Skip to contentSkip to conversation

(xen) for-jens-3.20 for v3.20 Xen blk driver updates

GIT PULL Roger Pau Monné 3 participants 7 messages Feb 10, 2015

lore
Share & tools
lore
#0 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello Jens,

There are 3 fixes for Xen blk drivers. One adds myself as a maintainer (together with Konrad). There's also one to improve compatibility with older xen-blkfront versions that did not specify a protocol version. The remaining one is a fix for blkfront to correctly account the number of requests on the queue when resuming from suspension.

Thanks, Roger.

The following changes since commit
e36f014edff70fc02b3d3d79cead1d58f289332e:

Linux 3.19-rc7 (2015-02-01 20:07:21 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git for-jens-3.20

for you to fetch changes up to d69dbb6ca88c41698dd1cba84926926bdf789f7e:

xen-blkback: default to X86_32 ABI on x86 (2015-02-10 10:23:18 +0000)

- ---------------------------------------------------------------- David Vrabel (1):
xen-blkback: default to X86_32 ABI on x86

Roger Pau Monne (2):
xen-blkback,xen-blkfront: add myself as maintainer
xen-blkfront: fix accounting of reqs when migrating

 MAINTAINERS                        | 1 +
 drivers/block/xen-blkback/common.h | 9 +++++++++
 drivers/block/xen-blkback/xenbus.c | 4 ++--
 drivers/block/xen-blkfront.c       | 4 ++--
 4 files changed, 14 insertions(+), 4 deletions(-)

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1

iQEcBAEBAgAGBQJU2gCDAAoJEKXZdqUyumTA0FoH/0QGrP26AyHCMF0U79ZpHaZM q1cFOU+Rn++e0tGc7tvSVELuTd3Rpxo4RTMpVqcBc2USbzdptKxgsobdlQXM6ySD R3rKIqt00Ugg1jBBeV3/+kb7M/tku5C0BFFJNDYL7TRd+9wbodsEDGhSgQh1X3XU 3S6miVQ6RGhBti0WJhpg6TeJC8Km8fkIVW7+6RL5cHB4hmFfIGxWHX9WPjPchjqd xP1EOs+qt8YGKrftLB1VCVGXMoXfv47/JVB/pb55c2VtRuEA3cBPlSe/+Q+8Ntc9 ZJjyHHm9cNvGToRxBLok1vyOb/gsmAigJ1463BqJ5oSgEBZhGcZ4ovF2gwr9EC0= =oUXg
-----END PGP SIGNATURE-----

#1 lore raw
Quoted 13 lines · Roger Pau Monné

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello Jens,

There are 3 fixes for Xen blk drivers. One adds myself as a maintainer (together with Konrad). There's also one to improve compatibility with older xen-blkfront versions that did not specify a protocol version. The remaining one is a fix for blkfront to correctly account the number of requests on the queue when resuming from suspension.

Thanks, Roger.

Quoted 8 lines

The following changes since commit
e36f014edff70fc02b3d3d79cead1d58f289332e:

   Linux 3.19-rc7 (2015-02-01 20:07:21 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git for-jens-3.20

This is based on 3.19-rc7, which means that when I pulled it into for-3.20/drivers, I get a ton of unrelated commits as well. That's no good. The pull request should be based on for-3.20/drivers or earlier. So please rebase the three patches on top of for-3.20/drivers. Konrad does the right thing here. Not sure if you are going to be sending pull requests going forward (or both of you), but it might not hurt to sync up with Konrad and ensure you guys are on the same page.

Secondly, this is a bit late. But since it's just two fixes (not features) and a maintainer update, it's not a huge deal. It's a bit annoying though since every pull request like this will push my pull request by a day or two, so generally I prefer to have pull requests at least the week before the merge window opens.

Signature · 7 lines
Jens Axboe


_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel
#2 lore raw
In reply to Roger Pau Monné
Quoted 13 lines · Roger Pau Monné

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello Jens,

There are 3 fixes for Xen blk drivers. One adds myself as a maintainer (together with Konrad). There's also one to improve compatibility with older xen-blkfront versions that did not specify a protocol version. The remaining one is a fix for blkfront to correctly account the number of requests on the queue when resuming from suspension.

Thanks, Roger.

Quoted 8 lines

The following changes since commit
e36f014edff70fc02b3d3d79cead1d58f289332e:

   Linux 3.19-rc7 (2015-02-01 20:07:21 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git for-jens-3.20

This is based on 3.19-rc7, which means that when I pulled it into for-3.20/drivers, I get a ton of unrelated commits as well. That's no good. The pull request should be based on for-3.20/drivers or earlier. So please rebase the three patches on top of for-3.20/drivers. Konrad does the right thing here. Not sure if you are going to be sending pull requests going forward (or both of you), but it might not hurt to sync up with Konrad and ensure you guys are on the same page.

Secondly, this is a bit late. But since it's just two fixes (not features) and a maintainer update, it's not a huge deal. It's a bit annoying though since every pull request like this will push my pull request by a day or two, so generally I prefer to have pull requests at least the week before the merge window opens.

Signature · 1 line
Jens Axboe
#3 lore raw
Quoted 17 lines · Jens Axboe
Quoted 16 lines · Roger Pau Monné

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello Jens,

There are 3 fixes for Xen blk drivers. One adds myself as a maintainer (together with Konrad). There's also one to improve compatibility with older xen-blkfront versions that did not specify a protocol version. The remaining one is a fix for blkfront to correctly account the number of requests on the queue when resuming from suspension.

Thanks, Roger.

The following changes since commit
e36f014edff70fc02b3d3d79cead1d58f289332e:

Quoted 8 lines
Quoted 5 lines
   Linux 3.19-rc7 (2015-02-01 20:07:21 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git for-jens-3.20

This is based on 3.19-rc7, which means that when I pulled it into for-3.20/drivers, I get a ton of unrelated commits as well.

Sorry Jens, that was my fault. I prepared the branch because Konrad has been too busy and Roger doesn't have a kernel.org account yet.

I've now rebased this branch on your for-3.20/drivers branch.

David

#4 lore raw
Quoted 24 lines · David Vrabel
Quoted 23 lines · Jens Axboe
Quoted 21 lines · Roger Pau Monné

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello Jens,

There are 3 fixes for Xen blk drivers. One adds myself as a maintainer (together with Konrad). There's also one to improve compatibility with older xen-blkfront versions that did not specify a protocol version. The remaining one is a fix for blkfront to correctly account the number of requests on the queue when resuming from suspension.

Thanks, Roger.

The following changes since commit
e36f014edff70fc02b3d3d79cead1d58f289332e:

    Linux 3.19-rc7 (2015-02-01 20:07:21 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git for-jens-3.20

Quoted 7 lines
Quoted 2 lines

This is based on 3.19-rc7, which means that when I pulled it into for-3.20/drivers, I get a ton of unrelated commits as well.

Sorry Jens, that was my fault. I prepared the branch because Konrad has been too busy and Roger doesn't have a kernel.org account yet.

I've now rebased this branch on your for-3.20/drivers branch.

Looks better now, thanks, pulled into for-3.20/drivers.

Signature · 7 lines
Jens Axboe


_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel
#5 lore raw
In reply to David Vrabel
Quoted 24 lines · David Vrabel
Quoted 23 lines · Jens Axboe
Quoted 21 lines · Roger Pau Monné

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello Jens,

There are 3 fixes for Xen blk drivers. One adds myself as a maintainer (together with Konrad). There's also one to improve compatibility with older xen-blkfront versions that did not specify a protocol version. The remaining one is a fix for blkfront to correctly account the number of requests on the queue when resuming from suspension.

Thanks, Roger.

The following changes since commit
e36f014edff70fc02b3d3d79cead1d58f289332e:

    Linux 3.19-rc7 (2015-02-01 20:07:21 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git for-jens-3.20

Quoted 7 lines
Quoted 2 lines

This is based on 3.19-rc7, which means that when I pulled it into for-3.20/drivers, I get a ton of unrelated commits as well.

Sorry Jens, that was my fault. I prepared the branch because Konrad has been too busy and Roger doesn't have a kernel.org account yet.

I've now rebased this branch on your for-3.20/drivers branch.

Looks better now, thanks, pulled into for-3.20/drivers.

Signature · 1 line
Jens Axboe
#6 lore raw
In reply to Jens Axboe
Quoted 17 lines · Jens Axboe
Quoted 16 lines · Roger Pau Monné

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello Jens,

There are 3 fixes for Xen blk drivers. One adds myself as a maintainer (together with Konrad). There's also one to improve compatibility with older xen-blkfront versions that did not specify a protocol version. The remaining one is a fix for blkfront to correctly account the number of requests on the queue when resuming from suspension.

Thanks, Roger.

The following changes since commit
e36f014edff70fc02b3d3d79cead1d58f289332e:

Quoted 8 lines
Quoted 5 lines
   Linux 3.19-rc7 (2015-02-01 20:07:21 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git for-jens-3.20

This is based on 3.19-rc7, which means that when I pulled it into for-3.20/drivers, I get a ton of unrelated commits as well.

Sorry Jens, that was my fault. I prepared the branch because Konrad has been too busy and Roger doesn't have a kernel.org account yet.

I've now rebased this branch on your for-3.20/drivers branch.

David

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel