Skip to contentSkip to conversation

ARM: BCM5301X: Add DT for Netgear R8000

PATCH New Rafał Miłecki 2 participants 2 messages Feb 18, 2015 – Mar 4, 2015

Subsystems (2)
Device tree bindings Arm and arm64 SoC sub-architectures (common parts)
lore
Share & tools
lore

Rafał Miłecki

author
#0 lore raw

PATCH 1/1 ARM: BCM5301X: Add DT for Netgear R8000

Signed-off-by Rafa? Mi?ecki <[email protected]>
Reported-by Ian Kent <[email protected]>
---
 arch/arm/boot/dts/Makefile                  |  3 +-
 arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 77 +++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/bcm4709-netgear-r8000.dts
arch/arm/boot/dts/Makefile +2 -1
index a8873b8..f1cb752 100644
@@ -59,7 +59,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-netgear-r6300-v2.dtb \
 	bcm47081-asus-rt-n18u.dtb \
 	bcm47081-buffalo-wzr-600dhp2.dtb \
-	bcm47081-buffalo-wzr-900dhp.dtb
+	bcm47081-buffalo-wzr-900dhp.dtb \
+	bcm4709-netgear-r8000.dtb
 dtb-$(CONFIG_ARCH_BCM_63XX) += \
 	bcm963138dvt.dtb
 dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
arch/arm/boot/dts/bcm4709-netgear-r8000.dts new file +77 -0

77 lines not on this page · raw message

Signature · 1 line
1.8.4.5