Skip to contentSkip to conversation

clockevents for 4.1 #2

GIT PULL New Daniel Lezcano 2 participants 11 messages Mar 31, 2015 – Apr 1, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

Hi Ingo, Thomas,

this is the second pull request with the different fixes. The sun5i timer conflict is fixed and the function name for arch arm timer is also fixed. So this second pull request contains the following:

- Changed the arch_timer_probed function name to
arch_timer_needs_probe to reflect better the behavior (Laurent Pinchart)

- Used the freq changes notifiers to fix the rate alteration with the
cpufreq driver as this one impacts the sun5i's parent clock (Maxime Ripard)

Thanks !

-- Daniel

The following changes since commit 4806c87f017d8a7003ad34886f58c3b9e023df6a:

clocksource/drivers/at91: Fix IO endianness (2015-03-31 09:15:58 +0200)

are available in the git repository at:

http://git.linaro.org/people/daniel.lezcano/linux.git clockevents/4.1

for you to fetch changes up to 639793eb6552f3f5ce7db93e75aff57c1bad7a6b:

clocksource/drivers/sun5i: Add clock notifiers (2015-03-31 11:50:06
+0200)

----------------------------------------------------------------
Laurent Pinchart (1):
clocksource/drivers/arm_arch_timer: Rename arch_timer_probed to
reflect behaviour

Maxime Ripard (4):
clocksource/drivers/sun5i: Switch to request_irq clocksource/drivers/sun5i: Use of_io_request_and_map clocksource/drivers/sun5i: Refactor the current code clocksource/drivers/sun5i: Add clock notifiers

  drivers/clocksource/arm_arch_timer.c |  13 +++++-----
  drivers/clocksource/timer-sun5i.c    | 302 
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------------------
  2 files changed, 238 insertions(+), 77 deletions(-)
Signature · 5 lines
  <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#1 lore raw

PATCH 1/5 clocksource/drivers/arm_arch_timer: Rename arch_timer_probed to reflect behaviour

From: Laurent Pinchart <[email protected]>

The arch_timer_probed function returns whether the given time doesn't need to be probed. This can be the case when the timer has been probed already, but also when it has no corresponding enabled node in DT.

Rename the function to arch_timer_needs_probe and invert its return value to better reflect the function's purpose and behaviour.

---
 drivers/clocksource/arm_arch_timer.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/clocksource/arm_arch_timer.c +7 -6
index a3025e7..26acfb5 100644
@@ -661,17 +661,17 @@ static const struct of_device_id arch_timer_mem_of_match[] __initconst = {
 };
 
 static bool __init
-arch_timer_probed(int type, const struct of_device_id *matches)
+arch_timer_needs_probe(int type, const struct of_device_id *matches)
 {
 	struct device_node *dn;
-	bool probed = true;
+	bool needs_probe = false;
 
 	dn = of_find_matching_node(NULL, matches);
 	if (dn && of_device_is_available(dn) && !(arch_timers_present & type))
-		probed = false;
+		needs_probe = true;
 	of_node_put(dn);
 
-	return probed;
+	return needs_probe;
 }
 
 static void __init arch_timer_common_init(void)
@@ -680,9 +680,10 @@ static void __init arch_timer_common_init(void)
 
 	/* Wait until both nodes are probed if we have two timers */
 	if ((arch_timers_present & mask) != mask) {
-		if (!arch_timer_probed(ARCH_MEM_TIMER, arch_timer_mem_of_match))
+		if (arch_timer_needs_probe(ARCH_MEM_TIMER,
+					  arch_timer_mem_of_match))
 			return;
-		if (!arch_timer_probed(ARCH_CP15_TIMER, arch_timer_of_match))
+		if (arch_timer_needs_probe(ARCH_CP15_TIMER, arch_timer_of_match))
 			return;
 	}
 
Signature · 1 line
1.9.1
#2 lore raw

PATCH 2/5 clocksource/drivers/sun5i: Switch to request_irq

From: Maxime Ripard <[email protected]>

The current code uses setup_irq, while it could perfectly use the much simpler request_irq. Switch to that.

Conflicts:
drivers/clocksource/timer-sun5i.c

---
 drivers/clocksource/timer-sun5i.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)
drivers/clocksource/timer-sun5i.c +2 -8
index 58597fb..03f04d8 100644
@@ -129,13 +129,6 @@ static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction sun5i_timer_irq = {
-	.name = "sun5i_timer0",
-	.flags = IRQF_TIMER | IRQF_IRQPOLL,
-	.handler = sun5i_timer_interrupt,
-	.dev_id = &sun5i_clockevent,
-};
-
 static void __init sun5i_timer_init(struct device_node *node)
 {
 	struct reset_control *rstc;
@@ -181,7 +174,8 @@ static void __init sun5i_timer_init(struct device_node *node)
 	clockevents_config_and_register(&sun5i_clockevent, rate,
 					TIMER_SYNC_TICKS, 0xffffffff);
 
-	ret = setup_irq(irq, &sun5i_timer_irq);
+	ret = request_irq(irq, sun5i_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			  "sun5i_timer0", &sun5i_clockevent);
 	if (ret)
 		pr_warn("failed to setup irq %d\n", irq);
 }
Signature · 1 line
1.9.1
#3 lore raw

[tip:timers/core] clocksource/drivers/sun5i: Switch to request_irq()

clocksource/drivers/sun5i: Switch to request_irq()
Commit-ID:  5673bc5a863bd4391eab5bb85277f0f1dd1dca50
Gitweb:     http://git.kernel.org/tip/5673bc5a863bd4391eab5bb85277f0f1dd1dca50
Author:     Maxime Ripard <[email protected]>
AuthorDate: Tue, 31 Mar 2015 12:12:23 +0200
Committer:  Ingo Molnar <[email protected]>
CommitDate: Tue, 31 Mar 2015 17:53:57 +0200

clocksource/drivers/sun5i: Switch to request_irq()

The current code uses setup_irq(), while it could perfectly use the much simpler request_irq(). Switch to that.

---
 drivers/clocksource/timer-sun5i.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)
drivers/clocksource/timer-sun5i.c +2 -8
index 58597fb..03f04d8 100644
@@ -129,13 +129,6 @@ static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction sun5i_timer_irq = {
-	.name = "sun5i_timer0",
-	.flags = IRQF_TIMER | IRQF_IRQPOLL,
-	.handler = sun5i_timer_interrupt,
-	.dev_id = &sun5i_clockevent,
-};
-
 static void __init sun5i_timer_init(struct device_node *node)
 {
 	struct reset_control *rstc;
@@ -181,7 +174,8 @@ static void __init sun5i_timer_init(struct device_node *node)
 	clockevents_config_and_register(&sun5i_clockevent, rate,
 					TIMER_SYNC_TICKS, 0xffffffff);
 
-	ret = setup_irq(irq, &sun5i_timer_irq);
+	ret = request_irq(irq, sun5i_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			  "sun5i_timer0", &sun5i_clockevent);
 	if (ret)
 		pr_warn("failed to setup irq %d\n", irq);
 }
#4 lore raw

PATCH 3/5 clocksource/drivers/sun5i: Use of_io_request_and_map

In reply to Daniel Lezcano

From: Maxime Ripard <[email protected]>

of_iomap doesn't do a request_mem_region on the memory area defined in the DT it maps. Switch to of_io_request_and_map to make sure we're the only users.

---
 drivers/clocksource/timer-sun5i.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/clocksource/timer-sun5i.c +2 -1
index 03f04d8..80459b9 100644
@@ -137,7 +137,8 @@ static void __init sun5i_timer_init(struct device_node *node)
 	int ret, irq;
 	u32 val;
 
-	timer_base = of_iomap(node, 0);
+	timer_base = of_io_request_and_map(node, 0,
+					   of_node_full_name(node));
 	if (!timer_base)
 		panic("Can't map registers");
 
Signature · 1 line
1.9.1
#5 lore raw

[tip:timers/core] clocksource/drivers/sun5i: Use of_io_request_and_map()

clocksource/drivers/sun5i: Use of_io_request_and_map()
Commit-ID:  a45860d0ba433c217d359fa2cc2a4984d18ce263
Gitweb:     http://git.kernel.org/tip/a45860d0ba433c217d359fa2cc2a4984d18ce263
Author:     Maxime Ripard <[email protected]>
AuthorDate: Tue, 31 Mar 2015 12:12:24 +0200
Committer:  Ingo Molnar <[email protected]>
CommitDate: Tue, 31 Mar 2015 17:53:58 +0200

clocksource/drivers/sun5i: Use of_io_request_and_map()

of_iomap doesn't do a request_mem_region() on the memory area defined in the DT it maps. Switch to of_io_request_and_map() to make sure we're the only users.

---
 drivers/clocksource/timer-sun5i.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clocksource/timer-sun5i.c +1 -1
index 03f04d8..87f7b81 100644
@@ -137,7 +137,7 @@ static void __init sun5i_timer_init(struct device_node *node)
 	int ret, irq;
 	u32 val;
 
-	timer_base = of_iomap(node, 0);
+	timer_base = of_io_request_and_map(node, 0, of_node_full_name(node));
 	if (!timer_base)
 		panic("Can't map registers");
 
#6 lore raw

PATCH 4/5 clocksource/drivers/sun5i: Refactor the current code

In reply to Daniel Lezcano

From: Maxime Ripard <[email protected]>

Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes.

Conflicts:
drivers/clocksource/timer-sun5i.c

---
 drivers/clocksource/timer-sun5i.c | 231 +++++++++++++++++++++++++++-----------
 1 file changed, 166 insertions(+), 65 deletions(-)
drivers/clocksource/timer-sun5i.c +166 -65
index 80459b9..5a4f820 100644
@@ -17,6 +17,7 @@
 #include <linux/irq.h>
 #include <linux/irqreturn.h>
 #include <linux/reset.h>
+#include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -36,8 +37,27 @@
 
 #define TIMER_SYNC_TICKS	3
 
-static void __iomem *timer_base;
-static u32 ticks_per_jiffy;
+struct sun5i_timer {
+	void __iomem		*base;
+	struct clk		*clk;
+	u32			ticks_per_jiffy;
+};
+
+struct sun5i_timer_clksrc {
+	struct sun5i_timer	timer;
+	struct clocksource	clksrc;
+};
+
+#define to_sun5i_timer_clksrc(x) \
+	container_of(x, struct sun5i_timer_clksrc, clksrc)
+
+struct sun5i_timer_clkevt {
+	struct sun5i_timer		timer;
+	struct clock_event_device	clkevt;
+};
+
+#define to_sun5i_timer_clkevt(x) \
+	container_of(x, struct sun5i_timer_clkevt, clkevt)
 
 /*
  * When we disable a timer, we need to wait at least for 2 cycles of
@@ -45,30 +65,30 @@ static u32 ticks_per_jiffy;
  * that is already setup and runs at the same frequency than the other
  * timers, and we never will be disabled.
  */
-static void sun5i_clkevt_sync(void)
+static void sun5i_clkevt_sync(struct sun5i_timer_clkevt *ce)
 {
-	u32 old = readl(timer_base + TIMER_CNTVAL_LO_REG(1));
+	u32 old = readl(ce->timer.base + TIMER_CNTVAL_LO_REG(1));
 
-	while ((old - readl(timer_base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS)
+	while ((old - readl(ce->timer.base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS)
 		cpu_relax();
 }
 
