package/gnu-efi: bump version to 3.0.1

PATCH New Romain Naour 3 participants 12 messages Jan 19, 2015 – Jan 28, 2015

lore

Share & tools

lore

Romain Naour

author

2015-01-19 23:29 UTC #0 lore raw

PATCH 1/4 package/gnu-efi: bump version to 3.0.1

remove upstream patch gnu-efi-03-parallel-make.patch

Signed-off-by Romain Naour <[email protected]>

---
 ...S-CPPFLAGS-to-be-completed-from-the-envir.patch | 80 ++++++++++++++++++++++
 ...02-Fix-parallel-make-failure-for-archives.patch | 57 +++++++++++++++
 .../gnu-efi/gnu-efi-01-use-override-cflags.patch   | 53 --------------
 .../gnu-efi-02-parallel-make-archives.patch        | 48 -------------
 package/gnu-efi/gnu-efi-03-parallel-make.patch     | 22 ------
 package/gnu-efi/gnu-efi.hash                       |  5 +-
 package/gnu-efi/gnu-efi.mk                         |  4 +-
 7 files changed, 142 insertions(+), 127 deletions(-)
 create mode 100644 package/gnu-efi/0001-Allow-CFLAGS-CPPFLAGS-to-be-completed-from-the-envir.patch
 create mode 100644 package/gnu-efi/0002-Fix-parallel-make-failure-for-archives.patch
 delete mode 100644 package/gnu-efi/gnu-efi-01-use-override-cflags.patch
 delete mode 100644 package/gnu-efi/gnu-efi-02-parallel-make-archives.patch
 delete mode 100644 package/gnu-efi/gnu-efi-03-parallel-make.patch

package/gnu-efi/0001-Allow-CFLAGS-CPPFLAGS-to-be-completed-from-the-envir.patch new file +80 -0

new file mode 100644
index 0000000..eee0a9a
@@ -0,0 +1,80 @@
+From eea0f62a1f6712f10afe47635b80a061505d2d2f Mon Sep 17 00:00:00 2001
+From: Romain Naour <[email protected]>
+Date: Sat, 17 Jan 2015 18:33:37 +0100
+Subject: [PATCH 1/2] Allow CFLAGS/CPPFLAGS to be completed from the
+ environment
+
+Buildroot passes its own CPPFLAGS and CFLAGS in the environment, so
+the CFLAGS += and CPPFLAGS += statements in gnu-efi Makefile have no
+effect. Change these to override <VARIABLE> += so that they extend the
+flags passed by Buildroot.
+
+[Romain:
+ - rebase on top of 3.0.1 release]
+
+Signed-off-by: Thomas Petazzoni <[email protected]>
+Signed-off-by: Romain Naour <[email protected]>
+---
+ Make.defaults | 16 ++++++++--------
+ 1 file changed, 8 insertions(+), 8 deletions(-)
+
+diff --git a/Make.defaults b/Make.defaults
+index 169273d..b0ddea0 100644
+--- a/Make.defaults
++++ b/Make.defaults
+@@ -80,14 +80,14 @@ endif
+ #
+ 
+ # Arch-specific compilation flags
+-CPPFLAGS += -DCONFIG_$(ARCH)
++override CPPFLAGS += -DCONFIG_$(ARCH)
+ 
+ ifeq ($(ARCH),ia64)
+-  CFLAGS += -mfixed-range=f32-f127
++  override CFLAGS += -mfixed-range=f32-f127
+ endif
+ 
+ ifeq ($(ARCH),ia32)
+-  CFLAGS += -mno-mmx -mno-sse
++  override CFLAGS += -mno-mmx -mno-sse
+   ifeq ($(HOSTARCH),x86_64)
+     ARCH3264 = -m32
+   endif
+@@ -103,10 +103,10 @@ ifeq ($(ARCH),x86_64)
+                                  && [ $(GCCMINOR) -ge "7" ] ) ) \
+                           && echo 1)
+   ifeq ($(GCCNEWENOUGH),1)
+-    CPPFLAGS += -DGNU_EFI_USE_MS_ABI -maccumulate-outgoing-args --std=c11
++    override CPPFLAGS += -DGNU_EFI_USE_MS_ABI -maccumulate-outgoing-args --std=c11
+   endif
+ 
+-  CFLAGS += -mno-red-zone -mno-mmx -mno-sse
++  override CFLAGS += -mno-red-zone -mno-mmx -mno-sse
+   ifeq ($(HOSTARCH),ia32)
+     ARCH3264 = -m64
+   endif
+@@ -127,7 +127,7 @@ export LIBGCC=$(shell $(CC) $(ARCH3264) -print-libgcc-file-name)
+ endif
+ 
+ ifeq ($(ARCH),arm)
+-CFLAGS += -marm
++override CFLAGS += -marm
+ endif
+ 
+ # Generic compilation flags
+@@ -135,10 +135,10 @@ INCDIR  += -I$(SRCDIR) -I$(TOPDIR)/inc -I$(TOPDIR)/inc/$(ARCH) \
+            -I$(TOPDIR)/inc/protocol
+ 
+ ifeq (FreeBSD, $(findstring FreeBSD, $(OS)))
+-CFLAGS  += $(ARCH3264) -O2 -fpic -Wall -fshort-wchar -fno-strict-aliasing \
++override CFLAGS  += $(ARCH3264) -O2 -fpic -Wall -fshort-wchar -fno-strict-aliasing \
+            -ffreestanding -fno-stack-protector
+ else
+-CFLAGS  += $(ARCH3264) -O2 -fpic -Wall -fshort-wchar -fno-strict-aliasing \
++override CFLAGS  += $(ARCH3264) -O2 -fpic -Wall -fshort-wchar -fno-strict-aliasing \
+            -fno-merge-constants -ffreestanding -fno-stack-protector       \
+            -fno-stack-check
+ endif
+-- 
+1.9.3
+

package/gnu-efi/0002-Fix-parallel-make-failure-for-archives.patch new file +57 -0

57 lines not on this page · raw message

package/gnu-efi/gnu-efi-01-use-override-cflags.patch deleted +0 ~~-53~~

53 lines not on this page · raw message

package/gnu-efi/gnu-efi-02-parallel-make-archives.patch deleted +0 ~~-48~~

48 lines not on this page · raw message

package/gnu-efi/gnu-efi-03-parallel-make.patch deleted +0 ~~-22~~

deleted file mode 100644
index 27c94e8..0000000
@@ -1,22 +0,0 @@
-Fix parallel make failure
-
-Upstream-Status: Submitted [Maintainer directly]
-
-Add a missing dependency which resulted in a race leading to failure
-on larger values of -j.
-
-Signed-off-by: Darren Hart <[email protected]>
-
-Index: gnu-efi-3.0/Makefile
-===================================================================
---- gnu-efi-3.0.orig/Makefile
-+++ gnu-efi-3.0/Makefile
-@@ -42,6 +42,8 @@ include $(SRCDIR)/Make.defaults
- 
- SUBDIRS = lib gnuefi inc apps
- 
-+gnuefi: lib
-+
- all:	check_gcc $(SUBDIRS)
- 
- $(SUBDIRS):

package/gnu-efi/gnu-efi.hash +3 -2

index ec14922..21033bd 100644
@@ -1,2 +1,3 @@
-# Locally computed:
-sha256  3c0d450d5829204ca05dcb3b2aae772e52c379b7c7e09146759c6315606f934e  gnu-efi_3.0u.orig.tar.gz
+# From http://sourceforge.net/projects/gnu-efi/files
+md5 c4099c443b6b0c2b04dedc33e7814ec0 gnu-efi-3.0.1.tar.bz2
+sha1 07eea4d72f7ecb7229aaa77ddd411de5673c67b6 gnu-efi-3.0.1.tar.bz2

package/gnu-efi/gnu-efi.mk +2 -2

index 9fbbadd..0e067a6 100644
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-GNU_EFI_VERSION = 3.0u
-GNU_EFI_SOURCE = gnu-efi_$(GNU_EFI_VERSION).orig.tar.gz
+GNU_EFI_VERSION = 3.0.1
+GNU_EFI_SOURCE = gnu-efi-$(GNU_EFI_VERSION).tar.bz2
 GNU_EFI_SITE = http://downloads.sourceforge.net/project/gnu-efi
 GNU_EFI_INSTALL_STAGING = YES
 GNU_EFI_LICENSE = GPLv2+ (gnuefi), BSD (efilib)

