arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)
PATCH 1/1 arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)
As checkpatch complaines about these camel-case defines, lets change them to only use upper-case characters.
Signed-off-by Stefan Roese <[email protected]>
Cc Heiko Schocher <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Jon Nettleton <[email protected]>
Cc Stefano Babic <[email protected]>
--- arch/arm/cpu/armv7/mx6/clock.c | 2 +- arch/arm/include/asm/arch-mx6/clock.h | 8 ++++---- board/aristainetos/aristainetos.c | 2 +- board/freescale/mx6slevk/mx6slevk.c | 2 +- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +- board/solidrun/hummingboard/hummingboard.c | 2 +- 6 files changed, 9 insertions(+), 9 deletions(-)
arch/arm/cpu/armv7/mx6/clock.c +1 -1
@@ -443,7 +443,7 @@ int enable_fec_anatop_clock(enum enet_freq freq)struct anatop_regs __iomem *anatop = (struct anatop_regs __iomem *)ANATOP_BASE_ADDR ; -if (freq < ENET_25MHz || freq > ENET_125MHz) +if (freq <ENET_25MHZ || freq >ENET_125MHZ )return -EINVAL ; reg =readl (&anatop->pll_enet);
arch/arm/include/asm/arch-mx6/clock.h +4 -4
@@ -43,10 +43,10 @@ enum mxc_clock { };enum enet_freq { - ENET_25MHz, - ENET_50MHz, - ENET_100MHz, - ENET_125MHz, +ENET_25MHZ , +ENET_50MHZ , +ENET_100MHZ , +ENET_125MHZ , };u32 imx_get_uartclk (void );
board/aristainetos/aristainetos.c +1 -1
@@ -301,7 +301,7 @@ int board_eth_init(bd_t *bis)/* clear gpr1[14], gpr1[18:17] to select anatop clock */ clrsetbits_le32 (&iomuxc_regs->gpr[1 ],IOMUX_GPR1_FEC_MASK ,0 ); - ret =enable_fec_anatop_clock (ENET_50MHz); + ret =enable_fec_anatop_clock (ENET_50MHZ );if (ret)return ret;
board/freescale/mx6slevk/mx6slevk.c +1 -1
@@ -235,7 +235,7 @@ static int setup_fec(void)/* clear gpr1[14], gpr1[18:17] to select anatop clock */ clrsetbits_le32 (&iomuxc_regs->gpr[1 ],IOMUX_GPR1_FEC_MASK ,0 ); - ret =enable_fec_anatop_clock (ENET_50MHz); + ret =enable_fec_anatop_clock (ENET_50MHZ );if (ret)return ret;
board/freescale/mx6sxsabresd/mx6sxsabresd.c +1 -1
@@ -140,7 +140,7 @@ static int setup_fec(void) reg |=BM_ANADIG_PLL_ENET_REF_25M_ENABLE ;writel (reg, &anatop->pll_enet); - ret =enable_fec_anatop_clock (ENET_125MHz); + ret =enable_fec_anatop_clock (ENET_125MHZ );if (ret)return ret;
board/solidrun/hummingboard/hummingboard.c +1 -1
@@ -146,7 +146,7 @@ int board_eth_init(bd_t *bis) {struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR ; -int ret =enable_fec_anatop_clock (ENET_25MHz); +int ret =enable_fec_anatop_clock (ENET_25MHZ );if (ret)return ret;
Signature · 1 line
2.1.3
PATCH 1/1 arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)
Hello Stefan,
Am 19.11.2014 16:30, schrieb Stefan Roese:
Quoted 8 lines
As checkpatch complaines about these camel-case defines, lets change them to only use upper-case characters.
Signed-off-by Stefan Roese <[email protected]>Cc Heiko Schocher <[email protected]>Cc Fabio Estevam <[email protected]>Cc Jon Nettleton <[email protected]>Cc Stefano Babic <[email protected]>
Quoted 8 lines
--- arch/arm/cpu/armv7/mx6/clock.c | 2 +- arch/arm/include/asm/arch-mx6/clock.h | 8 ++++---- board/aristainetos/aristainetos.c | 2 +- board/freescale/mx6slevk/mx6slevk.c | 2 +- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +- board/solidrun/hummingboard/hummingboard.c | 2 +- 6 files changed, 9 insertions(+), 9 deletions(-)
Thanks!
Acked-by Heiko Schocher <[email protected]>
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany