Odroid-xu3 support
Hello,
I have added support for the Odroid XU3 board. This layer can be found at https://github.com/akuster/meta-odroid. It supports XFCE graphics and has sdcard image support.
enjoy,
Armin
Quoted 3 lines · On 05/04/15 23:56, akuster808 wrote:
I have added support for the Odroid XU3 board. This layer can be found at https://github.com/akuster/meta-odroid. It supports XFCE graphics and has sdcard image support.
Sounds great!
In addition to your meta-odroid there are also:
https://github.com/stoupa-cz/meta-odroid
https://github.com/MarkusEich/meta-odroid
Yours supports: odroid-xu3
stoupa-cz supports: odroid-c1, odroid-u2, odroid-xu MarkusEich supports: odroid-u2, odroid-xu
It'd be nice if someone could put together one "meta-odroid" that would support them all ;-) Or at least it'd be nice if at least one of them was found via the layer index ;-)
Quoted 7 lines · Trevor Woerner
Quoted 3 lines · On 05/04/15 23:56, akuster808 wrote:
I have added support for the Odroid XU3 board. This layer can be found at https://github.com/akuster/meta-odroid. It supports XFCE graphics and has sdcard image support.
Sounds great!
Thanks.
Quoted 10 lines
In addition to your meta-odroid there are also:
https://github.com/stoupa-cz/meta-odroid
https://github.com/MarkusEich/meta-odroidYours supports: odroid-xu3
stoupa-cz supports: odroid-c1, odroid-u2, odroid-xu MarkusEich supports: odroid-u2, odroid-xuIt'd be nice if someone could put together one "meta-odroid" that would support them all ;-)
Yep. looking into that.
Or at least it'd be nice if at least one of them
Quoted 1 line
was found via the layer index ;-)
that is the goal.
regards,
Armin
Quoted 1 line
Quoted 5 lines · On 05/06/15 16:24, akuster808 wrote:
Quoted 2 lines · Trevor Woerner
It'd be nice if someone could put together one "meta-odroid" that would support them all ;-)
Yep. looking into that.
That's great to hear :-D Which device(s) do you have, just the -xu3? My -c1 arrived yesterday so I can help with testing that device if you don't have one.
Quoted 8 lines · Trevor Woerner
Quoted 5 lines · On 05/06/15 16:24, akuster808 wrote:
Quoted 2 lines · Trevor Woerner
It'd be nice if someone could put together one "meta-odroid" that would support them all ;-)
Yep. looking into that.
That's great to hear :-D Which device(s) do you have, just the -xu3?
I just got -W so just the two. nothing else.
- armin
My
Quoted 3 lines
-c1 arrived yesterday so I can help with testing that device if you don't have one.
Hi,
2015-05-06 23:41 GMT+02:00 Trevor Woerner <[email protected]>:
Quoted 10 lines · On 05/06/15 16:24, akuster808 wrote:
Quoted 5 lines · Trevor Woerner
Quoted 2 lines
It'd be nice if someone could put together one "meta-odroid" that would support them all ;-)
Yep. looking into that.
That's great to hear :-D Which device(s) do you have, just the -xu3? My -c1 arrived yesterday so I can help with testing that device if you don't have one.
I think regarding the C1 the following two repositories are the most complete one:
https://github.com/linux-meson/meta-amlogic
https://github.com/stoupa-cz/meta-odroid
Mine (meta-amlogic) is organised in branches named like Yocto/Openembedded. The master branch needs some synchronization with Fido branch. The layer I maintain is for Amlogic based devices because I do own a ODROID-C1 and a Wetek.Play which both run on Amlogic CPU.
From the ODROID family I do only own a ODROID-C1. If there will be a combined Layer for all odroid devices I will port my recipes to this and can help on supporting it.
I am mostly interested in Multimedia stuff and I do plan to setup a separate layer for Kodi/XBMC on amlogic based devices.
So how should we proceed with the layer jungle?
regards,
Christian
Quoted 5 lines
--
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-devel
Signature · 1 line
http://project-magpie.github.io/
Quoted 7 lines · Christian Ege
From the ODROID family I do only own a ODROID-C1. If there will be a
combined Layer for all odroid devices I will port my recipes to this and can help on supporting it.
I am mostly interested in Multimedia stuff and I do plan to setup a separate layer for Kodi/XBMC on amlogic based devices.So how should we proceed with the layer jungle?
Ideally meta-amlogic provides things specific to the chip itself (vendor kernel? vendor u-boot?) and meta-odroid contains things related to the various boards themselves (tweaks specific to each board).
Maybe the beaglebone provides a good example to follow? (meta-ti, meta-beagleboard) Although I'm not sure how clean the separation is in those layers.
Hi,
Quoted 7 lines · Trevor Woerner
Quoted 6 lines · Christian Ege
From the ODROID family I do only own a ODROID-C1. If there will be a
combined Layer for all odroid devices I will port my recipes to this and can help on supporting it.
I am mostly interested in Multimedia stuff and I do plan to setup a separate layer for Kodi/XBMC on amlogic based devices.
Quoted 5 lines
Quoted 1 line
So how should we proceed with the layer jungle?
Ideally meta-amlogic provides things specific to the chip itself (vendor kernel? vendor u-boot?) and meta-odroid contains things related to the various boards themselves (tweaks specific to each board).
This would be in an ideal world. In the real world each vendor like hardkernel or wetek is maintaining their own kernel tree derived from Amlogic.
Amlogic itself maintains a buildroot based BSP for their boards. My Idea was at least merging u-Boot and Kernel of both vendors into one tree.
Quoted 3 lines
Maybe the beaglebone provides a good example to follow? (meta-ti, meta-beagleboard) Although I'm not sure how clean the separation is in those layers.
Yes this is the way to go, the manufacturer maintains its own layer. I can try to get in contact with Amlogic if they are interested in creating such a layer or at least supporting it.
regards,
Christian