arm: exynos: clock: support SPLL as mmc source clock for exynos5420
Subsystems (2)
PATCH 1/1 arm: exynos: clock: support SPLL as mmc source clock for exynos5420
MMC of exynos5420 can select SPLL as source clock, so add to support SPLL in exynos5420_get_mmc_clk(). It was tested on Odroid-XU3 board.
--- arch/arm/cpu/armv7/exynos/clock.c | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/cpu/armv7/exynos/clock.c +2 -0
@@ -848,6 +848,8 @@ static unsigned long exynos5420_get_mmc_clk(int dev_index)if (sel ==0x3 ) sclk =get_pll_clk (MPLL ); +else if (sel ==0x4 ) + sclk =get_pll_clk (SPLL );else if (sel ==0x6 ) sclk =get_pll_clk (EPLL );else
Signature · 1 line
1.9.1
PATCH 1/1 arm: exynos: clock: support SPLL as mmc source clock for exynos5420
Best Regards,
Jaehoon Chung
Quoted 22 lines · Joonyoung Shim
MMC of exynos5420 can select SPLL as source clock, so add to support SPLL in
exynos5420_get_mmc_clk(). It was tested on Odroid-XU3 board.Signed-off-by Joonyoung Shim <[email protected]>--- arch/arm/cpu/armv7/exynos/clock.c | 2 ++ 1 file changed, 2 insertions(+)arch/arm/cpu/armv7/exynos/clock.c +2
-0@@ -848,6 +848,8 @@ static unsigned long exynos5420_get_mmc_clk(int dev_index)if (sel ==0x3 ) sclk =get_pll_clk (MPLL ); +else if (sel ==0x4 ) + sclk =get_pll_clk (SPLL );else if (sel ==0x6 ) sclk =get_pll_clk (EPLL );else
PATCH 1/1 arm: exynos: clock: support SPLL as mmc source clock for exynos5420
In reply to Joonyoung ShimQuoted 14 lines · Joonyoung Shim
MMC of exynos5420 can select SPLL as source clock, so add to support SPLL in
exynos5420_get_mmc_clk(). It was tested on Odroid-XU3 board.Signed-off-by Joonyoung Shim <[email protected]>--- arch/arm/cpu/armv7/exynos/clock.c | 2 ++ 1 file changed, 2 insertions(+)arch/arm/cpu/armv7/exynos/clock.c +0
-0
arch/arm/cpu/armv7/exynos/clock.c static unsigned long exynos5420_get_mmc_clk(int dev_index) · line 855
Quoted 8 lines
arch/arm/cpu/armv7/exynos/clock.c +2
-0@@ -848,6 +848,8 @@ static unsigned long exynos5420_get_mmc_clk(int dev_index)if (sel ==0x3 ) sclk =get_pll_clk (MPLL ); +else if (sel ==0x4 ) + sclk =get_pll_clk (SPLL );else if (sel ==0x6 ) sclk =get_pll_clk (EPLL );else
applied to u-boot-samsung.
Thanks,
Minkyu Kang.