ARM: dts: sama5d4: use macro instead of numeric value
PATCH 1/1 ARM: dts: sama5d4: use macro instead of numeric value
There is a macro for the irq type.
Signed-off-by Ludovic Desroches <[email protected]>
--- arch/arm/boot/dts/sama5d4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/sama5d4.dtsi +1 -1
@@ -817,7 +817,7 @@ i2c2: i2c at f8024000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8024000 0x4000>; - interrupts = <34 4 6>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; #address-cells = <1>;
Signature · 1 line
2.0.3
PATCH 1/1 ARM: dts: sama5d4: use macro instead of numeric value
On 13/11/2014 10:29, Ludovic Desroches :
Quoted 3 lines
There is a macro for the irq type.
Signed-off-by Ludovic Desroches <[email protected]>
Acked-by Nicolas Ferre <[email protected]>
queued in at91-3.18-fixes (but low priority though: don't know if it'll make it for 3.18).
Bye,
Quoted 18 lines
--- arch/arm/boot/dts/sama5d4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/sama5d4.dtsi +1
-1@@ -817,7 +817,7 @@ i2c2: i2c at f8024000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8024000 0x4000>; - interrupts = <34 4 6>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; #address-cells = <1>;
Signature · 1 line
Nicolas Ferre