-static void sun5i_clkevt_time_stop(u8 timer)
+static void sun5i_clkevt_time_stop(struct sun5i_timer_clkevt *ce, u8 timer)
 {
-	u32 val = readl(timer_base + TIMER_CTL_REG(timer));
-	writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer));
+	u32 val = readl(ce->timer.base + TIMER_CTL_REG(timer));
+	writel(val & ~TIMER_CTL_ENABLE, ce->timer.base + TIMER_CTL_REG(timer));
 
-	sun5i_clkevt_sync();
+	sun5i_clkevt_sync(ce);
 }
 
-static void sun5i_clkevt_time_setup(u8 timer, u32 delay)
+static void sun5i_clkevt_time_setup(struct sun5i_timer_clkevt *ce, u8 timer, u32 delay)
 {
-	writel(delay, timer_base + TIMER_INTVAL_LO_REG(timer));
+	writel(delay, ce->timer.base + TIMER_INTVAL_LO_REG(timer));
 }
 
-static void sun5i_clkevt_time_start(u8 timer, bool periodic)
+static void sun5i_clkevt_time_start(struct sun5i_timer_clkevt *ce, u8 timer, bool periodic)
 {
-	u32 val = readl(timer_base + TIMER_CTL_REG(timer));
+	u32 val = readl(ce->timer.base + TIMER_CTL_REG(timer));
 
 	if (periodic)
 		val &= ~TIMER_CTL_ONESHOT;
@@ -76,66 +96,170 @@ static void sun5i_clkevt_time_start(u8 timer, bool periodic)
 		val |= TIMER_CTL_ONESHOT;
 
 	writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
-	       timer_base + TIMER_CTL_REG(timer));
+	       ce->timer.base + TIMER_CTL_REG(timer));
 }
 
 static void sun5i_clkevt_mode(enum clock_event_mode mode,
-			      struct clock_event_device *clk)
+			      struct clock_event_device *clkevt)
 {
+	struct sun5i_timer_clkevt *ce = to_sun5i_timer_clkevt(clkevt);
+
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		sun5i_clkevt_time_stop(0);
-		sun5i_clkevt_time_setup(0, ticks_per_jiffy);
-		sun5i_clkevt_time_start(0, true);
+		sun5i_clkevt_time_stop(ce, 0);
+		sun5i_clkevt_time_setup(ce, 0, ce->timer.ticks_per_jiffy);
+		sun5i_clkevt_time_start(ce, 0, true);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
-		sun5i_clkevt_time_stop(0);
-		sun5i_clkevt_time_start(0, false);
+		sun5i_clkevt_time_stop(ce, 0);
+		sun5i_clkevt_time_start(ce, 0, false);
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	default:
-		sun5i_clkevt_time_stop(0);
+		sun5i_clkevt_time_stop(ce, 0);
 		break;
 	}
 }
 
 static int sun5i_clkevt_next_event(unsigned long evt,
-				   struct clock_event_device *unused)
+				   struct clock_event_device *clkevt)
 {
-	sun5i_clkevt_time_stop(0);
-	sun5i_clkevt_time_setup(0, evt - TIMER_SYNC_TICKS);
-	sun5i_clkevt_time_start(0, false);
+	struct sun5i_timer_clkevt *ce = to_sun5i_timer_clkevt(clkevt);
+
+	sun5i_clkevt_time_stop(ce, 0);
+	sun5i_clkevt_time_setup(ce, 0, evt - TIMER_SYNC_TICKS);
+	sun5i_clkevt_time_start(ce, 0, false);
 
 	return 0;
 }
 
-static struct clock_event_device sun5i_clockevent = {
-	.name = "sun5i_tick",
-	.rating = 340,
-	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode = sun5i_clkevt_mode,
-	.set_next_event = sun5i_clkevt_next_event,
-};
-
-
 static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+	struct sun5i_timer_clkevt *ce = (struct sun5i_timer_clkevt *)dev_id;
 
-	writel(0x1, timer_base + TIMER_IRQ_ST_REG);
-	evt->event_handler(evt);
+	writel(0x1, ce->timer.base + TIMER_IRQ_ST_REG);
+	ce->clkevt.event_handler(&ce->clkevt);
 
