Support for Atom BayTrail/ValleyView power button
Hello list,
I'm trying to get a "Zotac ZBOX pico 320" (Intel Atom Z3735F, 64bit capable) to work with ubuntu linux 14.04, kernel 3.19rc6 64bit. Its been a rough trip because this box comes delivered with Windows 8.1 32bit (with bing :) and only sports a 32bit EFI, which makes things complicated.
One of the remaining issues with linux is that the power button doesn't work, so when I press it, linux won't shut down. Not sure if this is also due to its special EFI.
On other machines with working buttons, dmesg shows lines such as
[ 2.365323] ACPI: Power Button [PWRB] [ 2.365350] ACPI: Power Button [PWRF]
On the zbox, there's no such output. Running "acpi_listen" and pushing the button doesn't do anything either.
# lspci 00:00.0 Host bridge: Intel Corporation ValleyView SSA-CUnit (rev 0f) 00:02.0 VGA compatible controller: Intel Corporation ValleyView Gen7 (rev 0f) 00:1a.0 Encryption controller: Intel Corporation ValleyView SEC (rev 0f) 00:1d.0 USB controller: Intel Corporation ValleyView USB Enhanced Host Controller (rev 0f) 00:1f.0 ISA bridge: Intel Corporation ValleyView Power Control Unit (rev 0f)
A complete dmesg is also attached. My questions:
- Is this the right list to ask my question? If no, where should I ask?
- Why doesn't it work, and how can I help make it work?
Thank you!
Ben
# uname -a Linux zotaczboxpi320 3.19.0-031900rc6-generic #201501261152 SMP Mon Jan 26 16:53:27 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-031900rc6-generic (kernel@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201501261152 SMP Mon Jan 26 16:53:27 UTC 2015 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-031900rc6-generic root=UUID=0eb830d0-4493-422e-9d21-b2dea11e96c9 ro vt.handoff=1 nosplash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x00000000763cafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000763cb000-0x00000000763fafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000763fb000-0x0000000076425fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000076426000-0x00000000764cdfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000764ce000-0x00000000765e1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000765e2000-0x000000007662afff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007662b000-0x0000000076cfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0x76425000 ACPI 2.0=0x76425014 SMBIOS=0x765e1390 [ 0.000000] efi: mem00: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x000000000008f000) (0MB) [ 0.000000] efi: mem01: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000000008f000-0x0000000000090000) (0MB) [ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000090000-0x000000000009e000) (0MB) [ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009e000-0x00000000000a0000) (0MB) [ 0.000000] efi: mem04: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x00000000014d5000) (19MB) [ 0.000000] efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000014d5000-0x0000000002000000) (11MB) [ 0.000000] efi: mem06: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000002000000-0x00000000033d5000) (19MB) [ 0.000000] efi: mem07: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000033d5000-0x0000000020000000) (460MB) [ 0.000000] efi: mem08: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000020000000-0x0000000020200000) (2MB) [ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000020200000-0x0000000035ca6000) (346MB) [ 0.000000] efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000035ca6000-0x0000000036e4b000) (17MB) [ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000036e4b000-0x00000000560cc000) (498MB) [ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000560cc000-0x0000000072d00000) (460MB) [ 0.000000] efi: mem13: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000072d00000-0x0000000072d20000) (0MB) [ 0.000000] efi: mem14: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000072d20000-0x0000000072f5f000) (2MB) [ 0.000000] efi: mem15: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000072f5f000-0x0000000072f74000) (0MB) [ 0.000000] efi: mem16: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000072f74000-0x0000000075dcb000) (46MB) [ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000075dcb000-0x0000000076259000) (4MB) [ 0.000000] efi: mem18: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000076259000-0x0000000076263000) (0MB) [ 0.000000] efi: mem19: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000076263000-0x00000000763cb000) (1MB) [ 0.000000] efi: mem20: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000763cb000-0x00000000763fb000) (0MB) [ 0.000000] efi: mem21: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000763fb000-0x0000000076426000) (0MB) [ 0.000000] efi: mem22: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x0000000076426000-0x00000000764ce000) (0MB) [ 0.000000] efi: mem23: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000764ce000-0x00000000765e2000) (1MB) [ 0.000000] efi: mem24: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000765e2000-0x000000007662b000) (0MB) [ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000007662b000-0x0000000076cf6000) (6MB) [ 0.000000] efi: mem26: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000076cf6000-0x0000000076cf7000) (0MB) [ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000076cf7000-0x0000000076d00000) (0MB) [ 0.000000] efi: mem28: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e00f8000-0x00000000e00f9000) (0MB) [ 0.000000] efi: mem29: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed01000-0x00000000fed02000) (0MB) [ 0.000000] efi: mem30: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed08000-0x00000000fed09000) (0MB) [ 0.000000] efi: mem31: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ffb00000-0x0000000100000000) (5MB) [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: ZOTAC ZBOX-PI320 Series/ZBOX-PI320, BIOS B253P013 10/29/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x76d00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 base 060000000 mask FF0000000 write-back [ 0.000000] 3 base 070000000 mask FF8000000 write-back [ 0.000000] 4 base 070000000 mask FF8000000 write-back [ 0.000000] 5 base 077000000 mask FFF000000 uncachable [ 0.000000] 6 base 076E00000 mask FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 1GB, type WB [ 0.000000] reg 1, base: 1GB, range: 512MB, type WB [ 0.000000] reg 2, base: 1536MB, range: 256MB, type WB [ 0.000000] reg 3, base: 1792MB, range: 128MB, type WB [ 0.000000] reg 4, base: 1792MB, range: 128MB, type WB [ 0.000000] reg 5, base: 1904MB, range: 16MB, type UC [ 0.000000] reg 6, base: 1902MB, range: 2MB, type UC [ 0.000000] total RAM covered: 1902M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 1902MB, range: 2MB, type UC [ 0.000000] reg 2, base: 1904MB, range: 16MB, type UC [ 0.000000] reg 3, base: 1920MB, range: 128MB, type UC [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02fd0000, 0x02fd0fff] PGTABLE [ 0.000000] BRK [0x02fd1000, 0x02fd1fff] PGTABLE [ 0.000000] BRK [0x02fd2000, 0x02fd2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x76000000-0x761fffff] [ 0.000000] [mem 0x76000000-0x761fffff] page 2M [ 0.000000] BRK [0x02fd3000, 0x02fd3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x60000000-0x75ffffff] [ 0.000000] [mem 0x60000000-0x75ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff] [ 0.000000] [mem 0x40000000-0x5fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x76200000-0x763cafff] [ 0.000000] [mem 0x76200000-0x763cafff] page 4k [ 0.000000] BRK [0x02fd4000, 0x02fd4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7662b000-0x76cfffff] [ 0.000000] [mem 0x7662b000-0x767fffff] page 4k [ 0.000000] [mem 0x76800000-0x76bfffff] page 2M [ 0.000000] [mem 0x76c00000-0x76cfffff] page 4k [ 0.000000] BRK [0x02fd5000, 0x02fd5fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35ca6000-0x36e4afff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000076425014 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x0000000076424100 000084 (v01 ALASKA A M I 00000003 MSFT 0100000D) [ 0.000000] ACPI: FACP 0x0000000076422000 00010C (v05 ALASKA A M I 00000003 AMI 0100000D) [ 0.000000] ACPI: DSDT 0x000000007640E000 00FA77 (v02 ALASKA A M I 00000003 AMI 0100000D) [ 0.000000] ACPI: MSDM 0x0000000076423000 000055 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: UEFI 0x0000000076492000 000042 (v01 ALASKA A M I 00000000 00000000) [ 0.000000] ACPI: HPET 0x0000000076421000 000038 (v01 ALASKA A M I 00000003 AMI 0100000D) [ 0.000000] ACPI: LPIT 0x0000000076420000 000104 (v01 ALASKA A M I 00000003 AMI 0100000D) [ 0.000000] ACPI: APIC 0x000000007641F000 00006C (v03 ALASKA A M I 00000003 AMI 0100000D) [ 0.000000] ACPI: MCFG 0x000000007641E000 00003C (v01 ALASKA A M I 00000003 AMI 0100000D) [ 0.000000] ACPI: FPDT 0x0000000076407000 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x0000000076406000 000763 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x0000000076405000 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x0000000076404000 00017A (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: CSRT 0x000000007640D000 00014C (v00 ALASKA A M I 00000005 INTL 20120624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000076cfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7625d000-0x76261fff] [ 0.000000] [ffffea0000000000-ffffea0001dfffff] PMD -> [ffff880070a00000-ffff8800727fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0x76cfffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0008efff] [ 0.000000] node 0: [mem 0x00090000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x763cafff] [ 0.000000] node 0: [mem 0x7662b000-0x76cfffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x76cfffff] [ 0.000000] On node 0 totalpages: 485436 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7540 pages used for memmap [ 0.000000] DMA32 zone: 481440 pages, LIFO batch:31 [ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 0.000000] Reserving