DSD over HDMI: audio data packetization
Hi Community,
I am trying to implement DSD (one bit audio) over HDMI, for Intel integrated graphics. I am referencing HDMI specification 1.3a.
Regarding audio data packetization, I am referencing spec:
5.3.4 Audio Sample Packet
7.6 Audio Data Packetization
Q1) Would you please point to me where is the source code to handle L-PCM audio sample packetization (to implement 5.3.4 Audio Sample Packet)?
Q2) I admit that I did not carefully read HD-Audio specification. Is this possible that this L-PCM audio data packetization is done by *hardware* (e.g HDMI related widgets/pins)?
Q3) Did we implement "7.2 Audio Sample Clock Capture and Regeneration"?
Thanks.
Xuebing Wang
31.12.2014, 15:32, Xuebing Wang kirjoitti:
Quoted 1 line
Hi Community,
Hi,
Quoted 10 lines
I am trying to implement DSD (one bit audio) over HDMI, for Intel integrated graphics. I am referencing HDMI specification 1.3a.
Regarding audio data packetization, I am referencing spec:
5.3.4 Audio Sample Packet
7.6 Audio Data PacketizationQ1) Would you please point to me where is the source code to handle L-PCM audio sample packetization (to implement 5.3.4 Audio Sample Packet)?
It is done by the hardware.
Quoted 3 lines
Q2) I admit that I did not carefully read HD-Audio specification. Is this possible that this L-PCM audio data packetization is done by *hardware* (e.g HDMI related widgets/pins)?
Yes.
Quoted 1 line
Q3) Did we implement "7.2 Audio Sample Clock Capture and Regeneration"?
That is done by hardware. With some HDA codecs the video driver calculates the N/CTS values "manually", but AFAIK not on Intel HW.
Quoted 4 lines
Thanks.
Xuebing Wang
Signature · 1 line
Anssi Hannula
Hi Xuebing,
Quoted 30 lines
-----Original Message-----
From: Anssi Hannula [mailto:[email protected]]
Sent: Wednesday, December 31, 2014 9:41 PM
To: Xuebing Wang
Cc: [email protected]; Yang, Libin; Lin, Mengdong; ; Takashi Iwai; ; Wu Fengguang
Subject: Re: [alsa-devel] DSD over HDMI: audio data packetization31.12.2014, 15:32, Xuebing Wang kirjoitti:
Quoted 1 line
Hi Community,
Hi,
Quoted 10 lines
I am trying to implement DSD (one bit audio) over HDMI, for Intel integrated graphics. I am referencing HDMI specification 1.3a.
Regarding audio data packetization, I am referencing spec:
5.3.4 Audio Sample Packet
7.6 Audio Data PacketizationQ1) Would you please point to me where is the source code to handle L-PCM audio sample packetization (to implement 5.3.4 Audio Sample Packet)?
It is done by the hardware.
Quoted 3 lines
Q2) I admit that I did not carefully read HD-Audio specification. Is this possible that this L-PCM audio data packetization is done by *hardware* (e.g HDMI related widgets/pins)?
Quoted 6 lines
Yes.
Quoted 1 line
Q3) Did we implement "7.2 Audio Sample Clock Capture and Regeneration"?
That is done by hardware. With some HDA codecs the video driver calculates the N/CTS values "manually", but AFAIK not on Intel HW.
As the N/CTS need fs and frequency of TMDS info, the hdmi driver does not implement this feature.
We currently are designing an audio link between audio subsystem and other components, like video or USB.
Maybe we will add the N/CTS information transmission. So we can calculate the N/CTS value in audio or gfx driver.
Quoted 9 lines
Quoted 5 lines
Thanks.
Xuebing Wang--
Anssi Hannula
Anssi, Libin,
Thank you very much for your help.
If L-PCM audio data packetization is done by hardware, is it possible to implement DSD over HDMI on Intel integrated graphics? Thanks again.
Quoted 52 lines · Libin
Hi Xuebing,
Quoted 24 lines
-----Original Message-----
From: Anssi Hannula [mailto:[email protected]]
Sent: Wednesday, December 31, 2014 9:41 PM
To: Xuebing Wang
Cc: [email protected]; Yang, Libin; Lin, Mengdong; ; Takashi Iwai; ; Wu Fengguang
Subject: Re: [alsa-devel] DSD over HDMI: audio data packetization31.12.2014, 15:32, Xuebing Wang kirjoitti:
Quoted 1 line
Hi Community,
Hi,
Quoted 10 lines
I am trying to implement DSD (one bit audio) over HDMI, for Intel integrated graphics. I am referencing HDMI specification 1.3a.
Regarding audio data packetization, I am referencing spec:
5.3.4 Audio Sample Packet
7.6 Audio Data PacketizationQ1) Would you please point to me where is the source code to handle L-PCM audio sample packetization (to implement 5.3.4 Audio Sample Packet)?
It is done by the hardware.
Quoted 8 lines
Quoted 3 lines
Q2) I admit that I did not carefully read HD-Audio specification. Is this possible that this L-PCM audio data packetization is done by *hardware* (e.g HDMI related widgets/pins)?
