how to update a package on yocto project
Hi
board : Intel Galileo Gen 1
I use yocto project for build image/tarball for the board.
How to update a existing package???
I mean, I use openjdk-6 on my board.
But I need to change it to openjdk-7.
I edited local.conf by adding following line.
preferred_version_openjdkXXXX = XXXX
Signature · 2 lines
Regards, Nishanth.S
Hi,
Try with something like this added to the build's conf/local.conf:
PREFERRED_VERSION_openjdk-7-jre = "25b30-2.3.12" PREFERRED_PROVIDER_openjdk-7-jre = "openjdk-7-jre"
Of course, substitute PREFERRED_VERSION_openjdk-7-jre with your exact version of openjdk-7-jre that you have and want to use.
Regards,
Cristian Iorga
Yocto Project
Intel Corporation
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Nishanth S
Sent: Tuesday, November 18, 2014 8:30 AM
To: [email protected]
Subject: [bitbake-devel] how to update a package on yocto project
Hi
board : Intel Galileo Gen 1
I use yocto project for build image/tarball for the board.
How to update a existing package???
I mean, I use openjdk-6 on my board.
But I need to change it to openjdk-7.
I edited local.conf by adding following line.
preferred_version_openjdkXXXX = XXXX
Signature · 8 lines
Regards, Nishanth.S -- _______________________________________________ bitbake-devel mailing list [email protected] http://lists.openembedded.org/mailman/listinfo/bitbake-devel
Hi
board : Intel Galileo Gen 1
I use yocto project for build image/tarball for the board.
How to update a existing package???
I mean, I use openjdk-6 on my board.
But I need to change it to openjdk-7.
I edited local.conf by adding following line.
preferred_version_openjdkXXXX = XXXX
I tried this but the resulting image.tar had only openjdk-6.
How do I include openjdk-7 with core-image???
Signature · 2 lines
Regards, Nishanth.S
Hi Nishanth,
Quoted 12 lines · On Monday 24 November 2014 11:34:17 Nishanth S wrote:
board : Intel Galileo Gen 1
I use yocto project for build image/tarball for the board.
How to update a existing package???
I mean, I use openjdk-6 on my board.
But I need to change it to openjdk-7.
I edited local.conf by adding following line.
Quoted 8 lines
preferred_version_openjdkXXXX= XXXXI tried this but the resulting image.tar had only openjdk-6.
How do I include openjdk-7 with core-image???
There needs to be a recipe to actually provide that - PREFERRED_VERSION only selects between available versioned recipes. Is there an openjdk-7 recipe in your configuration? If not, you will need to add one.
Cheers,
Paul
Signature · 2 lines
Paul Eggleton Intel Open Source Technology Centre
Hi,
Nishanth, I am assuming you are using the meta-java layer, right? If so, have you tried my suggestions?
/Cristian
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Paul Eggleton
Sent: Tuesday, November 25, 2014 1:20 PM
To: Nishanth S
Cc: [email protected]
Subject: Re: [yocto] [bitbake-devel] how to update a package on yocto project
Hi Nishanth,
Quoted 12 lines · On Monday 24 November 2014 11:34:17 Nishanth S wrote:
board : Intel Galileo Gen 1
I use yocto project for build image/tarball for the board.
How to update a existing package???
I mean, I use openjdk-6 on my board.
But I need to change it to openjdk-7.
I edited local.conf by adding following line.
Quoted 8 lines
preferred_version_openjdkXXXX= XXXXI tried this but the resulting image.tar had only openjdk-6.
How do I include openjdk-7 with core-image???
There needs to be a recipe to actually provide that - PREFERRED_VERSION only selects between available versioned recipes. Is there an openjdk-7 recipe in your configuration? If not, you will need to add one.
Cheers,
Paul
Signature · 7 lines
Paul Eggleton Intel Open Source Technology Centre -- _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
Please note that the right list to ask this question would be:
[email protected] and/or [email protected]
Regards,
Cristian Iorga
Yocto Project
Intel Corporation
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Nishanth S
Sent: Tuesday, November 18, 2014 8:30 AM
To: [email protected]
Subject: [bitbake-devel] how to update a package on yocto project
Hi
board : Intel Galileo Gen 1
I use yocto project for build image/tarball for the board.
How to update a existing package???
I mean, I use openjdk-6 on my board.
But I need to change it to openjdk-7.
I edited local.conf by adding following line.
preferred_version_openjdkXXXX = XXXX
Signature · 8 lines
Regards, Nishanth.S -- _______________________________________________ bitbake-devel mailing list [email protected] http://lists.openembedded.org/mailman/listinfo/bitbake-devel