Remove typedefs and rename struct
v2 cover Remove typedefs and rename struct
This patchset removes unnecessary type definitions for structs detected by coccinelle and renames the structures in order to keep the notations consistent.
Changes in v2:
- update script to drop _t in dig_t in [PATCH 1/2]
Cristina Opriceana (2):
Staging: rtl8192u: Staging: rtl8192u: Do not add new typedefs
Staging: Staging: rtl8192u: Rename struct to avoid CamelCase
drivers/staging/rtl8192u/r8192U_dm.c | 5 +++-- drivers/staging/rtl8192u/r8192U_dm.h | 12 ++++++------ 2 files changed, 9 insertions(+), 8 deletions(-)
Signature · 1 line
1.9.1
PATCH v2 1/2 Staging: rtl8192u: Do not add new typedefs
This patch removes the dig_t and DRxPathSel type definitions in order to avoid the following warning: "WARNING: Do not add new typedefs". Done with coccinelle and this script:
@r@ type t; identifier id; @@
typedef struct id
{...}
t;
@script:python get_name@
t << r.t;
tdres;
@@
coccinelle.tdres = t.replace("_t", "");
@r_match@ type r.t; identifier r.id; identifier get_name.tdres; @@
-typedef
struct
-id
+tdres
{...}
-t
;
@r_replace@ type r.t; identifier get_name.tdres; @@ -t
+struct tdres
--- drivers/staging/rtl8192u/r8192U_dm.c | 5 +++-- drivers/staging/rtl8192u/r8192U_dm.h | 12 ++++++------ 2 files changed, 9 insertions(+), 8 deletions(-)
drivers/staging/rtl8192u/r8192U_dm.c +3 -2
@@ -36,11 +36,12 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] = {/*------------------------Define global variable-----------------------------*/ /* Debug variable ? */ -dig_t dm_digtable; +struct dig dm_digtable;/* Store current software write register content for MAC PHY. */ u8 dm_shadow[16 ][256 ] = { {0 } };/* For Dynamic Rx Path Selection by Signal Strength */ -DRxPathSel DM_RxPathSelTable; +struct DRxPathSel DM_RxPathSelTable; +/*------------------------Define global variable-----------------------------*/
drivers/staging/rtl8192u/r8192U_dm.h +6 -6
@@ -67,7 +67,7 @@/*------------------------------Define structure----------------------------*/ /* 2007/10/04 MH Define upper and lower threshold of DIG enable or disable. */ -typedef struct _dynamic_initial_gain_threshold_ { +struct dig {u8 dig_enable_flag;u8 dig_algorithm;u8 dbg_mode;
@@ -98,7 +98,7 @@ typedef struct _dynamic_initial_gain_threshold_ {bool initialgain_lowerbound_state;long rssi_val; -} dig_t; +}; typedef enum tag_dynamic_init_gain_state_definition { DM_STA_DIG_OFF = 0,
@@ -163,7 +163,7 @@ typedef enum tag_dig_cck_cs_ratio_state_definition {DIG_CS_RATIO_HIGHER =1 , DIG_CS_MAX } dm_dig_cs_ratio_e; -typedef struct _Dynamic_Rx_Path_Selection_ { +struct DRxPathSel {u8 Enable;u8 DbgMode;u8 cck_method;
@@ -177,7 +177,7 @@ typedef struct _Dynamic_Rx_Path_Selection_ {u8 rf_rssi[4 ];u8 rf_enable_rssi_th[4 ];long cck_pwdb_sta[4 ]; -} DRxPathSel; +}; typedef enum tag_CCK_Rx_Path_Method_Definition { CCK_Rx_Version_1 = 0,
@@ -200,9 +200,9 @@ typedef struct tag_Tx_Config_Cmd_Format {/*------------------------Export global variable----------------------------*/ -extern dig_t dm_digtable; +extern struct dig dm_digtable;extern u8 dm_shadow[16 ][256 ]; -extern DRxPathSel DM_RxPathSelTable; +extern struct DRxPathSel DM_RxPathSelTable;/*------------------------Export global variable----------------------------*/
Signature · 1 line
1.9.1
Re: [Outreachy kernel] [PATCH v2 1/2] Staging: rtl8192u: Do not add new typedefs
Quoted 28 lines · Cristina Opriceana
This patch removes the
dig_tand DRxPathSel type definitions in order to avoid the following warning: "WARNING: Do not add new typedefs". Done with coccinelle and this script:@r@ type t; identifier id; @@
typedef struct id
{...}
t;@script:python get_name@
t << r.t;
tdres;
@@
coccinelle.tdres =t.replace("_t", "");@r_match@ type r.t; identifier r.id;
identifier get_name.tdres; @@
-typedef
struct(quoted diff) +1
-1-id +tdres{...}
-t
;
@r_replace@ type r.t; identifier get_name.tdres; @@(quoted diff) +1
-1-t +struct tdres
Quoted 1 line
Signed-off-by Cristina Opriceana <[email protected]>
Removing pointless typedefs like these is clearly a win. However for something like this, I don't think you need to include the coccinnelle rules, simply stating that you are getting rid of unnecessary typedefs is a win.
