mc34708 regulators
Hi Steffen,
I see you have added the regulator definitions for the mc34708 to the imx53-qsrb device tree.
However there doesn't seem to be a regulator driver for this PMIC in the tree.
mc13xxx supports parts of the functionalities (like the rtc) but only seems to support mc13783 and mc13892 on the regulator side.
Am I missing something?
Is there a patch floating around for this?
Regards,
Martin
Hi Martin,
Quoted 5 lines · Martin Fuzzey
Hi Steffen,
I see you have added the regulator definitions for the mc34708 to the imx53-qsrb device tree.
Quoted 8 lines
However there doesn't seem to be a regulator driver for this PMIC in the tree.
mc13xxx supports parts of the functionalities (like the rtc) but only seems to support mc13783 and mc13892 on the regulator side.
Am I missing something?
IIRC you are not missing anything. I just took the binding from another patch and added it to the DT as it was there and didn't look like it will be any problem later. And (at least) barebox differentiates the QSB and the QSRB based on the PMIC that is used, because that is the only difference.
Quoted 2 lines
Is there a patch floating around for this?
Not that I know of.
Regards,
Steffen
Signature · 4 lines
Pengutronix e.K. | Steffen Trumtrar | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |