mx53loco: Disable printing cpuinfo
PATCH 1/1 mx53loco: Disable printing cpuinfo
Since commit 32df39c741788e ("mx5: fix get_reset_cause") we have the following boot messages on a mx53qsb:
U-Boot 2015.04-rc5-00029-gd68df02 (Apr 06 2015 - 11:15:39)
CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: POR Board: MX53 LOCO I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial CPU: Freescale i.MX53 rev2.1 at 1000 MHz Reset cause: unknown reset Net: FEC [PRIME]
The CPU and Reset cause lines appear twice.
Initially mx53 boots at 800MHz, then at a later point the PMIC is configured via I2C to raise the CPU voltage so that it can run at 1GHz.
To avoid such misleading double printings, disable printing cpu info for now.
--- board/freescale/mx53loco/mx53loco.c | 1 - include/configs/mx53loco.h | 2 -- 2 files changed, 3 deletions(-)
board/freescale/mx53loco/mx53loco.c +0 -1
@@ -389,7 +389,6 @@ int board_late_init(void) {if (!power_init ())clock_1GHz (); -print_cpuinfo ();return 0 ; }
include/configs/mx53loco.h +0 -2
@@ -24,8 +24,6 @@#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DISPLAY_CPUINFO -/* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
Signature · 1 line
1.9.1
PATCH 1/1 mx53loco: Disable printing cpuinfo
Quoted 27 lines
-----Original Message-----
From: Fabio Estevam [mailto:fabio.estevam at freescale.com]
Sent: Monday, April 06, 2015 10:23 PM
To: sbabic at denx.de
Cc: Liu Hui-R64343; u-boot at lists.denx.de; Estevam Fabio-R49496
Subject: [PATCH] mx53loco: Disable printing cpuinfoSince commit
32df39c741788e("mx5: fixget_reset_cause") we have the following boot messages on a mx53qsb:U-Boot 2015.04-rc5-00029-gd68df02 (Apr 06 2015 - 11:15:39)
CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: POR Board: MX53 LOCO I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial CPU: Freescale i.MX53 rev2.1 at 1000 MHz Reset cause: unknown reset Net: FEC [PRIME]The CPU and Reset cause lines appear twice.
Quoted 7 lines
Initially mx53 boots at 800MHz, then at a later point the PMIC is configured via I2C to raise the CPU voltage so that it can run at 1GHz.
To avoid such misleading double printings, disable printing cpu info for now.
Signed-off-by Fabio Estevam <[email protected]>
Quoted 32 lines
--- board/freescale/mx53loco/mx53loco.c | 1 - include/configs/mx53loco.h | 2 -- 2 files changed, 3 deletions(-)board/freescale/mx53loco/mx53loco.c +0
-1@@ -389,7 +389,6 @@ int board_late_init(void) {if (!power_init ())clock_1GHz (); -print_cpuinfo ();return 0 ; }include/configs/mx53loco.h +0
-3@@ -24,8 +24,6 @@#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DISPLAY_CPUINFO -/* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) --1.9.1
PATCH 1/1 mx53loco: Disable printing cpuinfo
Tom/Stefano,
Quoted 30 lines · Hui.Liu at freescale.com
Quoted 30 lines
-----Original Message-----
From: Fabio Estevam [mailto:fabio.estevam at freescale.com]
Sent: Monday, April 06, 2015 10:23 PM
To: sbabic at denx.de
Cc: Liu Hui-R64343; u-boot at lists.denx.de; Estevam Fabio-R49496
Subject: [PATCH] mx53loco: Disable printing cpuinfoSince commit
32df39c741788e("mx5: fixget_reset_cause") we have the following boot messages on a mx53qsb:U-Boot 2015.04-rc5-00029-gd68df02 (Apr 06 2015 - 11:15:39)
CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: POR Board: MX53 LOCO I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial CPU: Freescale i.MX53 rev2.1 at 1000 MHz Reset cause: unknown reset Net: FEC [PRIME]The CPU and Reset cause lines appear twice.
Initially mx53 boots at 800MHz, then at a later point the PMIC is configured via I2C to raise the CPU voltage so that it can run at 1GHz.
Quoted 6 lines
Quoted 4 lines
To avoid such misleading double printings, disable printing cpu info for now.
Signed-off-by Fabio Estevam <[email protected]>Acked-by Jason Liu <[email protected]>
Can we have this one applied for 2015.04? It fixes some bogus boot logs.
Thanks,
Fabio Estevam
PATCH 1/1 mx53loco: Disable printing cpuinfo
Hi Fabio,
Quoted 10 lines · Fabio Estevam
Tom/Stefano,
On Tue, Apr 7, 2015 at 12:46 AM, Hui.Liu at freescale.com
Quoted 3 lines
Quoted 1 line
Signed-off-by Fabio Estevam <[email protected]>Acked-by Jason Liu <[email protected]>Can we have this one applied for 2015.04? It fixes some bogus boot logs.
I pick it up now.
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 1/1 mx53loco: Disable printing cpuinfo
In reply to Fabio EstevamQuoted 20 lines · Fabio Estevam
Since commit
32df39c741788e("mx5: fixget_reset_cause") we have the following boot messages on a mx53qsb:U-Boot 2015.04-rc5-00029-gd68df02 (Apr 06 2015 - 11:15:39)
CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: POR Board: MX53 LOCO I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial CPU: Freescale i.MX53 rev2.1 at 1000 MHz Reset cause: unknown reset Net: FEC [PRIME]The CPU and Reset cause lines appear twice.
Quoted 7 lines
Initially mx53 boots at 800MHz, then at a later point the PMIC is configured via I2C to raise the CPU voltage so that it can run at 1GHz.
To avoid such misleading double printings, disable printing cpu info for now.
Signed-off-by Fabio Estevam <[email protected]>---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================