 	return IRQ_HANDLED;
 }
 
+static cycle_t sun5i_clksrc_read(struct clocksource *clksrc)
+{
+	struct sun5i_timer_clksrc *cs = to_sun5i_timer_clksrc(clksrc);
+
+	return ~readl(cs->timer.base + TIMER_CNTVAL_LO_REG(1));
+}
+
+static int __init sun5i_setup_clocksource(struct device_node *node,
+					  void __iomem *base,
+					  struct clk *clk, int irq)
+{
+	struct sun5i_timer_clksrc *cs;
+	unsigned long rate;
+	int ret;
+
+	cs = kzalloc(sizeof(*cs), GFP_KERNEL);
+	if (!cs)
+		return -ENOMEM;
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("Couldn't enable parent clock\n");
+		goto err_free;
+	}
+
+	rate = clk_get_rate(clk);
+
+	cs->timer.base = base;
+	cs->timer.clk = clk;
+
+	writel(~0, base + TIMER_INTVAL_LO_REG(1));
+	writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
+	       base + TIMER_CTL_REG(1));
+
+	cs->clksrc.name = node->name;
+	cs->clksrc.rating = 340;
+	cs->clksrc.read = sun5i_clksrc_read;
+	cs->clksrc.mask = CLOCKSOURCE_MASK(32);
+	cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+	ret = clocksource_register_hz(&cs->clksrc, rate);
+	if (ret) {
+		pr_err("Couldn't register clock source.\n");
+		goto err_disable_clk;
+	}
+
+	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(clk);
+err_free:
+	kfree(cs);
+	return ret;
+}
+
+static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem *base,
+					 struct clk *clk, int irq)
+{
+	struct sun5i_timer_clkevt *ce;
+	unsigned long rate;
+	int ret;
+	u32 val;
+
+	ce = kzalloc(sizeof(*ce), GFP_KERNEL);
+	if (!ce)
+		return -ENOMEM;
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("Couldn't enable parent clock\n");
+		goto err_free;
+	}
+
+	rate = clk_get_rate(clk);
+
+	ce->timer.base = base;
+	ce->timer.ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
+	ce->timer.clk = clk;
+
+	ce->clkevt.name = node->name;
+	ce->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	ce->clkevt.set_next_event = sun5i_clkevt_next_event;
+	ce->clkevt.set_mode = sun5i_clkevt_mode;
+	ce->clkevt.rating = 340;
+	ce->clkevt.irq = irq;
+	ce->clkevt.cpumask = cpu_possible_mask;
+
+	/* Enable timer0 interrupt */
+	val = readl(base + TIMER_IRQ_EN_REG);
+	writel(val | TIMER_IRQ_EN(0), base + TIMER_IRQ_EN_REG);
+
+	clockevents_config_and_register(&ce->clkevt, rate,
+					TIMER_SYNC_TICKS, 0xffffffff);
+
+	ret = request_irq(irq, sun5i_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			  "sun5i_timer0", ce);
+	if (ret) {
+		pr_err("Unable to register interrupt\n");
+		goto err_disable_clk;
+	}
+
+	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(clk);
+err_free:
+	kfree(ce);
+	return ret;
+}
+
 static void __init sun5i_timer_init(struct device_node *node)
 {
 	struct reset_control *rstc;
-	unsigned long rate;
+	void __iomem *timer_base;
 	struct clk *clk;
-	int ret, irq;
-	u32 val;
+	int irq;
 
 	timer_base = of_io_request_and_map(node, 0,
 					   of_node_full_name(node));
@@ -149,36 +273,13 @@ static void __init sun5i_timer_init(struct device_node *node)
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk))
 		panic("Can't get timer clock");
-	clk_prepare_enable(clk);
-	rate = clk_get_rate(clk);
 
 	rstc = of_reset_control_get(node, NULL);
 	if (!IS_ERR(rstc))
 		reset_control_deassert(rstc);
 
-	writel(~0, timer_base + TIMER_INTVAL_LO_REG(1));
-	writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
-	       timer_base + TIMER_CTL_REG(1));
-
-	clocksource_mmio_init(timer_base + TIMER_CNTVAL_LO_REG(1), node->name,
-			      rate, 340, 32, clocksource_mmio_readl_down);
-
-	ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
-
-	/* Enable timer0 interrupt */
-	val = readl(timer_base + TIMER_IRQ_EN_REG);
-	writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
-
-	sun5i_clockevent.cpumask = cpu_possible_mask;
-	sun5i_clockevent.irq = irq;
-
-	clockevents_config_and_register(&sun5i_clockevent, rate,
-					TIMER_SYNC_TICKS, 0xffffffff);
-
-	ret = request_irq(irq, sun5i_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
-			  "sun5i_timer0", &sun5i_clockevent);
-	if (ret)
-		pr_warn("failed to setup irq %d\n", irq);
+	sun5i_setup_clocksource(node, timer_base, clk, irq);
+	sun5i_setup_clockevent(node, timer_base, clk, irq);
 }
 CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer",
 		       sun5i_timer_init);
Signature · 1 line
1.9.1
#7 lore raw

[tip:timers/core] clocksource/drivers/sun5i: Refactor the current code

clocksource/drivers/sun5i: Refactor the current code
Commit-ID:  4a59058f0b09682200c04b1db236b4a3b92128d7
Gitweb:     http://git.kernel.org/tip/4a59058f0b09682200c04b1db236b4a3b92128d7
Author:     Maxime Ripard <[email protected]>
AuthorDate: Tue, 31 Mar 2015 12:12:25 +0200
Committer:  Ingo Molnar <[email protected]>
CommitDate: Tue, 31 Mar 2015 17:53:58 +0200

clocksource/drivers/sun5i: Refactor the current code

Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes.

---
 drivers/clocksource/timer-sun5i.c | 231 +++++++++++++++++++++++++++-----------
 1 file changed, 166 insertions(+), 65 deletions(-)
drivers/clocksource/timer-sun5i.c +166 -65
index 87f7b81..2330090 100644
@@ -17,6 +17,7 @@
 #include <linux/irq.h>
 #include <linux/irqreturn.h>
 #include <linux/reset.h>
+#include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -36,8 +37,27 @@
 
 #define TIMER_SYNC_TICKS	3
 
-static void __iomem *timer_base;
-static u32 ticks_per_jiffy;
+struct sun5i_timer {
+	void __iomem		*base;
+	struct clk		*clk;
+	u32			ticks_per_jiffy;
+};
+
+struct sun5i_timer_clksrc {
+	struct sun5i_timer	timer;
+	struct clocksource	clksrc;
+};
+
+#define to_sun5i_timer_clksrc(x) \
+	container_of(x, struct sun5i_timer_clksrc, clksrc)
+
+struct sun5i_timer_clkevt {
+	struct sun5i_timer		timer;
+	struct clock_event_device	clkevt;
+};
+
+#define to_sun5i_timer_clkevt(x) \
+	container_of(x, struct sun5i_timer_clkevt, clkevt)
 
 /*
  * When we disable a timer, we need to wait at least for 2 cycles of
@@ -45,30 +65,30 @@ static u32 ticks_per_jiffy;
  * that is already setup and runs at the same frequency than the other
  * timers, and we never will be disabled.
  */
-static void sun5i_clkevt_sync(void)
+static void sun5i_clkevt_sync(struct sun5i_timer_clkevt *ce)
 {
-	u32 old = readl(timer_base + TIMER_CNTVAL_LO_REG(1));
+	u32 old = readl(ce->timer.base + TIMER_CNTVAL_LO_REG(1));
 
-	while ((old - readl(timer_base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS)
+	while ((old - readl(ce->timer.base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS)
 		cpu_relax();
 }
 
-static void sun5i_clkevt_time_stop(u8 timer)
+static void sun5i_clkevt_time_stop(struct sun5i_timer_clkevt *ce, u8 timer)
 {
-	u32 val = readl(timer_base + TIMER_CTL_REG(timer));
-	writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer));
+	u32 val = readl(ce->timer.base + TIMER_CTL_REG(timer));
+	writel(val & ~TIMER_CTL_ENABLE, ce->timer.base + TIMER_CTL_REG(timer));
 
-	sun5i_clkevt_sync();
+	sun5i_clkevt_sync(ce);
 }
 
-static void sun5i_clkevt_time_setup(u8 timer, u32 delay)
+static void sun5i_clkevt_time_setup(struct sun5i_timer_clkevt *ce, u8 timer, u32 delay)
 {
-	writel(delay, timer_base + TIMER_INTVAL_LO_REG(timer));
+	writel(delay, ce->timer.base + TIMER_INTVAL_LO_REG(timer));
 }
 
-static void sun5i_clkevt_time_start(u8 timer, bool periodic)
+static void sun5i_clkevt_time_start(struct sun5i_timer_clkevt *ce, u8 timer, bool periodic)
 {
-	u32 val = readl(timer_base + TIMER_CTL_REG(timer));
+	u32 val = readl(ce->timer.base + TIMER_CTL_REG(timer));
 
 	if (periodic)
 		val &= ~TIMER_CTL_ONESHOT;
@@ -76,66 +96,170 @@ static void sun5i_clkevt_time_start(u8 timer, bool periodic)
 		val |= TIMER_CTL_ONESHOT;
 
 	writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
-	       timer_base + TIMER_CTL_REG(timer));
+	       ce->timer.base + TIMER_CTL_REG(timer));
 }
 
 static void sun5i_clkevt_mode(enum clock_event_mode mode,
-			      struct clock_event_device *clk)
+			      struct clock_event_device *clkevt)
 {
+	struct sun5i_timer_clkevt *ce = to_sun5i_timer_clkevt(clkevt);
+
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		sun5i_clkevt_time_stop(0);
-		sun5i_clkevt_time_setup(0, ticks_per_jiffy);
-		sun5i_clkevt_time_start(0, true);
+		sun5i_clkevt_time_stop(ce, 0);
+		sun5i_clkevt_time_setup(ce, 0, ce->timer.ticks_per_jiffy);
+		sun5i_clkevt_time_start(ce, 0, true);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
-		sun5i_clkevt_time_stop(0);
-		sun5i_clkevt_time_start(0, false);
+		sun5i_clkevt_time_stop(ce, 0);
+		sun5i_clkevt_time_start(ce, 0, false);
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	default:
-		sun5i_clkevt_time_stop(0);
+		sun5i_clkevt_time_stop(ce, 0);
 		break;
 	}
 }
 
 static int sun5i_clkevt_next_event(unsigned long evt,
-				   struct clock_event_device *unused)
+				   struct clock_event_device *clkevt)
 {
-	sun5i_clkevt_time_stop(0);
-	sun5i_clkevt_time_setup(0, evt - TIMER_SYNC_TICKS);
-	sun5i_clkevt_time_start(0, false);
+	struct sun5i_timer_clkevt *ce = to_sun5i_timer_clkevt(clkevt);
+
+	sun5i_clkevt_time_stop(ce, 0);
+	sun5i_clkevt_time_setup(ce, 0, evt - TIMER_SYNC_TICKS);
+	sun5i_clkevt_time_start(ce, 0, false);
 
 	return 0;
 }
 
-static struct clock_event_device sun5i_clockevent = {
-	.name = "sun5i_tick",
-	.rating = 340,
-	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode = sun5i_clkevt_mode,
-	.set_next_event = sun5i_clkevt_next_event,
-};
-
-
 static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+	struct sun5i_timer_clkevt *ce = (struct sun5i_timer_clkevt *)dev_id;
 
-	writel(0x1, timer_base + TIMER_IRQ_ST_REG);
-	evt->event_handler(evt);
+	writel(0x1, ce->timer.base + TIMER_IRQ_ST_REG);
+	ce->clkevt.event_handler(&ce->clkevt);
 
