powerpc/t2080: updating rcw for silicon v1.1
PATCH v2 1/1 powerpc/t2080: updating rcw for silicon v1.1
T2080 v1.1 requires different MEM_PLL_RAT from previous v1.0, and also update core frequency to 1.8GHz for v1.1.
We reserve the support for T2080 v1.0 and enable v1.1 by default.
Signed-off-by Shengzhou Liu <[email protected]>
---
v2: reserve v1.0 support.
board/freescale/t208xqds/t2080_rcw.cfg | 16 ++++++++++++---- board/freescale/t208xrdb/t2080_rcw.cfg | 20 ++++++++++++++------ 2 files changed, 26 insertions(+), 10 deletions(-)
board/freescale/t208xqds/t2080_rcw.cfg +12 -4
@@ -1,8 +1,16 @@ #PBL preamble and RCW header aa55aa55 010e0100 -#SerDes Protocol: 0x66_0x16 -#Core/DDR: 1533Mhz/2133MT/s -12100017 15000000 00000000 00000000 -66150002 00008400 e8104000 c1000000 + +#For T2080 v1.0 +#SerDes=0x66_0x16, Core=1533MHz, DDR=2133MT/s +#12100017 15000000 00000000 00000000 +#66150002 00008400 e8104000 c1000000 +#00000000 00000000 00000000 000307fc +#00000000 00000000 00000000 00000004 + +#For T2080 v1.1 +#SerDes=0x66_0x15, Core=1800MHz, DDR=1867MT/s +0c070012 0e000000 00000000 00000000 +66150002 00000000 e8104000 c1000000 00000000 00000000 00000000 000307fc 00000000 00000000 00000000 00000004
board/freescale/t208xrdb/t2080_rcw.cfg +14 -6
@@ -1,8 +1,16 @@ -#PBL preamble and RCW header for T2080RDB +#PBL preamble and RCW header aa55aa55 010e0100 -#SerDes Protocol: 0x66_0x16 -#Core/DDR: 1533Mhz/1600MT/s -120c0017 15000000 00000000 00000000 -66150002 00008400 ec104000 c1000000 -00000000 00000000 00000000 000307fc + +#For T2080 v1.0 +#SerDes=0x66_0x16, Core=1533MHz, DDR=1600MT/s +#120c0017 15000000 00000000 00000000 +#66150002 00008400 ec104000 c1000000 +#00000000 00000000 00000000 000307fc +#00000000 00000000 00000000 00000004 + +#For T2080 v1.1 +#SerDes=0x66_0x15, Core:1800MHz, DDR:1600MT/s +1206001b 15000000 00000000 00000000 +66150002 00000000 e8104000 c1000000 +00800000 00000000 00000000 000307fc 00000000 00000000 00000000 00000004
Signature · 1 line
1.8.0
PATCH v2 1/1 powerpc/t2080: updating rcw for silicon v1.1
Quoted 8 lines · Shengzhou Liu
T2080 v1.1 requires different
MEM_PLL_RATfrom previous v1.0, and also update core frequency to 1.8GHz for v1.1.
We reserve the support for T2080 v1.0 and enable v1.1 by default.Signed-off-by Shengzhou Liu <[email protected]>---
v2: reserve v1.0 support.
Applied to u-boot-mpc85xx, awaiting upstream.
York