Skip to contentSkip to conversation

arm, imx6, i2c: add I2C4 for MX6DL

PATCH Superseded Heiko Schocher 2 participants 2 messages May 13, 2015 – May 15, 2015

Subsystems (3)
Arm (32-bit) Arm i.MX and Layerscape I2C

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Heiko Schocher

author
#0 lore raw

PATCH v2 1/1 arm, imx6, i2c: add I2C4 for MX6DL

add I2C4 modul for MX6DL based boards.

Signed-off-by Heiko Schocher <[email protected]>

---
checkpatch shows:
WARNING: line over 80 characters
+#define MXC_CCM_CCGR1_I2C4_SERIAL_MASK (3 << MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET)

but the hole file is full of lines longer than80 characters, so I let this line in the old style ...

Changes in v2:
- add comment from Stefano Babic
- reworked patch on base of commit f8cb101e1e3f5
- follow up patch cleans up different define naming

 arch/arm/cpu/armv7/mx6/clock.c           | 33 +++++++++++++++++++++-----------
 arch/arm/imx-common/i2c-mxv7.c           |  5 ++++-
 arch/arm/include/asm/arch-mx6/crm_regs.h |  2 ++
 arch/arm/include/asm/arch-mx6/imx-regs.h |  1 +
 drivers/i2c/mxc_i2c.c                    |  5 ++++-
 5 files changed, 33 insertions(+), 13 deletions(-)
arch/arm/cpu/armv7/mx6/clock.c +22 -11
index 055f44e..ae99945 100644
@@ -140,23 +140,34 @@ int enable_usdhc_clk(unsigned char enable, unsigned bus_num)
 #endif
 
 #ifdef CONFIG_SYS_I2C_MXC
-/* i2c_num can be from 0 - 2 */
+/* i2c_num can be from 0 - 3 */
 int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
 {
 	u32 reg;
 	u32 mask;
 
-	if (i2c_num > 2)
+	if (i2c_num > 3)
 		return -EINVAL;
-
-	mask = MXC_CCM_CCGR_CG_MASK
-		<< (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET + (i2c_num << 1));
-	reg = __raw_readl(&imx_ccm->CCGR2);
-	if (enable)
-		reg |= mask;
-	else
-		reg &= ~mask;
-	__raw_writel(reg, &imx_ccm->CCGR2);
+	if (i2c_num < 3) {
+		mask = MXC_CCM_CCGR_CG_MASK
+			<< (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET
+			+ (i2c_num << 1));
+		reg = __raw_readl(&imx_ccm->CCGR2);
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		__raw_writel(reg, &imx_ccm->CCGR2);
+	} else {
+		mask = MXC_CCM_CCGR_CG_MASK
+			<< (MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET);
+		reg = __raw_readl(&imx_ccm->CCGR1);
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		__raw_writel(reg, &imx_ccm->CCGR1);
+	}
 	return 0;
 }
 #endif
arch/arm/imx-common/i2c-mxv7.c +4 -1
index 1a632e7..33205fb 100644
@@ -67,9 +67,12 @@ static void * const i2c_bases[] = {
 #ifdef I2C3_BASE_ADDR
 	(void *)I2C3_BASE_ADDR,
 #endif
+#ifdef I2C4_BASE_ADDR
+	(void *)I2C4_BASE_ADDR,
+#endif
 };
 
-/* i2c_index can be from 0 - 2 */
+/* i2c_index can be from 0 - 3 */
 int setup_i2c(unsigned i2c_index, int speed, int slave_addr,
 	      struct i2c_pads_info *p)
 {
arch/arm/include/asm/arch-mx6/crm_regs.h +2 -0
index 0592ce0..887d048 100644
@@ -592,6 +592,8 @@ struct mxc_ccm_reg {
 #define MXC_CCM_CCGR2_I2C2_SERIAL_MASK			(3 << MXC_CCM_CCGR2_I2C2_SERIAL_OFFSET)
 #define MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET		10
 #define MXC_CCM_CCGR2_I2C3_SERIAL_MASK			(3 << MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET)
+#define MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET		8
+#define MXC_CCM_CCGR1_I2C4_SERIAL_MASK			(3 << MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET)
 #define MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET			12
 #define MXC_CCM_CCGR2_OCOTP_CTRL_MASK			(3 << MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET)
 #define MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_OFFSET		14
arch/arm/include/asm/arch-mx6/imx-regs.h +1 -0
index 9a4ad8b..3d3d137 100644
@@ -277,6 +277,7 @@
 #define UART3_BASE                  (AIPS2_OFF_BASE_ADDR + 0x6C000)
 #define UART4_BASE                  (AIPS2_OFF_BASE_ADDR + 0x70000)
 #define UART5_BASE                  (AIPS2_OFF_BASE_ADDR + 0x74000)
+#define I2C4_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x78000)
 #define IP2APB_USBPHY1_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x78000)
 #define IP2APB_USBPHY2_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x7C000)
drivers/i2c/mxc_i2c.c +4 -1
index 42782cb..c258a2b 100644
@@ -421,7 +421,10 @@ static void * const i2c_bases[] = {
 	defined(CONFIG_MX6) || defined(CONFIG_LS102XA)
 	(void *)I2C1_BASE_ADDR,
 	(void *)I2C2_BASE_ADDR,
-	(void *)I2C3_BASE_ADDR
+	(void *)I2C3_BASE_ADDR,
+#if defined(CONFIG_MX6DL)
+	(void *)I2C4_BASE_ADDR
+#endif
 #elif defined(CONFIG_VF610)
 	(void *)I2C0_BASE_ADDR
 #elif defined(CONFIG_FSL_LSCH3)
Signature · 1 line
2.1.0
#1 lore raw

PATCH v2 1/1 arm, imx6, i2c: add I2C4 for MX6DL

Quoted 124 lines · Heiko Schocher

add I2C4 modul for MX6DL based boards.