Yes.
Quoted 1 line
Q3) Did we implement "7.2 Audio Sample Clock Capture and Regeneration"?
That is done by hardware. With some HDA codecs the video driver calculates the N/CTS values "manually", but AFAIK not on Intel HW.
As the N/CTS need fs and frequency of TMDS info, the hdmi driver does not implement this feature.
We currently are designing an audio link between audio subsystem and other components, like video or USB.
Maybe we will add the N/CTS information transmission. So we can calculate the N/CTS value in audio or gfx driver.
Quoted 7 lines
Quoted 4 lines
Thanks.
Xuebing Wang--
Anssi Hannula
Signature · 2 lines
Thanks, Xuebing Wang
31.12.2014, 17:38, Xuebing Wang kirjoitti:
Quoted 6 lines
Anssi, Libin,
Thank you very much for your help.
If L-PCM audio data packetization is done by hardware, is it possible to implement DSD over HDMI on Intel integrated graphics? Thanks again.
I don't think so, unless:
(a) It is possible to somehow encapsulate the stream in Audio Sample Packets and be accepted by the receiver (like e.g. AC3, DTS). I'm not aware of such a way.
or:
(b) There is some undocumented feature in the Intel HDMI codecs allowing the driver to switch to DSD or driver-constructed packets (instead of ASP) in similar way as there is a way to switch to HBR packets.
Quoted 55 lines · Libin
Quoted 52 lines
Hi Xuebing,
Quoted 24 lines
-----Original Message-----
From: Anssi Hannula [mailto:[email protected]]
Sent: Wednesday, December 31, 2014 9:41 PM
To: Xuebing Wang
Cc: [email protected]; Yang, Libin; Lin, Mengdong; ; Takashi Iwai; ; Wu Fengguang
Subject: Re: [alsa-devel] DSD over HDMI: audio data packetization31.12.2014, 15:32, Xuebing Wang kirjoitti:
Quoted 1 line
Hi Community,
Hi,
Quoted 10 lines
I am trying to implement DSD (one bit audio) over HDMI, for Intel integrated graphics. I am referencing HDMI specification 1.3a.
Regarding audio data packetization, I am referencing spec:
5.3.4 Audio Sample Packet
7.6 Audio Data PacketizationQ1) Would you please point to me where is the source code to handle L-PCM audio sample packetization (to implement 5.3.4 Audio Sample Packet)?
It is done by the hardware.
Quoted 8 lines
Quoted 3 lines
Q2) I admit that I did not carefully read HD-Audio specification. Is this possible that this L-PCM audio data packetization is done by *hardware* (e.g HDMI related widgets/pins)?
Yes.
Quoted 1 line
Q3) Did we implement "7.2 Audio Sample Clock Capture and Regeneration"?
That is done by hardware. With some HDA codecs the video driver calculates the N/CTS values "manually", but AFAIK not on Intel HW.
As the N/CTS need fs and frequency of TMDS info, the hdmi driver does not implement this feature.
We currently are designing an audio link between audio subsystem and other components, like video or USB.
Maybe we will add the N/CTS information transmission. So we can calculate the N/CTS value in audio or gfx driver.
Quoted 7 lines
Quoted 4 lines
Thanks.
Xuebing Wang--
Anssi Hannula
Signature · 1 line
Anssi Hannula
Hi,
Quoted 18 lines
-----Original Message-----
From: Anssi Hannula [mailto:[email protected]]
Sent: Wednesday, December 31, 2014 11:45 PM
To: Xuebing Wang
Cc: Yang, Libin; [email protected]; Lin, Mengdong; ; Takashi Iwai; ; Wu Fengguang
Subject: Re: [alsa-devel] DSD over HDMI: audio data packetization31.12.2014, 17:38, Xuebing Wang kirjoitti:
Quoted 6 lines
Anssi, Libin,
Thank you very much for your help.
If L-PCM audio data packetization is done by hardware, is it possible to implement DSD over HDMI on Intel integrated graphics? Thanks again.
I don't think so, unless:
Quoted 9 lines
(a) It is possible to somehow encapsulate the stream in Audio Sample Packets and be accepted by the receiver (like e.g. AC3, DTS). I'm not aware of such a way.
or:
(b) There is some undocumented feature in the Intel HDMI codecs allowing the driver to switch to DSD or driver-constructed packets (instead of ASP) in similar way as there is a way to switch to HBR packets.
Yes, I agree. And I'm not sure whether HDMI spec supports DSD.
Quoted 63 lines
Quoted 31 lines · Libin
Quoted 27 lines
Hi Xuebing,
Quoted 24 lines
-----Original Message-----
From: Anssi Hannula [mailto:[email protected]]
Sent: Wednesday, December 31, 2014 9:41 PM
To: Xuebing Wang
Cc: [email protected]; Yang, Libin; Lin, Mengdong; ; Takashi Iwai; ; Wu Fengguang
Subject: Re: [alsa-devel] DSD over HDMI: audio data packetization31.12.2014, 15:32, Xuebing Wang kirjoitti:
Quoted 1 line
Hi Community,
Hi,
Quoted 10 lines
I am trying to implement DSD (one bit audio) over HDMI, for Intel integrated graphics. I am referencing HDMI specification 1.3a.
Regarding audio data packetization, I am referencing spec:
5.3.4 Audio Sample Packet
7.6 Audio Data PacketizationQ1) Would you please point to me where is the source code to handle L-PCM audio sample packetization (to implement 5.3.4 Audio Sample Packet)?
It is done by the hardware.
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
Q2) I admit that I did not carefully read HD-Audio specification. Is this possible that this L-PCM audio data packetization is done by
*hardware* (e.g HDMI related widgets/pins)?Yes.
Quoted 1 line
Q3) Did we implement "7.2 Audio Sample Clock Capture and
Regeneration"?
Quoted 12 lines
Quoted 12 lines
Quoted 2 lines
That is done by hardware. With some HDA codecs the video driver calculates the N/CTS values "manually", but AFAIK not on Intel HW.
As the N/CTS need fs and frequency of TMDS info, the hdmi driver does not implement this feature.
We currently are designing an audio link between audio subsystem and other components, like video or USB.
Maybe we will add the N/CTS information transmission. So we can calculate the N/CTS value in audio or gfx driver.
Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
Thanks.
Xuebing Wang--
Anssi Hannula--
Anssi Hannula
01.01.2015, 04:07, Yang, Libin kirjoitti:
Quoted 24 lines
Hi,
Quoted 22 lines
-----Original Message-----
From: Anssi Hannula [mailto:[email protected]]
Sent: Wednesday, December 31, 2014 11:45 PM
To: Xuebing Wang
Cc: Yang, Libin; [email protected]; Lin, Mengdong; ; Takashi Iwai; ; Wu Fengguang
Subject: Re: [alsa-devel] DSD over HDMI: audio data packetization31.12.2014, 17:38, Xuebing Wang kirjoitti:
Quoted 6 lines
Anssi, Libin,
Thank you very much for your help.
If L-PCM audio data packetization is done by hardware, is it possible to implement DSD over HDMI on Intel integrated graphics? Thanks again.
I don't think so, unless:
(a) It is possible to somehow encapsulate the stream in Audio Sample Packets and be accepted by the receiver (like e.g. AC3, DTS). I'm not aware of such a way.
Quoted 7 lines
Quoted 5 lines
or:
(b) There is some undocumented feature in the Intel HDMI codecs allowing the driver to switch to DSD or driver-constructed packets (instead of ASP) in similar way as there is a way to switch to HBR packets.Yes, I agree. And I'm not sure whether HDMI spec supports DSD.
It does, via the "One Bit Audio" and "DST" formats (spec 5.3.9, 5.3.10 in 1.3a/1.4a).
Quoted 63 lines
Quoted 63 lines
Quoted 31 lines · Libin
Quoted 27 lines
Hi Xuebing,
Quoted 24 lines
-----Original Message-----
From: Anssi Hannula [mailto:[email protected]]
Sent: Wednesday, December 31, 2014 9:41 PM
To: Xuebing Wang
Cc: [email protected]; Yang, Libin; Lin, Mengdong; ; Takashi Iwai; ; Wu Fengguang
Subject: Re: [alsa-devel] DSD over HDMI: audio data packetization31.12.2014, 15:32, Xuebing Wang kirjoitti:
Quoted 1 line
Hi Community,
Hi,
Quoted 10 lines
I am trying to implement DSD (one bit audio) over HDMI, for Intel integrated graphics. I am referencing HDMI specification 1.3a.
Regarding audio data packetization, I am referencing spec:
5.3.4 Audio Sample Packet
7.6 Audio Data PacketizationQ1) Would you please point to me where is the source code to handle L-PCM audio sample packetization (to implement 5.3.4 Audio Sample Packet)?
It is done by the hardware.
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
Q2) I admit that I did not carefully read HD-Audio specification. Is this possible that this L-PCM audio data packetization is done by
*hardware* (e.g HDMI related widgets/pins)?Yes.
Quoted 1 line
Q3) Did we implement "7.2 Audio Sample Clock Capture and
Regeneration"?
Quoted 12 lines
Quoted 12 lines
Quoted 2 lines
That is done by hardware. With some HDA codecs the video driver calculates the N/CTS values "manually", but AFAIK not on Intel HW.
As the N/CTS need fs and frequency of TMDS info, the hdmi driver does not implement this feature.
We currently are designing an audio link between audio subsystem and other components, like video or USB.
Maybe we will add the N/CTS information transmission. So we can calculate the N/CTS value in audio or gfx driver.
Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
Thanks.
Xuebing Wang--
Anssi Hannula--
Anssi Hannula
Signature · 1 line
Anssi Hannula
Anssi, Libin,
Thanks for your help.
After a little bit of research, I do think it is possible to stream DSD over HDMI (the mechanism is as Anssi mentioned, similar way as HBR).
