ARM: atmel: cleanup: remove at91cap9 related code
Subsystems (3)
PATCH 1/1 ARM: atmel: cleanup: remove at91cap9 related code
As the at91cap9adk board is removed by commit: b5508344 (ARM: remove broken "at91cap9adk" board), so the at91cap9 code is not used anymore, and also the document for at91cap9 can not be found on www.atmel.com, so remove the at91cap9 related code.
---
arch/arm/cpu/arm926ejs/at91/Makefile | 1 - arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c | 189 ----------------------- arch/arm/include/asm/arch-at91/at91_pmc.h | 9 +- arch/arm/include/asm/arch-at91/at91cap9.h | 78 ---------- arch/arm/include/asm/arch-at91/at91cap9_matrix.h | 129 ---------------- arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 - arch/arm/include/asm/arch-at91/hardware.h | 2 - drivers/video/atmel_lcdfb.c | 2 +- 8 files changed, 4 insertions(+), 408 deletions(-) delete mode 100644 arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c delete mode 100644 arch/arm/include/asm/arch-at91/at91cap9.h delete mode 100644 arch/arm/include/asm/arch-at91/at91cap9_matrix.h
arch/arm/cpu/arm926ejs/at91/Makefile +0 -1
@@ -5,7 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_AT91CAP9) += at91cap9_devices.o obj-$(CONFIG_AT91SAM9260) += at91sam9260_devices.o obj-$(CONFIG_AT91SAM9G20) += at91sam9260_devices.o obj-$(CONFIG_AT91SAM9XE) += at91sam9260_devices.o
arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c deleted +0 -189
189 lines not on this page · raw message
arch/arm/include/asm/arch-at91/at91_pmc.h +3 -6
@@ -157,10 +157,8 @@ typedef struct at91_pmc {#define AT91_PMC_PCK (1 << 0)/* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1)/* USB Devcice Port Clock [AT91RM9200 only] */ #define AT91RM9200_PMC_MCKUDP (1 << 2)/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91CAP9_PMC_DDR (1 << 2)/* DDR Clock [AT91CAP9 revC only] */ #define AT91RM9200_PMC_UHP (1 << 4)/* USB Host Port Clock [AT91RM9200 only] */ #define AT91SAM926x_PMC_UHP (1 << 6)/* USB Host Port Clock [AT91SAM926x only] */ -#define AT91CAP9_PMC_UHP (1 << 6)/* USB Host Port Clock [AT91CAP9 only] */ #define AT91SAM926x_PMC_UDP (1 << 7)/* USB Devcice Port Clock [AT91SAM926x only] */ #define AT91_PMC_PCK0 (1 << 8)/* Programmable Clock 0 */ #define AT91_PMC_PCK1 (1 << 9)/* Programmable Clock 1 */
@@ -175,7 +173,7 @@ typedef struct at91_pmc {#define AT91_PMC_BIASCOUNT (0xf << 28)/* UTMI PLL Start-up Time */ #define AT91_PMC_MOSCEN (1 << 0)/* Main Oscillator Enable */ -#define AT91_PMC_OSCBYPASS (1 << 1)/* Oscillator Bypass [SAM9x, CAP9] */ +#define AT91_PMC_OSCBYPASS (1 << 1)/* Oscillator Bypass [SAM9x] */ #define AT91_PMC_OSCOUNT (0xff << 8)/* Main Oscillator Start-up Time */ #define AT91_PMC_MAINF (0xffff << 0)/* Main Clock Frequency */
@@ -210,7 +208,7 @@ typedef struct at91_pmc {#define AT91RM9200_PMC_MDIV_2 (1 << 8)#define AT91RM9200_PMC_MDIV_3 (2 << 8)#define AT91RM9200_PMC_MDIV_4 (3 << 8) -#define AT91SAM9_PMC_MDIV_1 (0 << 8)/* [SAM9,CAP9 only] */ +#define AT91SAM9_PMC_MDIV_1 (0 << 8)/* [SAM9 only] */ #define AT91SAM9_PMC_MDIV_2 (1 << 8)#define AT91SAM9_PMC_MDIV_4 (2 << 8)#define AT91SAM9_PMC_MDIV_3 (3 << 8)/* [some SAM9 only] */
@@ -230,8 +228,7 @@ typedef struct at91_pmc {#define AT91_PMC_LOCKA (1 << 1)/* PLLA Lock */ #define AT91_PMC_LOCKB (1 << 2)/* PLLB Lock */ #define AT91_PMC_MCKRDY (1 << 3)/* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6)/* UPLL Lock [AT91CAP9 only] */ -#define AT91_PMC_OSCSEL (1 << 7)/* Slow Clock Oscillator [AT91CAP9 revC only] */ +#define AT91_PMC_LOCKU (1 << 6)/* UPLL Lock */ #define AT91_PMC_PCK0RDY (1 << 8)/* Programmable Clock 0 */ #define AT91_PMC_PCK1RDY (1 << 9)/* Programmable Clock 1 */ #define AT91_PMC_PCK2RDY (1 << 10)/* Programmable Clock 2 */
arch/arm/include/asm/arch-at91/at91cap9.h deleted +0 -78
78 lines not on this page · raw message
arch/arm/include/asm/arch-at91/at91cap9_matrix.h deleted +0 -129
129 lines not on this page · raw message
arch/arm/include/asm/arch-at91/at91sam9_matrix.h +0 -2
@@ -15,8 +15,6 @@#include <asm/arch/at91sam9263_matrix.h> #elif defined(CONFIG_AT91SAM9RL )#include <asm/arch/at91sam9rl_matrix.h> -#elif defined(CONFIG_AT91CAP9 ) -#include <asm/arch/at91cap9_matrix.h> #elif defined(CONFIG_AT91SAM9G45 ) || defined(CONFIG_AT91SAM9M10G45 )#include <asm/arch/at91sam9g45_matrix.h> #elif defined(CONFIG_AT91SAM9N12 ) || defined(CONFIG_AT91SAM9X5 )
arch/arm/include/asm/arch-at91/hardware.h +0 -2
@@ -23,8 +23,6 @@# include <asm/arch/at91sam9g45.h> #elif defined(CONFIG_AT91SAM9N12 ) || defined(CONFIG_AT91SAM9X5 )# include <asm/arch/at91sam9x5.h> -#elif defined(CONFIG_AT91CAP9 ) -# include <asm/arch/at91cap9.h> #elif defined(CONFIG_SAMA5D3 )# include <asm/arch/sama5d3.h> #elif defined(CONFIG_SAMA5D4 )
drivers/video/atmel_lcdfb.c +1 -1
@@ -20,7 +20,7 @@#define ATMEL_LCDC_GUARD_TIME 1#endif -#if defined(CONFIG_AT91SAM9263 ) || defined(CONFIG_AT91CAP9 ) +#if defined(CONFIG_AT91SAM9263 )#define ATMEL_LCDC_FIFO_SIZE 2048#else #define ATMEL_LCDC_FIFO_SIZE 512
Signature · 1 line
2.3.0.rc0
PATCH 1/1 ARM: atmel: cleanup: remove at91cap9 related code
Quoted 7 lines · Bo Shen
As the at91cap9adk board is removed by commit:
b5508344(ARM: remove broken "at91cap9adk" board), so the at91cap9 code is not used anymore, and also the document for at91cap9 can not be found on www.atmel.com, so remove the at91cap9 related code.Signed-off-by Bo Shen <[email protected]>
Quoted 524 lines
---
arch/arm/cpu/arm926ejs/at91/Makefile | 1 - arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c | 189 ----------------------- arch/arm/include/asm/arch-at91/at91_pmc.h | 9 +- arch/arm/include/asm/arch-at91/at91cap9.h | 78 ---------- arch/arm/include/asm/arch-at91/at91cap9_matrix.h | 129 ---------------- arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 - arch/arm/include/asm/arch-at91/hardware.h | 2 - drivers/video/atmel_lcdfb.c | 2 +- 8 files changed, 4 insertions(+), 408 deletions(-) delete mode 100644 arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c delete mode 100644 arch/arm/include/asm/arch-at91/at91cap9.h delete mode 100644 arch/arm/include/asm/arch-at91/at91cap9_matrix.harch/arm/cpu/arm926ejs/at91/Makefile +0
-1@@ -5,7 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_AT91CAP9) += at91cap9_devices.o obj-$(CONFIG_AT91SAM9260) += at91sam9260_devices.o obj-$(CONFIG_AT91SAM9G20) += at91sam9260_devices.o obj-$(CONFIG_AT91SAM9XE) += at91sam9260_devices.oarch/arm/cpu/arm926ejs/at91/at91cap9_devices.c deleted +0
-189@@ -1,189 +0,0 @@ -/* -* (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> -* Lead Tech Design <www.leadtechdesign.com> -* -* (C) Copyright 2009 -* Daniel Gorsulowski <[email protected]> -* esd electronic system design gmbh <www.esd.eu> -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> -#include <asm/arch/io.h> - -void at91_serial0_hw_init (void ) -{ -at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE ; - -at91_set_a_periph (AT91_PIO_PORTA ,22 ,1 );/* TXD0 */ -at91_set_a_periph (AT91_PIO_PORTA ,23 ,0 );/* RXD0 */ -writel (1 <<AT91CAP9_ID_US0 , &pmc->pcer); -} - -void at91_serial1_hw_init (void ) -{ -at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE ; - -at91_set_a_periph (AT91_PIO_PORTD ,0 ,1 );/* TXD1 */ -at91_set_a_periph (AT91_PIO_PORTD ,1 ,0 );/* RXD1 */ -writel (1 <<AT91CAP9_ID_US1 , &pmc->pcer); -} - -void at91_serial2_hw_init (void ) -{ -at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE ; - -at91_set_a_periph (AT91_PIO_PORTD ,2 ,1 );/* TXD2 */ -at91_set_a_periph (AT91_PIO_PORTD ,3 ,0 );/* RXD2 */ -writel (1 <<AT91CAP9_ID_US2 , &pmc->pcer); -} - -void at91_serial3_hw_init (void ) -{ -at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE ; - -at91_set_a_periph (AT91_PIO_PORTC ,30 ,0 );/* DRXD */ -at91_set_a_periph (AT91_PIO_PORTC ,31 ,1 );/* DTXD */ -writel (1 <<AT91_ID_SYS , &pmc->pcer); -} - -void at91_serial_hw_init (void ) -{ -#ifdef CONFIG_USART0 -at91_serial0_hw_init (); -#endif - -#ifdef CONFIG_USART1 -at91_serial1_hw_init (); -#endif - -#ifdef CONFIG_USART2 -at91_serial2_hw_init (); -#endif - -#ifdef CONFIG_USART3 /* DBGU */ -at91_serial3_hw_init (); -#endif -} - -#ifdef CONFIG_HAS_DATAFLASH -void at91_spi0_hw_init (unsigned long cs_mask) -{ -at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE ; - -at91_set_b_periph (AT91_PIO_PORTA ,0 ,0 );/* SPI0_MISO */ -at91_set_b_periph (AT91_PIO_PORTA ,1 ,0 );/* SPI0_MOSI */ -at91_set_b_periph (AT91_PIO_PORTA ,2 ,0 );/* SPI0_SPCK */ - -/* Enable clock */ -writel (1 <<AT91CAP9_ID_SPI0 , &pmc->pcer); - -if (cs_mask & (1 <<0 )) { -at91_set_b_periph (AT91_PIO_PORTA ,5 ,1 ); - } -if (cs_mask & (1 <<1 )) { -at91_set_b_periph (AT91_PIO_PORTA ,3 ,1 ); - } -if (cs_mask & (1 <<2 )) { -at91_set_b_periph (AT91_PIO_PORTD ,0 ,1 ); - } -if (cs_mask & (1 <<3 )) { -at91_set_b_periph (AT91_PIO_PORTD ,1 ,1 ); - } -if (cs_mask & (1 <<4 )) { -at91_set_pio_output (AT91_PIO_PORTA ,5 ,1 ); - } -if (cs_mask & (1 <<5 )) { -at91_set_pio_output (AT91_PIO_PORTA ,3 ,1 ); - } -if (cs_mask & (1 <<6 )) { -at91_set_pio_output (AT91_PIO_PORTD ,0 ,1 ); - } -if (cs_mask & (1 <<7 )) { -at91_set_pio_output (AT91_PIO_PORTD ,1 ,1 ); - } -} - -void at91_spi1_hw_init (unsigned long cs_mask) -{ -at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE ; - -at91_set_a_periph (AT91_PIO_PORTB ,12 ,0 );/* SPI1_MISO */ -at91_set_a_periph (AT91_PIO_PORTB ,13 ,0 );/* SPI1_MOSI */ -at91_set_a_periph (AT91_PIO_PORTB ,14 ,0 );/* SPI1_SPCK */ - -/* Enable clock */ -writel (1 <<AT91CAP9_ID_SPI1 , &pmc->pcer); - -if (cs_mask & (1 <<0 )) { -at91_set_a_periph (AT91_PIO_PORTB ,15 ,1 ); - } -if (cs_mask & (1 <<1 )) { -at91_set_a_periph (AT91_PIO_PORTB ,16 ,1 ); - } -if (cs_mask & (1 <<2 )) { -at91_set_a_periph (AT91_PIO_PORTB ,17 ,1 ); - } -if (cs_mask & (1 <<3 )) { -at91_set_a_periph (AT91_PIO_PORTB ,18 ,1 ); - } -if (cs_mask & (1 <<4 )) { -at91_set_pio_output (AT91_PIO_PORTB ,15 ,1 ); - } -if (cs_mask & (1 <<5 )) { -at91_set_pio_output (AT91_PIO_PORTB ,16 ,1 ); - } -if (cs_mask & (1 <<6 )) { -at91_set_pio_output (AT91_PIO_PORTB ,17 ,1 ); - } -if (cs_mask & (1 <<7 )) { -at91_set_pio_output (AT91_PIO_PORTB ,18 ,1 ); - } - -} -#endif - -#ifdef CONFIG_MACB -void at91_macb_hw_init (void ) -{ -at91_set_a_periph (AT91_PIO_PORTB ,21 ,0 );/* ETXCK_EREFCK */ -at91_set_a_periph (AT91_PIO_PORTB ,22 ,0 );/* ERXDV */ -at91_set_a_periph (AT91_PIO_PORTB ,25 ,0 );/* ERX0 */ -at91_set_a_periph (AT91_PIO_PORTB ,26 ,0 );/* ERX1 */ -at91_set_a_periph (AT91_PIO_PORTB ,27 ,0 );/* ERXER */ -at91_set_a_periph (AT91_PIO_PORTB ,28 ,0 );/* ETXEN */ -at91_set_a_periph (AT91_PIO_PORTB ,23 ,0 );/* ETX0 */ -at91_set_a_periph (AT91_PIO_PORTB ,24 ,0 );/* ETX1 */ -at91_set_a_periph (AT91_PIO_PORTB ,30 ,0 );/* EMDIO */ -at91_set_a_periph (AT91_PIO_PORTB ,29 ,0 );/* EMDC */ - -#ifndef CONFIG_RMII -at91_set_b_periph (AT91_PIO_PORTC ,25 ,0 );/* ECRS */ -at91_set_b_periph (AT91_PIO_PORTC ,26 ,0 );/* ECOL */ -at91_set_b_periph (AT91_PIO_PORTC ,22 ,0 );/* ERX2 */ -at91_set_b_periph (AT91_PIO_PORTC ,23 ,0 );/* ERX3 */ -at91_set_b_periph (AT91_PIO_PORTC ,27 ,0 );/* ERXCK */ -at91_set_b_periph (AT91_PIO_PORTC ,20 ,0 );/* ETX2 */ -at91_set_b_periph (AT91_PIO_PORTC ,21 ,0 );/* ETX3 */ -at91_set_b_periph (AT91_PIO_PORTC ,24 ,0 );/* ETXER */ -#endif -} -#endif - -#ifdef CONFIG_AT91_CAN -void at91_can_hw_init (void ) -{ -at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE ; - -at91_set_a_periph (AT91_PIO_PORTA ,12 ,0 );/* CAN_TX */ -at91_set_a_periph (AT91_PIO_PORTA ,13 ,1 );/* CAN_RX */ - -/* Enable clock */ -writel (1 <<AT91CAP9_ID_CAN , &pmc->pcer); -} -#endif arch/arm/include/asm/arch-at91/at91_pmc.h +3
-6@@ -157,10 +157,8 @@ typedef struct at91_pmc {#define AT91_PMC_PCK (1 << 0)/* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1)/* USB Devcice Port Clock [AT91RM9200 only] */ #define AT91RM9200_PMC_MCKUDP (1 << 2)/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91CAP9_PMC_DDR (1 << 2)/* DDR Clock [AT91CAP9 revC only] */ #define AT91RM9200_PMC_UHP (1 << 4)/* USB Host Port Clock [AT91RM9200 only] */ #define AT91SAM926x_PMC_UHP (1 << 6)/* USB Host Port Clock [AT91SAM926x only] */ -#define AT91CAP9_PMC_UHP (1 << 6)/* USB Host Port Clock [AT91CAP9 only] */ #define AT91SAM926x_PMC_UDP (1 << 7)/* USB Devcice Port Clock [AT91SAM926x only] */ #define AT91_PMC_PCK0 (1 << 8)/* Programmable Clock 0 */ #define AT91_PMC_PCK1 (1 << 9)/* Programmable Clock 1 */ @@ -175,7 +173,7 @@ typedef struct at91_pmc {#define AT91_PMC_BIASCOUNT (0xf << 28)/* UTMI PLL Start-up Time */ #define AT91_PMC_MOSCEN (1 << 0)/* Main Oscillator Enable */ -#define AT91_PMC_OSCBYPASS (1 << 1)/* Oscillator Bypass [SAM9x, CAP9] */ +#define AT91_PMC_OSCBYPASS (1 << 1)/* Oscillator Bypass [SAM9x] */ #define AT91_PMC_OSCOUNT (0xff << 8)/* Main Oscillator Start-up Time */ #define AT91_PMC_MAINF (0xffff << 0)/* Main Clock Frequency */ @@ -210,7 +208,7 @@ typedef struct at91_pmc {#define AT91RM9200_PMC_MDIV_2 (1 << 8)#define AT91RM9200_PMC_MDIV_3 (2 << 8)#define AT91RM9200_PMC_MDIV_4 (3 << 8) -#define AT91SAM9_PMC_MDIV_1 (0 << 8)/* [SAM9,CAP9 only] */ +#define AT91SAM9_PMC_MDIV_1 (0 << 8)/* [SAM9 only] */ #define AT91SAM9_PMC_MDIV_2 (1 << 8)#define AT91SAM9_PMC_MDIV_4 (2 << 8)#define AT91SAM9_PMC_MDIV_3 (3 << 8)/* [some SAM9 only] */ @@ -230,8 +228,7 @@ typedef struct at91_pmc {#define AT91_PMC_LOCKA (1 << 1)/* PLLA Lock */ #define AT91_PMC_LOCKB (1 << 2)/* PLLB Lock */ #define AT91_PMC_MCKRDY (1 << 3)/* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6)/* UPLL Lock [AT91CAP9 only] */ -#define AT91_PMC_OSCSEL (1 << 7)/* Slow Clock Oscillator [AT91CAP9 revC only] */ +#define AT91_PMC_LOCKU (1 << 6)/* UPLL Lock */ #define AT91_PMC_PCK0RDY (1 << 8)/* Programmable Clock 0 */ #define AT91_PMC_PCK1RDY (1 << 9)/* Programmable Clock 1 */ #define AT91_PMC_PCK2RDY (1 << 10)/* Programmable Clock 2 */ arch/arm/include/asm/arch-at91/at91cap9.h deleted +0
-78@@ -1,78 +0,0 @@ -/* -* [origin: Linux kernel include/asm-arm/arch-at91/at91cap9.h] -* -* Copyright (C) 2007 Stelian Pop <[email protected]> -* Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> -* Copyright (C) 2007 Atmel Corporation. -* -* Common definitions. -* Based on AT91CAP9 datasheet revision B (Preliminary). -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef AT91CAP9_H -#define AT91CAP9_H - -/* -* Peripheral identifiers/interrupts. -*/ -#define AT91_ID_FIQ 0/* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1/* System Peripherals */ -#define AT91CAP9_ID_PIOABCD 2/* Parallel IO Controller A, B, C and D */ -#define AT91CAP9_ID_MPB0 3/* MP Block Peripheral 0 */ -#define AT91CAP9_ID_MPB1 4/* MP Block Peripheral 1 */ -#define AT91CAP9_ID_MPB2 5/* MP Block Peripheral 2 */ -#define AT91CAP9_ID_MPB3 6/* MP Block Peripheral 3 */ -#define AT91CAP9_ID_MPB4 7/* MP Block Peripheral 4 */ -#define AT91CAP9_ID_US0 8/* USART 0 */ -#define AT91CAP9_ID_US1 9/* USART 1 */ -#define AT91CAP9_ID_US2 10/* USART 2 */ -#define AT91CAP9_ID_MCI0 11/* Multimedia Card Interface 0 */ -#define AT91CAP9_ID_MCI1 12/* Multimedia Card Interface 1 */ -#define AT91CAP9_ID_CAN 13/* CAN */ -#define AT91CAP9_ID_TWI 14/* Two-Wire Interface */ -#define AT91CAP9_ID_SPI0 15/* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SPI1 16/* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SSC0 17/* Serial Synchronous Controller 0 */ -#define AT91CAP9_ID_SSC1 18/* Serial Synchronous Controller 1 */ -#define AT91CAP9_ID_AC97C 19/* AC97 Controller */ -#define AT91CAP9_ID_TCB 20/* Timer Counter 0, 1 and 2 */ -#define AT91CAP9_ID_PWMC 21/* Pulse Width Modulation Controller */ -#define AT91CAP9_ID_EMAC 22/* Ethernet */ -#define AT91CAP9_ID_AESTDES 23/* Advanced Encryption Standard, Triple DES */ -#define AT91CAP9_ID_ADC 24/* Analog-to-Digital Converter */ -#define AT91CAP9_ID_ISI 25/* Image Sensor Interface */ -#define AT91CAP9_ID_LCDC 26/* LCD Controller */ -#define AT91CAP9_ID_DMA 27/* DMA Controller */ -#define AT91CAP9_ID_UDPHS 28/* USB High Speed Device Port */ -#define AT91CAP9_ID_UHP 29/* USB Host Port */ -#define AT91CAP9_ID_IRQ0 30/* Advanced Interrupt Controller (IRQ0) */ -#define AT91CAP9_ID_IRQ1 31/* Advanced Interrupt Controller (IRQ1) */ - -#define AT91_PIO_BASE 0xfffff200 -#define AT91_PMC_BASE 0xfffffc00 -#define AT91_RSTC_BASE 0xfffffd00 -#define AT91_PIT_BASE 0xfffffd30 - -/* -* Internal Memory. -*/ -#define AT91CAP9_SRAM_BASE 0x00100000/* Internal SRAM base address */ -#define AT91CAP9_SRAM_SIZE (32 * SZ_1K)/* Internal SRAM size (32Kb) */ - -#define AT91CAP9_ROM_BASE 0x00400000/* Internal ROM base address */ -#define AT91CAP9_ROM_SIZE (32 * SZ_1K)/* Internal ROM size (32Kb) */ - -#define AT91CAP9_LCDC_BASE 0x00500000/* LCD Controller */ -#define AT91CAP9_UDPHS_BASE 0x00600000/* USB High Speed Device Port */ -#define AT91CAP9_UHP_BASE 0x00700000/* USB Host controller */ - -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - -/* -* Cpu Name -*/ -#define CONFIG_SYS_AT91_CPU_NAME "AT91CAP9" - -#endif arch/arm/include/asm/arch-at91/at91cap9_matrix.h deleted +0
-129@@ -1,129 +0,0 @@ -/* -* [origin: Linux kernel include/asm-arm/arch-at91/at91cap9_matrix.h] -* -* Copyright (C) 2007 Stelian Pop <[email protected]> -* Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> -* Copyright (C) 2006 Atmel Corporation. -* -* Memory Controllers (MATRIX, EBI) - System peripherals registers. -* Based on AT91CAP9 datasheet revision B (Preliminary). -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef AT91CAP9_MATRIX_H -#define AT91CAP9_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00)/* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04)/* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08)/* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C)/* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10)/* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14)/* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18)/* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C)/* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20)/* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24)/* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28)/* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C)/* Master Configuration Register 11 */ -#define AT91_MATRIX_ULBT (7 << 0)/* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40)/* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44)/* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48)/* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C)/* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50)/* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54)/* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58)/* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C)/* Slave Configuration Register 7 */ -#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60)/* Slave Configuration Register 8 */ -#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64)/* Slave Configuration Register 9 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0)/* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16)/* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18)/* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24)/* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80)/* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84)/* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88)/* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C)/* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90)/* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94)/* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98)/* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C)/* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0)/* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4)/* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8)/* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC)/* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0)/* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4)/* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8)/* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC)/* Priority Register B for Slave 7 */ -#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0)/* Priority Register A for Slave 8 */ -#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4)/* Priority Register B for Slave 8 */ -#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8)/* Priority Register A for Slave 9 */ -#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC)/* Priority Register B for Slave 9 */ -#define AT91_MATRIX_M0PR (3 << 0)/* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4)/* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8)/* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12)/* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16)/* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20)/* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24)/* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28)/* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0)/* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_M9PR (3 << 4)/* Master 9 Priority (in Register B) */ -#define AT91_MATRIX_M10PR (3 << 8)/* Master 10 Priority (in Register B) */ -#define AT91_MATRIX_M11PR (3 << 12)/* Master 11 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100)/* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0)/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1)/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_RCB9 (1 << 9) -#define AT91_MATRIX_RCB10 (1 << 10) -#define AT91_MATRIX_RCB11 (1 << 11) - -#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114)/* MPBlock Slave 0 Special Function Register */ -#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C)/* MPBlock Slave 1 Special Function Register */ - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120)/* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1)/* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3)/* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI_CS4A (1 << 4)/* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_EBI_CS5A (1 << 5)/* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_EBI_DBPUC (1 << 8)/* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DQSPDC (1 << 9)/* Data Qualifier Strobe Pull-Down Configuration */ -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16)/* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) - -#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C)/* MPBlock Slave 2 Special Function Register */ -#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130)/* MPBlock Slave 3 Special Function Register */ -#define AT91_APB_SFR (AT91_MATRIX + 0x134)/* APB Bridge Special Function Register */ - -#endif arch/arm/include/asm/arch-at91/at91sam9_matrix.h +0
-2@@ -15,8 +15,6 @@#include <asm/arch/at91sam9263_matrix.h> #elif defined(CONFIG_AT91SAM9RL )#include <asm/arch/at91sam9rl_matrix.h> -#elif defined(CONFIG_AT91CAP9 ) -#include <asm/arch/at91cap9_matrix.h> #elif defined(CONFIG_AT91SAM9G45 ) || defined(CONFIG_AT91SAM9M10G45 )#include <asm/arch/at91sam9g45_matrix.h> #elif defined(CONFIG_AT91SAM9N12 ) || defined(CONFIG_AT91SAM9X5 )arch/arm/include/asm/arch-at91/hardware.h +0
-2@@ -23,8 +23,6 @@# include <asm/arch/at91sam9g45.h> #elif defined(CONFIG_AT91SAM9N12 ) || defined(CONFIG_AT91SAM9X5 )# include <asm/arch/at91sam9x5.h> -#elif defined(CONFIG_AT91CAP9 ) -# include <asm/arch/at91cap9.h> #elif defined(CONFIG_SAMA5D3 )# include <asm/arch/sama5d3.h> #elif defined(CONFIG_SAMA5D4 )drivers/video/atmel_lcdfb.c +1
-1@@ -20,7 +20,7 @@#define ATMEL_LCDC_GUARD_TIME 1#endif -#if defined(CONFIG_AT91SAM9263 ) || defined(CONFIG_AT91CAP9 ) +#if defined(CONFIG_AT91SAM9263 )#define ATMEL_LCDC_FIFO_SIZE 2048#else #define ATMEL_LCDC_FIFO_SIZE 512
Dear Bo Shen,
Quoted 19 lines · Bo Shen
As the at91cap9adk board is removed by commit:
b5508344(ARM: remove broken "at91cap9adk" board), so the at91cap9 code is not used anymore, and also the document for at91cap9 can not be found on www.atmel.com, so remove the at91cap9 related code.Signed-off-by Bo Shen <[email protected]>Acked-by Andreas Bie?mann <[email protected]>---
arch/arm/cpu/arm926ejs/at91/Makefile | 1 - arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c | 189 ----------------------- arch/arm/include/asm/arch-at91/at91_pmc.h | 9 +- arch/arm/include/asm/arch-at91/at91cap9.h | 78 ---------- arch/arm/include/asm/arch-at91/at91cap9_matrix.h | 129 ---------------- arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 - arch/arm/include/asm/arch-at91/hardware.h | 2 - drivers/video/atmel_lcdfb.c | 2 +- 8 files changed, 4 insertions(+), 408 deletions(-)
Quoted 3 lines
delete mode 100644
arch/arm/cpu/arm926ejs/at91/at91cap9_devices.cdelete mode 100644arch/arm/include/asm/arch-at91/at91cap9.hdelete mode 100644arch/arm/include/asm/arch-at91/at91cap9_matrix.h
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bie?mann