Signature · 1 line

1.9.3

Romain Naour

author

2015-01-19 23:29 UTC #1 lore raw

PATCH 2/4 boot/syslinux: bump version to 6.03

Remove gnu-efi dependency since it's directly included in syslinux sources since 6.03 release. Also remove the patch for find-gnu-efi.sh script which was removed.

There are still some parallel build issues, so MAKE1 can't be removed for now.

Also add a hash file.

Signed-off-by Romain Naour <[email protected]>

---
 .../syslinux-000-user-headers-from-sysroot.patch   | 37 ----------------------
 boot/syslinux/syslinux.hash                        |  2 ++
 boot/syslinux/syslinux.mk                          |  4 +--
 3 files changed, 4 insertions(+), 39 deletions(-)
 delete mode 100644 boot/syslinux/syslinux-000-user-headers-from-sysroot.patch
 create mode 100644 boot/syslinux/syslinux.hash

boot/syslinux/syslinux-000-user-headers-from-sysroot.patch deleted +0 ~~-37~~

deleted file mode 100644
index 5edf79f..0000000
@@ -1,37 +0,0 @@
-efi: look for headers and libs in the sysroot
-
-Currently, syslinux hard-codes search paths to /usr/.... directories.
-This does not play well in cross-compilation.
-
-If $SYSROOT is defined, prepend it to the search paths.
-
-Signed-off-by: "Yann E. MORIN" <[email protected]>
-
-diff -durN syslinux-6.02.orig/efi/find-gnu-efi.sh syslinux-6.02/efi/find-gnu-efi.sh
---- syslinux-6.02.orig/efi/find-gnu-efi.sh	2013-10-13 19:59:03.000000000 +0200
-+++ syslinux-6.02/efi/find-gnu-efi.sh	2014-04-22 00:19:23.638483887 +0200
-@@ -9,7 +9,7 @@
- find_include()
- {
-     for d in $include_dirs; do
--	found=`find $d -name efi -type d 2> /dev/null`
-+	found=`find $SYSROOT$d -name efi -type d 2> /dev/null`
- 	if [ "$found"x != "x" ] && [ -e $found/$ARCH/efibind.h ]; then
- 	    echo $found
- 	    break;
-@@ -20,12 +20,12 @@
- find_lib()
- {
-     for d in $lib_dirs; do
--	found=`find $d -name libgnuefi.a 2> /dev/null`
-+	found=`find $SYSROOT$d -name libgnuefi.a 2> /dev/null`
- 	if [ "$found"x != "x" ]; then
- 	    crt_name='crt0-efi-'$ARCH'.o'
--	    crt=`find $d -name $crt_name 2> /dev/null`
-+	    crt=`find $SYSROOT$d -name $crt_name 2> /dev/null`
- 	    if [ "$crt"x != "x" ]; then
--		echo $d
-+		echo $SYSROOT$d
- 		break;
- 	    fi
- 	fi

boot/syslinux/syslinux.hash new file +2 -0

new file mode 100644
index 0000000..5afa6d6
@@ -0,0 +1,2 @@
+# From https://www.kernel.org/pub/linux/utils/boot/syslinux/sha256sums.asc
+sha256 26d3986d2bea109d5dc0e4f8c4822a459276cf021125e8c9f23c3cca5d8c850e syslinux-6.03.tar.xz

boot/syslinux/syslinux.mk +2 -2

index 8ef53f9..7ec840e 100644
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-SYSLINUX_VERSION = 6.02
+SYSLINUX_VERSION = 6.03
 SYSLINUX_SOURCE = syslinux-$(SYSLINUX_VERSION).tar.xz
 SYSLINUX_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/boot/syslinux

@@ -19,13 +19,13 @@ ifeq ($(BR2_TARGET_SYSLINUX_LEGACY_BIOS),y)
 SYSLINUX_TARGET = bios
 endif
 
+# gnu-efi is directly included in syslinux sources since 6.03 release.
 ifeq ($(BR2_TARGET_SYSLINUX_EFI),y)
 ifeq ($(BR2_ARCH_IS_64),y)
 SYSLINUX_EFI_BITS = efi64
 else
 SYSLINUX_EFI_BITS = efi32
 endif # 64-bit
-SYSLINUX_DEPENDENCIES += gnu-efi
 SYSLINUX_TARGET = $(SYSLINUX_EFI_BITS)
 endif # EFI

Signature · 1 line

1.9.3

Thomas Petazzoni

2015-01-26 22:22 UTC #2 lore raw

PATCH 2/4 boot/syslinux: bump version to 6.03

Dear Romain Naour,

Quoted 3 lines · Romain Naour

Remove gnu-efi dependency since it's directly included in syslinux sources since 6.03 release. Also remove the patch for find-gnu-efi.sh script which was removed.

The script has been renamed to output/build/syslinux-6.03/efi/check-gnu-efi.sh. And its contents seems to hint that syslinux can use an external gnu-efi installation, which would be the preferred solution in Buildroot. Can you investigate this? Of course, if there is no upstream supported way of using an external gnu-efi installation, then leave things as is in your current patch.

Also, if the gnu-efi dependency really needs to be removed, you also need to remove the "select" in syslinux Config.in file.

Thanks!

Thomas

Signature · 3 lines

Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Romain Naour

author

2015-01-28 00:06 UTC #3 lore raw

PATCH 2/4 boot/syslinux: bump version to 6.03

Hi Thomas,

Le 26/01/2015 23:22, Thomas Petazzoni a ?crit :

Quoted 7 lines

Dear Romain Naour,
Quoted 3 lines · Romain Naour
Remove gnu-efi dependency since it's directly included in syslinux sources since 6.03 release. Also remove the patch for find-gnu-efi.sh script which was removed.

Quoted 6 lines

The script has been renamed to output/build/syslinux-6.03/efi/check-gnu-efi.sh. And its contents seems to hint that syslinux can use an external gnu-efi installation, which would be the preferred solution in Buildroot. Can you investigate this? Of course, if there is no upstream supported way of using an external gnu-efi installation, then leave things as is in your current patch.

I checked if an external gnu-efi can be used but it's hard coded in build-gnu-efi.sh.

The gnu-efi build start in mk/efi.mk line 51 by calling:
$(topdir)/efi/check-gnu-efi.sh $(EFI_SUBARCH) $(objdir)

Where:
topdir = output/build/syslinux-6.03
EFI_SUBARCH = ia32
objdir = output/build/syslinux-6.03/efi32 (build output directory)

The script check-gnu-efi.sh test if gnu-efi needs to be build. If yes, it call build-gnu-efi.sh

The path to gnu-efi is hard coded by EFIDIR:
EFIDIR="$(readlink -f "$objdir/../gnu-efi/gnu-efi-3.0")"

I tried to comment this line and define EFIDIR=$(GNU_EFI_DIR) in SYSLINUX_BUILD_CMDS.
But there are some build issues to be investigated.

But clearly, external gnu-efi is not supported anymore...

Quoted 2 lines

Also, if the gnu-efi dependency really needs to be removed, you also need to remove the "select" in syslinux Config.in file.

Indeed, I forgot to remove the "select", thanks.

