Skip to contentSkip to conversation

Bump rpi-firmware version for RPi2

PATCH New James Hebden 2 participants 2 messages Feb 13, 2015 – Feb 22, 2015 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

PATCH 1/1 Bump rpi-firmware version for RPi2

From: James Hebden <[email protected]>

This patch bumps the rpi-firmware package to include RPi2 support. It also removes the workaround previously required when installing DTBs for the pi, as they are now in the same branch as the latest firmware. It also adds the install commands to install the DTB for BCM2709 (RPi2 B)

---
  package/rpi-firmware/rpi-firmware.mk | 7 ++-----
  1 file changed, 2 insertions(+), 5 deletions(-)
package/rpi-firmware/rpi-firmware.mk +2 -5
index 03178d5..a343cbe 100644
@@ -4,7 +4,7 @@
  #
  ################################################################################
 
-RPI_FIRMWARE_VERSION = 393dcc0e76f18f6ac1b67ba45d36058410670034
+RPI_FIRMWARE_VERSION = 47bd0f0f46bc053d8e21655e3a69c4a73ae19b41
  RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
  RPI_FIRMWARE_LICENSE = BSD-3c
  RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
@@ -13,13 +13,10 @@ RPI_FIRMWARE_INSTALL_IMAGES = YES
 
  ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y)
  RPI_FIRMWARE_DEPENDENCIES += host-rpi-firmware
-# The Device Tree blobs are not yet in the master branch of the
-# raspberrypi firmware project, so we have to use a separate branch
-# for now.
-RPI_FIRMWARE_VERSION = 09627457b9e15bf4ea4e6751d3c173a3fb65df07
  define RPI_FIRMWARE_INSTALL_DTB
  	$(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b.dtb
  	$(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b-plus.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b-plus.dtb
+	$(INSTALL) -D -m 0644 $(@D)/boot/bcm2709-rpi-2-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2709-rpi-2-b.dtb
  	for ovldtb in  $(@D)/boot/overlays/*.dtb; do \
  		$(INSTALL) -D -m 0644 $${ovldtb} $(BINARIES_DIR)/rpi-firmware/overlays/$${ovldtb##*/} || exit 1; \
  	done
Signature · 1 line
2.1.4
#2 lore raw

PATCH 1/1 Bump rpi-firmware version for RPi2

James, All,

On 2015-02-13 20:55 +1100, James Hebden spake thusly:

Quoted 7 lines

From: James Hebden <[email protected]>

This patch bumps the rpi-firmware package to include RPi2 support. It also removes the workaround previously required when installing DTBs for the pi, as they are now in the same branch as the latest firmware. It also adds the install commands to install the DTB for BCM2709 (RPi2 B)

The commit log should be wrapped at ~75 chars. Also, it should be above your Signed-off-by line.

I'll fix and resubmit (with a further bump to latest as of today), so I've marked yours as "Changes Requested" in our patchwork.

Thank you! :-)

Regards,
Yann E. MORIN.

Quoted 42 lines
---
 package/rpi-firmware/rpi-firmware.mk | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)
package/rpi-firmware/rpi-firmware.mk +2 -5
index 03178d5..a343cbe 100644
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-RPI_FIRMWARE_VERSION = 393dcc0e76f18f6ac1b67ba45d36058410670034
+RPI_FIRMWARE_VERSION = 47bd0f0f46bc053d8e21655e3a69c4a73ae19b41
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3c
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
@@ -13,13 +13,10 @@ RPI_FIRMWARE_INSTALL_IMAGES = YES
 
 ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS),y)
 RPI_FIRMWARE_DEPENDENCIES += host-rpi-firmware
-# The Device Tree blobs are not yet in the master branch of the
-# raspberrypi firmware project, so we have to use a separate branch
-# for now.
-RPI_FIRMWARE_VERSION = 09627457b9e15bf4ea4e6751d3c173a3fb65df07
 define RPI_FIRMWARE_INSTALL_DTB
 	$(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b.dtb
 	$(INSTALL) -D -m 0644 $(@D)/boot/bcm2708-rpi-b-plus.dtb $(BINARIES_DIR)/rpi-firmware/bcm2708-rpi-b-plus.dtb
+	$(INSTALL) -D -m 0644 $(@D)/boot/bcm2709-rpi-2-b.dtb $(BINARIES_DIR)/rpi-firmware/bcm2709-rpi-2-b.dtb
 	for ovldtb in  $(@D)/boot/overlays/*.dtb; do \
 		$(INSTALL) -D -m 0644 $${ovldtb} $(BINARIES_DIR)/rpi-firmware/overlays/$${ovldtb##*/} || exit 1; \
 	done
Signature · 9 lines
2.1.4




_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'