Fix multipoint GRE per-packet lookup in neighbour table

Hi all,

For multipoint GRE, there is no CAP_XMIT, because it is determined per-packet if the destination can be reached.

In the transmit function though, it still only checks against CAP_XMIT.

This patch fixes that, and allows forwarding via GRE through the neighbour table.

After patch, this works:

$ ip -6 neigh list|grep fe80::3
fe80::3 dev gre1 lladdr fc:00:00:00:00:00:00:00:00:00:00:00:00:00:00:03
STALE

$ ping6 fe80::3%gre1
PING fe80::3%gre1(fe80::3) 56 data bytes
64 bytes from fe80::3: icmp_seq=1 ttl=64 time=0.750 ms

-- Wilco Baan Hofman

From: Wilco Baan Hofman <[email protected]>
Date: Sun, 8 Mar 2015 02:47:22 +0100
Subject: [PATCH] Fix multipoint GRE (per packet transmit)

---
 net/ipv6/ip6_gre.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index c9aee7d..0fdc55a 100644
@@ -902,7 +902,7 @@ static netdev_tx_t ip6gre_tunnel_xmit(struct sk_buff

*skb,

     struct net_device_stats *stats = &t->dev->stats;
     int ret;

- if (!ip6_tnl_xmit_ctl(t, &t->parms.laddr, &t->parms.raddr))
+ if (!ip6_tnl_xmit_ctl(t, &t->parms.laddr, &t->parms.raddr) &&
!(t->parms.flags & IP6_TNL_F_CAP_PER_PACKET))

         goto tx_err;
 
     switch (skb->protocol) {

2.1.4