ppc: xilinx: Remove ancient ppc405 and ppc440 platforms
Subsystems (3)
PATCH 1/1 ppc: xilinx: Remove ancient ppc405 and ppc440 platforms
Remove ancient Xilinx platforms.
Signed-off-by Michal Simek <[email protected]>
---
arch/powerpc/cpu/ppc4xx/Kconfig | 20 ---- arch/powerpc/cpu/ppc4xx/Makefile | 3 - arch/powerpc/cpu/ppc4xx/cpu.c | 4 - arch/powerpc/cpu/ppc4xx/speed.c | 9 +- arch/powerpc/cpu/ppc4xx/start.S | 3 +- arch/powerpc/cpu/ppc4xx/xilinx_irq.c | 89 --------------- arch/powerpc/include/asm/interrupt.h | 4 - arch/powerpc/include/asm/ppc4xx.h | 2 - arch/powerpc/include/asm/xilinx_irq.h | 25 ---- arch/powerpc/lib/board.c | 2 - board/avnet/fx12mm/Kconfig | 12 -- board/avnet/fx12mm/MAINTAINERS | 7 -- board/avnet/fx12mm/Makefile | 11 -- board/avnet/fx12mm/fx12mm.c | 34 ------ board/avnet/fx12mm/xparameters.h | 35 ------ board/avnet/v5fx30teval/Kconfig | 12 -- board/avnet/v5fx30teval/MAINTAINERS | 7 -- board/avnet/v5fx30teval/Makefile | 11 -- board/avnet/v5fx30teval/v5fx30teval.c | 17 --- board/avnet/v5fx30teval/xparameters.h | 22 ---- board/xilinx/ml507/Kconfig | 12 -- board/xilinx/ml507/MAINTAINERS | 7 -- board/xilinx/ml507/Makefile | 11 -- board/xilinx/ml507/ml507.c | 17 --- board/xilinx/ml507/xparameters.h | 23 ---- board/xilinx/ppc405-generic/Kconfig | 12 -- board/xilinx/ppc405-generic/MAINTAINERS | 7 -- board/xilinx/ppc405-generic/Makefile | 12 -- .../xilinx/ppc405-generic/xilinx_ppc405_generic.c | 48 -------- board/xilinx/ppc405-generic/xparameters.h | 25 ---- board/xilinx/ppc440-generic/Kconfig | 12 -- board/xilinx/ppc440-generic/MAINTAINERS | 7 -- board/xilinx/ppc440-generic/Makefile | 13 --- board/xilinx/ppc440-generic/init.S | 34 ------ .../xilinx/ppc440-generic/xilinx_ppc440_generic.c | 41 ------- board/xilinx/ppc440-generic/xparameters.h | 23 ---- common/board_f.c | 2 - common/cmd_bdinfo.c | 9 +- configs/fx12mm_defconfig | 4 - configs/fx12mm_flash_defconfig | 4 - configs/ml507_defconfig | 4 - configs/ml507_flash_defconfig | 4 - configs/v5fx30teval_defconfig | 4 - configs/v5fx30teval_flash_defconfig | 4 - configs/xilinx-ppc405-generic_defconfig | 4 - configs/xilinx-ppc405-generic_flash_defconfig | 4 - configs/xilinx-ppc440-generic_defconfig | 4 - configs/xilinx-ppc440-generic_flash_defconfig | 4 - drivers/net/xilinx_ll_temac.c | 15 +-- drivers/net/xilinx_ll_temac_sdma.c | 59 ---------- drivers/net/xilinx_ll_temac_sdma.h | 11 -- include/configs/fx12mm.h | 52 --------- include/configs/ml507.h | 39 ------- include/configs/v5fx30teval.h | 39 ------- include/configs/xilinx-ppc.h | 126 --------------------- include/configs/xilinx-ppc405-generic.h | 42 ------- include/configs/xilinx-ppc405.h | 22 ---- include/configs/xilinx-ppc440-generic.h | 39 ------- include/configs/xilinx-ppc440.h | 17 --- 59 files changed, 9 insertions(+), 1136 deletions(-) delete mode 100644 arch/powerpc/cpu/ppc4xx/xilinx_irq.c delete mode 100644 arch/powerpc/include/asm/xilinx_irq.h delete mode 100644 board/avnet/fx12mm/Kconfig delete mode 100644 board/avnet/fx12mm/MAINTAINERS delete mode 100644 board/avnet/fx12mm/Makefile delete mode 100644 board/avnet/fx12mm/fx12mm.c delete mode 100644 board/avnet/fx12mm/xparameters.h delete mode 100644 board/avnet/v5fx30teval/Kconfig delete mode 100644 board/avnet/v5fx30teval/MAINTAINERS delete mode 100644 board/avnet/v5fx30teval/Makefile delete mode 100644 board/avnet/v5fx30teval/v5fx30teval.c delete mode 100644 board/avnet/v5fx30teval/xparameters.h delete mode 100644 board/xilinx/ml507/Kconfig delete mode 100644 board/xilinx/ml507/MAINTAINERS delete mode 100644 board/xilinx/ml507/Makefile delete mode 100644 board/xilinx/ml507/ml507.c delete mode 100644 board/xilinx/ml507/xparameters.h delete mode 100644 board/xilinx/ppc405-generic/Kconfig delete mode 100644 board/xilinx/ppc405-generic/MAINTAINERS delete mode 100644 board/xilinx/ppc405-generic/Makefile delete mode 100644 board/xilinx/ppc405-generic/xilinx_ppc405_generic.c delete mode 100644 board/xilinx/ppc405-generic/xparameters.h delete mode 100644 board/xilinx/ppc440-generic/Kconfig delete mode 100644 board/xilinx/ppc440-generic/MAINTAINERS delete mode 100644 board/xilinx/ppc440-generic/Makefile delete mode 100644 board/xilinx/ppc440-generic/init.S delete mode 100644 board/xilinx/ppc440-generic/xilinx_ppc440_generic.c delete mode 100644 board/xilinx/ppc440-generic/xparameters.h delete mode 100644 configs/fx12mm_defconfig delete mode 100644 configs/fx12mm_flash_defconfig delete mode 100644 configs/ml507_defconfig delete mode 100644 configs/ml507_flash_defconfig delete mode 100644 configs/v5fx30teval_defconfig delete mode 100644 configs/v5fx30teval_flash_defconfig delete mode 100644 configs/xilinx-ppc405-generic_defconfig delete mode 100644 configs/xilinx-ppc405-generic_flash_defconfig delete mode 100644 configs/xilinx-ppc440-generic_defconfig delete mode 100644 configs/xilinx-ppc440-generic_flash_defconfig delete mode 100644 include/configs/fx12mm.h delete mode 100644 include/configs/ml507.h delete mode 100644 include/configs/v5fx30teval.h delete mode 100644 include/configs/xilinx-ppc.h delete mode 100644 include/configs/xilinx-ppc405-generic.h delete mode 100644 include/configs/xilinx-ppc405.h delete mode 100644 include/configs/xilinx-ppc440-generic.h delete mode 100644 include/configs/xilinx-ppc440.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -20
@@ -85,12 +85,6 @@ config TARGET_YOSEMITE config TARGET_YUCCA bool "Support yucca" -config TARGET_FX12MM - bool "Support fx12mm" - -config TARGET_V5FX30TEVAL - bool "Support v5fx30teval" - config TARGET_CPCI2DP bool "Support CPCI2DP"
@@ -151,15 +145,6 @@ config TARGET_P3P440 config TARGET_XPEDITE1000 bool "Support xpedite1000" -config TARGET_ML507 - bool "Support ml507" - -config TARGET_XILINX_PPC405_GENERIC - bool "Support xilinx-ppc405-generic" - -config TARGET_XILINX_PPC440_GENERIC - bool "Support xilinx-ppc440-generic" - endchoice source "board/amcc/acadia/Kconfig"
@@ -179,8 +164,6 @@ source "board/amcc/taishan/Kconfig" source "board/amcc/walnut/Kconfig" source "board/amcc/yosemite/Kconfig" source "board/amcc/yucca/Kconfig" -source "board/avnet/fx12mm/Kconfig" -source "board/avnet/v5fx30teval/Kconfig" source "board/csb272/Kconfig" source "board/csb472/Kconfig" source "board/esd/cpci2dp/Kconfig"
@@ -205,9 +188,6 @@ source "board/sbc405/Kconfig" source "board/sc3/Kconfig" source "board/t3corp/Kconfig" source "board/xes/xpedite1000/Kconfig" -source "board/xilinx/ml507/Kconfig" -source "board/xilinx/ppc405-generic/Kconfig" -source "board/xilinx/ppc440-generic/Kconfig" source "board/zeus/Kconfig" endmenu
arch/powerpc/cpu/ppc4xx/Makefile +0 -3
@@ -36,13 +36,10 @@ obj-y += tlb.o obj-y += traps.o obj-y += usb.o obj-y += usb_ohci.o -obj-$(CONFIG_XILINX_440) += xilinx_irq.o -ifndef CONFIG_XILINX_440 obj-y += 4xx_uart.o obj-y += gpio.o obj-y += miiphy.o obj-y += uic.o -endif ifdef CONFIG_SPL_BUILD obj-y += spl_boot.o
arch/powerpc/cpu/ppc4xx/cpu.c +0 -4
@@ -285,11 +285,7 @@ int checkcpu (void)get_sys_info (&sys_info); -#if defined(CONFIG_XILINX_440 ) -puts ("IBM PowerPC " ); -#else puts ("AMCC PowerPC " ); -#endif switch (pvr) {
arch/powerpc/cpu/ppc4xx/speed.c +1 -8
@@ -382,8 +382,7 @@ ulong get_PCI_freq (void) return sys_info.freqPCI; } -#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) \ - && !defined(CONFIG_XILINX_440) +#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)void get_sys_info (sys_info_t * sysInfo) {unsigned long strp0;
@@ -417,7 +416,6 @@ void get_sys_info (sys_info_t * sysInfo) }#else -#if !defined(CONFIG_XILINX_440)void get_sys_info (sys_info_t * sysInfo) {unsigned long strp0;
@@ -504,7 +502,6 @@ void get_sys_info (sys_info_t * sysInfo) }#endif -#endif /* CONFIG_XILINX_440 */ #if defined(CONFIG_YUCCA )unsigned long determine_sysper (void )
@@ -717,10 +714,6 @@ unsigned long determine_pci_clock_per(void) }#endif -#elif defined(CONFIG_XILINX_405) -extern void get_sys_info (sys_info_t * sysInfo); -extern ulong get_PCI_freq (void ); -#elif defined(CONFIG_405)void get_sys_info (sys_info_t * sysInfo)
arch/powerpc/cpu/ppc4xx/start.S +1 -2
@@ -818,8 +818,7 @@ _start: ori r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE at l mtdccr r4 -#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))\ - && !defined (CONFIG_XILINX_405) +#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR)) /*----------------------------------------------------------------------- */ /* Tune the speed and size for flash CS0 */ /*----------------------------------------------------------------------- */
arch/powerpc/cpu/ppc4xx/xilinx_irq.c deleted +0 -89
89 lines not on this page · raw message
arch/powerpc/include/asm/interrupt.h +0 -4
@@ -9,11 +9,7 @@#ifndef INTERRUPT_H #define INTERRUPT_H -#if defined(CONFIG_XILINX_440 ) -#include <asm/xilinx_irq.h> -#else #include <asm/ppc4xx-uic.h> -#endif void pic_enable (void );void pic_irq_enable (unsigned int irq);
arch/powerpc/include/asm/ppc4xx.h +0 -2
@@ -179,9 +179,7 @@#include <asm/ppc4xx-sdram.h> #include <asm/ppc4xx-ebc.h> -#if !defined(CONFIG_XILINX_440 )#include <asm/ppc4xx-uic.h> -#endif /* * Macro for generating register field mnemonics
arch/powerpc/include/asm/xilinx_irq.h deleted +0 -25
@@ -1,25 +0,0 @@ -/* -* (C) Copyright 2008 -* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es -* This work has been supported by: QTechnology http://qtec.com/ -* Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd at denx.de -* SPDX-License-Identifier: GPL-2.0+ -*/ -#ifndef XILINX_IRQ_H -#define XILINX_IRQ_H - -#define intc XPAR_INTC_0_BASEADDR -#define ISR (intc + (0 * 4))/* Interrupt Status Register */ -#define IPR (intc + (1 * 4))/* Interrupt Pending Register */ -#define IER (intc + (2 * 4))/* Interrupt Enable Register */ -#define IAR (intc + (3 * 4))/* Interrupt Acknowledge Register */ -#define SIE (intc + (4 * 4))/* Set Interrupt Enable bits */ -#define CIE (intc + (5 * 4))/* Clear Interrupt Enable bits */ -#define IVR (intc + (6 * 4))/* Interrupt Vector Register */ -#define MER (intc + (7 * 4))/* Master Enable Register */ - -#define IRQ_MASK (irq) (1 << (irq & 0x1f)) - -#define IRQ_MAX XPAR_INTC_MAX_NUM_INTR_INPUTS - -#endif
arch/powerpc/lib/board.c +0 -2
@@ -549,8 +549,6 @@ void board_init_f(ulong bootflag)defined (CONFIG_440EPX ) ||defined (CONFIG_440GRX ) bd->bi_pci_busfreq = get_PCI_freq(); bd->bi_opbfreq =get_OPB_freq (); -#elif defined(CONFIG_XILINX_405 ) - bd->bi_pci_busfreq =get_PCI_freq ();#endif #endif
board/avnet/fx12mm/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_FX12MM - -config SYS_BOARD - default "fx12mm" - -config SYS_VENDOR - default "avnet" - -config SYS_CONFIG_NAME - default "fx12mm" - -endif
board/avnet/fx12mm/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -FX12MM BOARD -M: Georg Schardt <[email protected]> -S: Maintained -F: board/avnet/fx12mm/ -F: include/configs/fx12mm.h -F: configs/fx12mm_defconfig -F: configs/fx12mm_flash_defconfig
board/avnet/fx12mm/Makefile deleted +0 -11
@@ -1,11 +0,0 @@ -# -# (C) Copyright 2008 -# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda at uam.es -# This work has been supported by: Qtechnology http://qtec.com/ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += fx12mm.o - -include $(srctree)/board/xilinx/ppc405-generic/Makefile
board/avnet/fx12mm/fx12mm.c deleted +0 -34
@@ -1,34 +0,0 @@ -/* -* (C) Copyright 2008 -* -* Author: Xilinx Inc. -* -* Modified by: -* Georg Schardt <[email protected]> -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <config.h> -#include <common.h> -#include <asm/processor.h> - -int checkboard (void ) -{ -char buf[64 ]; -int i; -int l =getenv_f ("serial#" , buf,sizeof (buf)); - -if (l <0 ) { -printf ("Avnet Virtex4 FX12 with no serial #" ); - }else { -printf ("Avnet Virtex4 FX12 Minimodul # " ); -for (i =0 ; i < l; ++i) { -if (buf[i] ==' ' ) -break ; -putc (buf[i]); - } - } -putc ('\n' ); -return 0 ; -}
board/avnet/fx12mm/xparameters.h deleted +0 -35
@@ -1,35 +0,0 @@ -/* -* (C) Copyright 2008 -* -* Georg Schardt <[email protected]> -* -* SPDX-License-Identifier: GPL-2.0+ -* -* CAUTION: This file is based on the xparameters.h automatically -* generated by libgen. Version: Xilinx EDK 10.1.02 Build EDK_K_SP2.5 -*/ - -#ifndef __XPARAMETER_H__ -#define __XPARAMETER_H__ - -/* RS232 */ -#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000 -#define XPAR_UARTNS550_0_BASEADDR 0x83E00000 - - -/* INT_C */ -#define XPAR_XPS_INTC_0_DEVICE_ID 0 -#define XPAR_XPS_INTC_0_BASEADDR 0x81800000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 2 - -/* CPU core clock */ -#define XPAR_CORE_CLOCK_FREQ_HZ 300000000 -#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 - -/* RAM */ -#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 - -/* FLASH */ -#define XPAR_FLASH_MEM0_BASEADDR 0xFFC00000 - -#endif
board/avnet/v5fx30teval/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_V5FX30TEVAL - -config SYS_BOARD - default "v5fx30teval" - -config SYS_VENDOR - default "avnet" - -config SYS_CONFIG_NAME - default "v5fx30teval" - -endif
board/avnet/v5fx30teval/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -V5FX30TEVAL BOARD -M: Ricardo Ribalda <[email protected]> -S: Maintained -F: board/avnet/v5fx30teval/ -F: include/configs/v5fx30teval.h -F: configs/v5fx30teval_defconfig -F: configs/v5fx30teval_flash_defconfig
board/avnet/v5fx30teval/Makefile deleted +0 -11
@@ -1,11 +0,0 @@ -# -# (C) Copyright 2008 -# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda at uam.es -# This work has been supported by: Qtechnology http://qtec.com/ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += v5fx30teval.o - -include $(srctree)/board/xilinx/ppc440-generic/Makefile
board/avnet/v5fx30teval/v5fx30teval.c deleted +0 -17
@@ -1,17 +0,0 @@ -/* -* (C) Copyright 2008 -* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es -* This work has been supported by: QTechnology http://qtec.com/ -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <config.h> -#include <common.h> -#include <asm/processor.h> - - -int checkboard (void ) -{ -puts ("Avnet Virtex 5 FX30 Evaluation Board\n" ); -return 0 ; -}
board/avnet/v5fx30teval/xparameters.h deleted +0 -22
@@ -1,22 +0,0 @@ -/* -* (C) Copyright 2008 -* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es -* This work has been supported by: QTechnology http://qtec.com/ -* based on xparameters.h by Xilinx -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef XPARAMETER_H -#define XPARAMETER_H - -#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 -#define XPAR_INTC_0_BASEADDR 0x81800000 -#define XPAR_UARTLITE_0_BASEADDR 0x84000000 -#define XPAR_FLASH_MEM0_BASEADDR 0xFF000000 -#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 -#define XPAR_CORE_CLOCK_FREQ_HZ 400000000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 -#define XPAR_UARTLITE_0_BAUDRATE 9600 - -#endif
board/xilinx/ml507/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_ML507 - -config SYS_BOARD - default "ml507" - -config SYS_VENDOR - default "xilinx" - -config SYS_CONFIG_NAME - default "ml507" - -endif
board/xilinx/ml507/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -ML507 BOARD -M: Ricardo Ribalda <[email protected]> -S: Maintained -F: board/xilinx/ml507/ -F: include/configs/ml507.h -F: configs/ml507_defconfig -F: configs/ml507_flash_defconfig
board/xilinx/ml507/Makefile deleted +0 -11
@@ -1,11 +0,0 @@ -# -# (C) Copyright 2008 -# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda at uam.es -# This work has been supported by: Qtechnology http://qtec.com/ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += ml507.o - -include $(srctree)/board/xilinx/ppc440-generic/Makefile
board/xilinx/ml507/ml507.c deleted +0 -17
@@ -1,17 +0,0 @@ -/* -* (C) Copyright 2008 -* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es -* This work has been supported by: QTechnology http://qtec.com/ -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <config.h> -#include <common.h> -#include <asm/processor.h> - - -int checkboard (void ) -{ -puts ("Xilinx ML507 Board\n" ); -return 0 ; -}
board/xilinx/ml507/xparameters.h deleted +0 -23
@@ -1,23 +0,0 @@ -/* -* (C) Copyright 2008 -* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es -* This work has been supported by: QTechnology http://qtec.com/ -* based on xparameters-ml507.h by Xilinx -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef XPARAMETER_H -#define XPARAMETER_H - -#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 -#define XPAR_IIC_EEPROM_BASEADDR 0x81600000 -#define XPAR_INTC_0_BASEADDR 0x81800000 -#define XPAR_UARTLITE_0_BASEADDR 0x84000000 -#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000 -#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 -#define XPAR_CORE_CLOCK_FREQ_HZ 400000000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 -#define XPAR_UARTLITE_0_BAUDRATE 9600 - -#endif
board/xilinx/ppc405-generic/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_XILINX_PPC405_GENERIC - -config SYS_BOARD - default "ppc405-generic" - -config SYS_VENDOR - default "xilinx" - -config SYS_CONFIG_NAME - default "xilinx-ppc405-generic" - -endif
board/xilinx/ppc405-generic/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -PPC405-GENERIC BOARD -M: Ricardo Ribalda <[email protected]> -S: Maintained -F: board/xilinx/ppc405-generic/ -F: include/configs/xilinx-ppc405-generic.h -F: configs/xilinx-ppc405-generic_defconfig -F: configs/xilinx-ppc405-generic_flash_defconfig
board/xilinx/ppc405-generic/Makefile deleted +0 -12
@@ -1,12 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# (C) Copyright 2008 -# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es -# Work supported by Qtechnology http://www.qtec.com -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += ../../xilinx/ppc405-generic/xilinx_ppc405_generic.o
board/xilinx/ppc405-generic/xilinx_ppc405_generic.c deleted +0 -48
48 lines not on this page · raw message
board/xilinx/ppc405-generic/xparameters.h deleted +0 -25
@@ -1,25 +0,0 @@ -/* -* (C) Copyright 2008 -* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es -* This work has been supported by: QTechnology http://qtec.com/ -* based on xparameters-ml507.h by Xilinx -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef XPARAMETER_H -#define XPARAMETER_H - -#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 -#define XPAR_IIC_EEPROM_BASEADDR 0x81600000 -#define XPAR_INTC_0_BASEADDR 0x81800000 -#define XPAR_SPI_0_BASEADDR 0x83400000 -#define XPAR_UARTLITE_0_BASEADDR 0x84000000 -#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000 -#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 -#define XPAR_CORE_CLOCK_FREQ_HZ 400000000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 -#define XPAR_UARTLITE_0_BAUDRATE 9600 -#define XPAR_SPI_0_NUM_TRANSFER_BITS 8 - -#endif
board/xilinx/ppc440-generic/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_XILINX_PPC440_GENERIC - -config SYS_BOARD - default "ppc440-generic" - -config SYS_VENDOR - default "xilinx" - -config SYS_CONFIG_NAME - default "xilinx-ppc440-generic" - -endif
board/xilinx/ppc440-generic/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -PPC440-GENERIC BOARD -M: Ricardo Ribalda <[email protected]> -S: Maintained -F: board/xilinx/ppc440-generic/ -F: include/configs/xilinx-ppc440-generic.h -F: configs/xilinx-ppc440-generic_defconfig -F: configs/xilinx-ppc440-generic_flash_defconfig
board/xilinx/ppc440-generic/Makefile deleted +0 -13
@@ -1,13 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# (C) Copyright 2008 -# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es -# Work supported by Qtechnology http://www.qtec.com -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += ../../xilinx/ppc440-generic/xilinx_ppc440_generic.o -extra-y += ../../xilinx/ppc440-generic/init.o
board/xilinx/ppc440-generic/init.S deleted +0 -34
@@ -1,34 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <ppc_asm.tmpl> -#include <config.h> -#include <asm/mmu.h> - -.section .bootpg,"ax" -.globl tlbtab - -tlbtab: -tlbtab_start -tlbentry(0x00000000, SZ_256M, 0x00000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0x10000000, SZ_256M, 0x10000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0x20000000, SZ_256M, 0x20000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0x30000000, SZ_256M, 0x30000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0x40000000, SZ_256M, 0x40000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0x50000000, SZ_256M, 0x50000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0x60000000, SZ_256M, 0x60000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0x70000000, SZ_256M, 0x70000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0x80000000, SZ_256M, 0x80000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0x90000000, SZ_256M, 0x90000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0xa0000000, SZ_256M, 0xa0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0xb0000000, SZ_256M, 0xb0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0xc0000000, SZ_256M, 0xc0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0xd0000000, SZ_256M, 0xd0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0xe0000000, SZ_256M, 0xe0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbentry(0xf0000000, SZ_256M, 0xf0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I) -tlbtab_end
board/xilinx/ppc440-generic/xilinx_ppc440_generic.c deleted +0 -41
41 lines not on this page · raw message
board/xilinx/ppc440-generic/xparameters.h deleted +0 -23
@@ -1,23 +0,0 @@ -/* -* (C) Copyright 2008 -* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es -* This work has been supported by: QTechnology http://qtec.com/ -* based on xparameters-ml507.h by Xilinx -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef XPARAMETER_H -#define XPARAMETER_H - -#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 -#define XPAR_IIC_EEPROM_BASEADDR 0x81600000 -#define XPAR_INTC_0_BASEADDR 0x81800000 -#define XPAR_UARTLITE_0_BASEADDR 0x84000000 -#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000 -#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 -#define XPAR_CORE_CLOCK_FREQ_HZ 400000000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 -#define XPAR_UARTLITE_0_BAUDRATE 9600 - -#endif
common/board_f.c +0 -2
@@ -627,8 +627,6 @@ static int setup_board_extra(void)defined (CONFIG_440EPX ) ||defined (CONFIG_440GRX ) bd->bi_pci_busfreq = get_PCI_freq(); bd->bi_opbfreq =get_OPB_freq (); -#elif defined(CONFIG_XILINX_405 ) - bd->bi_pci_busfreq =get_PCI_freq ();#endif return 0 ;
common/cmd_bdinfo.c +4 -5
@@ -98,17 +98,16 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])defined (CONFIG_405GP ) || \defined (CONFIG_440EP ) ||defined (CONFIG_440EPX ) || \defined (CONFIG_440GR ) ||defined (CONFIG_440GRX ) || \ -defined (CONFIG_440SP ) ||defined (CONFIG_440SPE ) || \ - defined(CONFIG_XILINX_405) + defined(CONFIG_440SP) || defined(CONFIG_440SPE)print_mhz ("procfreq" , bd->bi_procfreq);print_mhz ("plb_busfreq" , bd->bi_plb_busfreq);#if defined(CONFIG_405EP ) || defined(CONFIG_405GP ) || \ defined(CONFIG_440EP ) || defined(CONFIG_440EPX ) || \ defined(CONFIG_440GR ) || defined(CONFIG_440GRX ) || \ - defined(CONFIG_440SPE ) || defined(CONFIG_XILINX_405 ) + defined(CONFIG_440SPE )print_mhz ("pci_busfreq" , bd->bi_pci_busfreq);#endif -#else /* ! CONFIG_405GP, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ +#else /* ! CONFIG_405GP, CONFIG_405EP, CONFIG_440EP CONFIG_440GR */ #if defined(CONFIG_CPM2 )print_mhz ("vco" , bd->bi_vco);print_mhz ("sccfreq" , bd->bi_sccfreq);
@@ -119,7 +118,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])print_mhz ("cpmfreq" , bd->bi_cpmfreq);#endif print_mhz ("busfreq" , bd->bi_busfreq); -#endif /* CONFIG_405GP, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ +#endif /* CONFIG_405GP, CONFIG_405EP, CONFIG_440EP CONFIG_440GR */ #ifdef CONFIG_ENABLE_36BIT_PHYS #ifdef CONFIG_PHYS_64BIT
configs/fx12mm_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,INIT_TLB=board/xilinx/ppc405-generic/init.o" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_FX12MM=y
configs/fx12mm_flash_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc405-generic/init.o" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_FX12MM=y
configs/ml507_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_ML507=y
configs/ml507_flash_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_ML507=y
configs/v5fx30teval_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_V5FX30TEVAL=y
configs/v5fx30teval_flash_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_V5FX30TEVAL=y
configs/xilinx-ppc405-generic_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_XILINX_PPC405_GENERIC=y
configs/xilinx-ppc405-generic_flash_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_XILINX_PPC405_GENERIC=y
configs/xilinx-ppc440-generic_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_XILINX_PPC440_GENERIC=y
configs/xilinx-ppc440-generic_flash_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_XILINX_PPC440_GENERIC=y
drivers/net/xilinx_ll_temac.c +3 -12
@@ -316,18 +316,9 @@ int xilinx_ll_temac_initialize(bd_t *bis, struct ll_temac_info *devinf) ll_temac->ctrladdr = devinf->ctrl_addr;if (devinf->flags &XILINX_LL_TEMAC_M_SDMA_PLB ) { -#if defined(CONFIG_XILINX_440 ) || defined(CONFIG_XILINX_405 ) -if (devinf->flags &XILINX_LL_TEMAC_M_SDMA_DCR ) { -ll_temac_collect_xldcr_sdma_reg_addr (dev); - ll_temac->in32 = ll_temac_xldcr_in32; - ll_temac->out32 = ll_temac_xldcr_out32; - } else -#endif - { -ll_temac_collect_xlplb_sdma_reg_addr (dev); - ll_temac->in32 = ll_temac_xlplb_in32; - ll_temac->out32 = ll_temac_xlplb_out32; - } +ll_temac_collect_xlplb_sdma_reg_addr (dev); + ll_temac->in32 = ll_temac_xlplb_in32; + ll_temac->out32 = ll_temac_xlplb_out32; ll_temac->ctrlinit = ll_temac_init_sdma; ll_temac->ctrlhalt = ll_temac_halt_sdma; ll_temac->ctrlreset = ll_temac_reset_sdma;
drivers/net/xilinx_ll_temac_sdma.c +0 -59
65 lines not on this page · raw message
drivers/net/xilinx_ll_temac_sdma.h +0 -11
@@ -241,17 +241,6 @@ enum dmac_ctrl {#define DMA_CONTROL_TPE (1 << 2)#define DMA_CONTROL_RESET (1 << 0) -#if defined(CONFIG_XILINX_440 ) || defined(CONFIG_XILINX_405 ) - -/* Xilinx Device Control Register (DCR) in/out accessors */ -unsigned ll_temac_xldcr_in32 (phys_addr_t addr); -void ll_temac_xldcr_out32 (phys_addr_t addr,unsigned value); - -/* collect all register addresses for Xilinx DCR in/out accessors */ -void ll_temac_collect_xldcr_sdma_reg_addr (struct eth_device *dev); - -#endif /* CONFIG_XILINX_440 || CONFIG_XILINX_405 */ -/* Xilinx Processor Local Bus (PLB) in/out accessors */ unsigned ll_temac_xlplb_in32 (phys_addr_t base);void ll_temac_xlplb_out32 (phys_addr_t base,unsigned value);
include/configs/fx12mm.h deleted +0 -52
52 lines not on this page · raw message
include/configs/ml507.h deleted +0 -39
@@ -1,39 +0,0 @@ -/* -* (C) Copyright 2008 -* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es -* This work has been supported by: QTechnology http://qtec.com/ -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_ML507 1 -#include "../board/xilinx/ml507/xparameters.h" - -/*Mem Map*/ -#define CONFIG_SYS_SDRAM_SIZE_MB 256 - -/*Env*/ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x340000 -#define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) - -/*Misc*/ -#define CONFIG_SYS_PROMPT "ml507:/# "/* Monitor Command Prompt */ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 259 -#define MTDIDS_DEFAULT "nor0=ml507-flash" -#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> - -#endif /* __CONFIG_H */
include/configs/v5fx30teval.h deleted +0 -39
@@ -1,39 +0,0 @@ -/* -* (C) Copyright 2008 -* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es -* This work has been supported by: QTechnology http://qtec.com/ -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_ML507 1 -#include "../board/avnet/v5fx30teval/xparameters.h" - -/*Mem Map*/ -#define CONFIG_SYS_SDRAM_SIZE_MB 64 - -/*Env*/ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x1A0000 -#define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) - -/*Misc*/ -#define CONFIG_SYS_PROMPT "v5fx30t:/# "/* Monitor Command Prompt */ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (16*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 131 -#define MTDIDS_DEFAULT "nor0=v5fx30t-flash" -#define MTDPARTS_DEFAULT "mtdparts=v5fx30t-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> - -#endif /* __CONFIG_H */
include/configs/xilinx-ppc.h deleted +0 -126
126 lines not on this page · raw message
include/configs/xilinx-ppc405-generic.h deleted +0 -42
42 lines not on this page · raw message