Quoted 5 lines

Thanks!
Thomas

Thomas Petazzoni

2015-01-28 08:09 UTC #4 lore raw

PATCH 2/4 boot/syslinux: bump version to 6.03

Dear Romain Naour,

Quoted 14 lines · Romain Naour

I checked if an external gnu-efi can be used but it's hard coded in build-gnu-efi.sh.
The gnu-efi build start in mk/efi.mk line 51 by calling:
$(topdir)/efi/check-gnu-efi.sh $(EFI_SUBARCH) $(objdir)
Where:
topdir = output/build/syslinux-6.03
EFI_SUBARCH = ia32
objdir = output/build/syslinux-6.03/efi32 (build output directory)
The script check-gnu-efi.sh test if gnu-efi needs to be build. If yes, it call build-gnu-efi.sh

Quoted 8 lines

The path to gnu-efi is hard coded by EFIDIR:
EFIDIR="$(readlink -f "$objdir/../gnu-efi/gnu-efi-3.0")"
I tried to comment this line and define EFIDIR=$(GNU_EFI_DIR) in SYSLINUX_BUILD_CMDS.
But there are some build issues to be investigated.
But clearly, external gnu-efi is not supported anymore...

Ok, thanks for looking a bit closer!

Thomas

Signature · 3 lines

Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Romain Naour

author

2015-01-19 23:29 UTC #5 lore raw

PATCH 3/4 boot/syslinux: disable MinGW support

In reply to Romain Naour

If MinGW is found on the host, syslinux.exe and syslinux64.exe are build. Disable it since there are no MinGW support in Buildroot.

Signed-off-by Romain Naour <[email protected]>

---
 boot/syslinux/0001-disable-MinGW-support.patch | 29 ++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 boot/syslinux/0001-disable-MinGW-support.patch

boot/syslinux/0001-disable-MinGW-support.patch new file +29 -0

new file mode 100644
index 0000000..3711afd
@@ -0,0 +1,29 @@
+From 0455fc58e191687931fe2c0eb5ab4b1d9b970aa4 Mon Sep 17 00:00:00 2001
+From: Romain Naour <[email protected]>
+Date: Sat, 17 Jan 2015 19:16:50 +0100
+Subject: [PATCH 1/1] disable MinGW support
+
+Signed-off-by: Romain Naour <[email protected]>
+---
+ win32/find-mingw32.sh | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/win32/find-mingw32.sh b/win32/find-mingw32.sh
+index 51dcdd7..674f46a 100755
+--- a/win32/find-mingw32.sh
++++ b/win32/find-mingw32.sh
+@@ -2,6 +2,11 @@
+ 
+ cc="$1"
+ 
++# There is no mingw package in Buildroot.
++# Don't use mingw from the host
++echo missing-
++exit 1
++
+ for prefix in \
+     mingw- \
+     mingw32- \
+-- 
+1.9.3
+

Signature · 1 line

1.9.3

Thomas Petazzoni

2015-01-26 22:23 UTC #6 lore raw

PATCH 3/4 boot/syslinux: disable MinGW support

Dear Romain Naour,

Quoted 9 lines · Romain Naour

If MinGW is found on the host, syslinux.exe and syslinux64.exe are build. Disable it since there are no MinGW support in Buildroot.
Signed-off-by Romain Naour <[email protected]>
---
 boot/syslinux/0001-disable-MinGW-support.patch | 29 ++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 boot/syslinux/0001-disable-MinGW-support.patch

Hum, why not, but your patch is clearly not upstreamable in Syslinux as is. Do you think you can instead propose a patch that could potentially be upstreamed (and submit it upstream) ?

Thanks,

Thomas

Signature · 3 lines

Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Romain Naour

author

2015-01-19 23:29 UTC #7 lore raw

PATCH 4/4 boot/syslinux: add host-perl dependency

In reply to Romain Naour

Syslinux use a perl interpreter in it's build system, so add host-perl as dependency.

