clockevents fixes for 4.0-rc1
Hi Thomas, Ingo,
this pull request provides the following fixes for 4.0-rc1:
- Fix the Kconfig to prevent the asm9260 timer to be compiled with allyesconfig with sparc/sparc64 (Daniel Lezcano)
- Reorder the mtk driver init sequence in order to prevent a potential
race when the clock is registered before the irq handler is set (Matthias Brugger)
- Fix a section mismatch for the pxa driver (Robert Jarzmik)
Thanks !
-- Daniel
The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:
Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)
are available in the git repository at:
http://git.linaro.org/people/daniel.lezcano/linux.git clockevents/4.0-rc1
for you to fetch changes up to 6f2116ebe24f9f0f0d90ad17e405ea181f2499eb:
clocksource: pxa: Fix section mismatch (2015-02-25 10:28:55 +0100)
----------------------------------------------------------------
Daniel Lezcano (1):
clockevents: asm9260: Fix compilation error with sparc/sparc64
allyesconfig
Matthias Brugger (1):
clocksource: mtk: Fix race conditions in probe code
Robert Jarzmik (1):
clocksource: pxa: Fix section mismatch
arch/arm/mach-asm9260/Kconfig | 2 ++ drivers/clocksource/Kconfig | 16 +++++----------- drivers/clocksource/mtk_timer.c | 9 +++++---- drivers/clocksource/pxa_timer.c | 2 +- 4 files changed, 13 insertions(+), 16 deletions(-)
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
PATCH 1/3 clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfig
The Kconfig options for the asm9260 timer is wrong as it can be selected by another platform with allyes config and thus leading to a compilation failure as some non arch related code is pulled by the compilation.
Fix this by having the platform Kconfig to select the timer as it is done for the others drivers.
Conflicts:
drivers/clocksource/Kconfig
--- arch/arm/mach-asm9260/Kconfig | 2 ++ drivers/clocksource/Kconfig | 16 +++++----------- 2 files changed, 7 insertions(+), 11 deletions(-)
arch/arm/mach-asm9260/Kconfig +2 -0
@@ -2,5 +2,7 @@ config MACH_ASM9260 bool "Alphascale ASM9260" depends on ARCH_MULTI_V5 select CPU_ARM926T + select ASM9260_TIMER + select GENERIC_CLOCKEVENTS help Support for Alphascale ASM9260 based platform.
drivers/clocksource/Kconfig +5 -11
@@ -63,6 +63,11 @@ config VT8500_TIMER config CADENCE_TTC_TIMER bool +config ASM9260_TIMER + bool + select CLKSRC_MMIO + select CLKSRC_OF + config CLKSRC_NOMADIK_MTU bool depends on (ARCH_NOMADIK || ARCH_U8500)
@@ -245,15 +250,4 @@ config CLKSRC_PXA help This enables OST0 support available on PXA and SA-11x0 platforms. - -config ASM9260_TIMER - bool "Alphascale ASM9260 timer driver" - depends on GENERIC_CLOCKEVENTS - select CLKSRC_MMIO - select CLKSRC_OF - default y if MACH_ASM9260 - help - This enables build of a clocksource and clockevent driver for - the 32-bit System Timer hardware available on a Alphascale ASM9260. - endmenu
Signature · 1 line
1.9.1
PATCH 2/3 clocksource: mtk: Fix race conditions in probe code
From: Matthias Brugger <[email protected]>
We have two race conditions in the probe code which could lead to a null pointer dereference in the interrupt handler.
The interrupt handler accesses the clockevent device, which may not yet be registered.
First race condition happens when the interrupt handler gets registered before the interrupts get disabled. The second race condition happens when the interrupts get enabled, but the clockevent device is not yet registered.
Fix that by disabling the interrupts before we register the interrupt and enable the interrupts after the clockevent device got registered.
--- drivers/clocksource/mtk_timer.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/clocksource/mtk_timer.c +5 -4
@@ -224,6 +224,8 @@ static void __init mtk_timer_init(struct device_node *node) } rate =clk_get_rate (clk); +mtk_timer_global_reset (evt); +if (request_irq (evt->dev.irq, mtk_timer_interrupt,IRQF_TIMER |IRQF_IRQPOLL ,"mtk_timer" , evt)) {pr_warn ("failed to setup irq %d\n" , evt->dev.irq);
@@ -232,8 +234,6 @@ static void __init mtk_timer_init(struct device_node *node) evt->ticks_per_jiffy =DIV_ROUND_UP (rate,HZ ); -mtk_timer_global_reset (evt); -/* Configure clock source */ mtk_timer_setup (evt,GPT_CLK_SRC ,TIMER_CTRL_OP_FREERUN ); clocksource_mmio_init(evt->gpt_base + TIMER_CNT_REG(GPT_CLK_SRC),
@@ -241,10 +241,11 @@ static void __init mtk_timer_init(struct device_node *node)/* Configure clock event */ mtk_timer_setup (evt,GPT_CLK_EVT ,TIMER_CTRL_OP_REPEAT ); -mtk_timer_enable_irq (evt,GPT_CLK_EVT ); -clockevents_config_and_register (&evt->dev, rate,0x3 ,0xffffffff ); + +mtk_timer_enable_irq (evt,GPT_CLK_EVT ); +return ; err_clk_disable:
Signature · 1 line
1.9.1
PATCH 3/3 clocksource: pxa: Fix section mismatch
In reply to Daniel LezcanoFrom: Robert Jarzmik <[email protected]>
As pxa_timer_common_init() is only called in init context, mark it as such, and quiesce the compiler warnings :
WARNING: vmlinux.o(.text.unlikely+0x45d4): Section mismatch in reference from the function pxa_timer_common_init() to the function .init.text:sched_clock_register()
WARNING: vmlinux.o(.text.unlikely+0x4610): Section mismatch in reference from the function pxa_timer_common_init() to the function .init.text:clocksource_mmio_init()
--- drivers/clocksource/pxa_timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clocksource/pxa_timer.c +1 -1
@@ -163,7 +163,7 @@ static struct irqaction pxa_ost0_irq = { .dev_id = &ckevt_pxa_osmr0, }; -static void pxa_timer_common_init (int irq,unsigned long clock_tick_rate) +static void __init pxa_timer_common_init (int irq,unsigned long clock_tick_rate) {timer_writel (0 ,OIER );timer_writel (OSSR_M0 |OSSR_M1 |OSSR_M2 |OSSR_M3 ,OSSR );
Signature · 1 line
1.9.1