cannot compile kernel module - headers missing
hi,
i have a simple hello world kernel module and i cannot compile it. linux headers are missing i tried to set -I $(OECORE_TARGET_SYSROOT)usr/src/kernel/include/
but there seems to be much more missing..
is there any way to do this easier?
here's what i have:
module.c
-------------
#include <linux/module.h>
#include <linux/spi.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
/**
* initialisiert das Kernel - Modul
*/
int init_module(void) {
printk(KERN_DEBUG "Hallo Kernel!\n");
return 0;
}void cleanup_module (void) {
printk (KERN_DEBUG "Ciao!\n");
}and my Makefile
----------------------
# file Makefile # copyright Copyright (c) 2012 Toradex AG # [Software License Agreement] # author $Author$ # version $Rev$ # date $Date$ # brief a simple makefile to (cross) compile. # uses the openembedded provided sysroot and toolchain # target linux on Colibri T20 / Colibri T30 # caveats -
##############################################################################
# Setup your project settings
##############################################################################
# Set the input source files, the binary name and used libraries to link SRCS = module.c
PROG := module
LIBS =CONF_LIBS =C_FLAGS = -D__KERNEL__ -D__SMP__ -DMODULE -DMODVERSIONS
# Set flags to the compiler and linker
CFLAGS += -O2 -g -Wall $(PKG-CONFIG) --cflags $(CONF_LIBS) $(ARCH_CFLAGS) $(C_FLAGS) LDFLAGS += $(PKG-CONFIG) --libs $(CONF_LIBS)
##############################################################################
# Setup your build environment
##############################################################################
# Set the path to the oe built sysroot and
# Set the prefix for the cross compilerOECORE_NATIVE_SYSROOT ?= $(HOME)/oe-core/build/out-eglibc/sysroots/x86_64-linux/ OECORE_TARGET_SYSROOT ?= $(HOME)/oe-core/build/out-eglibc/sysroots/apalis-imx6/CROSS_COMPILE ?= $(OECORE_NATIVE_SYSROOT)usr/bin/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/arm-angstrom-linux-gnueabi-
##############################################################################
# The rest of the Makefile usually needs no change
##############################################################################
# Set differencies between native and cross compilation
ifneq ($(strip $(CROSS_COMPILE)),)
LDFLAGS += -L$(OECORE_TARGET_SYSROOT)usr/lib
-Wl,-rpath-link,$(OECORE_TARGET_SYSROOT)usr/lib -L$(OECORE_TARGET_SYSROOT)lib -Wl,-rpath-link,$(OECORE_TARGET_SYSROOT)lib
ARCH_CFLAGS = -march=armv7-a -fno-tree-vectorize -mthumb-interwork
-mfloat-abi=hard -mtune=cortex-a9
BIN_POSTFIX =
PKG-CONFIG = export PKG_CONFIG_SYSROOT_DIR=$(OECORE_TARGET_SYSROOT); \
export
PKG_CONFIG_PATH=$(OECORE_TARGET_SYSROOT)/usr/lib/pkgconfig/; \
$(OECORE_NATIVE_SYSROOT)usr/bin/pkg-configelse
# Native compile
PKG-CONFIG = pkg-config
ARCH_CFLAGS =
# Append .x86 to the object files and binaries, so that native and cross builds can live side by side
BIN_POSTFIX = .x86
endif
# Toolchain binaries
CC = $(CROSS_COMPILE)gcc
LD = $(CROSS_COMPILE)gcc
STRIP = $(CROSS_COMPILE)strip
RM = rm -f
# Sets the output filename and object files
PROG := $(PROG)$(BIN_POSTFIX)
OBJS = $(SRCS:.c=$(BIN_POSTFIX).o)
DEPS = $(OBJS:.o=.o.d)
# pull in dependency info for *existing* .o files -include $(DEPS)
all: $(PROG)
$(PROG): $(OBJS) Makefile
$(CC) $(CFLAGS) -o $@ $(OBJS) $(LIBS) $(LDFLAGS)
#$(STRIP) $@%$(BIN_POSTFIX).o: %.c
$(CC) -c $(CFLAGS) -o $@ $<
$(CC) -MM $(CFLAGS) $< > [email protected]clean:
$(RM) $(OBJS) $(PROG) $(DEPS)
.PHONY: all clean
Quoted 6 lines · Jens Rapp
hi,
i have a simple hello world kernel module and i cannot compile it. linux headers are missing
i tried to set -I $(OECORE_TARGET_SYSROOT)usr/src/kernel/include/ but there seems to be much more missing..
What release are you using ? The kernel sources recently changed in master (for the 1.8 release), so that could be catching you in transition.
Quoted 2 lines
is there any way to do this easier?
We have an example in meta-skeleton for a hello world module. (meta-skeleton/recipes-kernel/hello-mod/). Have a look there and it may answer most (if not all) questions.
Bruce
Quoted 127 lines
here's what i have:
module.c
-------------
#include <linux/module.h>
#include <linux/spi.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>#include <
linux/kernel.h>/**
* initialisiert das Kernel - Modul
*/int init_module(void) { printk(KERN_DEBUG "Hallo Kernel!\n"); return 0; }void cleanup_module (void) { printk (KERN_DEBUG "Ciao!\n"); }and my
Makefile
----------------------# file Makefile # copyright Copyright (c) 2012 Toradex AG # [Software License Agreement] # author $Author$ # version $Rev$ # date $Date$ # brief a simple makefile to (cross) compile. # uses the openembedded provided sysroot and toolchain # target linux on Colibri T20 / Colibri T30 # caveats -##############################################################################
# Setup your project settings
############################################################################### Set the input source files, the binary name and used libraries to link SRCS =
module.c
PROG := module
LIBS =CONF_LIBS=C_FLAGS= -D__KERNEL__ -D__SMP__ -DMODULE -DMODVERSIONS
# Set flags to the compiler and linker
CFLAGS += -O2 -g -Wall$(PKG-CONFIG) --cflags $(CONF_LIBS)$(ARCH_CFLAGS) $(C_FLAGS)
LDFLAGS +=$(PKG-CONFIG) --libs $(CONF_LIBS)##############################################################################
# Setup your build environment
############################################################################### Set the path to the oe built sysroot and
# Set the prefix for the cross compilerOECORE_NATIVE_SYSROOT?=
$(HOME)/oe-core/build/out-eglibc/sysroots/x86_64-linux/OECORE_TARGET_SYSROOT?=
$(HOME)/oe-core/build/out-eglibc/sysroots/apalis-imx6/CROSS_COMPILE?= $(OECORE_NATIVE_SYSROOT)usr/bin/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/arm-angstrom-linux-gnueabi-##############################################################################
# The rest of the
Makefileusually needs no change
############################################################################### Set differencies between native and cross compilation ifneq ($(strip $(CROSS_COMPILE)),)
LDFLAGS += -L$(OECORE_TARGET_SYSROOT)usr/lib(quoted diff) +0
-3-Wl,-rpath-link,$(OECORE_TARGET_SYSROOT)usr/lib -L$(OECORE_TARGET_SYSROOT)lib -Wl,-rpath-link,$(OECORE_TARGET_SYSROOT)lib ARCH_CFLAGS = -march=armv7-a -fno-tree-vectorize -mthumb-interwork -mfloat-abi=hard -mtune=cortex-a9 BIN_POSTFIX = PKG-CONFIG = export PKG_CONFIG_SYSROOT_DIR=$(OECORE_TARGET_SYSROOT); \ exportPKG_CONFIG_PATH=$(OECORE_TARGET_SYSROOT)/usr/lib/pkgconfig/; \ $(OECORE_NATIVE_SYSROOT)usr/bin/pkg-configelse
# Native compile
PKG-CONFIG = pkg-config
ARCH_CFLAGS=
# Append .x86 to the object files and binaries, so that native and cross builds can live side by side
BIN_POSTFIX= .x86
endif# Toolchain binaries
CC = $(CROSS_COMPILE)gcc
LD = $(CROSS_COMPILE)gcc
STRIP = $(CROSS_COMPILE)strip
RM = rm -f# Sets the output filename and object files
PROG := $(PROG)$(BIN_POSTFIX)
OBJS = $(SRCS:.c=$(BIN_POSTFIX).o)
DEPS = $(OBJS:.o=.o.d)# pull in dependency info for *existing* .o files -include $(DEPS)all: $(PROG)
$(PROG): $(OBJS)
Makefile$(CC) $(CFLAGS) -o $@ $(OBJS) $(LIBS) $(LDFLAGS) #$(STRIP) $@%$(BIN_POSTFIX).o: %.c
$(CC) -c $(CFLAGS) -o $@ $< $(CC) -MM $(CFLAGS) $< > [email protected]clean:
$(RM) $(OBJS) $(PROG) $(DEPS).PHONY: all clean