Intel graphics stolen memory at 0x77000000-0x7effffff [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-86 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x763cb000-0x763fafff] [ 0.000000] PM: Registered nosave memory: [mem 0x763fb000-0x76425fff] [ 0.000000] PM: Registered nosave memory: [mem 0x76426000-0x764cdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x764ce000-0x765e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x765e2000-0x7662afff] [ 0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff880076000000 s86976 r8192 d31808 u524288 [ 0.000000] pcpu-alloc: s86976 r8192 d31808 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 477810 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-031900rc6-generic root=UUID=0eb830d0-4493-422e-9d21-b2dea11e96c9 ro vt.handoff=1 nosplash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1819864K/1941744K available (8026K kernel code, 1163K rwdata, 3852K rodata, 1408K init, 1292K bss, 121880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:1024 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Maximum core-clock to bus-clock ratio: 0x10 [ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz [ 0.000000] TSC runs at 1331200 KHz [ 0.000000] lapic_timer_frequency = 332800 [ 0.000000] tsc: Detected 1331.200 MHz processor [ 0.000059] Calibrating delay loop (skipped), value calculated using timer frequency.. 2662.40 BogoMIPS (lpj=5324800) [ 0.000077] pid_max: default: 32768 minimum: 301 [ 0.000096] ACPI: Core revision 20141107 [ 0.037611] ACPI: All ACPI Tables successfully acquired [ 0.039370] Security Framework initialized [ 0.039399] AppArmor: AppArmor initialized [ 0.039409] Yama: becoming mindful. [ 0.039893] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.041342] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.042003] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.042029] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.042534] Initializing cgroup subsys memory [ 0.042559] Initializing cgroup subsys devices [ 0.042574] Initializing cgroup subsys freezer [ 0.042586] Initializing cgroup subsys net_cls [ 0.042598] Initializing cgroup subsys blkio [ 0.042609] Initializing cgroup subsys perf_event [ 0.042622] Initializing cgroup subsys net_prio [ 0.042633] Initializing cgroup subsys hugetlb [ 0.042685] CPU: Physical Processor ID: 0 [ 0.042695] CPU: Processor Core ID: 0 [ 0.042708] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.042708] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.047657] mce: CPU supports 6 MCE banks [ 0.047676] CPU0: Thermal monitoring enabled (TM1) [ 0.047694] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.047694] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.047876] Freeing SMP alternatives memory: 28K (ffffffff81e84000 - ffffffff81e8b000) [ 0.054863] ftrace: allocating 32886 entries in 129 pages [ 0.084710] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.124409] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.124419] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.124427] ..... (found apic 0 pin 0) ... [ 0.164110] ....... works. [ 0.164118] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3735F @ 1.33GHz (fam: 06, model: 37, stepping: 08) [ 0.164157] TSC deadline timer enabled [ 0.164209] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.164241] ... version: 3 [ 0.164248] ... bit width: 40 [ 0.164254] ... generic registers: 2 [ 0.164261] ... value mask: 000000ffffffffff [ 0.164268] ... max period: 000000ffffffffff [ 0.164275] ... fixed-purpose events: 3 [ 0.164282] ... event mask: 0000000700000003 [ 0.166507] x86: Booting SMP configuration: [ 0.166521] .... node #0, CPUs: #1 [ 0.184610] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.184993] #2 #3 [ 0.221203] x86: Booted up 1 node, 4 CPUs [ 0.221218] smpboot: Total of 4 processors activated (10649.60 BogoMIPS) [ 0.222643] devtmpfs: initialized [ 0.233950] evm: security.selinux [ 0.233960] evm: security.SMACK64 [ 0.233966] evm: security.SMACK64EXEC [ 0.233973] evm: security.SMACK64TRANSMUTE [ 0.233979] evm: security.SMACK64MMAP [ 0.233985] evm: security.ima [ 0.233991] evm: security.capability [ 0.234153] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) [ 0.234166] PM: Registering ACPI NVS region [mem 0x76426000-0x764cdfff] (688128 bytes) [ 0.234609] pinctrl core: initialized pinctrl subsystem [ 0.234884] RTC time: 15:39:05, date: 02/06/15 [ 0.235241] NET: Registered protocol family 16 [ 0.240534] cpuidle: using governor ladder [ 0.244545] cpuidle: using governor menu [ 0.244717] ACPI: bus type PCI registered [ 0.244727] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.244955] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.244970] PCI: not using MMCONFIG [ 0.244977] PCI: Using configuration type 1 for base access [ 0.250492] ACPI: Added _OSI(Module Device) [ 0.250505] ACPI: Added _OSI(Processor Device) [ 0.250513] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.250521] ACPI: Added _OSI(Processor Aggregator Device) [ 0.277235] ACPI: Dynamic OEM Table Load: [ 0.277274] ACPI: SSDT 0xFFFF880070333000 000501 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.279200] ACPI: Dynamic OEM Table Load: [ 0.279222] ACPI: SSDT 0xFFFF880070333800 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.281788] ACPI: Dynamic OEM Table Load: [ 0.281810] ACPI: SSDT 0xFFFF880070365A00 00015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.283669] ACPI: Dynamic OEM Table Load: [ 0.283689] ACPI: SSDT 0xFFFF880070359840 00008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.287726] ACPI: Interpreter enabled [ 0.287747] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580) [ 0.287770] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.287791] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20141107/hwxface-580) [ 0.287832] ACPI: (supports S0 S4 S5) [ 0.287841] ACPI: Using IOAPIC for interrupt routing [ 0.287910] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.299323] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources [ 0.299339] PCI: not using MMCONFIG [ 0.299388] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.305445] ACPI: Power Resource [USBC] (on) [ 0.306288] ACPI: Power Resource [WWPR] (off) [ 0.312388] ACPI: Power Resource [PLPE] (on) [ 0.323910] ACPI: Power Resource [CLK0] (on) [ 0.324050] ACPI: Power Resource [CLK1] (on) [ 0.324831] ACPI: Power Resource [P28X] (off) [ 0.324969] ACPI: Power Resource [P18X] (off) [ 0.326169] ACPI: Power Resource [P28P] (off) [ 0.326305] ACPI: Power Resource [P18P] (off) [ 0.336620] ACPI: Power Resource [P28T] (off) [ 0.336763] ACPI: Power Resource [P18T] (off) [ 0.336897] ACPI: Power Resource [P1XT] (off) [ 0.339366] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.339388] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.339523] \_SB_.PCI0:_OSC invalid UUID [ 0.339528] _OSC request data:1 1e 0 [ 0.339540] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.340295] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.340832] PCI host bridge to bus 0000:00 [ 0.340847] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.340859] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] [ 0.340869] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] [ 0.340880] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.340891] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.340902] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.340913] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] [ 0.340924] pci_bus 0000:00: root bus resource [mem 0x90800000-0x90bfffff] [ 0.340935] pci_bus 0000:00: root bus resource [mem 0x77000001-0x7f000000] [ 0.340946] pci_bus 0000:00: root bus resource [mem 0x80000000-0x906ffffe] [ 0.340957] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff] [ 0.340980] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.341238] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.341261] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff] [ 0.341279] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref] [ 0.341296] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007] [ 0.341598] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.341634] pci 0000:00:1a.0: reg 0x10: [mem 0x90500000-0x905fffff] [ 0.341653] pci 0000:00:1a.0: reg 0x14: [mem 0x90400000-0x904fffff] [ 0.341786] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.342031] pci 0000:00:1d.0: [8086:0f34] type 00 class 0x0c0320 [ 0.342068] pci 0000:00:1d.0: reg 0x10: [mem 0x9060d000-0x9060d3ff] [ 0.342215] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.342450] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.343642] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.343857] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.344078] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.344283] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.344486] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.344689] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.344893] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.345097] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.345587] platform 80860F28:00: failed to claim resource 0 [ 0.345603] acpi 80860F28:00: platform device creation failed: -16 [ 0.355054] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.355069] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.355082] vgaarb: loaded [ 0.355088] vgaarb: bridge control possible 0000:00:02.0 [ 0.355828] SCSI subsystem initialized [ 0.355973] libata version 3.00 loaded. [ 0.356060] ACPI: bus type USB registered [ 0.356137] usbcore: registered new interface driver usbfs [ 0.356176] usbcore: registered new interface driver hub [ 0.356242] usbcore: registered new device driver usb [ 0.356792] PCI: Using ACPI for IRQ routing [ 0.356804] PCI: pci_cache_line_size set to 64 bytes [ 0.356832] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.356845] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 0.356850] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.356855] e820: reserve RAM buffer [mem 0x763cb000-0x77ffffff] [ 0.356860] e820: reserve RAM buffer [mem 0x76d00000-0x77ffffff] [ 0.357187] NetLabel: Initializing [ 0.357196] NetLabel: domain hash size = 128 [ 0.357202] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.357238] NetLabel: unlabeled traffic allowed by default [ 0.357525] Switched to clocksource refined-jiffies [ 0.374848] AppArmor: AppArmor Filesystem Enabled [ 0.375048] pnp: PnP ACPI init [ 0.375202] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.375532] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.375547] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.375559] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.375571] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.375583] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.375597] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.375864] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.378997] pnp: PnP ACPI: found 3 devices [ 0.385430] pci_bus 0000:00: resource 4 [io 0x0000-0x006f] [ 0.385439] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7] [ 0.385446] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] [ 0.385452] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 0.385458] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] [ 0.385464] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] [ 0.385470] pci_bus 0000:00: resource 10 [mem 0x90800000-0x90bfffff] [ 0.385477] pci_bus 0000:00: resource 11 [mem 0x77000001-0x7f000000] [ 0.385483] pci_bus 0000:00: resource 12 [mem 0x80000000-0x906ffffe] [ 0.385501] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed40fff] [ 0.385575] NET: Registered protocol family 2 [ 0.386013] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.386140] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.386264] TCP: Hash tables configured (established 16384 bind 16384) [ 0.386324] TCP: reno registered [ 0.386346] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.386384] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.386519] NET: Registered protocol family 1 [ 0.386564] pci 0000:00:02.0: Video device with shadowed ROM [ 0.386936] PCI: CLS 0 bytes, default 64 [ 0.387105] Trying to unpack rootfs image as initramfs... [ 1.154172] Freeing initrd memory: 18068K (ffff880035ca6000 - ffff880036e4b000) [ 1.154833] microcode: CPU0 sig=0x30678, pf=0x2, revision=0x82b [ 1.154857] microcode: CPU1 sig=0x30678, pf=0x2, revision=0x82b [ 1.154884] microcode: CPU2 sig=0x30678, pf=0x2, revision=0x82b [ 1.154911] microcode: CPU3 sig=0x30678, pf=0x2, revision=0x82b [ 1.155067] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba [ 1.155200] Scanning for low memory corruption every 60 seconds [ 1.156221] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.156266] Initialise system trusted keyring [ 1.156338] audit: initializing netlink subsys (disabled) [ 1.156387] audit: type=2000 audit(1423237146.112:1): initialized [ 1.157141] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.162331] zpool: loaded [ 1.162343] zbud: loaded [ 1.162763] VFS: Disk quotas dquot_6.5.2 [ 1.162890] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.164495] fuse init (API version 7.23) [ 1.164940] Key type big_key registered [ 1.165798] Key type asymmetric registered [ 1.165813] Asymmetric key parser 'x509' registered [ 1.165939] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.166041] io scheduler noop registered [ 1.166055] io scheduler deadline registered (default) [ 1.166167] io scheduler cfq registered [ 1.166377] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.166439] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.166567] efifb: probing for efifb [ 1.166633] efifb: framebuffer at 0x80000000, mapped to 0xffffc90000480000, using 8128k, total 8128k [ 1.166646] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.166653] efifb: scrolling: redraw [ 1.166662] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.185607] Console: switching to colour frame buffer device 240x67 [ 1.204440] fb0: EFI VGA frame buffer device [ 1.204531] intel_idle: MWAIT substates: 0x33000020 [ 1.204537] intel_idle: v0.4 model 0x37 [ 1.204540] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.205229] ACPI Exception: AE_ERROR, Returned by Handler for [GeneralPurposeIo] (20141107/evregion-297) [ 1.205394] ACPI Error: Method parse/execution failed [\_SB_.ADP1._PSR] (Node ffff8800728bc9b0), AE_ERROR (20141107/psparse-536) [ 1.205601] ACPI Exception: AE_ERROR, Error reading AC Adapter state (20141107/ac-131) [ 1.210534] [Firmware Bug]: No valid trip found [ 1.210723] GHES: HEST is not enabled! [ 1.211067] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.231306] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.236035] hpet: number irqs doesn't agree with number of timers [ 1.236214] Linux agpgart interface v0.103 [ 1.240571] brd: module loaded [ 1.242816] loop: module loaded [ 1.243526] libphy: Fixed MDIO Bus: probed [ 1.243600] tun: Universal TUN/TAP device driver, 1.6 [ 1.243678] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.243901] PPP generic driver version 2.4.2 [ 1.244183] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.244298] ehci-pci: EHCI PCI platform driver [ 1.244624] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.244721] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.244854] ehci-pci 0000:00:1d.0: debug port 2 [ 1.248854] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.248889] ehci-pci 0000:00:1d.0: irq 23, io mem 0x9060d000 [ 1.262909] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.263121] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.263229] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.263340] usb usb1: Product: EHCI Host Controller [ 1.263416] usb usb1: Manufacturer: Linux 3.19.0-031900rc6-generic ehci_hcd [ 1.263522] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.263929] hub 1-0:1.0: USB hub found [ 1.264014] hub 1-0:1.0: 8 ports detected [ 1.264749] ehci-platform: EHCI generic platform driver [ 1.264870] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.264978] ohci-pci: OHCI PCI platform driver [ 1.265081] ohci-platform: OHCI generic platform driver [ 1.265192] uhci_hcd: USB Universal Host Controller Interface driver [ 1.265436] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.989180] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.122249] usb 1-1: New USB device found, idVendor=8087, idProduct=07e6 [ 2.122358] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.123007] hub 1-1:1.0: USB hub found [ 2.123171] hub 1-1:1.0: 4 ports detected [ 2.299867] i8042: No controller found [ 2.304213] Switched to clocksource tsc [ 2.304719] mousedev: PS/2 mouse device common for all mice [ 2.304994] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20141107/evxface-643) [ 2.304999] rtc_cmos 00:00: RTC can wake from S4 [ 2.305088] rtc (null): invalid alarm value: 2015-2-6 15:65:63 [ 2.305301] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 2.305338] rtc_cmos 00:00: alarms up to one day, 242 bytes nvram [ 2.305585] device-mapper: uevent: version 1.0.3 [ 2.306007] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected] [ 2.306038] Intel P-state driver initializing. [ 2.306425] ledtrig-cpu: registered to indicate activity on CPUs [ 2.306432] EFI Variables Facility v0.08 2004-May-17 [ 2.312093] PCCT header not found. [ 2.312094] ACPI PCC probe failed. [ 2.312338] TCP: cubic registered [ 2.312600] NET: Registered protocol family 10 [ 2.313531] NET: Registered protocol family 17 [ 2.313562] Key type dns_resolver registered [ 2.315217] Loading compiled-in X.509 certificates [ 2.317275] Loaded X.509 cert 'Magrathea: Glacier signing key: 43dbbfb67f6a8fa4dcf7857f524e05f411517371' [ 2.317302] registered taskstats version 1 [ 2.324981] Key type trusted registered [ 2.339256] Key type encrypted registered [ 2.339274] AppArmor: AppArmor sha1 policy hashing enabled [ 2.339280] ima: No TPM chip found, activating TPM-bypass! [ 2.339333] evm: HMAC attrs: 0x1 [ 2.340578] Magic number: 3:149:689 [ 2.343088] rtc_cmos 00:00: setting system clock to 2015-02-06 15:39:08 UTC (1423237148) [ 2.343645] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.343646] EDD information not available. [ 2.343929] PM: Hibernation image not present or could not be loaded. [ 2.405490] Freeing unused kernel memory: 1408K (ffffffff81d24000 - ffffffff81e84000) [ 2.408900] Write protecting the kernel read-only data: 12288k [ 2.413739] Freeing unused kernel memory: 152K (ffff8800027da000 - ffff880002800000) [ 2.418053] Freeing unused kernel memory: 244K (ffff880002bc3000 - ffff880002c00000) [ 2.473114] systemd-udevd[120]: starting version 204 [ 2.502407] sdhci: Secure Digital Host Controller Interface driver [ 2.506127] sdhci: Copyright(c) Pierre Ossman [ 2.514071] sdhci-acpi 80860F14:00: No vmmc regulator found [ 2.514074] sdhci-acpi 80860F14:00: No vqmmc regulator found [ 2.514124] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 2.517346] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA [ 2.518549] sdhci-acpi INT33BB:00: No vmmc regulator found [ 2.518551] sdhci-acpi INT33BB:00: No vqmmc regulator found [ 2.521985] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA [ 2.523402] sdhci-acpi 80860F14:01: No vmmc regulator found [ 2.523406] sdhci-acpi 80860F14:01: No vqmmc regulator found [ 2.526943] mmc2: SDHCI controller on ACPI [80860F14:01] using ADMA [ 2.618734] usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101 [ 2.623092] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.627385] usb 1-1.1: Product: USB 2.0 Hub [ 2.633381] hub 1-1.1:1.0: USB hub found [ 2.638125] hub 1-1.1:1.0: 4 ports detected [ 2.735212] mmc0: BKOPS_EN bit is not set [ 2.756324] mmc0: new HS200 MMC card at address 0001 [ 2.766251] Driver 'mmcblk' needs updating - please use bus_type methods [ 2.769940] mmcblk0: mmc0:0001 BWBC3R 29.1 GiB [ 2.774069] mmcblk0boot0: mmc0:0001 BWBC3R partition 1 4.00 MiB [ 2.778496] mmcblk0boot1: mmc0:0001 BWBC3R partition 2 4.00 MiB [ 2.782461] mmcblk0rpmb: mmc0:0001 BWBC3R partition 3 4.00 MiB [ 2.795667] mmcblk0: p1 p2 p3 [ 2.844532] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 2.851111] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.857364] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.865921] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.936419] usb 1-1.1.1: new full-speed USB device number 4 using ehci-pci [ 2.942042] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem [ 2.944488] mmc1: new high speed SDIO card at address 0001 [ 2.948876] EXT4-fs (mmcblk0p3): write access will be enabled during recovery [ 3.001753] EXT4-fs (mmcblk0p3): recovery complete [ 3.007127] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 3.055350] usb 1-1.1.1: New USB device found, idVendor=045e, idProduct=0745 [ 3.059631] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.062844] usb 1-1.1.1: Product: Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0 [ 3.066079] usb 1-1.1.1: Manufacturer: Microsoft [ 3.140665] usb 1-1.1.4: new high-speed USB device number 5 using ehci-pci [ 3.237418] usb 1-1.1.4: New USB device found, idVendor=0bda, idProduct=8152 [ 3.240819] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.244168] usb 1-1.1.4: Product: USB 10/100 LAN [ 3.247467] usb 1-1.1.4: Manufacturer: Realtek [ 3.247470] usb 1-1.1.4: SerialNumber: 00012E58F054 [ 3.308705] random: init urandom read with 37 bits of entropy available [ 3.394415] init: plymouth-upstart-bridge main process (181) terminated with status 1 [ 3.398791] init: plymouth-upstart-bridge main process ended, respawning [ 3.417768] init: plymouth-upstart-bridge main process (191) terminated with status 1 [ 3.422042] init: plymouth-upstart-bridge main process ended, respawning [ 3.439563] init: plymouth-upstart-bridge main process (195) terminated with status 1 [ 3.444106] init: plymouth-upstart-bridge main process ended, respawning [ 3.461981] init: ureadahead main process (184) terminated with status 5 [ 3.645462] Adding 1112060k swap on /dev/mmcblk0p2. Priority:-1 extents:1 across:1112060k SSFS [ 3.830009] EXT4-fs (mmcblk0p3): re-mounted. Opts: errors=remount-ro [ 3.877288] systemd-udevd[324]: starting version 204 [ 4.018781] lp: driver loaded but no devices found [ 4.043119] ppdev: user-space parallel port driver [ 4.183203] 80860F0A:00: ttyS4 at MMIO 0x90736000 (irq = 39, base_baud = 2764800) is a 16550A [ 4.248363] byt_gpio INT33FC:02: pin 16 cannot be used as GPIO. [ 4.255000] [drm] Initialized drm 1.1.0 20060810 [ 4.334020] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 4.349506] [Firmware Bug]: No valid trip found [ 4.358506] [drm] Memory usable by graphics device = 2048M [ 4.358517] checking generic (80000000 7f0000) vs hw (80000000 10000000) [ 4.358521] fb: switching to inteldrmfb from EFI VGA [ 4.358584] Console: switching to colour dummy device 80x25 [ 4.358598] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels [ 4.359002] [drm] Replacing VGA console driver [ 4.362146] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.362153] [drm] Driver supports precise vblank timestamp query. [ 4.386006] Bluetooth: Core ver 2.20 [ 4.386096] NET: Registered protocol family 31 [ 4.386101] Bluetooth: HCI device and connection manager initialized [ 4.386111] Bluetooth: HCI socket layer initialized [ 4.386118] Bluetooth: L2CAP socket layer initialized [ 4.386134] Bluetooth: SCO socket layer initialized [ 4.409688] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.409696] Bluetooth: BNEP filters: protocol multicast [ 4.409708] Bluetooth: BNEP socket layer initialized [ 4.410370] Bluetooth: RFCOMM TTY layer initialized [ 4.410389] Bluetooth: RFCOMM socket layer initialized [ 4.410404] Bluetooth: RFCOMM ver 1.11 [ 4.412585] hidraw: raw HID events driver (C) Jiri Kosina [ 4.562127] init: cups main process (493) killed by HUP signal [ 4.562162] init: cups main process ended, respawning [ 4.611687] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.625890] usbcore: registered new interface driver r8152 [ 4.641624] usbcore: registered new interface driver cdc_ether [ 4.661161] usbcore: registered new interface driver usbhid [ 4.661169] usbhid: USB HID core driver [ 4.678867] cfg80211: Calling CRDA to update world regulatory domain [ 4.699554] usb 1-1.1.4: reset high-speed USB device number 5 using ehci-pci [ 4.706811] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.714192] acpi device:09: registered as cooling_device4 [ 4.714736] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input0 [ 4.719126] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0 [ 4.720251] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A [ 4.720260] mei_txe 0000:00:1a.0: PCI INT A: no GSI [ 4.773261] SSE version of gcm_enc/dec engaged. [ 4.794045] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.795729] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.797296] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.800152] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.821960] r8152 1-1.1.4:1.0 eth0: v1.07.0 (2014/10/09) [ 4.864891] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 4.873485] fbcon: inteldrmfb (fb0) is primary device [ 4.873786] usbcore: registered new interface driver brcmfmac [ 4.930766] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input1 [ 4.932992] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input2 [ 4.948883] intel_soc_dts_thermal: request_threaded_irq ret -22 [ 4.960926] intel_rapl: Found RAPL domain package [ 4.960930] intel_rapl: Found RAPL domain core [ 5.006856] random: nonblocking pool is initialized [ 5.016107] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/0003:045E:0745.0001/input/input3 [ 5.052417] cfg80211: World regulatory domain updated: [ 5.052421] cfg80211: DFS Master region: unset [ 5.052421] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 5.052436] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 5.052439] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 5.052441] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 5.052453] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 5.052455] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 5.071996] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0] on usb-0000:00:1d.0-1.1.1/input0 [ 5.073285] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/0003:045E:0745.0002/input/input4 [ 5.128115] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0] on usb-0000:00:1d.0-1.1.1/input1 [ 5.139912] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.2/0003:045E:0745.0003/input/input5 [ 5.187971] brcmf_c_preinit_dcmds: Firmware version = wl0: Jan 29 2014 01:40:06 version 5.97.39.4 FWID 01-c7b9d775 [ 5.196349] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0] on usb-0000:00:1d.0-1.1.1/input2 [ 5.207475] Console: switching to colour frame buffer device 240x67 [ 5.223909] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.223912] i915 0000:00:02.0: registered panic notifier [ 5.575422] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.885006] init: failsafe main process (612) killed by TERM signal [ 5.976522] init: network-manager main process (809) terminated with status 127 [ 5.976558] init: network-manager main process ended, respawning [ 6.245461] init: Failed to spawn whoopsie main process: unable to execute: No such file or directory [ 6.505254] init: lightdm main process (988) terminated with status 127 [ 6.526268] init: plymouth-ready (startup) main process (180) terminated with status 1 [ 7.748178] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
# lsmod Module Size Used by joydev 17587 0 mac_hid 13275 0 hid_generic 12559 0 intel_rapl 19714 0 intel_powerclamp 19099 0 coretemp 13638 0 kvm_intel 154139 0 gpio_keys 17976 0 kvm 480978 1 kvm_intel crct10dif_pclmul 14268 0 crc32_pclmul 13180 0 ghash_clmulni_intel 13230 0 aesni_intel 169686 0 aes_x86_64 17131 1 aesni_intel lrw 13323 1 aesni_intel gf128mul 14951 1 lrw brcmfmac 286568 0 glue_helper 14095 1 aesni_intel ablk_helper 13597 1 aesni_intel brcmutil 15781 1 brcmfmac cryptd 20531 3 ghash_clmulni_intel,aesni_intel,ablk_helper cdc_ether 14459 0 usbnet 44043 1 cdc_ether usbhid 53155 0 r8152 41840 0 mii 13981 2 r8152,usbnet cfg80211 551291 1 brcmfmac snd_intel_sst_acpi 13194 0 snd_intel_sst_core 72022 1 snd_intel_sst_acpi snd_soc_sst_mfld_platform 76644 1 snd_intel_sst_core snd_seq_midi 13564 0 snd_seq_midi_event 14899 1 snd_seq_midi lpc_ich 21176 0 mei_txe 19808 0 snd_rawmidi 31197 1 snd_seq_midi snd_soc_rt5640 93325 0 mei 88864 1 mei_txe snd_soc_rl6231 13037 1 snd_soc_rt5640 snd_soc_core 196850 2 snd_soc_rt5640,snd_soc_sst_mfld_platform snd_compress 19395 1 snd_soc_core snd_pcm_dmaengine 15229 1 snd_soc_core bmc150_accel 23476 0 industrialio_triggered_buffer 12882 1 bmc150_accel snd_pcm 106365 4 snd_soc_rt5640,snd_soc_core,snd_soc_sst_mfld_platform,snd_pcm_dmaengine kfifo_buf 13432 1 industrialio_triggered_buffer i2c_hid 19065 0 industrialio 55454 3 industrialio_triggered_buffer,kfifo_buf,bmc150_accel snd_seq 63540 2 snd_seq_midi_event,snd_seq_midi hid 110883 3 i2c_hid,hid_generic,usbhid bnep 23980 2 rfcomm 75100 0 goodix 13173 0 bluetooth 510653 10 bnep,rfcomm snd_seq_device 14875 3 snd_seq,snd_rawmidi,snd_seq_midi 8250_fintek 12924 0 i915 1087482 2 snd_timer 30118 2 snd_pcm,snd_seq video 24803 1 i915 drm_kms_helper 119701 1 i915 snd 84025 8 snd_soc_core,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_soc_sst_mfld_platform,snd_seq_device,snd_compress dw_dmac 12835 0 i2c_designware_platform 13025 0 drm 341532 4 i915,drm_kms_helper soc_button_array 12771 0 dw_dmac_core 28558 1 dw_dmac i2c_designware_core 14990 1 i2c_designware_platform soundcore 15091 1 snd i2c_algo_bit 13564 1 i915 rfkill_gpio 12886 0 acpi_pad 18183 0 snd_soc_sst_acpi 13007 0 spi_pxa2xx_platform 23453 0 8250_dw 13474 0 pwm_lpss_platform 12703 0 pwm_lpss 13281 1 pwm_lpss_platform iosf_mbi 13865 1 intel_rapl parport_pc 32909 0 ppdev 17711 0 nls_iso8859_1 12713 1 lp 17799 0 parport 42481 3 lp,ppdev,parport_pc mmc_block 36635 4 sdhci_acpi 13502 0 sdhci 44021 1 sdhci_acpi