Signed-off-by Romain Naour <[email protected]>

---
 boot/syslinux/syslinux.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

boot/syslinux/syslinux.mk +1 -1

index 7ec840e..c8107f1 100644
@@ -13,7 +13,7 @@ SYSLINUX_LICENSE_FILES = COPYING
 
 SYSLINUX_INSTALL_IMAGES = YES
 
-SYSLINUX_DEPENDENCIES = host-nasm host-util-linux host-upx
+SYSLINUX_DEPENDENCIES = host-nasm host-perl host-util-linux host-upx
 
 ifeq ($(BR2_TARGET_SYSLINUX_LEGACY_BIOS),y)
 SYSLINUX_TARGET = bios

Signature · 1 line

1.9.3

Baruch Siach

2015-01-20 08:54 UTC #8 lore raw

PATCH 4/4 boot/syslinux: add host-perl dependency

Hi Romain,

Quoted 2 lines · Romain Naour

Syslinux use a perl interpreter in it's build system, so add host-perl as dependency.

Buildroot expects perl to be installed on the host system already. See ?2.1 (Mandatory packages) in the manual. AFAIK host-perl is only used to build perl itself for the target.

Have you encountered any specific build failure?

baruch

Signature · 3 lines

     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

Romain Naour

author

2015-01-20 20:27 UTC #9 lore raw

PATCH 4/4 boot/syslinux: add host-perl dependency

Hi Baruch,

Le 20/01/2015 09:54, Baruch Siach a ?crit :

Quoted 9 lines

Hi Romain,
Quoted 2 lines · Romain Naour
Syslinux use a perl interpreter in it's build system, so add host-perl as dependency.
Buildroot expects perl to be installed on the host system already. See ?2.1 (Mandatory packages) in the manual. AFAIK host-perl is only used to build perl itself for the target.

Thanks for the reminder, I haven't checked if perl was a mandatory packages before sending the patch...

Quoted 2 lines

Have you encountered any specific build failure?

Not at all.

Best regards,
Romain

Quoted 3 lines

baruch

Thomas Petazzoni

2015-01-26 22:24 UTC #10 lore raw

PATCH 4/4 boot/syslinux: add host-perl dependency

Dear Romain Naour,

Quoted 10 lines · Romain Naour

Quoted 3 lines
Buildroot expects perl to be installed on the host system already. See ?2.1 (Mandatory packages) in the manual. AFAIK host-perl is only used to build perl itself for the target.
Thanks for the reminder, I haven't checked if perl was a mandatory packages before sending the patch...
Quoted 1 line
Have you encountered any specific build failure?
Not at all.

So I'll mark the patch as Rejected in patchwork. Thanks Romain and Baruch.

Thomas

Signature · 3 lines

Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Thomas Petazzoni

Applied

2015-01-26 22:19 UTC #11 lore raw

PATCH 1/4 package/gnu-efi: bump version to 3.0.1

In reply to Romain Naour

Dear Romain Naour,

Quoted 17 lines · Romain Naour

remove upstream patch gnu-efi-03-parallel-make.patch

Signed-off-by Romain Naour <[email protected]>

---
 ...S-CPPFLAGS-to-be-completed-from-the-envir.patch | 80 ++++++++++++++++++++++
 ...02-Fix-parallel-make-failure-for-archives.patch | 57 +++++++++++++++
 .../gnu-efi/gnu-efi-01-use-override-cflags.patch   | 53 --------------
 .../gnu-efi-02-parallel-make-archives.patch        | 48 -------------
 package/gnu-efi/gnu-efi-03-parallel-make.patch     | 22 ------
 package/gnu-efi/gnu-efi.hash                       |  5 +-
 package/gnu-efi/gnu-efi.mk                         |  4 +-
 7 files changed, 142 insertions(+), 127 deletions(-)
 create mode 100644 package/gnu-efi/0001-Allow-CFLAGS-CPPFLAGS-to-be-completed-from-the-envir.patch
 create mode 100644 package/gnu-efi/0002-Fix-parallel-make-failure-for-archives.patch
 delete mode 100644 package/gnu-efi/gnu-efi-01-use-override-cflags.patch
 delete mode 100644 package/gnu-efi/gnu-efi-02-parallel-make-archives.patch
 delete mode 100644 package/gnu-efi/gnu-efi-03-parallel-make.patch

Applied, thanks!

Thomas

Signature · 3 lines

Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com