Skip to contentSkip to conversation

ls102xa: ddr4: Use LPUART as console output to verify DCU driver

PATCH New Alison Wang 2 participants 2 messages Mar 9, 2015 – Apr 23, 2015

lore
Share & tools
lore

Alison Wang

author
#0 lore raw

PATCH 1/1 ls102xa: ddr4: Use LPUART as console output to verify DCU driver

On QDS board with DDR4 DIMM, LPUART is used as console output to verify DCU driver. This patch adds ls1021aqds_ddr4_nor_lpuart_defconfig for this support.

Signed-off-by Alison Wang <[email protected]>
---
 board/freescale/ls1021aqds/MAINTAINERS       | 1 +
 configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 3 +++
 2 files changed, 4 insertions(+)
 create mode 100644 configs/ls1021aqds_ddr4_nor_lpuart_defconfig
board/freescale/ls1021aqds/MAINTAINERS +1 -0
index 661526b..820d322 100644
@@ -5,6 +5,7 @@ F:	board/freescale/ls1021aqds/
 F:	include/configs/ls1021aqds.h
 F:	configs/ls1021aqds_nor_defconfig
 F:	configs/ls1021aqds_ddr4_nor_defconfig
+F:	configs/ls1021aqds_ddr4_nor_lpuart_defconfig
 F:	configs/ls1021aqds_nor_SECURE_BOOT_defconfig
 F:	configs/ls1021aqds_nor_lpuart_defconfig
 F:	configs/ls1021aqds_sdcard_defconfig
configs/ls1021aqds_ddr4_nor_lpuart_defconfig new file +3 -0
new file mode 100644
index 0000000..4d2714b
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART"
+CONFIG_ARM=y
+CONFIG_TARGET_LS1021AQDS=y
Signature · 1 line
2.1.0.27.g96db324
Applied
#1 lore raw

PATCH 1/1 ls102xa: ddr4: Use LPUART as console output to verify DCU driver

Quoted 6 lines · Alison Wang

On QDS board with DDR4 DIMM, LPUART is used as console output to verify DCU driver. This patch adds ls1021aqds_ddr4_nor_lpuart_defconfig for this support.

Signed-off-by Alison Wang <[email protected]>

---

Applied to fsl-qoriq master, awaiting upstream.

York