrink things as much as possible for boot speed. I wrap the bitbake command in some other commands to basically extract the image and then attach it to a kernel as a ramdisk. So the size of the image is critical to boot speed.

In some of my custom packages I have used -Os in the gcc command line. Is there a way to set this globally for all the packages built into the image?

Any other hints or tips to reduce the size of the build? Or potential changes to u-boot to make it load faster? This is running on a beaglebone black.

Thanks,
Dean

#1 lore raw
Quoted 2 lines · Dean

So I am using core-image-minimal and trying to shrink things as much as

possible for boot speed. I wrap the bitbake command in some other commands to basically extract the image and then attach it to a kernel as a ramdisk. So the size of the image is critical to boot speed.

Quoted 3 lines

In some of my custom packages I have used -Os in the gcc command line. Is there a way to set this globally for all the packages built into the

image?

Quoted 2 lines

Any other hints or tips to reduce the size of the build? Or potential

changes to u-boot to make it load faster? This is running on a beaglebone black.

Quoted 9 lines

Thanks,
Dean
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

... I've been noticing over the last few releases that core - image - minimal isn't so minimal anymore. Its been picking up weight as it ages (like me).

I'm planning to just start excluding some of the packages in it ... I don't need sound, wireless, Bluetooth etc.

Regards,

Brian

#2 lore raw
Quoted 5 lines · Brian Hutchinson
Quoted 2 lines · Dean

So I am using core-image-minimal and trying to shrink things as much as

possible for boot speed. I wrap the bitbake command in some other commands to basically extract the image and then attach it to a kernel as a ramdisk. So the size of the image is critical to boot speed.

Quoted 3 lines
Quoted 3 lines

In some of my custom packages I have used -Os in the gcc command line. Is there a way to set this globally for all the packages built into the

image?

Quoted 2 lines
Quoted 2 lines

Any other hints or tips to reduce the size of the build? Or potential

changes to u-boot to make it load faster? This is running on a beaglebone black.

Quoted 11 lines
Quoted 9 lines

Thanks,
Dean
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

... I've been noticing over the last few releases that core - image -

minimal isn't so minimal anymore. Its been picking up weight as it ages (like me).

Quoted 2 lines

I'm planning to just start excluding some of the packages in it ... I

don't need sound, wireless, Bluetooth etc.

Quoted 4 lines

Regards,

Brian

... going from memory about my last dizzy build, /use/share was 35M. I've been using the rootfs tar to build my image and exclude some of this stuff but I need to look into ways to tame this kind of thing with recipes etc.

Regards,

Brian

#3 lore raw
In reply to Brian Hutchinson
Quoted 4 lines · Brian Hutchinson

I'm planning to just start excluding some of the packages in it ... I don't need sound, wireless, Bluetooth etc.

If you don't need sound, wifi, and bluetooth then remove the relevant flags from DISTRO_FEATURES and they'll never be built.

Ross

#4 lore raw

Take a look at poky-tiny distro:
http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta-yocto/conf/distro/poky-tiny.conf

As you are using BBB you can optimize u-boot code and remove some board detection steps.

I noticed that MLO generated by u-boot 2014.07 mainline is too much faster than the old ones.

Regards,

--
*dS
Diego Sueiro
sent from mobile.
Em 08/11/2014 12:54, "Burton, Ross" <[email protected]> escreveu:

Quoted 19 lines · Brian Hutchinson
Quoted 5 lines

I'm planning to just start excluding some of the packages in it ... I don't need sound, wireless, Bluetooth etc.

If you don't need sound, wifi, and bluetooth then remove the relevant flags from DISTRO_FEATURES and they'll never be built.

Ross

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#5 lore raw

Diego,
I agree with Ross here in from my experience with embedded systems the three best ways to strip your root file system are by removing unneeded boot loader coe, removing unneeded kernel components and that of striping your middle ware to smaller versions like Busybox and other similiar packages like elibc. Also running strip after your debugging is done for the target can strip your code even further, there are cases of stripping large programs like the kernel down from 20 megabytes to 2. Lastly, linking Busybox statically is great if you don't need a reason to link it against a C library implementation as static versions of Busybox can easily be less then 10 megabytes from my reading and experience.
Regards Nick

Quoted 39 lines · Diego Sueiro

Take a look at poky-tiny distro:
http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta-yocto/conf/distro/poky-tiny.conf

As you are using BBB you can optimize u-boot code and remove some board detection steps.

I noticed that MLO generated by u-boot 2014.07 mainline is too much faster than the old ones.

Regards,

--
*dS
Diego Sueiro
sent from mobile.
Em 08/11/2014 12:54, "Burton, Ross" <[email protected]> escreveu:

Quoted 19 lines · Brian Hutchinson
Quoted 5 lines

I'm planning to just start excluding some of the packages in it ... I don't need sound, wireless, Bluetooth etc.

If you don't need sound, wifi, and bluetooth then remove the relevant flags from DISTRO_FEATURES and they'll never be built.

Ross

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto