Skip to contentSkip to conversation

Getting bad MIC when trying ath10k + ath9k IBSS with RSN

DISCUSSION Ben Greear 2 participants 3 messages Apr 8, 2015 – Apr 9, 2015 3 messages not in the archive Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore

Ben Greear

author
#0 lore raw

I have been hacking on ath10k driver and firmware in attempt to enable IBSS + RSN.

Currently, I see message 1/4 in both directions, but the ath9k wpa_supplicant always reports 2/4 from ath10k station as having bad MIC (and AC supplicant dumps core shortly after when there is an EAPOL timeout, I haven't looked into the core yet, but unlikely to be directly related to bad MIC I think since ath9k <-> ath9k works fine).

Almost certainly this is some bug in ath10k and/or the firmware, but if someone has some suggestions as to what it might be or how to debug it further, I would appreciate the help!

Network capture and supplicant logs are found here:

https://www.candelatech.com/downloads/tmp/

Thanks,
Ben

Signature · 8 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#4 lore raw

[re-adding ath10k, sorry for removing it]

Quoted 12 lines · Ben Greear

On 04/08/2015 07:53 AM, Ben Greear wrote:
Ok, the EAPOL seems to work now, as long as I restart both supplicants before I try to connect.

It appears now that there is something wrong with setting the keys. The firmware appears to get a real key, and then shortly after, the keys are removed and encryption is disabled.

The supplicant log is below. I believe the crucial part is this. Any idea why this would be failing? (I'll poke in the kernel tomorrow to try to find the reason as well...)

Quoted 11 lines

1428534417.236258: wpa_driver_nl80211_set_key: ifindex=131 (wlan0) alg=3 addr=0x2344900 key_idx=1 set_tx=0 seq_len=6 key_len=16 1428534417.236273: nl80211: KEY_DATA - hexdump(len=16): a5 28 f3 02 e9 cb a4 de 87 01 a4 9c c9 d2 a8 89 1428534417.236298: nl80211: KEY_SEQ - hexdump(len=6): 00 00 00 00 00 00
1428534417.236311: addr=00:0e:8e:3e:8b:96
1428534417.236319: RSN IBSS RX GTK
1428534417.236355: nl80211: set_key failed; err=-22 Invalid argument)
1428534417.236367: wlan0: WPA: Failed to set GTK to the driver (alg=3 keylen=16 keyidx=1) 1428534417.236376: wlan0: RSN: Failed to install GTK
1428534417.236385: wlan0: RSN: Failed to configure GTK
1428534417.236393: SUPP: supp_deauthenticate (TODO)
1428534417.236419: l2_packet_receive: src=00:0e:8e:3e:8b:96 len=99

I see this failure with drivers that do not support IBSS-RSN... Otherwise, this request must succeed.

The only difference between AP mode and IBSS mode is that in IBSS mode, each peer have their own GTK, so you have to program a per-sta GTK for decryption.

But GTK is for multicast frames, and I already made broken IBSS-RSN networks with drivers that do not support IBSS-RSN, because the PTK was still programmed correctly. You just have a network that can only pass unicast traffic. Your PTK was programmed correctly:

1428534380.576614: AUTH: set_key - key - hexdump(len=16): 99 76 89 40 b3 61 28 4f 60 2c 4b 75 72 6b 4e e8
1428534380.576645: wpa_driver_nl80211_set_key: ifindex=131 (wlan0) alg=3 addr=0x23490f0 key_idx=0 set_tx=1 seq_len=6 key_len=16 1428534380.576657: nl80211: KEY_DATA - hexdump(len=16): 99 76 89 40 b3 61 28 4f 60 2c 4b 75 72 6b 4e e8
1428534380.576668: nl80211: KEY_SEQ - hexdump(len=6): 00 00 00 00 00 00
1428534380.576677: addr=00:0e:8e:3e:8b:96
1428534380.577056: nl80211: Set STA flags - ifname=wlan0 addr=00:0e:8e:3e:8b:96 total_flags=0x1 flags_or=0x1 flags_and=0xffffffff authorized=1
1428534380.577108: AUTH: 00:0e:8e:3e:8b:96 authorizing port

However, there are other problems in your log:

1) There are two NL80211_CMD_JOIN_IBSS events from the kernel, for only one join request.

2) wpa_supplicant sent a authentication frame at 1428534380.167582 and never got any tx_status response from the kernel. This was before the second NL80211_CMD_JOIN_IBSS event.

Loosing a authentication frame is normally no big deal. It often happens. They are even stations that do not support them. If i remember the logic that i implemented in wpa_supplicant, you consider the other station as authenticated if you receive an authentication response or an authentication request, or after a timeout.

3) But this timeout seems buggy: after completing the EAPOL exchange, this timer fires:

1428534381.168652: RSN: Timeout on waiting Authentication frame response from 00:0e:8e:3e:8b:96 - start authenticator

This timer shouldn't even be present. And even if it did, it shouldn't start the authenticator as it is already started. I didn't track the latest changes in wpa_supplicant's IBSS-RSN support, but this seems wrong.

But it restart the authenticator anyway, which clears the PTK:

1428534381.168693: AUTH: auth_set_key(alg=0 addr=00:0e:8e:3e:8b:96 key_idx=0)
1428534381.168703: AUTH: set_key - key - hexdump(len=0): [NULL] 1428534381.168737: wpa_driver_nl80211_set_key: ifindex=131 (wlan0) alg=0 addr=0x2344bb0 key_idx=0 set_tx=1 seq_len=6 key_len=0 1428534381.168751: nl80211: KEY_SEQ - hexdump(len=6): 00 00 00 00 00 00
1428534381.168761: addr=00:0e:8e:3e:8b:96

And mark the station as unauthorized:

1428534381.169266: nl80211: Set STA flags - ifname=wlan0 addr=00:0e:8e:3e:8b:96 total_flags=0x0 flags_or=0x0 flags_and=0xfffffffe authorized=0
1428534381.169347: AUTH: 00:0e:8e:3e:8b:96 unauthorizing port

After that, it retries an EAPOL exchange which basically fail: the remote station still have an encrypted session, and the logic in wpa_supplicant is that you can only reset a encryption session by sending an authentication frame.

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

author
#5 lore raw
Quoted 27 lines · Nicolas Cavallari

[re-adding ath10k, sorry for removing it]

Quoted 12 lines · Ben Greear

On 04/08/2015 07:53 AM, Ben Greear wrote:
Ok, the EAPOL seems to work now, as long as I restart both supplicants before I try to connect.

It appears now that there is something wrong with setting the keys. The firmware appears to get a real key, and then shortly after, the keys are removed and encryption is disabled.

The supplicant log is below. I believe the crucial part is this. Any idea why this would be failing? (I'll poke in the kernel tomorrow to try to find the reason as well...)

Quoted 11 lines

1428534417.236258: wpa_driver_nl80211_set_key: ifindex=131 (wlan0) alg=3 addr=0x2344900 key_idx=1 set_tx=0 seq_len=6 key_len=16 1428534417.236273: nl80211: KEY_DATA - hexdump(len=16): a5 28 f3 02 e9 cb a4 de 87 01 a4 9c c9 d2 a8 89 1428534417.236298: nl80211: KEY_SEQ - hexdump(len=6): 00 00 00 00 00 00
1428534417.236311: addr=00:0e:8e:3e:8b:96
1428534417.236319: RSN IBSS RX GTK
1428534417.236355: nl80211: set_key failed; err=-22 Invalid argument)
1428534417.236367: wlan0: WPA: Failed to set GTK to the driver (alg=3 keylen=16 keyidx=1) 1428534417.236376: wlan0: RSN: Failed to install GTK
1428534417.236385: wlan0: RSN: Failed to configure GTK
1428534417.236393: SUPP: supp_deauthenticate (TODO)
1428534417.236419: l2_packet_receive: src=00:0e:8e:3e:8b:96 len=99

Quoted 2 lines

I see this failure with drivers that do not support IBSS-RSN... Otherwise, this request must succeed.

Yeah, I thought I had applied Januz's patch to enable this in ath10k, but I had not.

With that enabled, the system tries to do encrypted traffic, but it looks like the unicast frames from ath10k are corrupted.

Quoted 42 lines

However, there are other problems in your log:

1) There are two NL80211_CMD_JOIN_IBSS events from the kernel, for only one join request.

2) wpa_supplicant sent a authentication frame at 1428534380.167582 and never got any tx_status response from the kernel. This was before the second NL80211_CMD_JOIN_IBSS event.

Loosing a authentication frame is normally no big deal. It often happens. They are even stations that do not support them. If i remember the logic that i implemented in wpa_supplicant, you consider the other station as authenticated if you receive an authentication response or an authentication request, or after a timeout.

3) But this timeout seems buggy: after completing the EAPOL exchange, this timer fires:

1428534381.168652: RSN: Timeout on waiting Authentication frame response from 00:0e:8e:3e:8b:96 - start authenticator

This timer shouldn't even be present. And even if it did, it shouldn't start the authenticator as it is already started. I didn't track the latest changes in wpa_supplicant's IBSS-RSN support, but this seems wrong.

But it restart the authenticator anyway, which clears the PTK:

1428534381.168693: AUTH: auth_set_key(alg=0 addr=00:0e:8e:3e:8b:96 key_idx=0)
1428534381.168703: AUTH: set_key - key - hexdump(len=0): [NULL] 1428534381.168737: wpa_driver_nl80211_set_key: ifindex=131 (wlan0) alg=0 addr=0x2344bb0 key_idx=0 set_tx=1 seq_len=6 key_len=0 1428534381.168751: nl80211: KEY_SEQ - hexdump(len=6): 00 00 00 00 00 00
1428534381.168761: addr=00:0e:8e:3e:8b:96

And mark the station as unauthorized:

1428534381.169266: nl80211: Set STA flags - ifname=wlan0 addr=00:0e:8e:3e:8b:96 total_flags=0x0 flags_or=0x0 flags_and=0xfffffffe authorized=0
1428534381.169347: AUTH: 00:0e:8e:3e:8b:96 unauthorizing port

Quoted 4 lines

After that, it retries an EAPOL exchange which basically fail: the remote station still have an encrypted session, and the logic in wpa_supplicant is that you can only reset a encryption session by sending an authentication frame.

Ok, this is probably why I have to restart supplicant on each side when I try to make the stations associate.

I think I'll look at this later, since now my stations are staying authenticated long enough to do some traffic tests at least.

Thanks,
Ben

Signature · 8 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k