Signed-off-by Heiko Schocher <[email protected]>

---
checkpatch shows:
WARNING: line over 80 characters
+#define MXC_CCM_CCGR1_I2C4_SERIAL_MASK (3 << MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET)

but the hole file is full of lines longer than80 characters, so I let this line in the old style ...

Changes in v2:
- add comment from Stefano Babic
- reworked patch on base of commit f8cb101e1e3f5
- follow up patch cleans up different define naming

 arch/arm/cpu/armv7/mx6/clock.c           | 33 +++++++++++++++++++++-----------
 arch/arm/imx-common/i2c-mxv7.c           |  5 ++++-
 arch/arm/include/asm/arch-mx6/crm_regs.h |  2 ++
 arch/arm/include/asm/arch-mx6/imx-regs.h |  1 +
 drivers/i2c/mxc_i2c.c                    |  5 ++++-
 5 files changed, 33 insertions(+), 13 deletions(-)
arch/arm/cpu/armv7/mx6/clock.c +22 -11
index 055f44e..ae99945 100644
@@ -140,23 +140,34 @@ int enable_usdhc_clk(unsigned char enable, unsigned bus_num)
 #endif
 
 #ifdef CONFIG_SYS_I2C_MXC
-/* i2c_num can be from 0 - 2 */
+/* i2c_num can be from 0 - 3 */
 int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
 {
 	u32 reg;
 	u32 mask;
 
-	if (i2c_num > 2)
+	if (i2c_num > 3)
 		return -EINVAL;
-
-	mask = MXC_CCM_CCGR_CG_MASK
-		<< (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET + (i2c_num << 1));
-	reg = __raw_readl(&imx_ccm->CCGR2);
-	if (enable)
-		reg |= mask;
-	else
-		reg &= ~mask;
-	__raw_writel(reg, &imx_ccm->CCGR2);
+	if (i2c_num < 3) {
+		mask = MXC_CCM_CCGR_CG_MASK
+			<< (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET
+			+ (i2c_num << 1));
+		reg = __raw_readl(&imx_ccm->CCGR2);
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		__raw_writel(reg, &imx_ccm->CCGR2);
+	} else {
+		mask = MXC_CCM_CCGR_CG_MASK
+			<< (MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET);
+		reg = __raw_readl(&imx_ccm->CCGR1);
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		__raw_writel(reg, &imx_ccm->CCGR1);
+	}
 	return 0;
 }
 #endif
arch/arm/imx-common/i2c-mxv7.c +4 -1
index 1a632e7..33205fb 100644
@@ -67,9 +67,12 @@ static void * const i2c_bases[] = {
 #ifdef I2C3_BASE_ADDR
 	(void *)I2C3_BASE_ADDR,
 #endif
+#ifdef I2C4_BASE_ADDR
+	(void *)I2C4_BASE_ADDR,
+#endif
 };
 
-/* i2c_index can be from 0 - 2 */
+/* i2c_index can be from 0 - 3 */
 int setup_i2c(unsigned i2c_index, int speed, int slave_addr,
 	      struct i2c_pads_info *p)
 {
arch/arm/include/asm/arch-mx6/crm_regs.h +2 -0
index 0592ce0..887d048 100644
@@ -592,6 +592,8 @@ struct mxc_ccm_reg {
 #define MXC_CCM_CCGR2_I2C2_SERIAL_MASK			(3 << MXC_CCM_CCGR2_I2C2_SERIAL_OFFSET)
 #define MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET		10
 #define MXC_CCM_CCGR2_I2C3_SERIAL_MASK			(3 << MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET)
+#define MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET		8
+#define MXC_CCM_CCGR1_I2C4_SERIAL_MASK			(3 << MXC_CCM_CCGR1_I2C4_SERIAL_OFFSET)
 #define MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET			12
 #define MXC_CCM_CCGR2_OCOTP_CTRL_MASK			(3 << MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET)
 #define MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_OFFSET		14
arch/arm/include/asm/arch-mx6/imx-regs.h +1 -0
index 9a4ad8b..3d3d137 100644
@@ -277,6 +277,7 @@
 #define UART3_BASE                  (AIPS2_OFF_BASE_ADDR + 0x6C000)
 #define UART4_BASE                  (AIPS2_OFF_BASE_ADDR + 0x70000)
 #define UART5_BASE                  (AIPS2_OFF_BASE_ADDR + 0x74000)
+#define I2C4_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x78000)
 #define IP2APB_USBPHY1_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x78000)
 #define IP2APB_USBPHY2_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x7C000)
drivers/i2c/mxc_i2c.c +0 -0
index 42782cb..c258a2b 100644
@@ -421,7 +421,10 @@ static void * const i2c_bases[] = {
 	defined(CONFIG_MX6) || defined(CONFIG_LS102XA)

drivers/i2c/mxc_i2c.c static void * const i2c_bases[] = { · line 430

Quoted 10 lines
drivers/i2c/mxc_i2c.c +4 -1
 	(void *)I2C1_BASE_ADDR,
 	(void *)I2C2_BASE_ADDR,
-	(void *)I2C3_BASE_ADDR
+	(void *)I2C3_BASE_ADDR,
+#if defined(CONFIG_MX6DL)
+	(void *)I2C4_BASE_ADDR
+#endif
 #elif defined(CONFIG_VF610)
 	(void *)I2C0_BASE_ADDR
 #elif defined(CONFIG_FSL_LSCH3)

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================