Skip to contentSkip to conversation

IIO fixes for 3.18 set 3

GIT PULL Jonathan Cameron 2 participants 2 messages Nov 16, 2014 – Nov 26, 2014 IIO

lore
Share & tools
lore

Jonathan Cameron

author maintainer
#0 lore raw

The following changes since commit b598aacc29331e7e638cd509108600e916c6331b:

staging:iio:ade7758: Remove "raw" from channel name (2014-11-05 18:33:48 +0000)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-3.18c

for you to fetch changes up to 9e8e228f2bf066c37eeee7c25b810cad3235427a:

iio: accel: bmc150: set low default thresholds (2014-11-16 20:25:00 +0000)

----------------------------------------------------------------
Third set of IIO fixes for the 3.18 cycle.

Most of these are fairly standard little fixes, a bmc150 and bmg160 patch is to make an ABI change to indicated a specific axis in an event rather than the generic option in the original drivers. As both of these drivers are new in this cycle it would be ideal to push this minor change through even though it isn't strictly a fix. A couple of other 'fixes' change defaults for some settings on these new drivers to more intuitive calues. Looks like some useful feedback has been coming in for this driver since it was applied.

* IIO_EVENT_CODE_EXTRACT_DIR bit mask was wrong and has been for a while 0xCF clearly doesn't give a contiguous bitmask.
* kxcjk-1013 range setting was failing to mask out the previous value in the register and hence was 'enable only'.
* men_z188 device id table wasn't null terminated.
* bmg160 and bmc150 both failed to correctly handling an error in mode setting.
* bmg160 and bmc150 both had a bug in setting the event direction in the event spec (leads to an attribute name being incorrect)
* bmg160 defaulted to an open drain output for the interrupt - as a default this obviously only works with some interrupt chips - hence change the default to push-pull (note this is a new driver so we aren't going to cause any regressions with this change).
* bmc150 had an unintuitive default for the rate of change (motion detector) so change it to 0 (new driver so change of default won't cause any regressions).

----------------------------------------------------------------
Axel Lin (1):
iio: adc: men_z188_adc: Add terminating entry for men_z188_ids

Cristina Ciocan (1):
iio: Fix IIO_EVENT_CODE_EXTRACT_DIR bit mask

Daniel Baluta (1):

      iio: accel: kxcjk-1013: Fix kxcjk10013_set_range

Srinivas Pandruvada (8):
iio: gyro: bmg160: Error handling when mode set fails
iio: gyro: bmg160: Don't let interrupt mode to be open drain
iio: gyro: bmg160: Send x, y and z motion separately
iio: gyro: bmg160: Fix iio_event_spec direction
iio: accel: bmc150: Error handling when mode set fails
iio: accel: bmc150: Send x, y and z motion separately
iio: accel: bmc150: Fix iio_event_spec direction
iio: accel: bmc150: set low default thresholds

 drivers/iio/accel/bmc150-accel.c | 40 ++++++++++++++++++++++++------
 drivers/iio/accel/kxcjk-1013.c   |  2 ++
 drivers/iio/adc/men_z188_adc.c   |  1 +
 drivers/iio/gyro/bmg160.c        | 53 +++++++++++++++++++++++++++++++++++++---
 include/linux/iio/events.h       |  2 +-
 5 files changed, 86 insertions(+), 12 deletions(-)
#1 lore raw
Quoted 7 lines · Jonathan Cameron

The following changes since commit b598aacc29331e7e638cd509108600e916c6331b:

staging:iio:ade7758: Remove "raw" from channel name (2014-11-05 18:33:48 +0000)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-3.18c

Sorry for the delay, now pulled and pushed out.

greg k-h