Input: atmel_mxt_ts - status of the for-dtor branch and sscanf issue
Subsystems (3)
Hi Nick,
we have two questions regarding the atmel_mxt_ts driver:
First, what's the status of your github 'for-dtor' branch [1]? Is this subject to change? Or how stable is it? Will it go into mainline, soon?
We've tested the patches in that branch on top of the mainline ~v3.18 atmel_mxt_ts patches and they improve the driver a lot. So we'd like to pick that patches into our internal development tree.
Second, with that branch, doing a config file download, we sometimes randomly get
atmel_mxt_ts 2-004a: Bad format: failed to parse object atmel_mxt_ts 2-004a: Error -22 updating config
at the end of the parsing, depending on the byte following the firmware/config file in memory. Our config file does have CR/LF endings. The sscanf() returns "1" in that case.
A quick hack solution to that is skipping the last two bytes [2]. What do you think?
Best regards
Dirk
[1] https://github.com/ndyer/linux/commits/for-dtor
[2]
@@ -1586,7 +1586,7 @@ static int mxt_prepare_cfg_mem(struct mxt_data *data,
u16 reg;
u8 val;- while (data_pos < cfg->size) {
+ while ((data_pos + 2) < cfg->size) {
/* Read type, instance, length */
ret = sscanf(cfg->data + data_pos, "%x %x %x%n",
&type, &instance, &size, &offset);Quoted 8 lines · Dirk Behme
we have two questions regarding the
atmel_mxt_tsdriver:First, what's the status of your github 'for-dtor' branch [1]? Is this subject to change? Or how stable is it? Will it go into mainline, soon?
We've tested the patches in that branch on top of the mainline ~v3.18
atmel_mxt_tspatches and they improve the driver a lot. So we'd like to pick that patches into our internal development tree.
for-dtor is a set of patches that I have waiting to go upstream. I'm trying to feed them into mainline, but it's a slow process unfortunately. Any feedback/review of these patches is greatly appreciated.
It does get rebased frequently, for instance to re-order the patches or to take account of upstream review, so I would suggest not pulling it into your tree. I do however keep some backported branches (maxtouch-v3.x) at
https://github.com/atmel-maxtouch/linux/ against various kernel versions which aren't ever rebased, which you should be able to pull from.
Quoted 6 lines
Second, with that branch, doing a config file download, we sometimes randomly get
atmel_mxt_ts2-004a: Bad format: failed to parse objectatmel_mxt_ts2-004a: Error -22 updating config
Quoted 6 lines
at the end of the parsing, depending on the byte following the
firmware/configfile in memory. Our config file does have CR/LF endings. Thesscanf()returns "1" in that case.A quick hack solution to that is skipping the last two bytes [2]. What do you think?
I'm not convinced it's the right solution. I suspect the root cause is that the FW loader doesn't null-terminate the buffer we are handed from user-space, so sscanf runs on past the end sometimes. So I think we need to do something like this (from the chromiumos fork of this driver):
Quoted 33 lines · Nick Dyer
Quoted 8 lines · Dirk Behme
we have two questions regarding the
atmel_mxt_tsdriver:First, what's the status of your github 'for-dtor' branch [1]? Is this subject to change? Or how stable is it? Will it go into mainline, soon?
We've tested the patches in that branch on top of the mainline ~v3.18
atmel_mxt_tspatches and they improve the driver a lot. So we'd like to pick that patches into our internal development tree.for-dtor is a set of patches that I have waiting to go upstream. I'm trying to feed them into mainline, but it's a slow process unfortunately. Any feedback/review of these patches is greatly appreciated.
It does get rebased frequently, for instance to re-order the patches or to take account of upstream review, so I would suggest not pulling it into your tree. I do however keep some backported branches (maxtouch-v3.x) at
https://github.com/atmel-maxtouch/linux/ against various kernel versions which aren't ever rebased, which you should be able to pull from.Quoted 6 lines
Second, with that branch, doing a config file download, we sometimes randomly get
atmel_mxt_ts2-004a: Bad format: failed to parse objectatmel_mxt_ts2-004a: Error -22 updating configQuoted 6 lines
at the end of the parsing, depending on the byte following the
firmware/configfile in memory. Our config file does have CR/LF endings. Thesscanf()returns "1" in that case.A quick hack solution to that is skipping the last two bytes [2]. What do you think?