 	return IRQ_HANDLED;
 }
 
+static cycle_t sun5i_clksrc_read(struct clocksource *clksrc)
+{
+	struct sun5i_timer_clksrc *cs = to_sun5i_timer_clksrc(clksrc);
+
+	return ~readl(cs->timer.base + TIMER_CNTVAL_LO_REG(1));
+}
+
+static int __init sun5i_setup_clocksource(struct device_node *node,
+					  void __iomem *base,
+					  struct clk *clk, int irq)
+{
+	struct sun5i_timer_clksrc *cs;
+	unsigned long rate;
+	int ret;
+
+	cs = kzalloc(sizeof(*cs), GFP_KERNEL);
+	if (!cs)
+		return -ENOMEM;
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("Couldn't enable parent clock\n");
+		goto err_free;
+	}
+
+	rate = clk_get_rate(clk);
+
+	cs->timer.base = base;
+	cs->timer.clk = clk;
+
+	writel(~0, base + TIMER_INTVAL_LO_REG(1));
+	writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
+	       base + TIMER_CTL_REG(1));
+
+	cs->clksrc.name = node->name;
+	cs->clksrc.rating = 340;
+	cs->clksrc.read = sun5i_clksrc_read;
+	cs->clksrc.mask = CLOCKSOURCE_MASK(32);
+	cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+	ret = clocksource_register_hz(&cs->clksrc, rate);
+	if (ret) {
+		pr_err("Couldn't register clock source.\n");
+		goto err_disable_clk;
+	}
+
+	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(clk);
+err_free:
+	kfree(cs);
+	return ret;
+}
+
+static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem *base,
+					 struct clk *clk, int irq)
+{
+	struct sun5i_timer_clkevt *ce;
+	unsigned long rate;
+	int ret;
+	u32 val;
+
+	ce = kzalloc(sizeof(*ce), GFP_KERNEL);
+	if (!ce)
+		return -ENOMEM;
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("Couldn't enable parent clock\n");
+		goto err_free;
+	}
+
+	rate = clk_get_rate(clk);
+
+	ce->timer.base = base;
+	ce->timer.ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
+	ce->timer.clk = clk;
+
+	ce->clkevt.name = node->name;
+	ce->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	ce->clkevt.set_next_event = sun5i_clkevt_next_event;
+	ce->clkevt.set_mode = sun5i_clkevt_mode;
+	ce->clkevt.rating = 340;
+	ce->clkevt.irq = irq;
+	ce->clkevt.cpumask = cpu_possible_mask;
+
+	/* Enable timer0 interrupt */
+	val = readl(base + TIMER_IRQ_EN_REG);
+	writel(val | TIMER_IRQ_EN(0), base + TIMER_IRQ_EN_REG);
+
+	clockevents_config_and_register(&ce->clkevt, rate,
+					TIMER_SYNC_TICKS, 0xffffffff);
+
+	ret = request_irq(irq, sun5i_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			  "sun5i_timer0", ce);
+	if (ret) {
+		pr_err("Unable to register interrupt\n");
+		goto err_disable_clk;
+	}
+
+	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(clk);
+err_free:
+	kfree(ce);
+	return ret;
+}
+
 static void __init sun5i_timer_init(struct device_node *node)
 {
 	struct reset_control *rstc;
-	unsigned long rate;
+	void __iomem *timer_base;
 	struct clk *clk;
-	int ret, irq;
-	u32 val;
+	int irq;
 
 	timer_base = of_io_request_and_map(node, 0, of_node_full_name(node));
 	if (!timer_base)
@@ -148,36 +272,13 @@ static void __init sun5i_timer_init(struct device_node *node)
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk))
 		panic("Can't get timer clock");
-	clk_prepare_enable(clk);
-	rate = clk_get_rate(clk);
 
 	rstc = of_reset_control_get(node, NULL);
 	if (!IS_ERR(rstc))
 		reset_control_deassert(rstc);
 
-	writel(~0, timer_base + TIMER_INTVAL_LO_REG(1));
-	writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
-	       timer_base + TIMER_CTL_REG(1));
-
-	clocksource_mmio_init(timer_base + TIMER_CNTVAL_LO_REG(1), node->name,
-			      rate, 340, 32, clocksource_mmio_readl_down);
-
-	ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
-
-	/* Enable timer0 interrupt */
-	val = readl(timer_base + TIMER_IRQ_EN_REG);
-	writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
-
-	sun5i_clockevent.cpumask = cpu_possible_mask;
-	sun5i_clockevent.irq = irq;
-
-	clockevents_config_and_register(&sun5i_clockevent, rate,
-					TIMER_SYNC_TICKS, 0xffffffff);
-
-	ret = request_irq(irq, sun5i_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
-			  "sun5i_timer0", &sun5i_clockevent);
-	if (ret)
-		pr_warn("failed to setup irq %d\n", irq);
+	sun5i_setup_clocksource(node, timer_base, clk, irq);
+	sun5i_setup_clockevent(node, timer_base, clk, irq);
 }
 CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer",
 		       sun5i_timer_init);
#8 lore raw

PATCH 5/5 clocksource/drivers/sun5i: Add clock notifiers

In reply to Daniel Lezcano

From: Maxime Ripard <[email protected]>

The parent clock of the sun5i timer is the AHB clock, which rate might change because of other devices requirements.

This is for example the case on the Allwinner A31, where the DMA controller needs a minimum rate higher than the default, that is enforced after the timer driver has probed.

Add clock notifiers to make sure we reflect the clock rate changes in the timer rates.

---
 drivers/clocksource/timer-sun5i.c | 68 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 66 insertions(+), 2 deletions(-)
drivers/clocksource/timer-sun5i.c +66 -2
index 5a4f820..18616e6 100644
@@ -40,9 +40,13 @@
 struct sun5i_timer {
 	void __iomem		*base;
 	struct clk		*clk;
+	struct notifier_block	clk_rate_cb;
 	u32			ticks_per_jiffy;
 };
 
+#define to_sun5i_timer(x) \
+	container_of(x, struct sun5i_timer, clk_rate_cb)
+
 struct sun5i_timer_clksrc {
 	struct sun5i_timer	timer;
 	struct clocksource	clksrc;
@@ -151,6 +155,30 @@ static cycle_t sun5i_clksrc_read(struct clocksource *clksrc)
 	return ~readl(cs->timer.base + TIMER_CNTVAL_LO_REG(1));
 }
 
+static int sun5i_rate_cb_clksrc(struct notifier_block *nb,
+				unsigned long event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct sun5i_timer *timer = to_sun5i_timer(nb);
+	struct sun5i_timer_clksrc *cs = container_of(timer,
+						     struct sun5i_timer_clksrc, timer);
+
+	switch (event) {
+	case PRE_RATE_CHANGE:
+		clocksource_unregister(&cs->clksrc);
+		break;
+
+	case POST_RATE_CHANGE:
+		clocksource_register_hz(&cs->clksrc, ndata->new_rate);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
 static int __init sun5i_setup_clocksource(struct device_node *node,
 					  void __iomem *base,
 					  struct clk *clk, int irq)
@@ -173,6 +201,14 @@ static int __init sun5i_setup_clocksource(struct device_node *node,
 
 	cs->timer.base = base;
 	cs->timer.clk = clk;
+	cs->timer.clk_rate_cb.notifier_call = sun5i_rate_cb_clksrc;
+	cs->timer.clk_rate_cb.next = NULL;
+
+	ret = clk_notifier_register(clk, &cs->timer.clk_rate_cb);
+	if (ret) {
+		pr_err("Unable to register clock notifier.\n");
+		goto err_disable_clk;
+	}
 
 	writel(~0, base + TIMER_INTVAL_LO_REG(1));
 	writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
@@ -187,11 +223,13 @@ static int __init sun5i_setup_clocksource(struct device_node *node,
 	ret = clocksource_register_hz(&cs->clksrc, rate);
 	if (ret) {
 		pr_err("Couldn't register clock source.\n");
-		goto err_disable_clk;
+		goto err_remove_notifier;
 	}
 
 	return 0;
 
+err_remove_notifier:
+	clk_notifier_unregister(clk, &cs->timer.clk_rate_cb);
 err_disable_clk:
 	clk_disable_unprepare(clk);
 err_free:
@@ -199,6 +237,22 @@ err_free:
 	return ret;
 }
 
+static int sun5i_rate_cb_clkevt(struct notifier_block *nb,
+				unsigned long event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct sun5i_timer *timer = to_sun5i_timer(nb);
+	struct sun5i_timer_clkevt *ce = container_of(timer,
+						     struct sun5i_timer_clkevt, timer);
+
+	if (event == POST_RATE_CHANGE) {
+		clockevents_update_freq(&ce->clkevt, ndata->new_rate);
+		ce->timer.ticks_per_jiffy = DIV_ROUND_UP(ndata->new_rate, HZ);
+	}
+
+	return NOTIFY_DONE;
+}
+
 static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem *base,
 					 struct clk *clk, int irq)
 {
@@ -222,6 +276,14 @@ static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem
 	ce->timer.base = base;
 	ce->timer.ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
 	ce->timer.clk = clk;
+	ce->timer.clk_rate_cb.notifier_call = sun5i_rate_cb_clkevt;
+	ce->timer.clk_rate_cb.next = NULL;
+
+	ret = clk_notifier_register(clk, &ce->timer.clk_rate_cb);
+	if (ret) {
+		pr_err("Unable to register clock notifier.\n");
+		goto err_disable_clk;
+	}
 
 	ce->clkevt.name = node->name;
 	ce->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
@@ -242,11 +304,13 @@ static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem
 			  "sun5i_timer0", ce);
 	if (ret) {
 		pr_err("Unable to register interrupt\n");
-		goto err_disable_clk;
+		goto err_remove_notifier;
 	}
 
 	return 0;
 
+err_remove_notifier:
+	clk_notifier_unregister(clk, &ce->timer.clk_rate_cb);
 err_disable_clk:
 	clk_disable_unprepare(clk);
 err_free:
Signature · 1 line
1.9.1
#9 lore raw

[tip:timers/core] clocksource/drivers/sun5i: Add clock notifiers

clocksource/drivers/sun5i: Add clock notifiers
Commit-ID:  3071efa466b30636bf958f3d13bc808e03105cd8
Gitweb:     http://git.kernel.org/tip/3071efa466b30636bf958f3d13bc808e03105cd8
Author:     Maxime Ripard <[email protected]>
AuthorDate: Tue, 31 Mar 2015 12:12:26 +0200
Committer:  Ingo Molnar <[email protected]>
CommitDate: Tue, 31 Mar 2015 17:53:58 +0200

clocksource/drivers/sun5i: Add clock notifiers

The parent clock of the sun5i timer is the AHB clock, which rate might change because of other devices requirements.

This is for example the case on the Allwinner A31, where the DMA controller needs a minimum rate higher than the default, that is enforced after the timer driver has probed.

Add clock notifiers to make sure we reflect the clock rate changes in the timer rates.

---
 drivers/clocksource/timer-sun5i.c | 66 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 64 insertions(+), 2 deletions(-)
drivers/clocksource/timer-sun5i.c +64 -2
index 2330090..28aa4b7 100644
@@ -40,9 +40,13 @@
 struct sun5i_timer {
 	void __iomem		*base;
 	struct clk		*clk;
+	struct notifier_block	clk_rate_cb;
 	u32			ticks_per_jiffy;
 };
 
+#define to_sun5i_timer(x) \
+	container_of(x, struct sun5i_timer, clk_rate_cb)
+
 struct sun5i_timer_clksrc {
 	struct sun5i_timer	timer;
 	struct clocksource	clksrc;
@@ -151,6 +155,29 @@ static cycle_t sun5i_clksrc_read(struct clocksource *clksrc)
 	return ~readl(cs->timer.base + TIMER_CNTVAL_LO_REG(1));
 }
 