Please see HDA spec:
3.7.1 Stream Format Structure
(If the TYPE is set to Non-PCM, the controller just pushes data over the link and is not concerned
with formatting. The base rate, data type, and number of Words (MULT) to send each valid frame
are specified to control the rate at which the non-PCM data is sent.)
7.3.3.8 Converter Format
What do you think? In order to implement this similiar mechanism (similar to HBR), I still have some detailed questions that I will write in another email. Thanks.
Quoted 35 lines · Anssi Hannula
01.01.2015, 04:07, Yang, Libin kirjoitti:
Quoted 24 lines
Hi,
Quoted 22 lines
-----Original Message-----
From: Anssi Hannula [mailto:[email protected]]
Sent: Wednesday, December 31, 2014 11:45 PM
To: Xuebing Wang
Cc: Yang, Libin; [email protected]; Lin, Mengdong; ; Takashi Iwai; ; Wu Fengguang
Subject: Re: [alsa-devel] DSD over HDMI: audio data packetization31.12.2014, 17:38, Xuebing Wang kirjoitti:
Quoted 6 lines
Anssi, Libin,
Thank you very much for your help.
If L-PCM audio data packetization is done by hardware, is it possible to implement DSD over HDMI on Intel integrated graphics? Thanks again.
I don't think so, unless:
(a) It is possible to somehow encapsulate the stream in Audio Sample Packets and be accepted by the receiver (like e.g. AC3, DTS). I'm not aware of such a way.
Quoted 7 lines
Quoted 5 lines
or:
(b) There is some undocumented feature in the Intel HDMI codecs allowing the driver to switch to DSD or driver-constructed packets (instead of ASP) in similar way as there is a way to switch to HBR packets.Yes, I agree. And I'm not sure whether HDMI spec supports DSD.
It does, via the "One Bit Audio" and "DST" formats (spec 5.3.9, 5.3.10 in 1.3a/1.4a).
04.01.2015, 05:10, Xuebing Wang kirjoitti:
Quoted 15 lines
Anssi, Libin,
Thanks for your help.
After a little bit of research, I do think it is possible to stream DSD over HDMI (the mechanism is as Anssi mentioned, similar way as HBR).
Please see HDA spec:
3.7.1 Stream Format Structure
(If the TYPE is set to Non-PCM, the controller just pushes data over the link and is not concerned
with formatting. The base rate, data type, and number of Words (MULT) to send each valid frame
are specified to control the rate at which the non-PCM data is sent.)
Quoted 5 lines
7.3.3.8 Converter Format
What do you think? In order to implement this similiar mechanism (similar to HBR), I still have some detailed questions that I will write in another email. Thanks.
That setting will still not allow you to send One-bit audio or DST packets. The stream will still be encapsulated in either ASP or HBR packets, depending on the value of the EPT field (Encoded Packet Type, 7.3.3.13).
Quoted 39 lines · Anssi Hannula
Quoted 35 lines
01.01.2015, 04:07, Yang, Libin kirjoitti:
Quoted 24 lines
Hi,
Quoted 22 lines
-----Original Message-----
From: Anssi Hannula [mailto:[email protected]]
Sent: Wednesday, December 31, 2014 11:45 PM
To: Xuebing Wang
Cc: Yang, Libin; [email protected]; Lin, Mengdong; ; Takashi Iwai; ; Wu Fengguang
Subject: Re: [alsa-devel] DSD over HDMI: audio data packetization31.12.2014, 17:38, Xuebing Wang kirjoitti:
Quoted 6 lines
Anssi, Libin,
Thank you very much for your help.
If L-PCM audio data packetization is done by hardware, is it possible to implement DSD over HDMI on Intel integrated graphics? Thanks again.
I don't think so, unless:
(a) It is possible to somehow encapsulate the stream in Audio Sample Packets and be accepted by the receiver (like e.g. AC3, DTS). I'm not aware of such a way.
Quoted 7 lines
Quoted 5 lines
or:
(b) There is some undocumented feature in the Intel HDMI codecs allowing the driver to switch to DSD or driver-constructed packets (instead of ASP) in similar way as there is a way to switch to HBR packets.Yes, I agree. And I'm not sure whether HDMI spec supports DSD.
It does, via the "One Bit Audio" and "DST" formats (spec 5.3.9, 5.3.10 in 1.3a/1.4a).
Signature · 1 line
Anssi Hannula
A message that is not in the archive (sent off-list or not yet received): CAGzU1+F0Os59UwRXRpZQnibDeT0KLK1UqX__Qv9=agwQTkZWyg@mail.gmail.com
06.01.2015, 06:33, Andrej Falout kirjoitti:
Quoted 1 line
Hi Anssi,
Hi,
Quoted 38 lines
Just wondering how Microsoft documentation fits into this discussion:
"Representing Formats for IEC 61937 Transmissions"
http://msdn.microsoft.com/en-us/library/windows/desktop/dd316761%28v=vs.85%29.aspx
"Microsoft-provided HD Audio class driver supports PCM, AC3, DTS, AAC, Dolby Digital Plus, WMA Pro, MAT(MLP) formats. The GUIDs for the compressed audio formats that are not supported by the HD audio class driver and can be implemented by third-party solutions are listed in the following table. "
CEA 861 Type SubFormat GUID Description
0x0800000008-0cea-0010-8000-00aa00389b71
KSDATAFORMAT_SUBTYPE_IEC61937_ATRACAdaptive Transform Acoustic Coding (ATRAC)
0x0900000009-0cea-0010-8000-00aa00389b71
KSDATAFORMAT_SUBTYPE_IEC61937_ONE_BIT_AUDIOOne-Bit Audio
0x0d0000000d-0cea-0010-8000-00aa00389b71
KSDATAFORMAT_SUBTYPE_IEC61937_DSTDirect Stream Transport (DST)—lossless compressed DSD (Direct Stream
Digital).
Quoted 5 lines
And knowing that IEC 61937 from HDMI 1.3 also supports above 6.144 Mbps...
Is there a doubt that above information is correct, and that DST/DST can be carried over 61937 in Microsoft HDA class driver, in this example, by "implementing a third-party solution" as described in this table?
I think the One-Bit Audio and DST formats are just misnamed here and can't be carried over IEC 61937 (ATRAC can be) - the IEC 61937 specification does not cover One-Bit Audio or DST.
I think the "third-party solution" refers to a driver implementing support for a non-HDA-spec HW feature which allows One-Bit audio / DST / raw packets to be transmitted (in a similar way "EPT" (Encoded Packet Type field in Pin Widget Control 7.3.3.13) allows setting HBR or ASP packet transmission).
Quoted 88 lines
Thanks,
Andrej FaloutOn Mon, Jan 5, 2015 at 4:46 PM, Anssi Hannula <[email protected] <mailto:[email protected]>> wrote:
04.01.2015, 05:10, Xuebing Wang kirjoitti:
> Anssi, Libin,
>
> Thanks for your help.
>
> After a little bit of research, I do think it is possible to stream DSD > over HDMI (the mechanism is as Anssi mentioned, similar way as HBR). >
> Please see HDA spec:
> 3.7.1 Stream Format Structure
> (If the TYPE is set to Non-PCM, the controller just pushes data over the > link and is not concerned
> with formatting. The base rate, data type, and number of Words (MULT) to > send each valid frame
> are specified to control the rate at which the non-PCM data is sent.) >
> 7.3.3.8 Converter Format
>
> What do you think? In order to implement this similiar mechanism > (similar to HBR), I still have some detailed questions that I will write > in another email. Thanks.That setting will still not allow you to send One-bit audio or DST packets. The stream will still be encapsulated in either ASP or HBR packets, depending on the value of the EPT field (Encoded Packet Type, 7.3.3.13).
>
> On Thu, 2015-01-01 at 06:37 +0200, Anssi Hannula wrote:
>> 01.01.2015, 04:07, Yang, Libin kirjoitti:
>>> Hi,
>>>
>>>> -----Original Message-----
>>>> From: Anssi Hannula [mailto:[email protected] <mailto:[email protected]>]
>>>> Sent: Wednesday, December 31, 2014 11:45 PM
>>>> To: Xuebing Wang
>>>> Cc: Yang, Libin; [email protected] <mailto:[email protected]>; Lin, Mengdong; ; Takashi Iwai; ; >>>> Wu Fengguang
>>>> Subject: Re: [alsa-devel] DSD over HDMI: audio data packetization >>>>
>>>> 31.12.2014, 17:38, Xuebing Wang kirjoitti:
>>>>> Anssi, Libin,
>>>>>
>>>>> Thank you very much for your help.
>>>>>
>>>>> If L-PCM audio data packetization is done by hardware, is it possible
>>>>> to implement DSD over HDMI on Intel integrated graphics? Thanks again.
>>>>
>>>> I don't think so, unless:
>>>>
>>>> (a) It is possible to somehow encapsulate the stream in Audio Sample
>>>> Packets and be accepted by the receiver (like e.g. AC3, DTS). I'm not aware of
>>>> such a way.
>>>>
>>>> or:
>>>> (b) There is some undocumented feature in the Intel HDMI codecs allowing
>>>> the driver to switch to DSD or driver-constructed packets (instead of
>>>> ASP) in similar way as there is a way to switch to HBR packets. >>>>
>>>
>>> Yes, I agree. And I'm not sure whether HDMI spec supports DSD. >>
>> It does, via the "One Bit Audio" and "DST" formats (spec 5.3.9, 5.3.10
>> in 1.3a/1.4a).
>
>--
Anssi Hannula
Signature · 5 lines
Anssi Hannula _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Hi Anssi,
I think the One-Bit Audio and DST formats are just misnamed here and
Quoted 3 lines
can't be carried over IEC 61937 (ATRAC can be) - the IEC 61937 specification does not cover One-Bit Audio or DST.
Does it have to be? Given that it is defined in CEA 861, and that 61937-1 makes specific provisions for non-PCM data:
Page 16:
"In cases where the interface is used to convey non-linear PCM audio bitstreams..."
Quoted 8 lines
I think the "third-party solution" refers to a driver implementing support for a non-HDA-spec HW feature which allows One-Bit audio / DST / raw packets to be transmitted (in a similar way "EPT" (Encoded Packet Type field in Pin Widget Control 7.3.3.13) allows setting HBR or ASP packet transmission).
Why would an "HW feature" be required to "allows One-Bit audio / DST / raw packets to be transmitted"?
What would such "HW feature" do? What could it possibly do?
Thanks,
Andrej Falout
Quoted 103 lines
Quoted 7 lines
Thanks,
Andrej FaloutOn Mon, Jan 5, 2015 at 4:46 PM, Anssi Hannula <[email protected] <mailto:[email protected]>> wrote:
Quoted 6 lines
04.01.2015, 05:10, Xuebing Wang kirjoitti:
> Anssi, Libin,
>
> Thanks for your help.
>
> After a little bit of research, I do think it is possible tostream DSD
Quoted 1 line
Quoted 1 line
over HDMI (the mechanism is as Anssi mentioned, similar way as
HBR).
Quoted 4 lines
Quoted 4 lines
Please see HDA spec:
3.7.1 Stream Format Structure
(If the TYPE is set to Non-PCM, the controller just pushes dataover the
Quoted 2 lines
Quoted 2 lines
link and is not concerned
with formatting. The base rate, data type, and number of Words(MULT) to
Quoted 2 lines
Quoted 2 lines
send each valid frame
are specified to control the rate at which the non-PCM data issent.)
Quoted 5 lines
Quoted 5 lines
7.3.3.8 Converter Format
What do you think? In order to implement this similiar mechanism (similar to HBR), I still have some detailed questions that I will
write
Quoted 5 lines
Quoted 1 line
in another email. Thanks.
That setting will still not allow you to send One-bit audio or DST packets. The stream will still be encapsulated in either ASP or HBR packets, depending on the value of the EPT field (Encoded Packet
Type,
Quoted 7 lines
7.3.3.13). > > On Thu, 2015-01-01 at 06:37 +0200, Anssi Hannula wrote: >> 01.01.2015, 04:07, Yang, Libin kirjoitti: >>> Hi,Quoted 8 lines
>>> >>>> -----Original Message----- >>>> From: Anssi Hannula [mailto:[email protected] <mailto:[email protected]>] >>>> Sent: Wednesday, December 31, 2014 11:45 PM >>>> To: Xuebing Wang >>>> Cc: Yang, Libin; [email protected] <mailto:[email protected]>; Lin, Mengdong; ; TakashiIwai; ;
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Wu Fengguang
Subject: Re: [alsa-devel] DSD over HDMI: audio datapacketization
Quoted 30 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
31.12.2014, 17:38, Xuebing Wang kirjoitti:
Quoted 5 lines
Anssi, Libin,
Thank you very much for your help.
If L-PCM audio data packetization is done by hardware, is it
possible >>>>> to implement DSD over HDMI on Intel integrated graphics? Thanks again. >>>> >>>> I don't think so, unless: >>>> >>>> (a) It is possible to somehow encapsulate the stream in Audio Sample >>>> Packets and be accepted by the receiver (like e.g. AC3, DTS). I'm not aware of >>>> such a way. >>>> >>>> or: >>>> (b) There is some undocumented feature in the Intel HDMI codecs allowing >>>> the driver to switch to DSD or driver-constructed packets (instead of >>>> ASP) in similar way as there is a way to switch to HBR packets. >>>> >>> >>> Yes, I agree. And I'm not sure whether HDMI spec supports DSD. >> >> It does, via the "One Bit Audio" and "DST" formats (spec 5.3.9,Quoted 10 lines
5.3.10 >> in 1.3a/1.4a). > > -- Anssi Hannula--
Anssi Hannula
06.01.2015, 08:15, Andrej Falout kirjoitti:
Quoted 1 line
Hi Anssi,
Hi,
Quoted 5 lines
Quoted 4 lines
I think the One-Bit Audio and DST formats are just misnamed here and can't be carried over IEC 61937 (ATRAC can be) - the IEC 61937 specification does not cover One-Bit Audio or DST.
Quoted 7 lines
Does it have to be? Given that it is defined in CEA 861, and that 61937-1 makes specific provisions for non-PCM data:
Page 16:
"In cases where the interface is used to convey non-linear PCM audio bitstreams..."
IEC 61937 *is* about transmitting non-PCM data. The specification specifies how to encapsulate AC-3, MPEG-x, DTS, ATRAC, WMA etc for transmission over IEC 60958 link. It does not specify anything about One-Bit Audio or DST (see e.g. "Table 2 - Data-types" in IEC 61937-2 for a list of supported types of which you need to select one).
Quoted 8 lines
Quoted 8 lines
I think the "third-party solution" refers to a driver implementing support for a non-HDA-spec HW feature which allows One-Bit audio / DST / raw packets to be transmitted (in a similar way "EPT" (Encoded Packet Type field in Pin Widget Control 7.3.3.13) allows setting HBR or ASP packet transmission).
