arm: ls102xa: Define default values for some CCSR macros
PATCH 1/1 arm: ls102xa: Define default values for some CCSR macros
This patch is to define default values for some CCSR macros to make header files cleaner.
Signed-off-by Alison Wang <[email protected]>
--- arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 37 +++++++++++++++++++++++ 1 file changed, 37 insertions(+)
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +37 -0
@@ -37,6 +37,43 @@#define DCFG_DCSR_PORCR1 0 +/* +* Define default values for some CCSR macros to make header files cleaner +* +* To completely disable CCSR relocation in a board header file, define +* CONFIG_SYS_CCSR_DO_NOT_RELOCATE. This will force CONFIG_SYS_CCSRBAR_PHYS +* to a value that is the same as CONFIG_SYS_CCSRBAR. +*/ + +#ifdef CONFIG_SYS_CCSRBAR_PHYS +#error "Do not define CONFIG_SYS_CCSRBAR_PHYS directly." +#endif + +#ifdef CONFIG_SYS_CCSR_DO_NOT_RELOCATE +#undef CONFIG_SYS_CCSRBAR_PHYS_HIGH +#undef CONFIG_SYS_CCSRBAR_PHYS_LOW +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0 +#endif + +#ifndef CONFIG_SYS_CCSRBAR +#define CONFIG_SYS_CCSRBAR CONFIG_SYS_IMMR +#endif + +#ifndef CONFIG_SYS_CCSRBAR_PHYS_HIGH +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0xf +#else +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0 +#endif +#endif + +#ifndef CONFIG_SYS_CCSRBAR_PHYS_LOW +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_IMMR +#endif + +#define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \ + CONFIG_SYS_CCSRBAR_PHYS_LOW) +struct sys_info {unsigned long freq_processor[CONFIG_MAX_CPUS ];unsigned long freq_systembus;
Signature · 1 line
2.1.0.27.g96db324
PATCH 1/1 arm: ls102xa: Define default values for some CCSR macros
Quoted 5 lines · Alison Wang
This patch is to define default values for some CCSR macros to make header files cleaner.
Signed-off-by Alison Wang <[email protected]>---
Applied to u-boot-fsl-qoriq master branch, awaiting upstream.
York