Cheers,
Jes
Quoted 77 lines
--- drivers/staging/rtl8192u/r8192U_dm.c | 5 +++-- drivers/staging/rtl8192u/r8192U_dm.h | 12 ++++++------ 2 files changed, 9 insertions(+), 8 deletions(-)drivers/staging/rtl8192u/r8192U_dm.c +3
-2@@ -36,11 +36,12 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] = {/*------------------------Define global variable-----------------------------*/ /* Debug variable ? */ -dig_t dm_digtable; +struct dig dm_digtable;/* Store current software write register content for MAC PHY. */ u8 dm_shadow[16 ][256 ] = { {0 } };/* For Dynamic Rx Path Selection by Signal Strength */ -DRxPathSel DM_RxPathSelTable; +struct DRxPathSel DM_RxPathSelTable; +/*------------------------Define global variable-----------------------------*/ drivers/staging/rtl8192u/r8192U_dm.h +6
-6@@ -67,7 +67,7 @@/*------------------------------Define structure----------------------------*/ /* 2007/10/04 MH Define upper and lower threshold of DIG enable or disable. */ -typedef struct _dynamic_initial_gain_threshold_ { +struct dig {u8 dig_enable_flag;u8 dig_algorithm;u8 dbg_mode;@@ -98,7 +98,7 @@ typedef struct _dynamic_initial_gain_threshold_ {bool initialgain_lowerbound_state;long rssi_val; -} dig_t; +}; typedef enum tag_dynamic_init_gain_state_definition { DM_STA_DIG_OFF = 0,@@ -163,7 +163,7 @@ typedef enum tag_dig_cck_cs_ratio_state_definition {DIG_CS_RATIO_HIGHER =1 , DIG_CS_MAX } dm_dig_cs_ratio_e; -typedef struct _Dynamic_Rx_Path_Selection_ { +struct DRxPathSel {u8 Enable;u8 DbgMode;u8 cck_method;@@ -177,7 +177,7 @@ typedef struct _Dynamic_Rx_Path_Selection_ {u8 rf_rssi[4 ];u8 rf_enable_rssi_th[4 ];long cck_pwdb_sta[4 ]; -} DRxPathSel; +}; typedef enum tag_CCK_Rx_Path_Method_Definition { CCK_Rx_Version_1 = 0,@@ -200,9 +200,9 @@ typedef struct tag_Tx_Config_Cmd_Format {/*------------------------Export global variable----------------------------*/ -extern dig_t dm_digtable; +extern struct dig dm_digtable;extern u8 dm_shadow[16 ][256 ]; -extern DRxPathSel DM_RxPathSelTable; +extern struct DRxPathSel DM_RxPathSelTable;/*------------------------Export global variable----------------------------*/
Re: [Outreachy kernel] [PATCH v2 1/2] Staging: rtl8192u: Do not add new typedefs
Quoted 29 lines · Jes Sorensen
Quoted 28 lines · Cristina Opriceana
This patch removes the
dig_tand DRxPathSel type definitions in order to avoid the following warning: "WARNING: Do not add new typedefs". Done with coccinelle and this script:@r@ type t; identifier id; @@
typedef struct id
{...}
t;@script:python get_name@
t << r.t;
tdres;
@@
coccinelle.tdres =t.replace("_t", "");@r_match@ type r.t; identifier r.id;
identifier get_name.tdres; @@
-typedef
struct(quoted diff) +1
-1-id +tdres{...}
-t
;
@r_replace@ type r.t; identifier get_name.tdres; @@(quoted diff) +1
-1-t +struct tdres
Quoted 6 lines
Quoted 1 line
Signed-off-by Cristina Opriceana <[email protected]>Removing pointless typedefs like these is clearly a win. However for something like this, I don't think you need to include the coccinnelle rules, simply stating that you are getting rid of unnecessary typedefs is a win.
Actually, I think the rule is nice, because we can see that she is taking care of the _t before looking at each case. I would tend to put a complete rule like this in a cover letter though, but it depends on how the patch series is organized.
julia
Quoted 90 lines
Cheers,
JesQuoted 67 lines
--- drivers/staging/rtl8192u/r8192U_dm.c | 5 +++-- drivers/staging/rtl8192u/r8192U_dm.h | 12 ++++++------ 2 files changed, 9 insertions(+), 8 deletions(-)drivers/staging/rtl8192u/r8192U_dm.c +3
-2@@ -36,11 +36,12 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] = {/*------------------------Define global variable-----------------------------*/ /* Debug variable ? */ -dig_t dm_digtable; +struct dig dm_digtable;/* Store current software write register content for MAC PHY. */ u8 dm_shadow[16 ][256 ] = { {0 } };/* For Dynamic Rx Path Selection by Signal Strength */ -DRxPathSel DM_RxPathSelTable; +struct DRxPathSel DM_RxPathSelTable; +/*------------------------Define global variable-----------------------------*/ drivers/staging/rtl8192u/r8192U_dm.h +4
-4@@ -67,7 +67,7 @@/*------------------------------Define structure----------------------------*/ /* 2007/10/04 MH Define upper and lower threshold of DIG enable or disable. */ -typedef struct _dynamic_initial_gain_threshold_ { +struct dig {u8 dig_enable_flag;u8 dig_algorithm;u8 dbg_mode;@@ -98,7 +98,7 @@ typedef struct _dynamic_initial_gain_threshold_ {bool initialgain_lowerbound_state;long rssi_val; -} dig_t; +}; typedef enum tag_dynamic_init_gain_state_definition { DM_STA_DIG_OFF = 0,@@ -163,7 +163,7 @@ typedef enum tag_dig_cck_cs_ratio_state_definition {DIG_CS_RATIO_HIGHER =1 , DIG_CS_MAX } dm_dig_cs_ratio_e; -typedef struct _Dynamic_Rx_Path_Selection_ { +struct DRxPathSel {u8 Enable;u8 DbgMode;u8 cck_method;@@ -177,7 +177,7 @@ typedef struct _Dynamic_Rx_Path_Selection_ {u8 rf_rssi[4 ];u8 rf_enable_rssi_th[4 ];long cck_pwdb_sta[4 ]; -} DRxPathSel; +}; typedef enum tag_CCK_Rx_Path_Method_Definition { CCK_Rx_Version_1 = 0,@@ -200,9 +200,9 @@ typedef struct tag_Tx_Config_Cmd_Format {drivers/staging/rtl8192u/r8192U_dm.h typedef struct tag_Tx_Config_Cmd_Format { · line 208
Quoted 10 lines
drivers/staging/rtl8192u/r8192U_dm.h +2
-2/*------------------------Export global variable----------------------------*/ -extern dig_t dm_digtable; +extern struct dig dm_digtable;extern u8 dm_shadow[16 ][256 ]; -extern DRxPathSel DM_RxPathSelTable; +extern struct DRxPathSel DM_RxPathSelTable;/*------------------------Export global variable----------------------------*/ --
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/55084703.4010906%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
Re: [Outreachy kernel] [PATCH v2 1/2] Staging: rtl8192u: Do not add new typedefs
Quoted 40 lines · Julia Lawall
Quoted 29 lines · Jes Sorensen
Quoted 28 lines · Cristina Opriceana
This patch removes the
dig_tand DRxPathSel type definitions in order to avoid the following warning: "WARNING: Do not add new typedefs". Done with coccinelle and this script:@r@ type t; identifier id; @@
typedef struct id
{...}
t;@script:python get_name@
t << r.t;
tdres;
@@
coccinelle.tdres =t.replace("_t", "");@r_match@ type r.t; identifier r.id;
identifier get_name.tdres; @@
-typedef
struct(quoted diff) +1
-1-id +tdres{...}
-t
;
@r_replace@ type r.t; identifier get_name.tdres; @@(quoted diff) +1
-1-t +struct tdresQuoted 6 lines
Quoted 1 line
Signed-off-by Cristina Opriceana <[email protected]>Removing pointless typedefs like these is clearly a win. However for something like this, I don't think you need to include the coccinnelle rules, simply stating that you are getting rid of unnecessary typedefs is a win.
Quoted 4 lines
Actually, I think the rule is nice, because we can see that she is taking care of the _t before looking at each case. I would tend to put a complete rule like this in a cover letter though, but it depends on how the patch series is organized.
There is definitely a level of personal preference here. IMHO the rule doesn't add value to the commit log, since it doesn't deal with an actual bug. Having it in a cover-letter would be fine.