Quoted 4 lines
Why would an "HW feature" be required to "allows One-Bit audio / DST / raw packets to be transmitted"?
What would such "HW feature" do? What could it possibly do?
It would allow transmission of One Bit Audio Sample Packets (HDMI spec 1.3a 5.3.9) or DST Audio Packets (HDMI spec 5.3.10), which is not possible with HW that simply implements HDA specification. The HDA specification only supports transmission of Audio Sample Packets (HDMI spec 5.3.4) and High-Bitrate Audio Stream Packets (HDMI spec 5.3.11), selectable via the EPT field (HDA spec 7.3.3.13).
The packet header (which e.g. identifies the packet type) is generated by HW on HDA cards.
Uncompressed PCM is transmitted using ASP packets.
IEC 61937 is transmitted using ASP packets (<=6.144Mbps) or HBR packets (>6.144Mbps).
Quoted 111 lines
Thanks,
Andrej FaloutQuoted 103 lines
Quoted 7 lines
Thanks,
Andrej FaloutOn Mon, Jan 5, 2015 at 4:46 PM, Anssi Hannula <[email protected] <mailto:[email protected]>> wrote:
Quoted 6 lines
04.01.2015, 05:10, Xuebing Wang kirjoitti:
> Anssi, Libin,
>
> Thanks for your help.
>
> After a little bit of research, I do think it is possible tostream DSD
Quoted 1 line
Quoted 1 line
over HDMI (the mechanism is as Anssi mentioned, similar way as
HBR).
Quoted 4 lines
Quoted 4 lines
Please see HDA spec:
3.7.1 Stream Format Structure
(If the TYPE is set to Non-PCM, the controller just pushes dataover the
Quoted 2 lines
Quoted 2 lines
link and is not concerned
with formatting. The base rate, data type, and number of Words(MULT) to
Quoted 2 lines
Quoted 2 lines
send each valid frame
are specified to control the rate at which the non-PCM data issent.)
Quoted 5 lines
Quoted 5 lines
7.3.3.8 Converter Format
What do you think? In order to implement this similiar mechanism (similar to HBR), I still have some detailed questions that I will
write
Quoted 5 lines
Quoted 1 line
in another email. Thanks.
That setting will still not allow you to send One-bit audio or DST packets. The stream will still be encapsulated in either ASP or HBR packets, depending on the value of the EPT field (Encoded Packet
Type,
Quoted 7 lines
7.3.3.13). > > On Thu, 2015-01-01 at 06:37 +0200, Anssi Hannula wrote: >> 01.01.2015, 04:07, Yang, Libin kirjoitti: >>> Hi,Quoted 8 lines
>>> >>>> -----Original Message----- >>>> From: Anssi Hannula [mailto:[email protected] <mailto:[email protected]>] >>>> Sent: Wednesday, December 31, 2014 11:45 PM >>>> To: Xuebing Wang >>>> Cc: Yang, Libin; [email protected] <mailto:[email protected]>; Lin, Mengdong; ; TakashiIwai; ;
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Wu Fengguang
Subject: Re: [alsa-devel] DSD over HDMI: audio datapacketization
Quoted 30 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
31.12.2014, 17:38, Xuebing Wang kirjoitti:
Quoted 5 lines
Anssi, Libin,
Thank you very much for your help.
If L-PCM audio data packetization is done by hardware, is it
possible >>>>> to implement DSD over HDMI on Intel integrated graphics? Thanks again. >>>> >>>> I don't think so, unless: >>>> >>>> (a) It is possible to somehow encapsulate the stream in Audio Sample >>>> Packets and be accepted by the receiver (like e.g. AC3, DTS). I'm not aware of >>>> such a way. >>>> >>>> or: >>>> (b) There is some undocumented feature in the Intel HDMI codecs allowing >>>> the driver to switch to DSD or driver-constructed packets (instead of >>>> ASP) in similar way as there is a way to switch to HBR packets. >>>> >>> >>> Yes, I agree. And I'm not sure whether HDMI spec supports DSD. >> >> It does, via the "One Bit Audio" and "DST" formats (spec 5.3.9,Quoted 10 lines
5.3.10 >> in 1.3a/1.4a). > > -- Anssi Hannula--
Anssi Hannula
Signature · 1 line
Anssi Hannula
Andrej,
I have a slight doubt about
"KSDATAFORMAT_SUBTYPE_IEC61937_ONE_BIT_AUDIO".
To be concise "IEC61937_ONE_BIT_AUDIO"
I do not have all IEC 61937 specs, I can not find
"IEC61937_ONE_BIT_AUDIO" in the list below.
Part 1: General
Part 2: Burst-info
Part 3: Non-linear PCM bitstreams according to the AC-3 format Part 4: Non-linear PCM bitstreams according to the MPEG audio format Part 5: Non-linear PCM bitstreams according to the DTS (Digital Theater Systems) format(s)
Part 6: Non-linear PCM bitstreams according to the MPEG-2 AAC and MPEG-4 AAC audio formats
Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats
Part 8: Non-linear PCM bitstreams according to the Windows Media Audio (WMA) Professional format
Part 9: Non-linear PCM bitstreams according to the MAT format Part 10: Non-linear PCM bitstreams according to the MPEG-4 audio lossless coding (ALS) format - Edition 1.0
Part 11: MPEG-4 AAC and its extensions in LATM/LOAS
Part 12: Non-linear PCM bitstreams according to the DRA formats
Thanks.
Quoted 155 lines · Andrej Falout
Hi Anssi,
Just wondering how Microsoft documentation fits into this discussion:
"Representing Formats for IEC 61937 Transmissions"
http://msdn.microsoft.com/en-us/library/windows/desktop/dd316761%
28v=vs.85%29.aspx"Microsoft-provided HD Audio class driver supports PCM, AC3, DTS, AAC, Dolby Digital Plus, WMA Pro, MAT(MLP) formats. The GUIDs for the compressed audio formats that are not supported by the HD audio class driver and can be implemented by third-party solutions are listed in the following table. "
CEA 861 Type
SubFormat GUID
Description0x08
00000008-0cea-0010-8000-00aa00389b71
KSDATAFORMAT_SUBTYPE_IEC61937_ATRACAdaptive Transform
Acoustic Coding (ATRAC)0x09
00000009-0cea-0010-8000-00aa00389b71
KSDATAFORMAT_SUBTYPE_IEC61937_ONE_BIT_AUDIOOne-Bit Audio
0x0d
0000000d-0cea-0010-8000-00aa00389b71
KSDATAFORMAT_SUBTYPE_IEC61937_DSTDirect Stream Transport
(DST)—lossless
compressed DSD (Direct
Stream Digital).And knowing that IEC 61937 from HDMI 1.3 also supports above 6.144 Mbps...
Is there a doubt that above information is correct, and that DST/DST can be carried over 61937 in Microsoft HDA class driver, in this example, by "implementing a third-party solution" as described in this table?
Thanks,
Andrej Falout
On Mon, Jan 5, 2015 at 4:46 PM, Anssi Hannula <[email protected]> wrote:
04.01.2015, 05:10, Xuebing Wang kirjoitti:
> Anssi, Libin,
>
> Thanks for your help.
>
> After a little bit of research, I do think it is possible to stream DSD
> over HDMI (the mechanism is as Anssi mentioned, similar way as HBR).
>
> Please see HDA spec:
> 3.7.1 Stream Format Structure
> (If the TYPE is set to Non-PCM, the controller just pushes data over the
> link and is not concerned
> with formatting. The base rate, data type, and number of Words (MULT) to
> send each valid frame
> are specified to control the rate at which the non-PCM data is sent.)
>
> 7.3.3.8 Converter Format
>
> What do you think? In order to implement this similiar mechanism
> (similar to HBR), I still have some detailed questions that I will write
> in another email. Thanks.That setting will still not allow you to send One-bit audio or DST
packets. The stream will still be encapsulated in either ASP or HBR
packets, depending on the value of the EPT field (Encoded Packet Type,
7.3.3.13).>
> On Thu, 2015-01-01 at 06:37 +0200, Anssi Hannula wrote:
>> 01.01.2015, 04:07, Yang, Libin kirjoitti:
>>> Hi,
>>>
>>>> -----Original Message-----
>>>> From: Anssi Hannula [mailto:[email protected]] >>>> Sent: Wednesday, December 31, 2014 11:45 PM >>>> To: Xuebing Wang
>>>> Cc: Yang, Libin; [email protected]; Lin, Mengdong; ; Takashi Iwai; ;
>>>> Wu Fengguang
>>>> Subject: Re: [alsa-devel] DSD over HDMI: audio data packetization
>>>>
>>>> 31.12.2014, 17:38, Xuebing Wang kirjoitti:
>>>>> Anssi, Libin,
>>>>>
>>>>> Thank you very much for your help.
>>>>>
>>>>> If L-PCM audio data packetization is done by hardware, is it possible
>>>>> to implement DSD over HDMI on Intel integrated graphics? Thanks again.
>>>>
>>>> I don't think so, unless:
>>>>
>>>> (a) It is possible to somehow encapsulate the stream in Audio Sample
>>>> Packets and be accepted by the receiver (like e.g. AC3, DTS). I'm not aware of
>>>> such a way.
>>>>
>>>> or:
>>>> (b) There is some undocumented feature in the Intel HDMI codecs allowing
>>>> the driver to switch to DSD or driver-constructed packets (instead of
>>>> ASP) in similar way as there is a way to switch to HBR packets.
>>>>
>>>
>>> Yes, I agree. And I'm not sure whether HDMI spec supports DSD.
>>
>> It does, via the "One Bit Audio" and "DST" formats (spec 5.3.9, 5.3.10
>> in 1.3a/1.4a).
>
>
Quoted 4 lines
--
Anssi Hannula
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel