arm: socfpga: Minor coding style fix
PATCH 1/10 arm: socfpga: Minor coding style fix
Replace multiple spaces with a single tab.
--- board/altera/socfpga/iocsr_config.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
board/altera/socfpga/iocsr_config.h +4 -4
@@ -9,9 +9,9 @@#ifndef _PRELOADER_IOCSR_CONFIG_H_#define _PRELOADER_IOCSR_CONFIG_H_ -#define CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH (764) -#define CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH (1719) -#define CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH (955) -#define CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH (16766) +#define CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH (764) +#define CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH (1719) +#define CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH (955) +#define CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH (16766)#endif /*_PRELOADER_IOCSR_CONFIG_H_*/
Signature · 1 line
2.1.3
PATCH 2/10 arm: socfpga: Sync Cyclone V DK pinmux configuration
Sync SoCFPGA Cyclone V development kit pinmux configuration with Rocketboard U-Boot v2013.01.01-114-g9381569 (ACDS14.1_REL_GSRD_PR).
--- board/altera/socfpga/pinmux_config.c | 188 +++++++++++++++++------------------ board/altera/socfpga/pinmux_config.h | 14 +-- 2 files changed, 101 insertions(+), 101 deletions(-)
board/altera/socfpga/pinmux_config.c +94 -94
@@ -4,100 +4,100 @@/* pin mux configuration data */ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM ] = { -0 ,/* EMACIO0 - Unused */ -2 ,/* EMACIO1 - USB */ -2 ,/* EMACIO2 - USB */ -2 ,/* EMACIO3 - USB */ -2 ,/* EMACIO4 - USB */ -2 ,/* EMACIO5 - USB */ -2 ,/* EMACIO6 - USB */ -2 ,/* EMACIO7 - USB */ -2 ,/* EMACIO8 - USB */ -0 ,/* EMACIO9 - Unused */ -2 ,/* EMACIO10 - USB */ -2 ,/* EMACIO11 - USB */ -2 ,/* EMACIO12 - USB */ -2 ,/* EMACIO13 - USB */ -0 ,/* EMACIO14 - N/A */ -0 ,/* EMACIO15 - N/A */ -0 ,/* EMACIO16 - N/A */ -0 ,/* EMACIO17 - N/A */ -0 ,/* EMACIO18 - N/A */ -0 ,/* EMACIO19 - N/A */ -3 ,/* FLASHIO0 - SDMMC */ -3 ,/* FLASHIO1 - SDMMC */ -3 ,/* FLASHIO2 - SDMMC */ -3 ,/* FLASHIO3 - SDMMC */ -0 ,/* FLASHIO4 - SDMMC */ -0 ,/* FLASHIO5 - SDMMC */ -0 ,/* FLASHIO6 - SDMMC */ -0 ,/* FLASHIO7 - SDMMC */ -0 ,/* FLASHIO8 - SDMMC */ -3 ,/* FLASHIO9 - SDMMC */ -3 ,/* FLASHIO10 - SDMMC */ -3 ,/* FLASHIO11 - SDMMC */ -3 ,/* GENERALIO0 - TRACE */ -3 ,/* GENERALIO1 - TRACE */ -3 ,/* GENERALIO2 - TRACE */ -3 ,/* GENERALIO3 - TRACE */ -3 ,/* GENERALIO4 - TRACE */ -3 ,/* GENERALIO5 - TRACE */ -3 ,/* GENERALIO6 - TRACE */ -3 ,/* GENERALIO7 - TRACE */ -3 ,/* GENERALIO8 - TRACE */ -3 ,/* GENERALIO9 - SPIM0 */ -3 ,/* GENERALIO10 - SPIM0 */ -3 ,/* GENERALIO11 - SPIM0 */ -3 ,/* GENERALIO12 - SPIM0 */ -2 ,/* GENERALIO13 - CAN0 */ -2 ,/* GENERALIO14 - CAN0 */ -3 ,/* GENERALIO15 - I2C0 */ -3 ,/* GENERALIO16 - I2C0 */ -2 ,/* GENERALIO17 - UART0 */ -2 ,/* GENERALIO18 - UART0 */ -0 ,/* GENERALIO19 - N/A */ -0 ,/* GENERALIO20 - N/A */ -0 ,/* GENERALIO21 - N/A */ -0 ,/* GENERALIO22 - N/A */ -0 ,/* GENERALIO23 - N/A */ -0 ,/* GENERALIO24 - N/A */ -0 ,/* GENERALIO25 - N/A */ -0 ,/* GENERALIO26 - N/A */ -0 ,/* GENERALIO27 - N/A */ -0 ,/* GENERALIO28 - N/A */ -0 ,/* GENERALIO29 - N/A */ -0 ,/* GENERALIO30 - N/A */ -0 ,/* GENERALIO31 - N/A */ -2 ,/* MIXED1IO0 - EMAC */ -2 ,/* MIXED1IO1 - EMAC */ -2 ,/* MIXED1IO2 - EMAC */ -2 ,/* MIXED1IO3 - EMAC */ -2 ,/* MIXED1IO4 - EMAC */ -2 ,/* MIXED1IO5 - EMAC */ -2 ,/* MIXED1IO6 - EMAC */ -2 ,/* MIXED1IO7 - EMAC */ -2 ,/* MIXED1IO8 - EMAC */ -2 ,/* MIXED1IO9 - EMAC */ -2 ,/* MIXED1IO10 - EMAC */ -2 ,/* MIXED1IO11 - EMAC */ -2 ,/* MIXED1IO12 - EMAC */ -2 ,/* MIXED1IO13 - EMAC */ -0 ,/* MIXED1IO14 - Unused */ -3 ,/* MIXED1IO15 - QSPI */ -3 ,/* MIXED1IO16 - QSPI */ -3 ,/* MIXED1IO17 - QSPI */ -3 ,/* MIXED1IO18 - QSPI */ -3 ,/* MIXED1IO19 - QSPI */ -3 ,/* MIXED1IO20 - QSPI */ -0 ,/* MIXED1IO21 - GPIO */ -0 ,/* MIXED2IO0 - N/A */ -0 ,/* MIXED2IO1 - N/A */ -0 ,/* MIXED2IO2 - N/A */ -0 ,/* MIXED2IO3 - N/A */ -0 ,/* MIXED2IO4 - N/A */ -0 ,/* MIXED2IO5 - N/A */ -0 ,/* MIXED2IO6 - N/A */ -0 ,/* MIXED2IO7 - N/A */ +3 ,/* EMACIO0 */ +3 ,/* EMACIO1 */ +3 ,/* EMACIO2 */ +3 ,/* EMACIO3 */ +3 ,/* EMACIO4 */ +3 ,/* EMACIO5 */ +3 ,/* EMACIO6 */ +3 ,/* EMACIO7 */ +3 ,/* EMACIO8 */ +3 ,/* EMACIO9 */ +3 ,/* EMACIO10 */ +3 ,/* EMACIO11 */ +3 ,/* EMACIO12 */ +3 ,/* EMACIO13 */ +0 ,/* EMACIO14 */ +0 ,/* EMACIO15 */ +0 ,/* EMACIO16 */ +0 ,/* EMACIO17 */ +0 ,/* EMACIO18 */ +0 ,/* EMACIO19 */ +3 ,/* FLASHIO0 */ +0 ,/* FLASHIO1 */ +3 ,/* FLASHIO2 */ +3 ,/* FLASHIO3 */ +3 ,/* FLASHIO4 */ +3 ,/* FLASHIO5 */ +3 ,/* FLASHIO6 */ +3 ,/* FLASHIO7 */ +0 ,/* FLASHIO8 */ +3 ,/* FLASHIO9 */ +3 ,/* FLASHIO10 */ +3 ,/* FLASHIO11 */ +0 ,/* GENERALIO0 */ +1 ,/* GENERALIO1 */ +1 ,/* GENERALIO2 */ +0 ,/* GENERALIO3 */ +0 ,/* GENERALIO4 */ +1 ,/* GENERALIO5 */ +1 ,/* GENERALIO6 */ +1 ,/* GENERALIO7 */ +1 ,/* GENERALIO8 */ +0 ,/* GENERALIO9 */ +0 ,/* GENERALIO10 */ +0 ,/* GENERALIO11 */ +0 ,/* GENERALIO12 */ +2 ,/* GENERALIO13 */ +2 ,/* GENERALIO14 */ +0 ,/* GENERALIO15 */ +0 ,/* GENERALIO16 */ +0 ,/* GENERALIO17 */ +0 ,/* GENERALIO18 */ +0 ,/* GENERALIO19 */ +0 ,/* GENERALIO20 */ +0 ,/* GENERALIO21 */ +0 ,/* GENERALIO22 */ +0 ,/* GENERALIO23 */ +0 ,/* GENERALIO24 */ +0 ,/* GENERALIO25 */ +0 ,/* GENERALIO26 */ +0 ,/* GENERALIO27 */ +0 ,/* GENERALIO28 */ +0 ,/* GENERALIO29 */ +0 ,/* GENERALIO30 */ +0 ,/* GENERALIO31 */ +0 ,/* MIXED1IO0 */ +1 ,/* MIXED1IO1 */ +1 ,/* MIXED1IO2 */ +1 ,/* MIXED1IO3 */ +1 ,/* MIXED1IO4 */ +0 ,/* MIXED1IO5 */ +0 ,/* MIXED1IO6 */ +0 ,/* MIXED1IO7 */ +1 ,/* MIXED1IO8 */ +1 ,/* MIXED1IO9 */ +1 ,/* MIXED1IO10 */ +1 ,/* MIXED1IO11 */ +0 ,/* MIXED1IO12 */ +0 ,/* MIXED1IO13 */ +0 ,/* MIXED1IO14 */ +1 ,/* MIXED1IO15 */ +1 ,/* MIXED1IO16 */ +1 ,/* MIXED1IO17 */ +1 ,/* MIXED1IO18 */ +0 ,/* MIXED1IO19 */ +0 ,/* MIXED1IO20 */ +0 ,/* MIXED1IO21 */ +0 ,/* MIXED2IO0 */ +0 ,/* MIXED2IO1 */ +0 ,/* MIXED2IO2 */ +0 ,/* MIXED2IO3 */ +0 ,/* MIXED2IO4 */ +0 ,/* MIXED2IO5 */ +0 ,/* MIXED2IO6 */ +0 ,/* MIXED2IO7 */ 0 ,/* GPLINMUX48 */ 0 ,/* GPLINMUX49 */ 0 ,/* GPLINMUX50 */
board/altera/socfpga/pinmux_config.h +7 -7
@@ -7,21 +7,21 @@* State of enabling for which IP connected out through the muxing. * Value 1 mean the IP connection is muxed out */ -#define CONFIG_HPS_EMAC0 (0) -#define CONFIG_HPS_EMAC1 (1) +#define CONFIG_HPS_EMAC0 (1) +#define CONFIG_HPS_EMAC1 (0)#define CONFIG_HPS_USB0 (0)#define CONFIG_HPS_USB1 (1)#define CONFIG_HPS_NAND (0)#define CONFIG_HPS_SDMMC (1) -#define CONFIG_HPS_QSPI (1) +#define CONFIG_HPS_QSPI (0)#define CONFIG_HPS_UART0 (1)#define CONFIG_HPS_UART1 (0) -#define CONFIG_HPS_TRACE (1) +#define CONFIG_HPS_TRACE (0)#define CONFIG_HPS_I2C0 (1)#define CONFIG_HPS_I2C1 (0)#define CONFIG_HPS_I2C2 (0)#define CONFIG_HPS_I2C3 (0) -#define CONFIG_HPS_SPIM0 (1) +#define CONFIG_HPS_SPIM0 (0)#define CONFIG_HPS_SPIM1 (0)#define CONFIG_HPS_SPIS0 (0)#define CONFIG_HPS_SPIS1 (0)
@@ -29,10 +29,10 @@#define CONFIG_HPS_CAN1 (0)/* IP attribute value (which affected by pin muxing configuration) */ -#define CONFIG_HPS_SDMMC_BUSWIDTH (4) +#define CONFIG_HPS_SDMMC_BUSWIDTH (8)/* 1 if the pins are connected out */ -#define CONFIG_HPS_QSPI_CS0 (1) +#define CONFIG_HPS_QSPI_CS0 (0)#define CONFIG_HPS_QSPI_CS1 (0)#define CONFIG_HPS_QSPI_CS2 (0)#define CONFIG_HPS_QSPI_CS3 (0)
Signature · 1 line
2.1.3
PATCH 3/10 arm: socfpga: Sync Cyclone V DK PLL configuration
In reply to Marek VasutSync SoCFPGA Cyclone V development kit pinmux configuration with Rocketboard U-Boot v2013.01.01-114-g9381569 (ACDS14.1_REL_GSRD_PR).
NOTE: This change is useless until we get proper SPL support, at
which point this will likely need further rework.
--- board/altera/socfpga/pll_config.h | 34 +++++++++++----------------------- 1 file changed, 11 insertions(+), 23 deletions(-)
board/altera/socfpga/pll_config.h +11 -23
@@ -16,9 +16,9 @@#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT (0)#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT (0)#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT (0) -#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT (3) -#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT (3) -#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT (12) +#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT (511) +#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT (511) +#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT (15)#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK (1)#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK (1)#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK (1)
@@ -36,7 +36,7 @@/* Peripheral PLL */ #define CONFIG_HPS_PERPLLGRP_VCO_DENOM (1) -#define CONFIG_HPS_PERPLLGRP_VCO_NUMER (79) +#define CONFIG_HPS_PERPLLGRP_VCO_NUMER (39)/* * To tell where is the VCOs source: * 0 = EOSC1
@@ -45,13 +45,13 @@*/ #define CONFIG_HPS_PERPLLGRP_VCO_PSRC (0)#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT (3) -#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT (3) -#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT (1) +#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT (511) +#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT (511)#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT (4)#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT (4) -#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT (9) +#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT (511)#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK (0) -#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK (0) +#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK (4)#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK (1)#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK (1)#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK (6249)
@@ -66,15 +66,8 @@#define CONFIG_HPS_PERPLLGRP_SRC_QSPI (1)/* SDRAM PLL */ -#ifdef CONFIG_SOCFPGA_ARRIA5 -/* Arria V SDRAM will run at 533MHz while Cyclone V still at 400MHz -* This if..else... is not required if generated by tools */ #define CONFIG_HPS_SDRPLLGRP_VCO_DENOM (2) -#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (127) -#else -#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM (0) -#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (31) -#endif /* CONFIG_SOCFPGA_ARRIA5 */ +#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (79)/* * To tell where is the VCOs source:
@@ -94,17 +87,12 @@/* Info for driver */ #define CONFIG_HPS_CLK_OSC1_HZ (25000000) -#define CONFIG_HPS_CLK_OSC2_HZ 0 +#define CONFIG_HPS_CLK_OSC2_HZ (25000000)#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ 0#define CONFIG_HPS_CLK_F2S_PER_REF_HZ 0#define CONFIG_HPS_CLK_MAINVCO_HZ (1600000000)#define CONFIG_HPS_CLK_PERVCO_HZ (1000000000) -#ifdef CONFIG_SOCFPGA_ARRIA5 -/* The if..else... is not required if generated by tools */ -#define CONFIG_HPS_CLK_SDRVCO_HZ (1066000000) -#else -#define CONFIG_HPS_CLK_SDRVCO_HZ (800000000) -#endif +#define CONFIG_HPS_CLK_SDRVCO_HZ (666666666)#define CONFIG_HPS_CLK_EMAC0_HZ (250000000)#define CONFIG_HPS_CLK_EMAC1_HZ (250000000)#define CONFIG_HPS_CLK_USBCLK_HZ (200000000)
Signature · 1 line
2.1.3
PATCH 4/10 arm: socfpga: Add USB and UDC support for Cyclone V DK
In reply to Marek VasutAdd support for USB host mode and USB device mode for the Cyclone V development kit and enable support for UMS (to export SD card as USB mass storage). The UMS is activated via 'ums 0 mmc 0' command, the system must be connected to a host PC via HPS USB port and SD card must be installed for this to work.
--- include/configs/socfpga_cyclone5.h | 9 +++++++++ 1 file changed, 9 insertions(+)
include/configs/socfpga_cyclone5.h +9 -0
@@ -21,6 +21,7 @@#define CONFIG_CMD_ASKENV #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_CACHE +#define CONFIG_CMD_DFU #define CONFIG_CMD_DHCP #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE
@@ -33,6 +34,8 @@#define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_USB +#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_REGEX /* Enable regular expression support */
@@ -66,6 +69,12 @@#endif +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS +#endif +#define CONFIG_G_DNL_MANUFACTURER "Altera" +/* Extra Environment */ #define CONFIG_HOSTNAME socfpga_cyclone5
Signature · 1 line
2.1.3
PATCH 5/10 arm: socfpga: Drop cyclone5 suffix from board file name
In reply to Marek VasutDrop the _cyclone5 suffix from socfpga_cyclone5.c since this file will contain Arria 5 support as well.
--- board/altera/socfpga/Makefile | 2 +- board/altera/socfpga/socfpga.c | 100 ++++++++++++++++++++++++++++++++ board/altera/socfpga/socfpga_cyclone5.c | 100 -------------------------------- 3 files changed, 101 insertions(+), 101 deletions(-) create mode 100644 board/altera/socfpga/socfpga.c delete mode 100644 board/altera/socfpga/socfpga_cyclone5.c
board/altera/socfpga/Makefile +1 -1
@@ -6,5 +6,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y := socfpga_cyclone5.o +obj-y := socfpga.o obj-$(CONFIG_SPL_BUILD) += pinmux_config.o iocsr_config.o
board/altera/socfpga/socfpga.c new file +100 -0
100 lines not on this page · raw message
board/altera/socfpga/socfpga_cyclone5.c deleted +0 -100
100 lines not on this page · raw message
Signature · 1 line
2.1.3
PATCH v2 6/10 arm: socfpga: Zap checkboard()
In reply to Marek VasutSince all boards now have a DT, instead of hard-coding the board name into the U-Boot binary, read the board name from DT "model" property.
--- board/altera/socfpga/socfpga.c | 9 --------- include/configs/socfpga_common.h | 2 +- 2 files changed, 1 insertion(+), 10 deletions(-)
V2: Place this patch at this point in the series, so the subsequent patches
don't have to tweak checkboard to support distinction between Arria V and Cyclone V.
board/altera/socfpga/socfpga.c +0 -9
@@ -19,15 +19,6 @@DECLARE_GLOBAL_DATA_PTR ;/* -* Print Board information -*/ -int checkboard (void ) -{ -puts ("BOARD: Altera SoCFPGA Cyclone5 Board\n" ); -return 0 ; -} - -/* * Initialization function which happen at early stage of c code */ int board_early_init_f (void )
include/configs/socfpga_common.h +1 -1
@@ -19,7 +19,7 @@* High level configuration */ #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_DISPLAY_BOARDINFO_LATE #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_SYS_NO_FLASH
Signature · 1 line
2.1.3
PATCH v2 6/10 arm: socfpga: Zap checkboard()
Quoted 10 lines · Marek Vasut
Since all boards now have a DT, instead of hard-coding the board name into the U-Boot binary, read the board name from DT "model" property.
Signed-off-by Marek Vasut <[email protected]>Cc Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Stefan Roese <[email protected]>Cc Vince Bridgers <[email protected]>
Thanks,
Stefan
PATCH v2 6/10 arm: socfpga: Zap checkboard()
In reply to Marek VasutQuoted 7 lines · Marek Vasut
Since all boards now have a DT, instead of hard-coding the board name into the U-Boot binary, read the board name from DT "model" property.
Signed-off-by Marek Vasut <[email protected]>Cc Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
PATCH v2 6/10 arm: socfpga: Zap checkboard()
Quoted 10 lines · Pavel Machek
Quoted 7 lines · Marek Vasut
Since all boards now have a DT, instead of hard-coding the board name into the U-Boot binary, read the board name from DT "model" property.
Signed-off-by Marek Vasut <[email protected]>Cc Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Acked-by Pavel Machek <[email protected]>
Thanks
Best regards,
Marek Vasut
PATCH 7/10 arm: socfpga: Zap board_early_init_f()
In reply to Marek VasutZap this unused empty function, no point in having it.
--- board/altera/socfpga/socfpga.c | 8 -------- include/configs/socfpga_common.h | 1 - 2 files changed, 9 deletions(-)
board/altera/socfpga/socfpga.c +0 -8
@@ -19,14 +19,6 @@DECLARE_GLOBAL_DATA_PTR ;/* -* Initialization function which happen at early stage of c code -*/ -int board_early_init_f (void ) -{ -return 0 ; -} - -/* * Miscellaneous platform dependent initialisations */ int board_init (void )
include/configs/socfpga_common.h +0 -1
@@ -20,7 +20,6 @@*/ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO_LATE -#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_SYS_NO_FLASH #define CONFIG_CLOCKS
Signature · 1 line
2.1.3
PATCH v2 8/10 arm: socfpga: Add Altera Arria V DK support
In reply to Marek VasutAdd support for the Altera Arria V development kit.
--- arch/arm/Kconfig | 5 + board/altera/socfpga/Kconfig | 16 + board/altera/socfpga/iocsr_config.c | 688 +++++++++++++++++++++++++++++++++++ board/altera/socfpga/iocsr_config.h | 9 + board/altera/socfpga/pinmux_config.c | 215 +++++++++++ configs/socfpga_arria5_defconfig | 3 + include/configs/socfpga_arria5.h | 107 ++++++ 7 files changed, 1043 insertions(+) create mode 100644 configs/socfpga_arria5_defconfig create mode 100644 include/configs/socfpga_arria5.h
V2: Don't tweak checkboard(), since this function is now missing.
arch/arm/Kconfig +5 -0
@@ -687,6 +687,11 @@ config TARGET_CM_FX6 select CPU_V7 select SUPPORT_SPL +config TARGET_SOCFPGA_ARRIA5 + bool "Support socfpga_arria5" + select CPU_V7 + select SUPPORT_SPL + config TARGET_SOCFPGA_CYCLONE5 bool "Support socfpga_cyclone5" select CPU_V7
board/altera/socfpga/Kconfig +16 -0
@@ -13,3 +13,19 @@ config SYS_CONFIG_NAME default "socfpga_cyclone5" endif + +if TARGET_SOCFPGA_ARRIA5 + +config SYS_BOARD + default "socfpga" + +config SYS_VENDOR + default "altera" + +config SYS_SOC + default "socfpga" + +config SYS_CONFIG_NAME + default "socfpga_arria5" + +endif
board/altera/socfpga/iocsr_config.c +688 -0
697 lines not on this page · raw message
board/altera/socfpga/iocsr_config.h +9 -0
@@ -9,9 +9,18 @@#ifndef _PRELOADER_IOCSR_CONFIG_H_#define _PRELOADER_IOCSR_CONFIG_H_ +#ifdef CONFIG_TARGET_SOCFPGA_CYCLONE5 #define CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH (764)#define CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH (1719)#define CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH (955)#define CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH (16766) +#endif + +#ifdef CONFIG_TARGET_SOCFPGA_ARRIA5 +#define CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH (1337) +#define CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH (1719) +#define CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH (1528) +#define CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH (16766) +#endif #endif /*_PRELOADER_IOCSR_CONFIG_H_*/
board/altera/socfpga/pinmux_config.c +215 -0
224 lines not on this page · raw message
configs/socfpga_arria5_defconfig new file +3 -0
@@ -0,0 +1,3 @@ +CONFIG_SPL=y ++S:CONFIG_ARM=y ++S:CONFIG_TARGET_SOCFPGA_ARRIA5=y
include/configs/socfpga_arria5.h new file +107 -0
107 lines not on this page · raw message
Signature · 1 line
2.1.3
PATCH v2 8/10 arm: socfpga: Add Altera Arria V DK support
Quoted 19 lines · Marek Vasut
Add support for the Altera Arria V development kit.
Signed-off-by Marek Vasut <[email protected]>Cc Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Stefan Roese <[email protected]>Cc Vince Bridgers <[email protected]>--- arch/arm/Kconfig | 5 + board/altera/socfpga/Kconfig | 16 + board/altera/socfpga/iocsr_config.c | 688 +++++++++++++++++++++++++++++++++++ board/altera/socfpga/iocsr_config.h | 9 + board/altera/socfpga/pinmux_config.c | 215 +++++++++++ configs/socfpga_arria5_defconfig | 3 + include/configs/socfpga_arria5.h | 107 ++++++ 7 files changed, 1043 insertions(+)create mode 100644 configs/socfpga_arria5_defconfig create mode 100644
include/configs/socfpga_arria5.h
<snip>
Quoted 103 lines
include/configs/socfpga_arria5.h new file +97
-0@@ -0,0 +1,107 @@ +/* +* Copyright (C) 2014 Marek Vasut <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ +#ifndef __CONFIG_SOCFPGA_ARRIA5_H__ +#define __CONFIG_SOCFPGA_ARRIA5_H__ + +#include <asm/arch/socfpga_base_addrs.h> +#include "../../board/altera/socfpga/pinmux_config.h" +#include "../../board/altera/socfpga/iocsr_config.h" +#include "../../board/altera/socfpga/pll_config.h" + +/* U-Boot Commands */ +#define CONFIG_SYS_NO_FLASH +#include <config_cmd_default.h> +#define CONFIG_DOS_PARTITION +#define CONFIG_FAT_WRITE +#define CONFIG_HW_WATCHDOG + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DFU +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FPGA +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_USB +#define CONFIG_CMD_USB_MASS_STORAGE + +#define CONFIG_REGEX /* Enable regular expression support */ + +/* Memory configurations */ +#define PHYS_SDRAM_1_SIZE 0x40000000/* 1GiB on SoCDK */ + +/* Booting Linux */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "zImage" +#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) +#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET +#define CONFIG_BOOTCOMMAND "run ramboot" +#else +#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" +#endif +#define CONFIG_LOADADDR 0x8000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* Ethernet on SoC (EMAC) */ +#if defined(CONFIG_CMD_NET ) +#define CONFIG_EMAC_BASE SOCFPGA_EMAC1_ADDRESS +#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII + +/* PHY */ +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 +#define CONFIG_KSZ9021_CLK_SKEW_ENV "micrel-ksz9021-clk-skew" +#define CONFIG_KSZ9021_CLK_SKEW_VAL 0xf0f0 +#define CONFIG_KSZ9021_DATA_SKEW_ENV "micrel-ksz9021-data-skew" +#define CONFIG_KSZ9021_DATA_SKEW_VAL 0x0 + +#endif + +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS +#endif +#define CONFIG_G_DNL_MANUFACTURER "Altera" + +/* Extra Environment */ +#define CONFIG_HOSTNAME socfpga_arria5 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=n\0" \ + "loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ + "bootm ${loadaddr} - ${fdt_addr}\0" \ + "bootimage=zImage\0" \ + "fdt_addr=100\0" \ + "fdtimage=socfpga.dtb\0" \ + "fsloadcmd=ext2load\0" \ + "bootm ${loadaddr} - ${fdt_addr}\0" \ + "mmcroot=/dev/mmcblk0p2\0" \ + "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ + " root=${mmcroot} rw rootwait;" \ + "bootz ${loadaddr} - ${fdt_addr}\0" \ + "mmcload=mmc rescan;" \ + "load mmc 0:1 ${loadaddr} ${bootimage};" \ + "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
include/configs/socfpga_arria5.h line 107
Quoted 10 lines
include/configs/socfpga_arria5.h new file +10
-0+"qspiroot=/dev/mtdblock0\0" \ +"qspirootfstype=jffs2\0" \ +"qspiboot=setenv bootargs " CONFIG_BOOTARGS \ +" root=${qspiroot} rw rootfstype=${qspirootfstype};" \ +"bootm ${loadaddr} - ${fdt_addr}\0" + +/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +#endif /* __CONFIG_SOCFPGA_ARRIA5_H__ */
Without really diff'ing this file with socfpga_cyclone5.h, I'm pretty sure that they share many lines. Wouldn't it make sense to move those common defines / configs to a common file instead (socfpga_common.h)?
Thanks,
Stefan
PATCH v2 8/10 arm: socfpga: Add Altera Arria V DK support
Quoted 10 lines · Stefan Roese
Quoted 9 lines · Marek Vasut
Add support for the Altera Arria V development kit.
Signed-off-by Marek Vasut <[email protected]>Cc Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Stefan Roese <[email protected]>Cc Vince Bridgers <[email protected]>---
[...]
Quoted 8 lines
include/configs/socfpga_arria5.h line 107
Quoted 4 lines
include/configs/socfpga_arria5.h new file +4
-0+/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +#endif /* __CONFIG_SOCFPGA_ARRIA5_H__ */ Without really diff'ing this file with
socfpga_cyclone5.h, I'm pretty sure that they share many lines. Wouldn't it make sense to move those common defines / configs to a common file instead (socfpga_common.h)?
Hi!
I agree they share a lot, but I would not recommend moving any of this into socfpga_common.h . Not all boards which include socfpga_common.h will want all that's common between socfpga_cyclone5.h and socfpga_arria5.h as well.
We need to switch to DM really soon, since without DM, we cannot really make any "common" configuration. The socfpga_cyclone5.h file in fact represents a configuration for SoCDK with Cyclone 5, same for Arria 5.
Unless you have any suggestion, I'd just apply this stuff as is for now with the note that these config files must be cleaned up once DM is in place. Or do you have any suggestions please ?
Best regards,
Marek Vasut
PATCH v2 8/10 arm: socfpga: Add Altera Arria V DK support
Quoted 30 lines · Marek Vasut
Quoted 10 lines · Stefan Roese
Quoted 9 lines · Marek Vasut
Add support for the Altera Arria V development kit.
Signed-off-by Marek Vasut <[email protected]>Cc Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Stefan Roese <[email protected]>Cc Vince Bridgers <[email protected]>---
[...]
Quoted 8 lines
include/configs/socfpga_arria5.h line 107
Quoted 4 lines
include/configs/socfpga_arria5.h new file +4
-0+/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +#endif /* __CONFIG_SOCFPGA_ARRIA5_H__ */ Without really diff'ing this file with
socfpga_cyclone5.h, I'm pretty sure that they share many lines. Wouldn't it make sense to move those common defines / configs to a common file instead (socfpga_common.h)?Hi!
I agree they share a lot, but I would not recommend moving any of this into
socfpga_common.h. Not all boards which includesocfpga_common.hwill want all that's common betweensocfpga_cyclone5.handsocfpga_arria5.has well.
Quoted 7 lines
We need to switch to DM really soon, since without DM, we cannot really make any "common" configuration. The
socfpga_cyclone5.hfile in fact represents a configuration for SoCDK with Cyclone 5, same for Arria 5.Unless you have any suggestion, I'd just apply this stuff as is for now with the note that these config files must be cleaned up once DM is in place. Or do you have any suggestions please ?
No. Please go ahead with this series. We can merge stuff later as well. Once we have better view on how this multi-board support for SoCFPGA will really end up.
Thanks,
Stefan
PATCH v2 8/10 arm: socfpga: Add Altera Arria V DK support
Quoted 35 lines · Stefan Roese
Quoted 34 lines · Marek Vasut
Quoted 10 lines · Stefan Roese
Quoted 9 lines · Marek Vasut
Add support for the Altera Arria V development kit.
Signed-off-by Marek Vasut <[email protected]>Cc Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Stefan Roese <[email protected]>Cc Vince Bridgers <[email protected]>---
[...]
Quoted 8 lines
include/configs/socfpga_arria5.h line 107
Quoted 4 lines
include/configs/socfpga_arria5.h new file +4
-0+/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +#endif /* __CONFIG_SOCFPGA_ARRIA5_H__ */ Without really diff'ing this file with
socfpga_cyclone5.h, I'm pretty sure that they share many lines. Wouldn't it make sense to move those common defines / configs to a common file instead (socfpga_common.h)?Hi!
I agree they share a lot, but I would not recommend moving any of this into
socfpga_common.h. Not all boards which includesocfpga_common.hwill want all that's common betweensocfpga_cyclone5.handsocfpga_arria5.has well.We need to switch to DM really soon, since without DM, we cannot really make any "common" configuration. The
socfpga_cyclone5.hfile in fact represents a configuration for SoCDK with Cyclone 5, same for Arria 5.
Quoted 7 lines
Quoted 3 lines
Unless you have any suggestion, I'd just apply this stuff as is for now with the note that these config files must be cleaned up once DM is in place. Or do you have any suggestions please ?
No. Please go ahead with this series. We can merge stuff later as well. Once we have better view on how this multi-board support for SoCFPGA will really end up.
Yeah, I'm kinda tempted to merge it as-is, but I wanted to collect more feedback, since this was a discussed change. Thanks!
Best regards,
Marek Vasut
PATCH v2 8/10 arm: socfpga: Add Altera Arria V DK support
In reply to Marek VasutQuoted 30 lines · Marek Vasut
Quoted 10 lines · Stefan Roese
Quoted 9 lines · Marek Vasut
Add support for the Altera Arria V development kit.
Signed-off-by Marek Vasut <[email protected]>Cc Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Stefan Roese <[email protected]>Cc Vince Bridgers <[email protected]>---
[...]
Quoted 8 lines
include/configs/socfpga_arria5.h line 107
Quoted 4 lines
include/configs/socfpga_arria5.h new file +4
-0+/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +#endif /* __CONFIG_SOCFPGA_ARRIA5_H__ */ Without really diff'ing this file with
socfpga_cyclone5.h, I'm pretty sure that they share many lines. Wouldn't it make sense to move those common defines / configs to a common file instead (socfpga_common.h)?Hi!
I agree they share a lot, but I would not recommend moving any of this into
socfpga_common.h. Not all boards which includesocfpga_common.hwill want all that's common betweensocfpga_cyclone5.handsocfpga_arria5.has well.
Quoted 7 lines
We need to switch to DM really soon, since without DM, we cannot really make any "common" configuration. The
socfpga_cyclone5.hfile in fact represents a configuration for SoCDK with Cyclone 5, same for Arria 5.Unless you have any suggestion, I'd just apply this stuff as is for now with the note that these config files must be cleaned up once DM is in place. Or do you have any suggestions please ?
Could we simply have socfpga_common_5.h which stuff that is shared between cyclone and arrira?
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
PATCH v2 8/10 arm: socfpga: Add Altera Arria V DK support
Quoted 35 lines · Pavel Machek
Quoted 34 lines · Marek Vasut
Quoted 10 lines · Stefan Roese
Quoted 9 lines · Marek Vasut
Add support for the Altera Arria V development kit.
Signed-off-by Marek Vasut <[email protected]>Cc Chin Liang See <[email protected]>Cc Dinh Nguyen <[email protected]>Cc Pavel Machek <[email protected]>Cc Stefan Roese <[email protected]>Cc Vince Bridgers <[email protected]>---
[...]
Quoted 8 lines
include/configs/socfpga_arria5.h line 107
Quoted 4 lines
include/configs/socfpga_arria5.h new file +4
-0+/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +#endif /* __CONFIG_SOCFPGA_ARRIA5_H__ */ Without really diff'ing this file with
socfpga_cyclone5.h, I'm pretty sure that they share many lines. Wouldn't it make sense to move those common defines / configs to a common file instead (socfpga_common.h)?Hi!
I agree they share a lot, but I would not recommend moving any of this into
socfpga_common.h. Not all boards which includesocfpga_common.hwill want all that's common betweensocfpga_cyclone5.handsocfpga_arria5.has well.We need to switch to DM really soon, since without DM, we cannot really make any "common" configuration. The
socfpga_cyclone5.hfile in fact represents a configuration for SoCDK with Cyclone 5, same for Arria 5.
Quoted 6 lines
Quoted 3 lines
Unless you have any suggestion, I'd just apply this stuff as is for now with the note that these config files must be cleaned up once DM is in place. Or do you have any suggestions please ?
Could we simply have
socfpga_common_5.hwhich stuff that is shared between cyclone and arrira?
Hi!
I think we can improve this later. In the end, the structure should be either the way DTs are structured in kernel OR we should have just one single config for all SoCFPGA boards. The later is of course preferred.
For now, I'm tempted to apply this as-is so we at least have the groundwork in place and can move on from that. What do you say ?
Best regards,
Marek Vasut
PATCH v2 8/10 arm: socfpga: Add Altera Arria V DK support
Quoted 8 lines
Hi!
I think we can improve this later. In the end, the structure should be either the way DTs are structured in kernel OR we should have just one single config for all SoCFPGA boards. The later is of course preferred.
For now, I'm tempted to apply this as-is so we at least have the groundwork in place and can move on from that. What do you say ?
We spent enough time arguing, just go ahead.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
PATCH v2 8/10 arm: socfpga: Add Altera Arria V DK support
Quoted 10 lines · Pavel Machek
Quoted 8 lines
Hi!
I think we can improve this later. In the end, the structure should be either the way DTs are structured in kernel OR we should have just one single config for all SoCFPGA boards. The later is of course preferred.
For now, I'm tempted to apply this as-is so we at least have the groundwork in place and can move on from that. What do you say ?
We spent enough time arguing, just go ahead.
Roger that !
Best regards,
Marek Vasut
PATCH 9/10 dt: socfpga: Import and enable Cyclone V DK DTS
In reply to Marek VasutImport DTS for Cyclone V development kit and enable support for DT. The DT is imported from Linux 3.19-rc1 as of commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672 .
--- arch/arm/dts/Makefile | 4 +- arch/arm/dts/socfpga_cyclone5_socdk.dts | 79 +++++++++++++++++++++++++++++++++ configs/socfpga_cyclone5_defconfig | 2 + 3 files changed, 84 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/socfpga_cyclone5_socdk.dts
arch/arm/dts/Makefile +3 -1
@@ -49,7 +49,9 @@ dtb-$(CONFIG_ZYNQ) += zynq-zc702.dtb \ zynq-zc770-xm013.dtb dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb -dtb-$(CONFIG_SOCFPGA) += socfpga_cyclone5_socrates.dtb +dtb-$(CONFIG_SOCFPGA) += \ + socfpga_cyclone5_socdk.dtb \ + socfpga_cyclone5_socrates.dtb targets += $(dtb-y)
arch/arm/dts/socfpga_cyclone5_socdk.dts new file +79 -0
79 lines not on this page · raw message
configs/socfpga_cyclone5_defconfig +2 -0
@@ -1,3 +1,5 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_TARGET_SOCFPGA_CYCLONE5=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socdk"
Signature · 1 line
2.1.3
PATCH 10/10 dt: socfpga: Import and enable Arria V DK DTS
In reply to Marek VasutImport DTS for Arria V development kit and enable support for DT. The DT is imported from Linux 3.19-rc1 as of commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672 .
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/socfpga_arria5.dtsi | 34 ++++++++++++++++ arch/arm/dts/socfpga_arria5_socdk.dts | 74 +++++++++++++++++++++++++++++++++++ configs/socfpga_arria5_defconfig | 2 + 4 files changed, 111 insertions(+) create mode 100644 arch/arm/dts/socfpga_arria5.dtsi create mode 100644 arch/arm/dts/socfpga_arria5_socdk.dts
arch/arm/dts/Makefile +1 -0
@@ -50,6 +50,7 @@ dtb-$(CONFIG_ZYNQ) += zynq-zc702.dtb \ dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb dtb-$(CONFIG_SOCFPGA) += \ + socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_socrates.dtb
arch/arm/dts/socfpga_arria5.dtsi new file +34 -0
@@ -0,0 +1,34 @@ +/* + * Copyright (C) 2013 Altera Corporation <www.altera.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/* First 4KB has trampoline code for secondary cores. */ +/memreserve/ 0x00000000 0x0001000; +#include "socfpga.dtsi" + +/ { + soc { + clkmgr at ffd04000 { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; + + mmc0: dwmmc0 at ff704000 { + num-slots = <1>; + broken-cd; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + }; + + sysmgr at ffd08000 { + cpu1-start-addr = <0xffd080c4>; + }; + }; +};
arch/arm/dts/socfpga_arria5_socdk.dts new file +74 -0
74 lines not on this page · raw message
configs/socfpga_arria5_defconfig +2 -0
@@ -1,3 +1,5 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_TARGET_SOCFPGA_ARRIA5=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_socdk"
Signature · 1 line
2.1.3