Skip to contentSkip to conversation

Samsung arm64 DT updates for v4.1

GIT PULL Kukjin Kim 2 participants 3 messages Apr 1, 2015 – Apr 4, 2015 Arm Samsung Exynos

lore
Share & tools
lore

Kukjin Kim

author
#0 lore raw

The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:

Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/samsung-dt-64

for you to fetch changes up to 423c716151e254e42650ad78b30c2cd782c6f654:

arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
02:13:43 +0900)

----------------------------------------------------------------
Samsung arm64 DT updates for v4.1

- add new SoC for arm64 based exynos5433 SoC
: exynos5433 - Octa cores for big.LITTLE architecture (Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)

: added thermal-zones, TMU sensor and I2S dt nodes : added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes : added pinctrl, HS-I2C, Serial and basic system dt nodes

----------------------------------------------------------------
Chanwoo Choi (6):
arm64: dts: Add dts files for 64-bit Exynos5433 SoC
arm64: dts: Add SPI/PDMA dt node for exynos5433
arm64: dts: Add PMU dt node for exynos5433
arm64: dts: Add RTC and ADC dt node for exynos5433
arm64: dts: Add TMU sensor dt node for exynos5433
arm64: dts: Add thermal-zones dt node for exynos5433

Inha Song (2):
arm64: dts: Add ADMA dt node for exynos5433
arm64: dts: Add I2S dt node for exynos5433

Jaehoon Chung (1):
arm64: dts: Add MSHC dt node for exynos5433

 .../devicetree/bindings/arm/samsung/pmu.txt        |   1 +
 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++
 .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi     |  22 +
 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi     | 231 +++++
 arch/arm64/boot/dts/exynos/exynos5433.dtsi         | 931
+++++++++++++++++++++
 5 files changed, 1883 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
 create mode 100644
arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi
#1 lore raw
Quoted 41 lines · Kukjin Kim

The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:

Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/samsung-dt-64

for you to fetch changes up to 423c716151e254e42650ad78b30c2cd782c6f654:

arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
02:13:43 +0900)

----------------------------------------------------------------
Samsung arm64 DT updates for v4.1

- add new SoC for arm64 based exynos5433 SoC
: exynos5433 - Octa cores for big.LITTLE architecture (Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)

: added thermal-zones, TMU sensor and I2S dt nodes : added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes : added pinctrl, HS-I2C, Serial and basic system dt nodes

----------------------------------------------------------------
Chanwoo Choi (6):
arm64: dts: Add dts files for 64-bit Exynos5433 SoC
arm64: dts: Add SPI/PDMA dt node for exynos5433
arm64: dts: Add PMU dt node for exynos5433
arm64: dts: Add RTC and ADC dt node for exynos5433
arm64: dts: Add TMU sensor dt node for exynos5433
arm64: dts: Add thermal-zones dt node for exynos5433

Inha Song (2):
arm64: dts: Add ADMA dt node for exynos5433
arm64: dts: Add I2S dt node for exynos5433

Jaehoon Chung (1):
arm64: dts: Add MSHC dt node for exynos5433

Quoted 12 lines
 .../devicetree/bindings/arm/samsung/pmu.txt        |   1 +
 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++
 .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi     |  22 +
 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi     | 231 +++++
 arch/arm64/boot/dts/exynos/exynos5433.dtsi         | 931
+++++++++++++++++++++
 5 files changed, 1883 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
 create mode 100644
arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi

How do you even build these dts files? How did you test this branch before you sent it to us?

Not merged.

-Olof

author
#2 lore raw
Quoted 44 lines · Olof Johansson
Quoted 42 lines · Kukjin Kim

The following changes since commit c517d838eb7d07bbe9507871fab3931deccff539:

Linux 4.0-rc1 (2015-02-22 18:21:14 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/samsung-dt-64

for you to fetch changes up to 423c716151e254e42650ad78b30c2cd782c6f654:

arm64: dts: Add thermal-zones dt node for exynos5433 (2015-03-27
02:13:43 +0900)

----------------------------------------------------------------
Samsung arm64 DT updates for v4.1

- add new SoC for arm64 based exynos5433 SoC
: exynos5433 - Octa cores for big.LITTLE architecture (Quad Cortex-A57 big and Quad Cortex-A53 LITTLE cores)

: added thermal-zones, TMU sensor and I2S dt nodes : added ADMA, RTC, ADC, PMU, SPI/PDMA and MSHC dt nodes : added pinctrl, HS-I2C, Serial and basic system dt nodes

----------------------------------------------------------------
Chanwoo Choi (6):
arm64: dts: Add dts files for 64-bit Exynos5433 SoC
arm64: dts: Add SPI/PDMA dt node for exynos5433
arm64: dts: Add PMU dt node for exynos5433
arm64: dts: Add RTC and ADC dt node for exynos5433
arm64: dts: Add TMU sensor dt node for exynos5433
arm64: dts: Add thermal-zones dt node for exynos5433

Inha Song (2):
arm64: dts: Add ADMA dt node for exynos5433
arm64: dts: Add I2S dt node for exynos5433

Jaehoon Chung (1):
arm64: dts: Add MSHC dt node for exynos5433

Quoted 13 lines
Quoted 4 lines
 .../devicetree/bindings/arm/samsung/pmu.txt        |   1 +
 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++
 .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi     |  22 +
 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi     | 231 +++++
Quoted 8 lines
 arch/arm64/boot/dts/exynos/exynos5433.dtsi         | 931
+++++++++++++++++++++
 5 files changed, 1883 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
 create mode 100644
arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi

+ Chanwoo, Mike

Hi Olof,

Thanks for your taking other pull-requests :-)

Quoted 3 lines

How do you even build these dts files? How did you test this branch before you sent it to us?

Yeah, your pointing out is exact. In my side, I've tested with 1) creating exynos5433-smdk5433 board dt file and 2) adding ARCH_EXYNOS5433 config in arch/arm64 and 3) including 5433 related clk tree, actually in linux-next. Sorry for missing the explaining in my pull-request.

For 1), I've talked to Chanwoo about that and he is not ready to post its board dt now and I want actual board dt for mass product would be better in mainline. Maybe need some time...

For 2), we can add regarding updates for exynos-64 Kconfig/Makefile including Arnd's suggestion to collapse all exynos-64 config entries in arm64/Kconfig _later_, because current the exynos5433 dt has a dependency with 1) and clk tree to support exynos5433 SoC.

For 3), same as For 2). Additionally as you know tipically arm-soc and clk trees could have dependencies when new SoC supporting is added.

Quoted 2 lines

Not merged.

Yeah, I agreed why you didn't. In this case, how do you think about adding support new SoC then adding board dt including above changes later?

Thanks,
Kukjin