Skip to contentSkip to conversation

B4860: Add alternate LC VCO serdes protocols support in board file

PATCH New Shaveta Leekha 2 participants 2 messages Nov 12, 2014 – Dec 5, 2014

lore
Share & tools
lore

Shaveta Leekha

author
#0 lore raw

PATCH 3/3 B4860: Add alternate LC VCO serdes protocols support in board file

Add the support of newly added LC VCO SerDes protocols for configuration of IDT and VSC crossbar

Signed-off-by Shaveta Leekha <[email protected]>
Signed-off-by Poonam Aggrwal <[email protected]>
Change-Id I16ad23e2cbea3b0a232a153984d5126bc79ddd26

Reviewed-on: http://git.am.freescale.net:8181/23354

Tested-by Yusong Sun <[email protected]>
Reviewed-by Yusong Sun <[email protected]>
---
 board/freescale/b4860qds/b4860qds.c |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)
board/freescale/b4860qds/b4860qds.c +13 -0
index 975952f..7f2437e 100644
@@ -385,15 +385,18 @@ int configure_vsc3316_3308(void)
 		}
 		break;
 
+	case 0x01:
 	case 0x02:
 	case 0x04:
 	case 0x05:
 	case 0x06:
+	case 0x07:
 	case 0x08:
 	case 0x09:
 	case 0x0A:
 	case 0x0B:
 	case 0x0C:
+	case 0x2F:
 	case 0x30:
 	case 0x32:
 	case 0x33:

@@ -494,10 +497,14 @@ int configure_vsc3316_3308(void)
 	case 0x9E:
 	case 0x9A:
 	case 0x98:
+	case 0xb1:
 	case 0xb2:
+	case 0x48:
 	case 0x49:
 	case 0x4E:
+	case 0x8C:
 	case 0x8D:
+	case 0x79:
 	case 0x7A:
 		num_vsc08_con = NUM_CON_VSC3308;
 		/* Configure VSC3308 crossbar switch */

@@ -730,19 +737,23 @@ int config_serdes1_refclks(void)
 	 * to 122.88MHz
 	 */
 	switch (serdes1_prtcl) {
+	case 0x29:
 	case 0x2A:
 	case 0x2C:
 	case 0x2D:
 	case 0x2E:
+	case 0x01:
 	case 0x02:
 	case 0x04:
 	case 0x05:
 	case 0x06:
+	case 0x07:
 	case 0x08:
 	case 0x09:
 	case 0x0A:
 	case 0x0B:
 	case 0x0C:
+	case 0x2F:
 	case 0x30:
 	case 0x32:
 	case 0x33:

@@ -860,6 +871,8 @@ int config_serdes2_refclks(void)
 #endif
 	case 0x9E:
 	case 0x9A:
+		/* fallthrough */
+	case 0xb1:
 	case 0xb2:
 		debug("Configuring IDT for PCIe SATA for srds_prctl:%x\n",
 			serdes2_prtcl);
Signature · 1 line
1.7.6.GIT
#1 lore raw

PATCH 3/3 B4860: Add alternate LC VCO serdes protocols support in board file

Quoted 10 lines · Shaveta Leekha

Add the support of newly added LC VCO SerDes protocols for configuration of IDT and VSC crossbar

Signed-off-by Shaveta Leekha <[email protected]>
Signed-off-by Poonam Aggrwal <[email protected]>
Change-Id I16ad23e2cbea3b0a232a153984d5126bc79ddd26

Reviewed-on: http://git.am.freescale.net:8181/23354

Tested-by Yusong Sun <[email protected]>
Reviewed-by Yusong Sun <[email protected]>

---

For future patches, please remove internal review information which is not reachable for most folks.

Applied to u-boot-mpc85xx, awaiting upstream.

York