DFS referrals support ?
Subsystems (2)
Hi,
We are meeting some issues with DFS referrals when using CIFS for linux. I don't know much about technical details on DFS, but before studying further, I would like to know if this feature is even supposed to be supported by the Linux CIFS client.
To explain the situation, we have several shares :
\\filer\main(main entry point)
\\filer\share1(scattered volumes with data)
\\filer\share2
if \\filer\main\share1points to \\filer\share1(top level) we manage to access the share1 content correctly (so DFS mechanism seems to work)
but if \\filer\main\some\directory\remote\locationpoints to \\filer\share2\dir1\dir2\inside\locationhere we get stuck.
The client can have the following behaviours, more or less with no apparent logic up to now :
* "Object is remote" error
* "No such file or directory" error
* sometimes locked in infinite loop (with the older versions, see below)
* accesses it, but lists the content of \\filer\share2(top level of
the share) not the content of \\filer\share2\dir1\dir2\inside\locationso we loose part of the link's path
With Windows 7 clients, the expected behaviour occurs correctly.
We use up-to-date debian 6.0.10 & 7.6, and CentOS 6.5 (i.e kernels 2.6.32 & 3.2.x) with stock cifs-utils package (2:4.5-2, 2:5.5-1) and the CIFS server is NetApp OnTap 8, with the widelink feature (translation of linux symlinks)
If this should be supported, can you provide information of the parameters to set correctly, or if we have to compile a newer version, which one ?
Thank you,
Franck
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hello Franck,
Yes, DFS is fully supported on the current kernels, but there were some problems on earlier kernels. I can't be certain from the information that you may be running into the remote namespace bug where the final target is not located on the domain controller or the server that you are initially pointed at and the kernel tried to use the existing network connection to communicate with the new machine; you may need to upgrade your kernel. 3.2 is not current. I have personally patched an older 2.6 kernel to work with remote namespaces because management was not in favor of upgrading our kernel but if you are not familiar with the technical details of DFS then that is probably not the right path for you so if you can upgrade your kernel.
-Bob
Quoted 48 lines
Hi,
We are meeting some issues with DFS referrals when using CIFS for linux. I don't know much about technical details on DFS, but before studying further, I would like to know if this feature is even supposed to be supported by the Linux CIFS client.
To explain the situation, we have several shares :
\\filer\main(main entry point)
\\filer\share1(scattered volumes with data)
\\filer\share2if \\filer\main\share1points to \\filer\share1(top level) we manage to access the share1 content correctly (so DFS mechanism seems to work)
but if \\filer\main\some\directory\remote\locationpoints to \\filer\share2\dir1\dir2\inside\locationhere we get stuck.
The client can have the following behaviours, more or less with no apparent logic up to now :
* "Object is remote" error
* "No such file or directory" error
* sometimes locked in infinite loop (with the older versions, see
below)
* accesses it, but lists the content of \\filer\share2(top level of
the share) not the content of \\filer\share2\dir1\dir2\inside\locationso we loose part of the link's pathWith Windows 7 clients, the expected behaviour occurs correctly.
We use up-to-date debian 6.0.10 & 7.6, and CentOS 6.5 (i.e kernels 2.6.32 & 3.2.x) with stock cifs-utils package (2:4.5-2, 2:5.5-1) and the CIFS server is NetApp OnTap 8, with the widelink feature (translation of linux symlinks)
If this should be supported, can you provide information of the parameters to set correctly, or if we have to compile a newer version, which one ?
Thank you,
Franck
--
To unsubscribe from this list: send the line "unsubscribe linux-cifs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): dda8f4838ed40871acc3092c5440d396.squirrel-vQd1aa0lCeAC/Zx7Cl00UAC/[email protected]
Hi Bob,
Thank you for your answer.
Yes, upgrading the kernel can be an option for us, I just wanted to be sure it was worth trying.
I could not find back the bug you mention, to understand how old it is and if it is supposed to be inserted in the kernels we use. However, I'm not sure this connection issue between two servers is our problem since :
1/ we get the problem even when a DFS links goes to the same IP as the mounted share
2/ we do not get problem when fetching a DFS link to the top level of a share which is on a different IP (i.e mounting another filer works well)
I'll try anyway to upgrade the kernel and test, since you confirmed that this is supposed to work.
Have a nice week-end,
Franck
Quoted 64 lines · Bob Balsover
Hello Franck,
Yes, DFS is fully supported on the current kernels, but there were some problems on earlier kernels. I can't be certain from the information that you may be running into the remote namespace bug where the final target is not located on the domain controller or the server that you are initially pointed at and the kernel tried to use the existing network connection to communicate with the new machine; you may need to upgrade your kernel. 3.2 is not current. I have personally patched an older 2.6 kernel to work with remote namespaces because management was not in favor of upgrading our kernel but if you are not familiar with the technical details of DFS then that is probably not the right path for you so if you can upgrade your kernel.
-Bob
Quoted 48 lines
Hi,
We are meeting some issues with DFS referrals when using CIFS for linux. I don't know much about technical details on DFS, but before studying further, I would like to know if this feature is even supposed to be supported by the Linux CIFS client.
To explain the situation, we have several shares :
\\filer\main(main entry point)
\\filer\share1(scattered volumes with data)
\\filer\share2if \\filer\main\share1points to \\filer\share1(top level) we manage to access the share1 content correctly (so DFS mechanism seems to work)
but if \\filer\main\some\directory\remote\locationpoints to \\filer\share2\dir1\dir2\inside\locationhere we get stuck.
The client can have the following behaviours, more or less with no apparent logic up to now :
* "Object is remote" error
* "No such file or directory" error
* sometimes locked in infinite loop (with the older versions, see
below)
* accesses it, but lists the content of \\filer\share2(top level of
the share) not the content of \\filer\share2\dir1\dir2\inside\locationso we loose part of the link's pathWith Windows 7 clients, the expected behaviour occurs correctly.
We use up-to-date debian 6.0.10 & 7.6, and CentOS 6.5 (i.e kernels 2.6.32 & 3.2.x) with stock cifs-utils package (2:4.5-2, 2:5.5-1) and the CIFS server is NetApp OnTap 8, with the widelink feature (translation of linux symlinks)
If this should be supported, can you provide information of the parameters to set correctly, or if we have to compile a newer version, which one ?
Thank you,
Franck
--
To unsubscribe from this list: send the line "unsubscribe linux-cifs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 15 lines · Franck Eyraud
Hi Bob,
Thank you for your answer.
Yes, upgrading the kernel can be an option for us, I just wanted to be sure it was worth trying.I could not find back the bug you mention, to understand how old it is and if it is supposed to be inserted in the kernels we use. However, I'm not sure this connection issue between two servers is our problem since :
1/ we get the problem even when a DFS links goes to the same IP as the mounted share
2/ we do not get problem when fetching a DFS link to the top level of a share which is on a different IP (i.e mounting another filer works well)
Quoted 2 lines
I'll try anyway to upgrade the kernel and test, since you confirmed that this is supposed to work.
What did you find out about behavior of a more current kernel?
(given that your kernel was more than 5 years old, there is a good chance that the behavior has improved in more recent kernels)
Signature · 3 lines
Thanks, Steve
A message that is not in the archive (sent off-list or not yet received): CAH2r5mtOtmhEMgGOq22fy-RQa58c+u=JWwfGOvXh83MyZwb4og-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Quoted 1 line · Steve French
What did you find out about behavior of a more current kernel? (given that your kernel was more than 5 years old, there is a good chance that the behavior has improved in more recent kernels)
Sorry for long delay answer, but this issue was put aside as not critical (first choice to access the filer from Linux clients is NFS). Unfortunately we could not for technical/schedule reasons test other kernels. However, it seems that after a recent upgrade on the NetApp filer to OnTap 8.2.3 this behaviour disappeared from all our systems. So it seems a case of faulty server, and not linked to Linux CIFS client.
Have a good day, and thanks for support.
Franck