Problem installing nfs-utils to non standard dir
Subsystems (2)
Hi!
I'm trying to build nfs from source. I'm using nfs-utils-1.3.2 from http://sourceforge.net/projects/nfs/files/nfs-utils/1.3.2/.
I configure using the following command
./configure --prefix=/home/username/installs/tmp
--exec-prefix=/home/username/installs/tmp
When i run "make install" most of the packages are put under /home/username/installs/tmp, but for some reason the install script tries to put osd_login under /sbin, which results in an error:
Making install in osd_login
make[2]: Entering directory
`/home/username/installs/nfs-utils-1.3.2/utils/osd_login'
make[3]: Entering directory
`/home/username/installs/nfs-utils-1.3.2/utils/osd_login'
/usr/bin/mkdir -p '/sbin'
/usr/bin/install -c osd_login '/sbin' /usr/bin/install: cannot remove ‘/sbin/osd_login’: Permission
denied
make[3]: *** [install-dist_sbinSCRIPTS] Error 1
This is not supposed to happen, is it? Is there an easy way to fix it? I get the same error trying to build nfs-utils-1.3.1 as well.
Cheers,
Eino
Quoted 18 lines · Eino Juhani Oltedal
Hi!
I'm trying to build nfs from source. I'm using nfs-utils-1.3.2 from http://sourceforge.net/projects/nfs/files/nfs-utils/1.3.2/.
I configure using the following command./configure --prefix=/home/username/installs/tmp --exec-prefix=/home/username/installs/tmpWhen i run "make install" most of the packages are put under
/home/username/installs/tmp, but for some reason the install script tries to putosd_loginunder /sbin, which results in an error:Making install in
osd_login
make[2]: Entering directory/home/username/installs/nfs-utils-1.3.2/utils/osd_login' make[3]: Entering directory/home/username/installs/nfs-utils-1.3.2/utils/osd_login'
/usr/bin/mkdir-p '/sbin'
/usr/bin/install-cosd_login'/sbin'
/usr/bin/install: cannot remove ‘/sbin/osd_login’: Permission denied make[3]: *** [install-dist_sbinSCRIPTS] Error 1
Quoted 1 line
This is not supposed to happen, is it?
No, it is.
There are three utils (mount.nfs/mount.nfs4, nfsdcltrack and osd_login) must be installed in directory /sbin/, they are hard-coded.
Quoted 1 line
Is there an easy way to fix it? I get the same error trying to build nfs-utils-1.3.1 as well.
No, they are must installed in /sbin/ for kernel module nfsd.ko needing /sbin/nfsdcltrack and objlayoutdriver.ko needing /sbin/osd_login.
You can not skip this problem with recently source.
if you are hurry, you can avoid this problem with the following patch and configure as,
# ./configure --disable-mount --disable-nfsdcltrack --disable-osdlogin --prefix=/root/test --exec-prefix=/root/test/
Ps: It is just a draft made by diff. I will send some patches for this problem.
thanks,
Kinglong Mee
===================================================================
configure.ac +9 -2
@@ -213,9 +213,16 @@ fi AC_ARG_ENABLE(nfsdcltrack, [AC_HELP_STRING([--disable-nfsdcltrack], [disable NFSv4 clientid tracking programs @<:@default=no@:>@])], - enable_nfsdctrack=$enableval, + enable_nfsdcltrack=$enableval, enable_nfsdcltrack="yes") +AC_ARG_ENABLE(osdlogin, + [AC_HELP_STRING([--disable-osdlogin], + [disable osd_login scripts @<:@default=no@:>@])], + enable_osdlogin=$enableval, + enable_osdlogin="yes") + AM_CONDITIONAL(CONFIG_OSD_LOGIN, [test "$enable_osdlogin" = "yes" ]) + dnl Check for TI-RPC library and headers AC_LIBTIRPC
@@ -346,7 +353,7 @@ AC_SUBST(LIBBSD) AC_SUBST(LIBBLKID) AC_SUBST(LIBDL) -if test "$enable_libmount" != no; then +if test "$enable_libmount" = yes; then AC_CHECK_LIB(mount, mnt_context_do_mount, [LIBMOUNT="-lmount"], AC_MSG_ERROR([libmount needed])) AC_CHECK_HEADER(libmount/libmount.h, , AC_MSG_ERROR([Cannot find libmount header file libmount/libmount.h])) fi
utils/Makefile.am +4 -1
@@ -25,6 +25,10 @@ if CONFIG_NFSDCLTRACK OPTDIRS += nfsdcltrack endif +if CONFIG_OSD_LOGIN +OPTDIRS += osd_login +endif + SUBDIRS = \ exportfs \ mountd \
@@ -32,7 +36,6 @@ SUBDIRS = \ nfsstat \ showmount \ statd \ - osd_login \ $(OPTDIRS) MAINTAINERCLEANFILES = Makefile.in
Thank you for the help. I was able to avoid the error by using make DESTDIR=${HOME}/installs/arm instead of the prefix. Then i copied everything under ${HOME}/installs/arm over to the root of the ARM file-system.
However when trying to use the newly built nfs I get some errors:
mount -t nfs 192.168.0.104:/test /mnt
mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd. mount.nfs: an incorrect mount option was specified
mount -t nfs -o nolock 192.168.0.104:/test /mnt
mount.nfs: Protocol not supported
showmount also gives an error:
showmount -e 192.168.0.104
clnt_create: RPC: Unknown protocol
I compiled nfs using this command:
cd ~/installs/util-linux-2.26.1
./configure --host=arm-linux-gnueabihf --build=x86_64-linux
--disable-gss --disable-nfsv4 CC=arm-linux-gnueabihf-gcc CPPFLAGS="-I${HOME}/installs/arm/include, -I${HOME}/installs/arm/usr/include" LDFLAGS="-L${HOME}/installs/arm/lib/, -L${HOME}/installs/arm/usr/lib/"
make
make DESTDIR=${HOME}/installs/arm installI compiled the dependencies libblkid and libtirpc with the following commands:
cd ~/installs/util-linux-2.26.1
./configure --host=arm-linux-gnueabihf --disable-all-programs
--enable-libblkid --build=x86_64-linux CC=arm-linux-gnueabihf-gcc
make
make DESTDIR=${HOME}/installs/arm install
cd ~/installs/libtirpc-0.2.5
./configure --host=arm-linux-gnueabihf --build=x86_64-linux
--disable-gssapi CC=arm-linux-gnueabihf-gcc
make
make DESTDIR=${HOME}/installs/arm installHere is my build file tree:
$HOME/installs/arm
├── bin
├── lib
│ ├── libblkid.so.1 -> libblkid.so.1.1.0
│ └── libblkid.so.1.1.0
├── sbin
│ ├── mount.nfs
│ ├── mount.nfs4 -> mount.nfs
│ ├── osd_login
│ ├── umount.nfs -> mount.nfs
│ └── umount.nfs4 -> mount.nfs
├── usr
│ ├── bin
│ ├── etc
│ │ └── netconfig
│ ├── include
│ │ ├── blkid
│ │ │ └── blkid.h
│ │ └── tirpc
│ │ ├── netconfig.h
│ │ ├── rpc
│ │ │ ├── auth_des.h
│ │ │ ├── auth_gss.h
│ │ │ ├── auth.h
│ │ │ ├── auth_kerb.h
│ │ │ ├── auth_unix.h
│ │ │ ├── clnt.h
│ │ │ ├── clnt_soc.h
│ │ │ ├── clnt_stat.h
│ │ │ ├── des_crypt.h
│ │ │ ├── des.h
│ │ │ ├── nettype.h
│ │ │ ├── pmap_clnt.h
│ │ │ ├── pmap_prot.h
│ │ │ ├── pmap_rmt.h
│ │ │ ├── raw.h
│ │ │ ├── rpcb_clnt.h
│ │ │ ├── rpcb_prot.h
│ │ │ ├── rpcb_prot.x
│ │ │ ├── rpc_com.h
│ │ │ ├── rpcent.h
│ │ │ ├── rpc.h
│ │ │ ├── rpc_msg.h
│ │ │ ├── svc_auth.h
│ │ │ ├── svc_dg.h
│ │ │ ├── svc.h
│ │ │ ├── svc_soc.h
│ │ │ ├── types.h
│ │ │ └── xdr.h
│ │ └── rpcsvc
│ │ ├── crypt.h
│ │ └── crypt.x
│ ├── lib
│ │ ├── libblkid.a
│ │ ├── libblkid.la
│ │ ├── libblkid.so -> ../../lib/libblkid.so.1.1.0
│ │ ├── libtirpc.a
│ │ ├── libtirpc.la
│ │ ├── libtirpc.so -> libtirpc.so.1.0.10
│ │ ├── libtirpc.so.1 -> libtirpc.so.1.0.10
│ │ ├── libtirpc.so.1.0.10
│ │ ├── pkgconfig
│ │ │ ├── blkid.pc
│ │ │ └── libtirpc.pc
│ │ └── systemd
│ │ └── system
│ ├── sbin
│ │ ├── exportfs
│ │ ├── mountstats
│ │ ├── nfsiostat
│ │ ├── nfsstat
│ │ ├── rpcdebug
│ │ ├── rpc.mountd
│ │ ├── rpc.nfsd
│ │ ├── rpc.statd
│ │ ├── showmount
│ │ ├── sm-notify
│ │ └── start-statd
│ └── share
│ ├── bash-completion
│ │ └── completions
│ ├── locale
│ │ ├── ca
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── cs
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── da
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── de
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── es
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── et
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── eu
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── fi
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── fr
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── gl
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── hr
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── hu
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── id
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── it
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── ja
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── nl
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── pl
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── pt_BR
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── ru
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── sl
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── sv
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── tr
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── uk
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── vi
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ ├── zh_CN
│ │ │ └── LC_MESSAGES
│ │ │ └── util-linux.mo
│ │ └── zh_TW
│ │ └── LC_MESSAGES
│ │ └── util-linux.mo
│ └── man
│ ├── man1
│ ├── man3
│ │ ├── bindresvport.3t
│ │ ├── des_crypt.3t
│ │ ├── getnetconfig.3t
│ │ ├── getnetpath.3t
│ │ ├── getrpcent.3t
│ │ ├── getrpcport.3t
│ │ ├── libblkid.3
│ │ ├── rpc.3t
│ │ ├── rpcbind.3t
│ │ ├── rpc_clnt_auth.3t
│ │ ├── rpc_clnt_calls.3t
│ │ ├── rpc_clnt_create.3t
│ │ ├── rpc_secure.3t
│ │ ├── rpc_soc.3t
│ │ ├── rpc_svc_calls.3t
│ │ ├── rpc_svc_create.3t
│ │ ├── rpc_svc_err.3t
│ │ ├── rpc_svc_reg.3t
│ │ ├── rpc_xdr.3t
│ │ └── rtime.3t
│ ├── man5
│ │ ├── exports.5
│ │ ├── netconfig.5
│ │ ├── nfs.5
│ │ ├── nfsmount.conf.5
│ │ └── terminal-colors.d.5
│ ├── man7
│ │ └── nfsd.7
│ └── man8
│ ├── exportfs.8
│ ├── mountd.8
│ ├── mount.nfs.8
│ ├── mountstats.8
│ ├── nfsd.8
│ ├── nfsiostat.8
│ ├── nfsstat.8
│ ├── rpcdebug.8
│ ├── rpc.mountd.8 -> mountd.8
│ ├── rpc.nfsd.8 -> nfsd.8
│ ├── rpc.sm-notify.8 -> sm-notify.8
│ ├── rpc.statd.8 -> statd.8
│ ├── showmount.8
│ ├── sm-notify.8
│ ├── statd.8
│ └── umount.nfs.8
└── var
└── lib
└── nfs
├── etab
├── rmtab
├── sm
├── sm.bak
├── state
└── xtabDo you have any idea what's missing? Maybe some dependencies?
Cheers,
Eino
Quoted 93 lines · Kinglong Mee
Quoted 18 lines · Eino Juhani Oltedal
Hi!
I'm trying to build nfs from source. I'm using nfs-utils-1.3.2 from http://sourceforge.net/projects/nfs/files/nfs-utils/1.3.2/.
I configure using the following command./configure --prefix=/home/username/installs/tmp --exec-prefix=/home/username/installs/tmpWhen i run "make install" most of the packages are put under
/home/username/installs/tmp, but for some reason the install script tries to putosd_loginunder /sbin, which results in an error:Making install in
osd_login
make[2]: Entering directory/home/username/installs/nfs-utils-1.3.2/utils/osd_login' make[3]: Entering directory/home/username/installs/nfs-utils-1.3.2/utils/osd_login'
/usr/bin/mkdir-p '/sbin'
/usr/bin/install-cosd_login'/sbin'
/usr/bin/install: cannot remove ‘/sbin/osd_login’: Permission denied make[3]: *** [install-dist_sbinSCRIPTS] Error 1Quoted 1 line
This is not supposed to happen, is it?
No, it is.
There are three utils (mount.nfs/mount.nfs4, nfsdcltrack andosd_login) must be installed in directory/sbin/, they are hard-coded.Quoted 1 line
Is there an easy way to fix it? I get the same error trying to build nfs-utils-1.3.1 as well.
No, they are must installed in
/sbin/for kernel module nfsd.ko needing/sbin/nfsdcltrackand objlayoutdriver.ko needing/sbin/osd_login.You can not skip this problem with recently source.
if you are hurry, you can avoid this problem with the following patch and configure as,# ./configure --disable-mount --disable-nfsdcltrack --disable-osdlogin --prefix=/root/test --exec-prefix=/root/test/Ps: It is just a draft made by diff. I will send some patches for this problem.
thanks,
Kinglong Mee===================================================================
configure.ac +9
-2@@ -213,9 +213,16 @@ fi AC_ARG_ENABLE(nfsdcltrack, [AC_HELP_STRING([--disable-nfsdcltrack], [disable NFSv4 clientid tracking programs @<:@default=no@:>@])], - enable_nfsdctrack=$enableval, + enable_nfsdcltrack=$enableval, enable_nfsdcltrack="yes") +AC_ARG_ENABLE(osdlogin, + [AC_HELP_STRING([--disable-osdlogin], + [disable osd_login scripts @<:@default=no@:>@])], + enable_osdlogin=$enableval, + enable_osdlogin="yes") + AM_CONDITIONAL(CONFIG_OSD_LOGIN, [test "$enable_osdlogin" = "yes" ]) + dnl Check for TI-RPC library and headers AC_LIBTIRPC@@ -346,7 +353,7 @@ AC_SUBST(LIBBSD) AC_SUBST(LIBBLKID) AC_SUBST(LIBDL) -if test "$enable_libmount" != no; then +if test "$enable_libmount" = yes; then AC_CHECK_LIB(mount, mnt_context_do_mount, [LIBMOUNT="-lmount"], AC_MSG_ERROR([libmount needed])) AC_CHECK_HEADER(libmount/libmount.h, , AC_MSG_ERROR([Cannot find libmount header file libmount/libmount.h])) fiutils/Makefile.am +4
-1@@ -25,6 +25,10 @@ if CONFIG_NFSDCLTRACK OPTDIRS += nfsdcltrack endif +if CONFIG_OSD_LOGIN +OPTDIRS += osd_login +endif + SUBDIRS = \ exportfs \ mountd \@@ -32,7 +36,6 @@ SUBDIRS = \ nfsstat \ showmount \ statd \ - osd_login \ $(OPTDIRS) MAINTAINERCLEANFILES = Makefile.in
Quoted 11 lines · Eino Juhani Oltedal
Thank you for the help. I was able to avoid the error by using make DESTDIR=${HOME}/installs/arm instead of the prefix. Then i copied everything under ${HOME}/installs/arm over to the root of the ARM file-system.
However when trying to use the newly built nfs I get some errors:
mount -t nfs 192.168.0.104:/test /mnt
mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd. mount.nfs: an incorrect mount option was specified
Quoted 7 lines
mount -t nfs -o nolock 192.168.0.104:/test /mnt
mount.nfs: Protocol not supportedshowmount also gives an error:
showmount -e 192.168.0.104
clnt_create: RPC: Unknown protocol
Can you show me the rpcinfo messages, and exports entry?
# rpcinfo -p # cat /etc/exports # exportfs
thanks
Kinglong Mee
Quoted 337 lines
I compiled nfs using this command:
cd ~/installs/util-linux-2.26.1 ./configure --host=arm-linux-gnueabihf --build=x86_64-linux --disable-gss --disable-nfsv4 CC=arm-linux-gnueabihf-gcc CPPFLAGS="-I${HOME}/installs/arm/include, -I${HOME}/installs/arm/usr/include" LDFLAGS="-L${HOME}/installs/arm/lib/, -L${HOME}/installs/arm/usr/lib/" make make DESTDIR=${HOME}/installs/arm installI compiled the dependencies libblkid and libtirpc with the following commands:
cd ~/installs/util-linux-2.26.1 ./configure --host=arm-linux-gnueabihf --disable-all-programs --enable-libblkid --build=x86_64-linux CC=arm-linux-gnueabihf-gcc make make DESTDIR=${HOME}/installs/arm install cd ~/installs/libtirpc-0.2.5 ./configure --host=arm-linux-gnueabihf --build=x86_64-linux --disable-gssapi CC=arm-linux-gnueabihf-gcc make make DESTDIR=${HOME}/installs/arm installHere is my build file tree:
$HOME/installs/arm
├── bin ├── lib │ ├── libblkid.so.1 -> libblkid.so.1.1.0 │ └── libblkid.so.1.1.0 ├── sbin │ ├── mount.nfs │ ├── mount.nfs4 -> mount.nfs │ ├── osd_login │ ├── umount.nfs -> mount.nfs │ └── umount.nfs4 -> mount.nfs ├── usr │ ├── bin │ ├── etc │ │ └── netconfig │ ├── include │ │ ├── blkid │ │ │ └── blkid.h │ │ └── tirpc │ │ ├── netconfig.h │ │ ├── rpc │ │ │ ├── auth_des.h │ │ │ ├── auth_gss.h │ │ │ ├── auth.h │ │ │ ├── auth_kerb.h │ │ │ ├── auth_unix.h │ │ │ ├── clnt.h │ │ │ ├── clnt_soc.h │ │ │ ├── clnt_stat.h │ │ │ ├── des_crypt.h │ │ │ ├── des.h │ │ │ ├── nettype.h │ │ │ ├── pmap_clnt.h │ │ │ ├── pmap_prot.h │ │ │ ├── pmap_rmt.h │ │ │ ├── raw.h │ │ │ ├── rpcb_clnt.h │ │ │ ├── rpcb_prot.h │ │ │ ├── rpcb_prot.x │ │ │ ├── rpc_com.h │ │ │ ├── rpcent.h │ │ │ ├── rpc.h │ │ │ ├── rpc_msg.h │ │ │ ├── svc_auth.h │ │ │ ├── svc_dg.h │ │ │ ├── svc.h │ │ │ ├── svc_soc.h │ │ │ ├── types.h │ │ │ └── xdr.h │ │ └── rpcsvc │ │ ├── crypt.h │ │ └── crypt.x │ ├── lib │ │ ├── libblkid.a │ │ ├── libblkid.la │ │ ├── libblkid.so -> ../../lib/libblkid.so.1.1.0 │ │ ├── libtirpc.a │ │ ├── libtirpc.la │ │ ├── libtirpc.so -> libtirpc.so.1.0.10 │ │ ├── libtirpc.so.1 -> libtirpc.so.1.0.10 │ │ ├── libtirpc.so.1.0.10 │ │ ├── pkgconfig │ │ │ ├── blkid.pc │ │ │ └── libtirpc.pc │ │ └── systemd │ │ └── system │ ├── sbin │ │ ├── exportfs │ │ ├── mountstats │ │ ├── nfsiostat │ │ ├── nfsstat │ │ ├── rpcdebug │ │ ├── rpc.mountd │ │ ├── rpc.nfsd │ │ ├── rpc.statd │ │ ├── showmount │ │ ├── sm-notify │ │ └── start-statd │ └── share │ ├── bash-completion │ │ └── completions │ ├── locale │ │ ├── ca │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── cs │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── da │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── de │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── es │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── et │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── eu │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── fi │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── fr │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── gl │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── hr │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── hu │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── id │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── it │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── ja │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── nl │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── pl │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── pt_BR │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── ru │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── sl │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── sv │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── tr │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── uk │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── vi │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── zh_CN │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ └── zh_TW │ │ └── LC_MESSAGES │ │ └── util-linux.mo │ └── man │ ├── man1 │ ├── man3 │ │ ├── bindresvport.3t │ │ ├── des_crypt.3t │ │ ├── getnetconfig.3t │ │ ├── getnetpath.3t │ │ ├── getrpcent.3t │ │ ├── getrpcport.3t │ │ ├── libblkid.3 │ │ ├── rpc.3t │ │ ├── rpcbind.3t │ │ ├── rpc_clnt_auth.3t │ │ ├── rpc_clnt_calls.3t │ │ ├── rpc_clnt_create.3t │ │ ├── rpc_secure.3t │ │ ├── rpc_soc.3t │ │ ├── rpc_svc_calls.3t │ │ ├── rpc_svc_create.3t │ │ ├── rpc_svc_err.3t │ │ ├── rpc_svc_reg.3t │ │ ├── rpc_xdr.3t │ │ └── rtime.3t │ ├── man5 │ │ ├── exports.5 │ │ ├── netconfig.5 │ │ ├── nfs.5 │ │ ├── nfsmount.conf.5 │ │ └── terminal-colors.d.5 │ ├── man7 │ │ └── nfsd.7 │ └── man8 │ ├── exportfs.8 │ ├── mountd.8 │ ├── mount.nfs.8 │ ├── mountstats.8 │ ├── nfsd.8 │ ├── nfsiostat.8 │ ├── nfsstat.8 │ ├── rpcdebug.8 │ ├── rpc.mountd.8 -> mountd.8 │ ├── rpc.nfsd.8 -> nfsd.8 │ ├── rpc.sm-notify.8 -> sm-notify.8 │ ├── rpc.statd.8 -> statd.8 │ ├── showmount.8 │ ├── sm-notify.8 │ ├── statd.8 │ └── umount.nfs.8 └── var └── lib └── nfs ├── etab ├── rmtab ├── sm ├── sm.bak ├── state └── xtabDo you have any idea what's missing? Maybe some dependencies?
Cheers,
EinoQuoted 88 lines · Kinglong Mee
Quoted 18 lines · Eino Juhani Oltedal
Hi!
I'm trying to build nfs from source. I'm using nfs-utils-1.3.2 from http://sourceforge.net/projects/nfs/files/nfs-utils/1.3.2/.
I configure using the following command./configure --prefix=/home/username/installs/tmp --exec-prefix=/home/username/installs/tmpWhen i run "make install" most of the packages are put under
/home/username/installs/tmp, but for some reason the install script tries to putosd_loginunder /sbin, which results in an error:Making install in
osd_login
make[2]: Entering directory/home/username/installs/nfs-utils-1.3.2/utils/osd_login' make[3]: Entering directory/home/username/installs/nfs-utils-1.3.2/utils/osd_login'
/usr/bin/mkdir-p '/sbin'
/usr/bin/install-cosd_login'/sbin'
/usr/bin/install: cannot remove ‘/sbin/osd_login’: Permission denied make[3]: *** [install-dist_sbinSCRIPTS] Error 1Quoted 1 line
This is not supposed to happen, is it?
No, it is.
There are three utils (mount.nfs/mount.nfs4, nfsdcltrack andosd_login) must be installed in directory/sbin/, they are hard-coded.Quoted 1 line
Is there an easy way to fix it? I get the same error trying to build nfs-utils-1.3.1 as well.
No, they are must installed in
/sbin/for kernel module nfsd.ko needing/sbin/nfsdcltrackand objlayoutdriver.ko needing/sbin/osd_login.You can not skip this problem with recently source.
if you are hurry, you can avoid this problem with the following patch and configure as,# ./configure --disable-mount --disable-nfsdcltrack --disable-osdlogin --prefix=/root/test --exec-prefix=/root/test/Ps: It is just a draft made by diff. I will send some patches for this problem.
thanks,
Kinglong Mee===================================================================
configure.ac +8
-1@@ -213,9 +213,16 @@ fi AC_ARG_ENABLE(nfsdcltrack, [AC_HELP_STRING([--disable-nfsdcltrack], [disable NFSv4 clientid tracking programs @<:@default=no@:>@])], - enable_nfsdctrack=$enableval, + enable_nfsdcltrack=$enableval, enable_nfsdcltrack="yes") +AC_ARG_ENABLE(osdlogin, + [AC_HELP_STRING([--disable-osdlogin], + [disable osd_login scripts @<:@default=no@:>@])], + enable_osdlogin=$enableval, + enable_osdlogin="yes") + AM_CONDITIONAL(CONFIG_OSD_LOGIN, [test "$enable_osdlogin" = "yes" ]) + dnl Check for TI-RPC library and headers AC_LIBTIRPC @@ -346,7 +353,7 @@ AC_SUBST(LIBBSD) AC_SUBST(LIBBLKID) AC_SUBST(LIBDL) -if test "$enable_libmount" != no; then +if test "$enable_libmount" = yes; then AC_CHECK_LIB(mount, mnt_context_do_mount, [LIBMOUNT="-lmount"], AC_MSG_ERROR([libmount needed])) AC_CHECK_HEADER(libmount/libmount.h, , AC_MSG_ERROR([Cannot find libmount header file libmount/libmount.h])) fiutils/Makefile.am +3
-1@@ -25,6 +25,10 @@ if CONFIG_NFSDCLTRACK OPTDIRS += nfsdcltrack endif +if CONFIG_OSD_LOGIN +OPTDIRS += osd_login +endif + SUBDIRS = \ exportfs \ mountd \@@ -32,7 +36,6 @@ SUBDIRS = \ nfsstat \ showmount \ statd \ - osd_login \ $(OPTDIRS) MAINTAINERCLEANFILES = Makefile.in
The arm machine does not have rpcinfo.
On the server i get this:
rpcinfo -p
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 43663 status
100005 1 udp 20048 mountd
100024 1 tcp 39197 status
100005 1 tcp 20048 mountd
100005 2 udp 20048 mountd
100005 2 tcp 20048 mountd
100005 3 udp 20048 mountd
100005 3 tcp 20048 mountd
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100227 3 tcp 2049 nfs_acl
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100227 3 udp 2049 nfs_acl
100021 1 udp 55946 nlockmgr
100021 3 udp 55946 nlockmgr
100021 4 udp 55946 nlockmgr
100021 1 tcp 57551 nlockmgr
100021 3 tcp 57551 nlockmgr
100021 4 tcp 57551 nlockmgrMy /etc/exports:
/share/ 192.168.0.0/24(rw,fsid=0,no_subtree_check) /share/test 192.168.0.0/24(rw,no_subtree_check,nohide)
I am able to mount the nfs share on a third computer, but not on the arm computer that uses my build.
Thanks,
Eino
Quoted 362 lines · Kinglong Mee
Quoted 11 lines · Eino Juhani Oltedal
Thank you for the help. I was able to avoid the error by using make DESTDIR=${HOME}/installs/arm instead of the prefix. Then i copied everything under ${HOME}/installs/arm over to the root of the ARM file-system.
However when trying to use the newly built nfs I get some errors:
mount -t nfs 192.168.0.104:/test /mnt
mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd. mount.nfs: an incorrect mount option was specifiedQuoted 7 lines
mount -t nfs -o nolock 192.168.0.104:/test /mnt
mount.nfs: Protocol not supportedshowmount also gives an error:
showmount -e 192.168.0.104
clnt_create: RPC: Unknown protocolCan you show me the rpcinfo messages, and exports entry?
# rpcinfo -p # cat /etc/exports # exportfsthanks
Kinglong MeeQuoted 335 lines
I compiled nfs using this command:
cd ~/installs/util-linux-2.26.1 ./configure --host=arm-linux-gnueabihf --build=x86_64-linux --disable-gss --disable-nfsv4 CC=arm-linux-gnueabihf-gcc CPPFLAGS="-I${HOME}/installs/arm/include, -I${HOME}/installs/arm/usr/include" LDFLAGS="-L${HOME}/installs/arm/lib/, -L${HOME}/installs/arm/usr/lib/" make make DESTDIR=${HOME}/installs/arm installI compiled the dependencies libblkid and libtirpc with the following commands:
cd ~/installs/util-linux-2.26.1 ./configure --host=arm-linux-gnueabihf --disable-all-programs --enable-libblkid --build=x86_64-linux CC=arm-linux-gnueabihf-gcc make make DESTDIR=${HOME}/installs/arm install cd ~/installs/libtirpc-0.2.5 ./configure --host=arm-linux-gnueabihf --build=x86_64-linux --disable-gssapi CC=arm-linux-gnueabihf-gcc make make DESTDIR=${HOME}/installs/arm installHere is my build file tree:
$HOME/installs/arm
├── bin ├── lib │ ├── libblkid.so.1 -> libblkid.so.1.1.0 │ └── libblkid.so.1.1.0 ├── sbin │ ├── mount.nfs │ ├── mount.nfs4 -> mount.nfs │ ├── osd_login │ ├── umount.nfs -> mount.nfs │ └── umount.nfs4 -> mount.nfs ├── usr │ ├── bin │ ├── etc │ │ └── netconfig │ ├── include │ │ ├── blkid │ │ │ └── blkid.h │ │ └── tirpc │ │ ├── netconfig.h │ │ ├── rpc │ │ │ ├── auth_des.h │ │ │ ├── auth_gss.h │ │ │ ├── auth.h │ │ │ ├── auth_kerb.h │ │ │ ├── auth_unix.h │ │ │ ├── clnt.h │ │ │ ├── clnt_soc.h │ │ │ ├── clnt_stat.h │ │ │ ├── des_crypt.h │ │ │ ├── des.h │ │ │ ├── nettype.h │ │ │ ├── pmap_clnt.h │ │ │ ├── pmap_prot.h │ │ │ ├── pmap_rmt.h │ │ │ ├── raw.h │ │ │ ├── rpcb_clnt.h │ │ │ ├── rpcb_prot.h │ │ │ ├── rpcb_prot.x │ │ │ ├── rpc_com.h │ │ │ ├── rpcent.h │ │ │ ├── rpc.h │ │ │ ├── rpc_msg.h │ │ │ ├── svc_auth.h │ │ │ ├── svc_dg.h │ │ │ ├── svc.h │ │ │ ├── svc_soc.h │ │ │ ├── types.h │ │ │ └── xdr.h │ │ └── rpcsvc │ │ ├── crypt.h │ │ └── crypt.x │ ├── lib │ │ ├── libblkid.a │ │ ├── libblkid.la │ │ ├── libblkid.so -> ../../lib/libblkid.so.1.1.0 │ │ ├── libtirpc.a │ │ ├── libtirpc.la │ │ ├── libtirpc.so -> libtirpc.so.1.0.10 │ │ ├── libtirpc.so.1 -> libtirpc.so.1.0.10 │ │ ├── libtirpc.so.1.0.10 │ │ ├── pkgconfig │ │ │ ├── blkid.pc │ │ │ └── libtirpc.pc │ │ └── systemd │ │ └── system │ ├── sbin │ │ ├── exportfs │ │ ├── mountstats │ │ ├── nfsiostat │ │ ├── nfsstat │ │ ├── rpcdebug │ │ ├── rpc.mountd │ │ ├── rpc.nfsd │ │ ├── rpc.statd │ │ ├── showmount │ │ ├── sm-notify │ │ └── start-statd │ └── share │ ├── bash-completion │ │ └── completions │ ├── locale │ │ ├── ca │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── cs │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── da │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── de │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── es │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── et │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── eu │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── fi │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── fr │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── gl │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── hr │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── hu │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── id │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── it │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── ja │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── nl │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── pl │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── pt_BR │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── ru │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── sl │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── sv │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── tr │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── uk │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── vi │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ ├── zh_CN │ │ │ └── LC_MESSAGES │ │ │ └── util-linux.mo │ │ └── zh_TW │ │ └── LC_MESSAGES │ │ └── util-linux.mo │ └── man │ ├── man1 │ ├── man3 │ │ ├── bindresvport.3t │ │ ├── des_crypt.3t │ │ ├── getnetconfig.3t │ │ ├── getnetpath.3t │ │ ├── getrpcent.3t │ │ ├── getrpcport.3t │ │ ├── libblkid.3 │ │ ├── rpc.3t │ │ ├── rpcbind.3t │ │ ├── rpc_clnt_auth.3t │ │ ├── rpc_clnt_calls.3t │ │ ├── rpc_clnt_create.3t │ │ ├── rpc_secure.3t │ │ ├── rpc_soc.3t │ │ ├── rpc_svc_calls.3t │ │ ├── rpc_svc_create.3t │ │ ├── rpc_svc_err.3t │ │ ├── rpc_svc_reg.3t │ │ ├── rpc_xdr.3t │ │ └── rtime.3t │ ├── man5 │ │ ├── exports.5 │ │ ├── netconfig.5 │ │ ├── nfs.5 │ │ ├── nfsmount.conf.5 │ │ └── terminal-colors.d.5 │ ├── man7 │ │ └── nfsd.7 │ └── man8 │ ├── exportfs.8 │ ├── mountd.8 │ ├── mount.nfs.8 │ ├── mountstats.8 │ ├── nfsd.8 │ ├── nfsiostat.8 │ ├── nfsstat.8 │ ├── rpcdebug.8 │ ├── rpc.mountd.8 -> mountd.8 │ ├── rpc.nfsd.8 -> nfsd.8 │ ├── rpc.sm-notify.8 -> sm-notify.8 │ ├── rpc.statd.8 -> statd.8 │ ├── showmount.8 │ ├── sm-notify.8 │ ├── statd.8 │ └── umount.nfs.8 └── var └── lib └── nfs ├── etab ├── rmtab ├── sm ├── sm.bak ├── state └── xtabDo you have any idea what's missing? Maybe some dependencies?
Cheers,
EinoQuoted 88 lines · Kinglong Mee
Quoted 18 lines · Eino Juhani Oltedal
Hi!
I'm trying to build nfs from source. I'm using nfs-utils-1.3.2 from http://sourceforge.net/projects/nfs/files/nfs-utils/1.3.2/.
I configure using the following command./configure --prefix=/home/username/installs/tmp --exec-prefix=/home/username/installs/tmpWhen i run "make install" most of the packages are put under
/home/username/installs/tmp, but for some reason the install script tries to putosd_loginunder /sbin, which results in an error:Making install in
osd_login
make[2]: Entering directory/home/username/installs/nfs-utils-1.3.2/utils/osd_login' make[3]: Entering directory/home/username/installs/nfs-utils-1.3.2/utils/osd_login'
/usr/bin/mkdir-p '/sbin'
/usr/bin/install-cosd_login'/sbin'
/usr/bin/install: cannot remove ‘/sbin/osd_login’: Permission denied make[3]: *** [install-dist_sbinSCRIPTS] Error 1Quoted 1 line
This is not supposed to happen, is it?
