Skip to contentSkip to conversation

Introducing the Alpine platform.

PATCH Superseded Tsahee Zidenberg 2 participants 3 messages Feb 2, 2015

v3 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v3 cover Introducing the Alpine platform.

Annapurna Labs(TM) is a technology company providing innovative solutions including chips, software, and systems for the datacenter and enterprise infrastructure.

Alpine(TM) is one of Annapurna Labs? chip products targeting storage and networking applications. It is a complete Platform-On-Chip, integrating 2-4 cortex-A15 cores and multiple innovations to provide a seamless networking and storage fabric for enterprise and datacenter equipment.

This patchset provides initial support for the Alpine platform.

Patch #1 contains minimal, single-cpu architecture support.

Patch #2 adds early-debug capabilities via Alpine UART 0.

Patch #3 adds smp-support and a secondary cpu enable-method for the platform.

Patch #4 provides documentation for the available device-tree nodes.

Patch #5 provides a device-tree for Alpine soc and development board.

The patchset was tested with multi_v7_defconfig, adding CONFIG_ARCH_ALPINE

---
V2:
* map physical cpu-id from logical on cpu wakeup
* use syscon/regmap for sysfabric_service implementation
* devicetree format:

**  split between .dtsi and dts
**  dual license
**  node and manufacturer naming

* intoduce devicetree in two separate patches
* multiple format fixes
* rebased on d932006 (for-next)

---
V3:
* small format changes
* rebased on f9db7e2 (for-next)

Tsahee Zidenberg (5):
ARM: Alpine: Initial support for Alpine platform
ARM: Alpine: early-debug print support
ARM: Alpine: smp support
ARM: dts: Alpine platform binding documentation
ARM: dts: Alpine platform devicetree

 .../devicetree/bindings/arm/al,alpine.txt          |  88 +++++++++++++
 .../bindings/arm/cpu-enable-method/al,alpine-smp   |  52 ++++++++
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/Kconfig                                   |   2 +
 arch/arm/Kconfig.debug                             |  12 +-
 arch/arm/Makefile                                  |   1 +
 arch/arm/boot/dts/Makefile                         |   4 +
 arch/arm/boot/dts/alpine-db.dts                    |  35 +++++
 arch/arm/boot/dts/alpine.dtsi                      | 141 +++++++++++++++++++++
 arch/arm/mach-alpine/Kconfig                       |  10 ++
 arch/arm/mach-alpine/Makefile                      |   6 +
 arch/arm/mach-alpine/alpine_cpu_pm.c               |  70 ++++++++++
 arch/arm/mach-alpine/alpine_cpu_pm.h               |  26 ++++
 arch/arm/mach-alpine/alpine_cpu_resume.h           |  38 ++++++
 arch/arm/mach-alpine/alpine_machine.c              |  28 ++++
 arch/arm/mach-alpine/platsmp.c                     |  49 +++++++
 16 files changed, 562 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/al,alpine.txt
 create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
 create mode 100644 arch/arm/boot/dts/alpine-db.dts
 create mode 100644 arch/arm/boot/dts/alpine.dtsi
 create mode 100644 arch/arm/mach-alpine/Kconfig
 create mode 100644 arch/arm/mach-alpine/Makefile
 create mode 100644 arch/arm/mach-alpine/alpine_cpu_pm.c
 create mode 100644 arch/arm/mach-alpine/alpine_cpu_pm.h
 create mode 100644 arch/arm/mach-alpine/alpine_cpu_resume.h
 create mode 100644 arch/arm/mach-alpine/alpine_machine.c
 create mode 100644 arch/arm/mach-alpine/platsmp.c
Signature · 1 line
1.9.1
#1 lore raw

v3 cover Introducing the Alpine platform.

Hi Tsahee,

Quoted 65 lines · Tsahee Zidenberg

Annapurna Labs(TM) is a technology company providing innovative solutions including chips, software, and systems for the datacenter and enterprise infrastructure.

Alpine(TM) is one of Annapurna Labs? chip products targeting storage and networking applications. It is a complete Platform-On-Chip, integrating 2-4 cortex-A15 cores and multiple innovations to provide a seamless networking and storage fabric for enterprise and datacenter equipment.

This patchset provides initial support for the Alpine platform.

Patch #1 contains minimal, single-cpu architecture support.

Patch #2 adds early-debug capabilities via Alpine UART 0.

Patch #3 adds smp-support and a secondary cpu enable-method for the platform.

Patch #4 provides documentation for the available device-tree nodes.

Patch #5 provides a device-tree for Alpine soc and development board.

The patchset was tested with multi_v7_defconfig, adding CONFIG_ARCH_ALPINE

---
V2:
* map physical cpu-id from logical on cpu wakeup
* use syscon/regmap for sysfabric_service implementation
* devicetree format:

**  split between .dtsi and dts
**  dual license
**  node and manufacturer naming

* intoduce devicetree in two separate patches
* multiple format fixes
* rebased on d932006 (for-next)

---
V3:
* small format changes
* rebased on f9db7e2 (for-next)

Tsahee Zidenberg (5):
ARM: Alpine: Initial support for Alpine platform
ARM: Alpine: early-debug print support
ARM: Alpine: smp support
ARM: dts: Alpine platform binding documentation
ARM: dts: Alpine platform devicetree

  .../devicetree/bindings/arm/al,alpine.txt          |  88 +++++++++++++
  .../bindings/arm/cpu-enable-method/al,alpine-smp   |  52 ++++++++
  .../devicetree/bindings/vendor-prefixes.txt        |   1 +
  arch/arm/Kconfig                                   |   2 +
  arch/arm/Kconfig.debug                             |  12 +-
  arch/arm/Makefile                                  |   1 +
  arch/arm/boot/dts/Makefile                         |   4 +
  arch/arm/boot/dts/alpine-db.dts                    |  35 +++++
  arch/arm/boot/dts/alpine.dtsi                      | 141 +++++++++++++++++++++
  arch/arm/mach-alpine/Kconfig                       |  10 ++
  arch/arm/mach-alpine/Makefile                      |   6 +
  arch/arm/mach-alpine/alpine_cpu_pm.c               |  70 ++++++++++
  arch/arm/mach-alpine/alpine_cpu_pm.h               |  26 ++++
  arch/arm/mach-alpine/alpine_cpu_resume.h           |  38 ++++++
  arch/arm/mach-alpine/alpine_machine.c              |  28 ++++
  arch/arm/mach-alpine/platsmp.c                     |  49 +++++++
  16 files changed, 562 insertions(+), 1 deletion(-)
Quoted 12 lines

create mode 100644 Documentation/devicetree/bindings/arm/al,alpine.txt create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp create mode 100644 arch/arm/boot/dts/alpine-db.dts
create mode 100644 arch/arm/boot/dts/alpine.dtsi
create mode 100644 arch/arm/mach-alpine/Kconfig
create mode 100644 arch/arm/mach-alpine/Makefile
create mode 100644 arch/arm/mach-alpine/alpine_cpu_pm.c
create mode 100644 arch/arm/mach-alpine/alpine_cpu_pm.h
create mode 100644 arch/arm/mach-alpine/alpine_cpu_resume.h
create mode 100644 arch/arm/mach-alpine/alpine_machine.c
create mode 100644 arch/arm/mach-alpine/platsmp.c

You need to add an entry in the MAINTAINERS file, so that get_maintainers.pl script
adds the right guys for patch impacting your machine.

Br,
Maxime

#2 lore raw

v3 cover Introducing the Alpine platform.

Thank you!
will do.

Quoted 90 lines · Maxime Coquelin

Hi Tsahee,

Quoted 68 lines · Tsahee Zidenberg

Annapurna Labs(TM) is a technology company providing innovative solutions including chips, software, and systems for the datacenter and enterprise infrastructure.

Alpine(TM) is one of Annapurna Labs? chip products targeting storage and networking applications. It is a complete Platform-On-Chip, integrating 2-4 cortex-A15 cores and multiple innovations to provide a seamless networking and storage fabric for enterprise and datacenter equipment.

This patchset provides initial support for the Alpine platform.

Patch #1 contains minimal, single-cpu architecture support.

Patch #2 adds early-debug capabilities via Alpine UART 0.

Patch #3 adds smp-support and a secondary cpu enable-method for the platform.

Patch #4 provides documentation for the available device-tree nodes.

Patch #5 provides a device-tree for Alpine soc and development board.

The patchset was tested with multi_v7_defconfig, adding CONFIG_ARCH_ALPINE

---
V2:
* map physical cpu-id from logical on cpu wakeup
* use syscon/regmap for sysfabric_service implementation
* devicetree format:

**  split between .dtsi and dts
**  dual license
**  node and manufacturer naming

* intoduce devicetree in two separate patches
* multiple format fixes
* rebased on d932006 (for-next)

---
V3:
* small format changes
* rebased on f9db7e2 (for-next)

Tsahee Zidenberg (5):
ARM: Alpine: Initial support for Alpine platform
ARM: Alpine: early-debug print support
ARM: Alpine: smp support
ARM: dts: Alpine platform binding documentation
ARM: dts: Alpine platform devicetree

  .../devicetree/bindings/arm/al,alpine.txt          |  88 +++++++++++++
  .../bindings/arm/cpu-enable-method/al,alpine-smp   |  52 ++++++++
  .../devicetree/bindings/vendor-prefixes.txt        |   1 +
  arch/arm/Kconfig                                   |   2 +
  arch/arm/Kconfig.debug                             |  12 +-
  arch/arm/Makefile                                  |   1 +
  arch/arm/boot/dts/Makefile                         |   4 +
  arch/arm/boot/dts/alpine-db.dts                    |  35 +++++
  arch/arm/boot/dts/alpine.dtsi                      | 141
+++++++++++++++++++++
  arch/arm/mach-alpine/Kconfig                       |  10 ++
  arch/arm/mach-alpine/Makefile                      |   6 +
  arch/arm/mach-alpine/alpine_cpu_pm.c               |  70 ++++++++++
  arch/arm/mach-alpine/alpine_cpu_pm.h               |  26 ++++
  arch/arm/mach-alpine/alpine_cpu_resume.h           |  38 ++++++
  arch/arm/mach-alpine/alpine_machine.c              |  28 ++++
  arch/arm/mach-alpine/platsmp.c                     |  49 +++++++
  16 files changed, 562 insertions(+), 1 deletion(-)
Quoted 13 lines

create mode 100644 Documentation/devicetree/bindings/arm/al,alpine.txt create mode 100644
Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
create mode 100644 arch/arm/boot/dts/alpine-db.dts
create mode 100644 arch/arm/boot/dts/alpine.dtsi
create mode 100644 arch/arm/mach-alpine/Kconfig
create mode 100644 arch/arm/mach-alpine/Makefile
create mode 100644 arch/arm/mach-alpine/alpine_cpu_pm.c create mode 100644 arch/arm/mach-alpine/alpine_cpu_pm.h create mode 100644 arch/arm/mach-alpine/alpine_cpu_resume.h create mode 100644 arch/arm/mach-alpine/alpine_machine.c create mode 100644 arch/arm/mach-alpine/platsmp.c

You need to add an entry in the MAINTAINERS file, so that get_maintainers.pl script
adds the right guys for patch impacting your machine.

Br,
Maxime