Cheers,
Jes
PATCH v2 2/2 Staging: rtl8192u: Rename struct to avoid CamelCase
In reply to Cristina OpriceanaThis patch renames struct DRxPathSel to dynamic_rx_path_sel in order to keep the notations consistent and to remove the warning:
"CHECK: Avoid CamelCase". Done with coccinelle:
@@ @@
struct
-DRxPathSel
+dynamic_rx_path_sel
{...}
@@ @@
struct
-DRxPathSel
+dynamic_rx_path_sel
--- drivers/staging/rtl8192u/r8192U_dm.c | 2 +- drivers/staging/rtl8192u/r8192U_dm.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/staging/rtl8192u/r8192U_dm.c +1 -1
@@ -40,7 +40,7 @@ struct dig dm_digtable;/* Store current software write register content for MAC PHY. */ u8 dm_shadow[16 ][256 ] = { {0 } };/* For Dynamic Rx Path Selection by Signal Strength */ -struct DRxPathSel DM_RxPathSelTable; +struct dynamic_rx_path_sel DM_RxPathSelTable;/*------------------------Define global variable-----------------------------*/
drivers/staging/rtl8192u/r8192U_dm.h +2 -2
@@ -163,7 +163,7 @@ typedef enum tag_dig_cck_cs_ratio_state_definition {DIG_CS_RATIO_HIGHER =1 , DIG_CS_MAX } dm_dig_cs_ratio_e; -struct DRxPathSel { +struct dynamic_rx_path_sel {u8 Enable;u8 DbgMode;u8 cck_method;
@@ -202,7 +202,7 @@ typedef struct tag_Tx_Config_Cmd_Format {/*------------------------Export global variable----------------------------*/ extern struct dig dm_digtable;extern u8 dm_shadow[16 ][256 ]; -extern struct DRxPathSel DM_RxPathSelTable; +extern struct dynamic_rx_path_sel DM_RxPathSelTable;/*------------------------Export global variable----------------------------*/
Signature · 1 line
1.9.1
Re: [Outreachy kernel] [PATCH v2 2/2] Staging: rtl8192u: Rename struct to avoid CamelCase
Quoted 14 lines · Cristina Opriceana
This patch renames struct DRxPathSel to
dynamic_rx_path_selin order to keep the notations consistent and to remove the warning:
"CHECK: Avoid CamelCase". Done with coccinelle:
@@ @@
struct(quoted diff) +1
-1-DRxPathSel +dynamic_rx_path_sel{...}
@@ @@
struct(quoted diff) +1
-1-DRxPathSel +dynamic_rx_path_sel
Quoted 5 lines
Signed-off-by Cristina Opriceana <[email protected]>--- drivers/staging/rtl8192u/r8192U_dm.c | 2 +- drivers/staging/rtl8192u/r8192U_dm.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
This is also a win, and again I would prefer to have the commit message simply state that you are getting rid of the StUdLyCaPs (I never understood who introduced the phrase CamelCase, it's clearly called studly caps - don't take too much note at this part :)
Referencing coccinelle is good when you are fixing a technical bug, but when something is cosmetic, like here, I would leave it out and just explain the change.
Cheers,
Jes
Quoted 36 lines
drivers/staging/rtl8192u/r8192U_dm.c +1
-1@@ -40,7 +40,7 @@ struct dig dm_digtable;/* Store current software write register content for MAC PHY. */ u8 dm_shadow[16 ][256 ] = { {0 } };/* For Dynamic Rx Path Selection by Signal Strength */ -struct DRxPathSel DM_RxPathSelTable; +struct dynamic_rx_path_sel DM_RxPathSelTable;/*------------------------Define global variable-----------------------------*/ drivers/staging/rtl8192u/r8192U_dm.h +2
-2@@ -163,7 +163,7 @@ typedef enum tag_dig_cck_cs_ratio_state_definition {DIG_CS_RATIO_HIGHER =1 , DIG_CS_MAX } dm_dig_cs_ratio_e; -struct DRxPathSel { +struct dynamic_rx_path_sel {u8 Enable;u8 DbgMode;u8 cck_method;@@ -202,7 +202,7 @@ typedef struct tag_Tx_Config_Cmd_Format {/*------------------------Export global variable----------------------------*/ extern struct dig dm_digtable;extern u8 dm_shadow[16 ][256 ]; -extern struct DRxPathSel DM_RxPathSelTable; +extern struct dynamic_rx_path_sel DM_RxPathSelTable;/*------------------------Export global variable----------------------------*/