No, it is.
There are three utils (mount.nfs/mount.nfs4, nfsdcltrack andosd_login) must be installed in directory/sbin/, they are hard-coded.Quoted 1 line
Is there an easy way to fix it? I get the same error trying to build nfs-utils-1.3.1 as well.
No, they are must installed in
/sbin/for kernel module nfsd.ko needing/sbin/nfsdcltrackand objlayoutdriver.ko needing/sbin/osd_login.You can not skip this problem with recently source.
if you are hurry, you can avoid this problem with the following patch and configure as,# ./configure --disable-mount --disable-nfsdcltrack --disable-osdlogin --prefix=/root/test --exec-prefix=/root/test/Ps: It is just a draft made by diff. I will send some patches for this problem.
thanks,
Kinglong Mee===================================================================
configure.ac +8
-1@@ -213,9 +213,16 @@ fi AC_ARG_ENABLE(nfsdcltrack, [AC_HELP_STRING([--disable-nfsdcltrack], [disable NFSv4 clientid tracking programs @<:@default=no@:>@])], - enable_nfsdctrack=$enableval, + enable_nfsdcltrack=$enableval, enable_nfsdcltrack="yes") +AC_ARG_ENABLE(osdlogin, + [AC_HELP_STRING([--disable-osdlogin], + [disable osd_login scripts @<:@default=no@:>@])], + enable_osdlogin=$enableval, + enable_osdlogin="yes") + AM_CONDITIONAL(CONFIG_OSD_LOGIN, [test "$enable_osdlogin" = "yes" ]) + dnl Check for TI-RPC library and headers AC_LIBTIRPC @@ -346,7 +353,7 @@ AC_SUBST(LIBBSD) AC_SUBST(LIBBLKID) AC_SUBST(LIBDL) -if test "$enable_libmount" != no; then +if test "$enable_libmount" = yes; then AC_CHECK_LIB(mount, mnt_context_do_mount, [LIBMOUNT="-lmount"], AC_MSG_ERROR([libmount needed])) AC_CHECK_HEADER(libmount/libmount.h, , AC_MSG_ERROR([Cannot find libmount header file libmount/libmount.h])) fiutils/Makefile.am +3
-1@@ -25,6 +25,10 @@ if CONFIG_NFSDCLTRACK OPTDIRS += nfsdcltrack endif +if CONFIG_OSD_LOGIN +OPTDIRS += osd_login +endif + SUBDIRS = \ exportfs \ mountd \@@ -32,7 +36,6 @@ SUBDIRS = \ nfsstat \ showmount \ statd \ - osd_login \ $(OPTDIRS) MAINTAINERCLEANFILES = Makefile.in
Quoted 31 lines · Eino Juhani Oltedal
The arm machine does not have rpcinfo.
On the server i get this:
rpcinfo -pprogram vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100024 1 udp 43663 status 100005 1 udp 20048 mountd 100024 1 tcp 39197 status 100005 1 tcp 20048 mountd 100005 2 udp 20048 mountd 100005 2 tcp 20048 mountd 100005 3 udp 20048 mountd 100005 3 tcp 20048 mountd 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100227 3 tcp 2049 nfs_acl 100003 3 udp 2049 nfs 100003 4 udp 2049 nfs 100227 3 udp 2049 nfs_acl 100021 1 udp 55946 nlockmgr 100021 3 udp 55946 nlockmgr 100021 4 udp 55946 nlockmgr 100021 1 tcp 57551 nlockmgr 100021 3 tcp 57551 nlockmgr 100021 4 tcp 57551 nlockmgr
Quoted 5 lines
My
/etc/exports:
/share/ 192.168.0.0/24(rw,fsid=0,no_subtree_check) /share/test 192.168.0.0/24(rw,no_subtree_check,nohide)I am able to mount the nfs share on a third computer, but not on the arm computer that uses my build.
It means it's not nfs server's problem.
Quoted 13 lines · Kinglong Mee
Quoted 12 lines · Eino Juhani Oltedal
Quoted 11 lines
Thank you for the help. I was able to avoid the error by using make DESTDIR=${HOME}/installs/arm instead of the prefix. Then i copied everything under ${HOME}/installs/arm over to the root of the ARM file-system.
However when trying to use the newly built nfs I get some errors:
mount -t nfs 192.168.0.104:/test /mnt
mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd. mount.nfs: an incorrect mount option was specified
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
mount -t nfs -o nolock 192.168.0.104:/test /mnt
mount.nfs: Protocol not supportedshowmount also gives an error:
showmount -e 192.168.0.104
clnt_create: RPC: Unknown protocol
static CLIENT *nfs_get_mount_client(const char *hostname, rpcvers_t vers)
{
rpcprog_t program = nfs_getrpcbyname(MOUNTPROG, mount_pgm_tbl);
CLIENT *client;
client = clnt_create(hostname, program, vers, "tcp");
if (client)
return client;
client = clnt_create(hostname, program, vers, "udp");
if (client)
return client;
clnt_pcreateerror("clnt_create");
exit(1);
}Showmount prints the error message only clnt_create both "tcp" and "udp" fail. Does your arm machine not support "tcp" and "udp"? or the firewalld is up? Can you check with firewalld stop?
thanks,
Kinglong Mee
This is a very minimal linux install, it does not have firewalld.
I think that this error might be caused by the kernel being built
without nfs support. I'm unsure how to test this without rebuilding the kernel, as I did not build it myself.
I will try rebuilding the kernel tonight, to see if that helps.
Thanks,
Eino
Quoted 81 lines · Kinglong Mee
Quoted 31 lines · Eino Juhani Oltedal
The arm machine does not have rpcinfo.
On the server i get this:
rpcinfo -pprogram vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100024 1 udp 43663 status 100005 1 udp 20048 mountd 100024 1 tcp 39197 status 100005 1 tcp 20048 mountd 100005 2 udp 20048 mountd 100005 2 tcp 20048 mountd 100005 3 udp 20048 mountd 100005 3 tcp 20048 mountd 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100227 3 tcp 2049 nfs_acl 100003 3 udp 2049 nfs 100003 4 udp 2049 nfs 100227 3 udp 2049 nfs_acl 100021 1 udp 55946 nlockmgr 100021 3 udp 55946 nlockmgr 100021 4 udp 55946 nlockmgr 100021 1 tcp 57551 nlockmgr 100021 3 tcp 57551 nlockmgr 100021 4 tcp 57551 nlockmgrQuoted 5 lines
My
/etc/exports:
/share/ 192.168.0.0/24(rw,fsid=0,no_subtree_check) /share/test 192.168.0.0/24(rw,no_subtree_check,nohide)I am able to mount the nfs share on a third computer, but not on the arm computer that uses my build.
It means it's not nfs server's problem.
Quoted 13 lines · Kinglong Mee
Quoted 12 lines · Eino Juhani Oltedal
Quoted 11 lines
Thank you for the help. I was able to avoid the error by using make DESTDIR=${HOME}/installs/arm instead of the prefix. Then i copied everything under ${HOME}/installs/arm over to the root of the ARM file-system.
However when trying to use the newly built nfs I get some errors:
mount -t nfs 192.168.0.104:/test /mnt
mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd. mount.nfs: an incorrect mount option was specifiedQuoted 7 lines
Quoted 7 lines
Quoted 7 lines
mount -t nfs -o nolock 192.168.0.104:/test /mnt
mount.nfs: Protocol not supportedshowmount also gives an error:
showmount -e 192.168.0.104
clnt_create: RPC: Unknown protocolstatic CLIENT *nfs_get_mount_client(const char *hostname,
rpcvers_tvers){ rpcprog_t program = nfs_getrpcbyname(MOUNTPROG, mount_pgm_tbl); CLIENT *client; client = clnt_create(hostname, program, vers, "tcp"); if (client) return client; client = clnt_create(hostname, program, vers, "udp"); if (client) return client; clnt_pcreateerror("clnt_create"); exit(1); }Showmount prints the error message only
clnt_createboth "tcp" and "udp" fail. Does your arm machine not support "tcp" and "udp"? or the firewalld is up? Can you check with firewalld stop?thanks,
Kinglong Mee
Quoted 6 lines · Eino Juhani Oltedal
This is a very minimal linux install, it does not have firewalld.
I think that this error might be caused by the kernel being built
without nfs support. I'm unsure how to test this without rebuilding the kernel, as I did not build it myself.I will try rebuilding the kernel tonight, to see if that helps.
You can checking nfsiod process, "# ps -ajx | grep nfsiod", If it is exist, nfs is OK.
thanks,
Kinglong Mee
Quoted 84 lines · Kinglong Mee
Quoted 81 lines · Eino Juhani Oltedal
Quoted 31 lines
The arm machine does not have rpcinfo.
On the server i get this:
rpcinfo -pprogram vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100024 1 udp 43663 status 100005 1 udp 20048 mountd 100024 1 tcp 39197 status 100005 1 tcp 20048 mountd 100005 2 udp 20048 mountd 100005 2 tcp 20048 mountd 100005 3 udp 20048 mountd 100005 3 tcp 20048 mountd 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100227 3 tcp 2049 nfs_acl 100003 3 udp 2049 nfs 100003 4 udp 2049 nfs 100227 3 udp 2049 nfs_acl 100021 1 udp 55946 nlockmgr 100021 3 udp 55946 nlockmgr 100021 4 udp 55946 nlockmgr 100021 1 tcp 57551 nlockmgr 100021 3 tcp 57551 nlockmgr 100021 4 tcp 57551 nlockmgrQuoted 5 lines
My
/etc/exports:
/share/ 192.168.0.0/24(rw,fsid=0,no_subtree_check) /share/test 192.168.0.0/24(rw,no_subtree_check,nohide)I am able to mount the nfs share on a third computer, but not on the arm computer that uses my build.
It means it's not nfs server's problem.
Quoted 13 lines · Kinglong Mee
Quoted 12 lines · Eino Juhani Oltedal
Quoted 11 lines
Thank you for the help. I was able to avoid the error by using make DESTDIR=${HOME}/installs/arm instead of the prefix. Then i copied everything under ${HOME}/installs/arm over to the root of the ARM file-system.
However when trying to use the newly built nfs I get some errors:
mount -t nfs 192.168.0.104:/test /mnt
mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd. mount.nfs: an incorrect mount option was specifiedQuoted 7 lines
Quoted 7 lines
Quoted 7 lines
mount -t nfs -o nolock 192.168.0.104:/test /mnt
mount.nfs: Protocol not supportedshowmount also gives an error:
showmount -e 192.168.0.104
clnt_create: RPC: Unknown protocolstatic CLIENT *nfs_get_mount_client(const char *hostname,
rpcvers_tvers){ rpcprog_t program = nfs_getrpcbyname(MOUNTPROG, mount_pgm_tbl); CLIENT *client; client = clnt_create(hostname, program, vers, "tcp"); if (client) return client; client = clnt_create(hostname, program, vers, "udp"); if (client) return client; clnt_pcreateerror("clnt_create"); exit(1); }Showmount prints the error message only
clnt_createboth "tcp" and "udp" fail. Does your arm machine not support "tcp" and "udp"? or the firewalld is up? Can you check with firewalld stop?thanks,
Kinglong Mee
Hm, it seems to be there. ps output:
26 root 0 SW< [nfsiod]
Thanks,
Eino
Quoted 14 lines · Kinglong Mee
Quoted 6 lines · Eino Juhani Oltedal
This is a very minimal linux install, it does not have firewalld.
I think that this error might be caused by the kernel being built
without nfs support. I'm unsure how to test this without rebuilding the kernel, as I did not build it myself.I will try rebuilding the kernel tonight, to see if that helps.
You can checking nfsiod process, "# ps -ajx | grep nfsiod", If it is exist, nfs is OK.
thanks,
Kinglong Mee