sun6i: Add support for the Mixtile LOFT-Q board

PATCH New Hans de Goede 1 participant 1 message Mar 21, 2015 1 message not in the archive

lore

Share & tools

lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Hans de Goede

author

2015-03-21 13:29 UTC #1 lore raw

PATCH 1/1 sun6i: Add support for the Mixtile LOFT-Q board

Hi,

Quoted 10 lines · Phil Han

From: Han Pengfei <[email protected]>
The Mixtile LOFT-Q is an A31 based board with 2G RAM, 8G EMMC, sdio wifi, 1Gbit ethernet, HDMI display, toslink audio plug, 4 USB2.0 port, external USB2SATA connector, sd card plug, 3x60 external fpic expansion connector, NXP JN5168 zigbee gw, remote support.
Also see http://focalcrest.com/en/pc.html#pro02
Signed-off-by Han Pengfei <[email protected]>

Thanks I've queued this up in u-boot-sunxi/next for merging upstream.

Regards,

Hans

Quoted 42 lines

---
  board/sunxi/MAINTAINERS         |  5 +++++
  configs/mixtile_loftq_defconfig | 16 ++++++++++++++++
  2 files changed, 21 insertions(+)

create mode 100644 configs/mixtile_loftq_defconfig

board/sunxi/MAINTAINERS +5 -0

index ef3c937..90a634e 100644
@@ -143,3 +143,8 @@ WEXLER-TAB7200 BOARD
  M:	Aleksei Mamlin <[email protected]>
  S:	Maintained
  F:	configs/Wexler_TAB7200_defconfig
+
+MIXTILE-LOFTQ BOARD
+M:  Phil Han <[email protected]>
+S:  Maintained
+F:  configs/mixtile_loftq_defconfig

configs/mixtile_loftq_defconfig new file +16 -0

new file mode 100644
index 0000000..94ebdc8
@@ -0,0 +1,16 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN6I=y
++S:CONFIG_TARGET_MIXTILE_LOFTQ=y
++S:CONFIG_DRAM_CLK=312
++S:CONFIG_DRAM_ZQ=251
++S:CONFIG_MMC_SUNXI_SLOT=0
++S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+# Wifi power
++S:CONFIG_AXP221_ALDO1_VOLT=3300
+# Vbus gpio for usb1
++S:CONFIG_USB1_VBUS_PIN="PH24"
+# No Vbus gpio for usb2
++S:CONFIG_USB2_VBUS_PIN=""