+static int sun5i_rate_cb_clksrc(struct notifier_block *nb,
+				unsigned long event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct sun5i_timer *timer = to_sun5i_timer(nb);
+	struct sun5i_timer_clksrc *cs = container_of(timer, struct sun5i_timer_clksrc, timer);
+
+	switch (event) {
+	case PRE_RATE_CHANGE:
+		clocksource_unregister(&cs->clksrc);
+		break;
+
+	case POST_RATE_CHANGE:
+		clocksource_register_hz(&cs->clksrc, ndata->new_rate);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
 static int __init sun5i_setup_clocksource(struct device_node *node,
 					  void __iomem *base,
 					  struct clk *clk, int irq)
@@ -173,6 +200,14 @@ static int __init sun5i_setup_clocksource(struct device_node *node,
 
 	cs->timer.base = base;
 	cs->timer.clk = clk;
+	cs->timer.clk_rate_cb.notifier_call = sun5i_rate_cb_clksrc;
+	cs->timer.clk_rate_cb.next = NULL;
+
+	ret = clk_notifier_register(clk, &cs->timer.clk_rate_cb);
+	if (ret) {
+		pr_err("Unable to register clock notifier.\n");
+		goto err_disable_clk;
+	}
 
 	writel(~0, base + TIMER_INTVAL_LO_REG(1));
 	writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
@@ -187,11 +222,13 @@ static int __init sun5i_setup_clocksource(struct device_node *node,
 	ret = clocksource_register_hz(&cs->clksrc, rate);
 	if (ret) {
 		pr_err("Couldn't register clock source.\n");
-		goto err_disable_clk;
+		goto err_remove_notifier;
 	}
 
 	return 0;
 
+err_remove_notifier:
+	clk_notifier_unregister(clk, &cs->timer.clk_rate_cb);
 err_disable_clk:
 	clk_disable_unprepare(clk);
 err_free:
@@ -199,6 +236,21 @@ err_free:
 	return ret;
 }
 
+static int sun5i_rate_cb_clkevt(struct notifier_block *nb,
+				unsigned long event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct sun5i_timer *timer = to_sun5i_timer(nb);
+	struct sun5i_timer_clkevt *ce = container_of(timer, struct sun5i_timer_clkevt, timer);
+
+	if (event == POST_RATE_CHANGE) {
+		clockevents_update_freq(&ce->clkevt, ndata->new_rate);
+		ce->timer.ticks_per_jiffy = DIV_ROUND_UP(ndata->new_rate, HZ);
+	}
+
+	return NOTIFY_DONE;
+}
+
 static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem *base,
 					 struct clk *clk, int irq)
 {
@@ -222,6 +274,14 @@ static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem
 	ce->timer.base = base;
 	ce->timer.ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
 	ce->timer.clk = clk;
+	ce->timer.clk_rate_cb.notifier_call = sun5i_rate_cb_clkevt;
+	ce->timer.clk_rate_cb.next = NULL;
+
+	ret = clk_notifier_register(clk, &ce->timer.clk_rate_cb);
+	if (ret) {
+		pr_err("Unable to register clock notifier.\n");
+		goto err_disable_clk;
+	}
 
 	ce->clkevt.name = node->name;
 	ce->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
@@ -242,11 +302,13 @@ static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem
 			  "sun5i_timer0", ce);
 	if (ret) {
 		pr_err("Unable to register interrupt\n");
-		goto err_disable_clk;
+		goto err_remove_notifier;
 	}
 
 	return 0;
 
+err_remove_notifier:
+	clk_notifier_unregister(clk, &ce->timer.clk_rate_cb);
 err_disable_clk:
 	clk_disable_unprepare(clk);
 err_free:
#10 lore raw

[tip:timers/core] clocksource/drivers/arm_arch_timer: Rename ' arch_timer_probed()' to 'arch_timer_needs_probing()' to reflect behaviour

In reply to Daniel Lezcano
clocksource/drivers/arm_arch_timer: Rename 'arch_timer_probed()' to 'arch_timer_needs_probing()' to reflect behaviour
Commit-ID:  566e6dfad580a55084c29fe3e887c7273b16fc6a
Gitweb:     http://git.kernel.org/tip/566e6dfad580a55084c29fe3e887c7273b16fc6a
Author:     Laurent Pinchart <[email protected]>
AuthorDate: Tue, 31 Mar 2015 12:12:22 +0200
Committer:  Ingo Molnar <[email protected]>
CommitDate: Tue, 31 Mar 2015 17:53:57 +0200

clocksource/drivers/arm_arch_timer: Rename 'arch_timer_probed()' to 'arch_timer_needs_probing()' to reflect behaviour

The arch_timer_probed() function returns whether the given time doesn't need to be probed. This can be the case when the timer has been probed already, but also when it has no corresponding enabled node in DT.

Rename the function to arch_timer_needs_probing() and invert its return value to better reflect the function's purpose and behaviour.

---
 drivers/clocksource/arm_arch_timer.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/clocksource/arm_arch_timer.c +6 -6
index a3025e7..2664696 100644
@@ -661,17 +661,17 @@ static const struct of_device_id arch_timer_mem_of_match[] __initconst = {
 };
 
 static bool __init
-arch_timer_probed(int type, const struct of_device_id *matches)
+arch_timer_needs_probing(int type, const struct of_device_id *matches)
 {
 	struct device_node *dn;
-	bool probed = true;
+	bool needs_probing = false;
 
 	dn = of_find_matching_node(NULL, matches);
 	if (dn && of_device_is_available(dn) && !(arch_timers_present & type))
-		probed = false;
+		needs_probing = true;
 	of_node_put(dn);
 
-	return probed;
+	return needs_probing;
 }
 
 static void __init arch_timer_common_init(void)
@@ -680,9 +680,9 @@ static void __init arch_timer_common_init(void)
 
 	/* Wait until both nodes are probed if we have two timers */
 	if ((arch_timers_present & mask) != mask) {
-		if (!arch_timer_probed(ARCH_MEM_TIMER, arch_timer_mem_of_match))
+		if (arch_timer_needs_probing(ARCH_MEM_TIMER, arch_timer_mem_of_match))
 			return;
-		if (!arch_timer_probed(ARCH_CP15_TIMER, arch_timer_of_match))
+		if (arch_timer_needs_probing(ARCH_CP15_TIMER, arch_timer_of_match))
 			return;
 	}