Skip to contentSkip to conversation

x86, mm: fix zone ranges print in boot

PATCH Superseded Xishi Qiu 2 participants 2 messages Dec 4, 2014 – Dec 8, 2014

Subsystems (3)
Memory management x86 x86 MM

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Xishi Qiu

author
#0 lore raw

PATCH 1/1 x86, mm: fix zone ranges print in boot

This is the usual log without restrict memory.
...

[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0xc3fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
[    0.000000]   node   0: [mem 0x00100000-0xbf78ffff]
[    0.000000]   node   0: [mem 0x100000000-0x63fffffff]
[    0.000000]   node   1: [mem 0x640000000-0xc3fffffff]

...

This is the log when set "mem=2G" in cmdline.
...

[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]  // should be 0x7fffffff, right?
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
[    0.000000]   node   0: [mem 0x00100000-0x7fffffff]

...

This patch fix the print, the following log shows right ranges.
...

[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0x7fffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
[    0.000000]   node   0: [mem 0x00100000-0x7fffffff]

...

Signed-off-by Xishi Qiu <[email protected]>
---
 arch/x86/mm/init.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/mm/init.c +2 -2
index 66dba36..07244aa 100644
@@ -674,10 +674,10 @@ void __init zone_sizes_init(void)
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 
 #ifdef CONFIG_ZONE_DMA
-	max_zone_pfns[ZONE_DMA]		= MAX_DMA_PFN;
+	max_zone_pfns[ZONE_DMA]		= min(MAX_DMA_PFN, max_low_pfn);
 #endif
 #ifdef CONFIG_ZONE_DMA32
-	max_zone_pfns[ZONE_DMA32]	= MAX_DMA32_PFN;
+	max_zone_pfns[ZONE_DMA32]	= min(MAX_DMA32_PFN, max_low_pfn);
 #endif
 	max_zone_pfns[ZONE_NORMAL]	= max_low_pfn;
 #ifdef CONFIG_HIGHMEM
Signature · 1 line
2.0.0
merge bot
#1 lore raw

[tip:x86/mm] x86/mm: Fix zone ranges boot printout

x86/mm: Fix zone ranges boot printout
Commit-ID:  5f9f7a56565c3f44b0a4b2966414e09048dddcf7
Gitweb:     http://git.kernel.org/tip/5f9f7a56565c3f44b0a4b2966414e09048dddcf7
Author:     Xishi Qiu <[email protected]>
AuthorDate: Thu, 4 Dec 2014 15:50:00 +0800
Committer:  Ingo Molnar <[email protected]>
CommitDate: Mon, 8 Dec 2014 11:05:41 +0100

x86/mm: Fix zone ranges boot printout

This is the usual physical memory layout boot printout:

	...
	[    0.000000] Zone ranges:
	[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
	[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
	[    0.000000]   Normal   [mem 0x100000000-0xc3fffffff]
	[    0.000000] Movable zone start for each node
	[    0.000000] Early memory node ranges
	[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
	[    0.000000]   node   0: [mem 0x00100000-0xbf78ffff]
	[    0.000000]   node   0: [mem 0x100000000-0x63fffffff]
	[    0.000000]   node   1: [mem 0x640000000-0xc3fffffff]
	...

This is the log when we set "mem=2G" on the boot cmdline:

	...
	[    0.000000] Zone ranges:
	[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
	[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]  // should be 0x7fffffff, right?
	[    0.000000]   Normal   empty
	[    0.000000] Movable zone start for each node
	[    0.000000] Early memory node ranges
	[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
	[    0.000000]   node   0: [mem 0x00100000-0x7fffffff]
	...

This patch fixes the printout, the following log shows the right ranges:

	...
	[    0.000000] Zone ranges:
	[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
	[    0.000000]   DMA32    [mem 0x01000000-0x7fffffff]
	[    0.000000]   Normal   empty
	[    0.000000] Movable zone start for each node
	[    0.000000] Early memory node ranges
	[    0.000000]   node   0: [mem 0x00001000-0x00099fff]
	[    0.000000]   node   0: [mem 0x00100000-0x7fffffff]
	...
Signed-off-by Xishi Qiu <[email protected]>
Cc Linux MM <[email protected]>
Cc Rik van Riel <[email protected]>
Cc <[email protected]>
Link http://lkml.kernel.org/r/[email protected] open here
Signed-off-by Ingo Molnar <[email protected]>
---
 arch/x86/mm/init.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/mm/init.c +2 -2
index 82b41d5..a97ee08 100644
@@ -703,10 +703,10 @@ void __init zone_sizes_init(void)
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 
 #ifdef CONFIG_ZONE_DMA
-	max_zone_pfns[ZONE_DMA]		= MAX_DMA_PFN;
+	max_zone_pfns[ZONE_DMA]		= min(MAX_DMA_PFN, max_low_pfn);
 #endif
 #ifdef CONFIG_ZONE_DMA32
-	max_zone_pfns[ZONE_DMA32]	= MAX_DMA32_PFN;
+	max_zone_pfns[ZONE_DMA32]	= min(MAX_DMA32_PFN, max_low_pfn);
 #endif
 	max_zone_pfns[ZONE_NORMAL]	= max_low_pfn;
 #ifdef CONFIG_HIGHMEM

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>