Quoted 6 lines
I'm not convinced it's the right solution. I suspect the root cause is that the FW loader doesn't null-terminate the buffer we are handed from user-space, so sscanf runs on past the end sometimes. So I think we need to do something like this (from the chromiumos fork of this driver):
What's about anything like [1], then? Inspired by above chromiumos fork.
Best regards
Dirk
[1]
From: Dirk Behme <[email protected]>
Date: Wed, 4 Feb 2015 10:26:16 +0100
Subject: [PATCH] Input: atmel_mxt_ts - terminate the config file with '\0'
The config data is loaded by the firmware interface into the kernel's memory space. This is done without trailing '\0'. I.e. while parsing the data, the end of the configuration data is just detected by comparing the actual data position with the overall size of the config data.
In case the configuration data ends with '\r' or with '\r\n', the config data parsing by sscanf() still reads data, even though the end of the file is already reached. This is done over the end of the config data, i.e. random kernel data might be read, until sscanf() detects a (random) end in that memory.
Prevent this by adding a trailing '\0' to the configuration data. This stops sscanf() by reading over the end of the file in memory.
--- drivers/input/touchscreen/atmel_mxt_ts.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-)
drivers/input/touchscreen/atmel_mxt_ts.c +24 -3
@@ -239,6 +239,11 @@ struct mxt_object {u8 num_report_ids; } __packed; +struct mxt_config { +size_t size; +u8 *data; +}; +/* Each client has this additional data */ struct mxt_data {struct i2c_client *client;
@@ -1571,7 +1576,7 @@ static int mxt_check_retrigen(struct mxt_data *data) } static int mxt_prepare_cfg_mem(struct mxt_data *data, - const struct firmware *cfg, + const struct mxt_config *cfg, unsigned int data_pos, unsigned int cfg_start_ofs, u8 *config_mem,
@@ -1722,7 +1727,7 @@ static int mxt_init_t7_power_cfg(struct mxt_data *data);* <SIZE> - 2-byte object size as hex * <CONTENTS> - array of <SIZE> 1-byte hex values */ -static int mxt_update_cfg (struct mxt_data *data,const struct firmware *cfg) +static int mxt_update_cfg (struct mxt_data *data,const struct mxt_config *cfg) {struct device *dev = &data->client->dev;struct mxt_info cfg_info;
@@ -2709,6 +2714,7 @@ static int mxt_configure_objects(struct mxt_data *data, const struct firmware *cfg) {struct device *dev = &data->client->dev; +struct mxt_config config;int error; error =mxt_init_t7_power_cfg (data);
@@ -2718,11 +2724,26 @@ static int mxt_configure_objects(struct mxt_data *data, }if (cfg) { - error =mxt_update_cfg (data, cfg); +/* Make a mutable, '\0'-terminated copy of the config file */ + config.data =kmalloc (cfg->size +1 ,GFP_KERNEL ); +if (!config.data) { + error = -ENOMEM ; +dev_err (dev,"Error %d allocating config memory\n" , + error); + goto err_alloc_cfg; + } +memcpy (config.data, cfg->data, cfg->size); + config.data[cfg->size] ='\0' ; + config.size = cfg->size; + + error =mxt_update_cfg (data, &config);if (error)dev_warn (dev,"Error %d updating config\n" , error); + +kfree (config.data); } +err_alloc_cfg:if (data->T9_reportid_min) { error =mxt_initialize_t9_input_device (data);if (error)
Signature · 1 line
1.8.2
Hi Nick,
Quoted 44 lines · Dirk Behme
Quoted 43 lines · Nick Dyer
Quoted 8 lines · Dirk Behme
we have two questions regarding the
atmel_mxt_tsdriver:First, what's the status of your github 'for-dtor' branch [1]? Is this subject to change? Or how stable is it? Will it go into mainline, soon?
We've tested the patches in that branch on top of the mainline ~v3.18
atmel_mxt_tspatches and they improve the driver a lot. So we'd like to pick that patches into our internal development tree.for-dtor is a set of patches that I have waiting to go upstream. I'm trying
to feed them into mainline, but it's a slow process unfortunately. Any feedback/review of these patches is greatly appreciated.It does get rebased frequently, for instance to re-order the patches or to
take account of upstream review, so I would suggest not pulling it into your tree. I do however keep some backported branches (maxtouch-v3.x) at
https://github.com/atmel-maxtouch/linux/ against various kernel versions which aren't ever rebased, which you should be able to pull from.Quoted 6 lines
Second, with that branch, doing a config file download, we sometimes randomly get
atmel_mxt_ts2-004a: Bad format: failed to parse objectatmel_mxt_ts2-004a: Error -22 updating configQuoted 7 lines
at the end of the parsing, depending on the byte following the
firmware/configfile in memory. Our config file does have CR/LF endings. Thesscanf()returns "1" in that case.A quick hack solution to that is skipping the last two bytes [2]. What do
you think?I'm not convinced it's the right solution. I suspect the root cause is that
the FW loader doesn't null-terminate the buffer we are handed from user-space, so sscanf runs on past the end sometimes. So I think we need to
do something like this (from the chromiumos fork of this driver):
Quoted 5 lines
Quoted 2 lines
What's about anything like [1], then? Inspired by above chromiumos fork.
Any opinions on the below?
Many thanks
Dirk
Quoted 101 lines
[1]
From: Dirk Behme <[email protected]>
Date: Wed, 4 Feb 2015 10:26:16 +0100
Subject: [PATCH] Input:atmel_mxt_ts- terminate the config file with '\0'The config data is loaded by the firmware interface into the kernel's memory space. This is done without trailing '\0'. I.e. while parsing the data, the end of the configuration data is just detected by comparing the actual data position with the overall size of the config data.
In case the configuration data ends with '\r' or with '\r\n', the config data parsing by
sscanf()still reads data, even though the end of the file is already reached. This is done over the end of the config data, i.e. random kernel data might be read, untilsscanf()detects a (random) end in that memory.Prevent this by adding a trailing '\0' to the configuration data. This stops
sscanf()by reading over the end of the file in memory.Signed-off-by Dirk Behme <[email protected]>--- drivers/input/touchscreen/atmel_mxt_ts.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-)drivers/input/touchscreen/atmel_mxt_ts.c +7
-2@@ -239,6 +239,11 @@ struct mxt_object {u8 num_report_ids; } __packed; +struct mxt_config { +size_t size; +u8 *data; +}; +/* Each client has this additional data */ struct mxt_data {struct i2c_client *client;@@ -1571,7 +1576,7 @@ static int mxt_check_retrigen(struct mxt_data *data) } static int mxt_prepare_cfg_mem(struct mxt_data *data, - const struct firmware *cfg, + const struct mxt_config *cfg, unsigned int data_pos, unsigned int cfg_start_ofs, u8 *config_mem,@@ -1722,7 +1727,7 @@ static int mxt_init_t7_power_cfg(struct mxt_data*data); * <SIZE> - 2-byte object size as hex * <CONTENTS> - array of <SIZE> 1-byte hex values */ -static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg) +static int mxt_update_cfg (struct mxt_data *data,const struct mxt_config *cfg){ struct device *dev = &data->client->dev; struct mxt_info cfg_info;drivers/input/touchscreen/atmel_mxt_ts.c +1
-0@@ -2709,6 +2714,7 @@ static int mxt_configure_objects(struct mxt_data *data, const struct firmware *cfg) {struct device *dev = &data->client->dev; +struct mxt_config config;int error;error = mxt_init_t7_power_cfg(data);drivers/input/touchscreen/atmel_mxt_ts.c +16
-1@@ -2718,11 +2724,26 @@ static int mxt_configure_objects(struct mxt_data *data, }if (cfg) { - error =mxt_update_cfg (data, cfg); +/* Make a mutable, '\0'-terminated copy of the config file */ + config.data =kmalloc (cfg->size +1 ,GFP_KERNEL ); +if (!config.data) { + error = -ENOMEM ; +dev_err (dev,"Error %d allocating config memory\n" , + error); + goto err_alloc_cfg; + } +memcpy (config.data, cfg->data, cfg->size); + config.data[cfg->size] ='\0' ; + config.size = cfg->size; + + error =mxt_update_cfg (data, &config);if (error)dev_warn (dev,"Error %d updating config\n" , error); + +kfree (config.data); } +err_alloc_cfg:if (data->T9_reportid_min) { error =mxt_initialize_t9_input_device (data);if (error)