include/configs/xilinx-ppc405.h deleted +0 -22
@@ -1,22 +0,0 @@ -/* -* -* (C) Copyright 2008 -* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es -* This work has been supported by: QTechnology http://qtec.com/ -* -* (C) Copyright 2008 -* Georg Schardt <[email protected]> -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* cpu parameter */ -#define CONFIG_405 1 -#define CONFIG_XILINX_405 1 - -#include <configs/xilinx-ppc.h> - -#endif
include/configs/xilinx-ppc440-generic.h deleted +0 -39
@@ -1,39 +0,0 @@ -/* -* (C) Copyright 2008 -* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es -* This work has been supported by: QTechnology http://qtec.com/ -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_PPC440_GENERIC 1 -#include "../board/xilinx/ppc440-generic/xparameters.h" - -/*Mem Map*/ -#define CONFIG_SYS_SDRAM_SIZE_MB 256 - -/*Env*/ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x340000 -#define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) - -/*Misc*/ -#define CONFIG_SYS_PROMPT "board:/# "/* Monitor Command Prompt */ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 259 -#define MTDIDS_DEFAULT "nor0=ml507-flash" -#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> - -#endif /* __CONFIG_H */
include/configs/xilinx-ppc440.h deleted +0 -17
@@ -1,17 +0,0 @@ -/* -* (C) Copyright 2008 -* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es -* This work has been supported by: QTechnology http://qtec.com/ -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_GEN_H -#define __CONFIG_GEN_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_440 1 - -#include <configs/xilinx-ppc.h> - -#endif /* __CONFIG_H */
Signature · 1 line
2.3.5
PATCH 1/1 ppc: xilinx: Remove ancient ppc405 and ppc440 platforms
Hi Michal,
Quoted 57 lines · Michal Simek
Remove ancient Xilinx platforms.
Signed-off-by Michal Simek <[email protected]>---
arch/powerpc/cpu/ppc4xx/Kconfig | 20 ---- arch/powerpc/cpu/ppc4xx/Makefile | 3 - arch/powerpc/cpu/ppc4xx/cpu.c | 4 - arch/powerpc/cpu/ppc4xx/speed.c | 9 +- arch/powerpc/cpu/ppc4xx/start.S | 3 +- arch/powerpc/cpu/ppc4xx/xilinx_irq.c | 89 --------------- arch/powerpc/include/asm/interrupt.h | 4 - arch/powerpc/include/asm/ppc4xx.h | 2 - arch/powerpc/include/asm/xilinx_irq.h | 25 ---- arch/powerpc/lib/board.c | 2 - board/avnet/fx12mm/Kconfig | 12 -- board/avnet/fx12mm/MAINTAINERS | 7 -- board/avnet/fx12mm/Makefile | 11 -- board/avnet/fx12mm/fx12mm.c | 34 ------ board/avnet/fx12mm/xparameters.h | 35 ------ board/avnet/v5fx30teval/Kconfig | 12 -- board/avnet/v5fx30teval/MAINTAINERS | 7 -- board/avnet/v5fx30teval/Makefile | 11 -- board/avnet/v5fx30teval/v5fx30teval.c | 17 --- board/avnet/v5fx30teval/xparameters.h | 22 ---- board/xilinx/ml507/Kconfig | 12 -- board/xilinx/ml507/MAINTAINERS | 7 -- board/xilinx/ml507/Makefile | 11 -- board/xilinx/ml507/ml507.c | 17 --- board/xilinx/ml507/xparameters.h | 23 ---- board/xilinx/ppc405-generic/Kconfig | 12 -- board/xilinx/ppc405-generic/MAINTAINERS | 7 -- board/xilinx/ppc405-generic/Makefile | 12 -- .../xilinx/ppc405-generic/xilinx_ppc405_generic.c | 48 -------- board/xilinx/ppc405-generic/xparameters.h | 25 ---- board/xilinx/ppc440-generic/Kconfig | 12 -- board/xilinx/ppc440-generic/MAINTAINERS | 7 -- board/xilinx/ppc440-generic/Makefile | 13 --- board/xilinx/ppc440-generic/init.S | 34 ------ .../xilinx/ppc440-generic/xilinx_ppc440_generic.c | 41 ------- board/xilinx/ppc440-generic/xparameters.h | 23 ---- common/board_f.c | 2 - common/cmd_bdinfo.c | 9 +- configs/fx12mm_defconfig | 4 - configs/fx12mm_flash_defconfig | 4 - configs/ml507_defconfig | 4 - configs/ml507_flash_defconfig | 4 - configs/v5fx30teval_defconfig | 4 - configs/v5fx30teval_flash_defconfig | 4 - configs/xilinx-ppc405-generic_defconfig | 4 - configs/xilinx-ppc405-generic_flash_defconfig | 4 - configs/xilinx-ppc440-generic_defconfig | 4 - configs/xilinx-ppc440-generic_flash_defconfig | 4 - drivers/net/xilinx_ll_temac.c | 15 +-- drivers/net/xilinx_ll_temac_sdma.c | 59 ---------- drivers/net/xilinx_ll_temac_sdma.h | 11 -- include/configs/fx12mm.h | 52 ---------
Quoted 8 lines
include/configs/ml507.h | 39 ------- include/configs/v5fx30teval.h | 39 ------- include/configs/xilinx-ppc.h | 126 --------------------- include/configs/xilinx-ppc405-generic.h | 42 ------- include/configs/xilinx-ppc405.h | 22 ---- include/configs/xilinx-ppc440-generic.h | 39 ------- include/configs/xilinx-ppc440.h | 17 --- 59 files changed, 9 insertions(+), 1136 deletions(-)
Nice diffstat! ;)
Looks good, so:
Acked-by Stefan Roese <[email protected]>
Thanks,
Stefan
PATCH 1/1 ppc: xilinx: Remove ancient ppc405 and ppc440 platforms
Hi Stefan
Quoted 71 lines · Stefan Roese
Hi Michal,
Quoted 59 lines · Michal Simek
Remove ancient Xilinx platforms.
Signed-off-by Michal Simek <[email protected]>---
arch/powerpc/cpu/ppc4xx/Kconfig | 20 ---- arch/powerpc/cpu/ppc4xx/Makefile | 3 - arch/powerpc/cpu/ppc4xx/cpu.c | 4 - arch/powerpc/cpu/ppc4xx/speed.c | 9 +- arch/powerpc/cpu/ppc4xx/start.S | 3 +- arch/powerpc/cpu/ppc4xx/xilinx_irq.c | 89 --------------- arch/powerpc/include/asm/interrupt.h | 4 - arch/powerpc/include/asm/ppc4xx.h | 2 - arch/powerpc/include/asm/xilinx_irq.h | 25 ---- arch/powerpc/lib/board.c | 2 - board/avnet/fx12mm/Kconfig | 12 -- board/avnet/fx12mm/MAINTAINERS | 7 -- board/avnet/fx12mm/Makefile | 11 -- board/avnet/fx12mm/fx12mm.c | 34 ------ board/avnet/fx12mm/xparameters.h | 35 ------ board/avnet/v5fx30teval/Kconfig | 12 -- board/avnet/v5fx30teval/MAINTAINERS | 7 -- board/avnet/v5fx30teval/Makefile | 11 -- board/avnet/v5fx30teval/v5fx30teval.c | 17 --- board/avnet/v5fx30teval/xparameters.h | 22 ---- board/xilinx/ml507/Kconfig | 12 -- board/xilinx/ml507/MAINTAINERS | 7 -- board/xilinx/ml507/Makefile | 11 -- board/xilinx/ml507/ml507.c | 17 --- board/xilinx/ml507/xparameters.h | 23 ---- board/xilinx/ppc405-generic/Kconfig | 12 -- board/xilinx/ppc405-generic/MAINTAINERS | 7 -- board/xilinx/ppc405-generic/Makefile | 12 -- .../xilinx/ppc405-generic/xilinx_ppc405_generic.c | 48 -------- board/xilinx/ppc405-generic/xparameters.h | 25 ---- board/xilinx/ppc440-generic/Kconfig | 12 -- board/xilinx/ppc440-generic/MAINTAINERS | 7 -- board/xilinx/ppc440-generic/Makefile | 13 --- board/xilinx/ppc440-generic/init.S | 34 ------ .../xilinx/ppc440-generic/xilinx_ppc440_generic.c | 41 ------- board/xilinx/ppc440-generic/xparameters.h | 23 ---- common/board_f.c | 2 - common/cmd_bdinfo.c | 9 +- configs/fx12mm_defconfig | 4 - configs/fx12mm_flash_defconfig | 4 - configs/ml507_defconfig | 4 - configs/ml507_flash_defconfig | 4 - configs/v5fx30teval_defconfig | 4 - configs/v5fx30teval_flash_defconfig | 4 - configs/xilinx-ppc405-generic_defconfig | 4 - configs/xilinx-ppc405-generic_flash_defconfig | 4 - configs/xilinx-ppc440-generic_defconfig | 4 - configs/xilinx-ppc440-generic_flash_defconfig | 4 - drivers/net/xilinx_ll_temac.c | 15 +-- drivers/net/xilinx_ll_temac_sdma.c | 59 ---------- drivers/net/xilinx_ll_temac_sdma.h | 11 -- include/configs/fx12mm.h | 52 --------- include/configs/ml507.h | 39 -------Quoted 8 lines
include/configs/v5fx30teval.h | 39 ------- include/configs/xilinx-ppc.h | 126 --------------------- include/configs/xilinx-ppc405-generic.h | 42 ------- include/configs/xilinx-ppc405.h | 22 ---- include/configs/xilinx-ppc440-generic.h | 39 ------- include/configs/xilinx-ppc440.h | 17 --- 59 files changed, 9 insertions(+), 1136 deletions(-)
Quoted 5 lines
Nice diffstat! ;)
Looks good, so:
Acked-by Stefan Roese <[email protected]>
Hopefully I didn't forget anything.
Thanks,
Michal