Experiencing FIFO underruns on Intel Skylake platform
Hi,
I'm testing the vanilla kernel on prototype boards for Intel Skylake. The graphics adapter on those boards identifies like this:
00:02.0 0300: 8086:1912 (rev 04) (prog-if 00 [VGA controller])
Subsystem: 1734:121c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 123
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF
Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF
Disabled
Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00018 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] #1b
Capabilities: [200 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [300 v1] #13
Kernel driver in use: i915
Kernel modules: i915
I'm running both Fedora 21 and OpenSUSE 13.2 on those boards at the moment, both with a self compiled Kernel 4.1-rc4 (latest git pull was today).
Problem: Whenever power management kicks in and blanks the screen the systems behave very strange when trying to get the screen back. The screen is not fully restored then, but when I move the mouse (Gnome 3 or XFCE desktops) up and down the image rolls up and down like a curtain. I see no mouse cursor anymore and can't resume to normal operation.
When this happens I see the following line in dmesg:
[drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
Hardware is still the first prototypes for Skylake, BIOS is beta too. But I wanted to give a note about that problem here, maybe someone has an idea what is missing.
Regards
Rainer
Signature · 19 lines
Dipl.-Inf. (FH) Rainer Koenig Project Manager Linux Clients Dept. PDG WPS R&D SW OSE Fujitsu Technology Solutions Bürgermeister-Ullrich-Str. 100 86199 Augsburg Germany Telephone: +49-821-804-3321 Telefax: +49-821-804-2131 Mail: mailto:[email protected] Internet ts.fujtsu.com Company Details ts.fujitsu.com/imprint.html _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
+intel-gfx
Quoted 53 lines · Rainer Koenig
Hi,
I'm testing the vanilla kernel on prototype boards for Intel Skylake. The graphics adapter on those boards identifies like this:
00:02.0 0300: 8086:1912 (rev 04) (prog-if 00 [VGA controller])
Subsystem: 1734:121c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 123
Region 0: Memory atd0000000(64-bit, non-prefetchable) [size=16M] Region 2: Memory atc0000000(64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF
Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF
Disabled
Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address:fee00018Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] #1b
Capabilities: [200 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [300 v1] #13
Kernel driver in use: i915
Kernel modules: i915I'm running both Fedora 21 and OpenSUSE 13.2 on those boards at the moment, both with a self compiled Kernel 4.1-rc4 (latest git pull was today).
Problem: Whenever power management kicks in and blanks the screen the systems behave very strange when trying to get the screen back. The screen is not fully restored then, but when I move the mouse (Gnome 3 or XFCE desktops) up and down the image rolls up and down like a curtain. I see no mouse cursor anymore and can't resume to normal operation.
Quoted 8 lines
When this happens I see the following line in dmesg:
[drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
Hardware is still the first prototypes for Skylake, BIOS is beta too. But I wanted to give a note about that problem here, maybe someone has an idea what is missing.
For brand new platforms you should be running drm-intel-nightly branch from http://cgit.freedesktop.org/drm-intel.
Double check that you have either i915.preliminary_hw_support=1 module parameter set or CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT=y config option set.
BR,
Jani.
Quoted 23 lines
Regards
RainerSignature · 19 lines
Dipl.-Inf. (FH) Rainer Koenig Project Manager Linux Clients Dept. PDG WPS R&D SW OSE Fujitsu Technology Solutions Bürgermeister-Ullrich-Str. 100 86199 Augsburg Germany Telephone: +49-821-804-3321 Telefax: +49-821-804-2131 Mail: mailto:[email protected] Internet ts.fujtsu.com Company Details ts.fujitsu.com/imprint.html _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Am 19.05.2015 um 13:41 schrieb Jani Nikula:
Quoted 3 lines
For brand new platforms you should be running drm-intel-nightly branch from http://cgit.freedesktop.org/drm-intel.
Thanks, will try out next.
Quoted 3 lines
Double check that you have either i915.preliminary_hw_support=1 module parameter set or
CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT=yconfig option set.
ACK. That option is set (otherwise the audio-driver wouldn't work. :-)
Regards,
Rainer
Signature · 19 lines
Dipl.-Inf. (FH) Rainer Koenig Project Manager Linux Clients Dept. PDG WPS R&D SW OSE Fujitsu Technology Solutions Bürgermeister-Ullrich-Str. 100 86199 Augsburg Germany Telephone: +49-821-804-3321 Telefax: +49-821-804-2131 Mail: mailto:[email protected] Internet ts.fujtsu.com Company Details ts.fujitsu.com/imprint.html _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Am 19.05.2015 um 13:41 schrieb Jani Nikula:
Quoted 5 lines
+intel-gfx
For brand new platforms you should be running drm-intel-nightly branch from http://cgit.freedesktop.org/drm-intel.
Tested now, drm-intel-nightly solves the problem.
Thanks a lot
Rainer
Signature · 19 lines
Dipl.-Inf. (FH) Rainer Koenig Project Manager Linux Clients Dept. PDG WPS R&D SW OSE Fujitsu Technology Solutions Bürgermeister-Ullrich-Str. 100 86199 Augsburg Germany Telephone: +49-821-804-3321 Telefax: +49-821-804-2131 Mail: mailto:[email protected] Internet ts.fujtsu.com Company Details ts.fujitsu.com/imprint.html _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 10 lines · Rainer Koenig
Am 19.05.2015 um 13:41 schrieb Jani Nikula:
Quoted 5 lines
+intel-gfx
For brand new platforms you should be running drm-intel-nightly branch from http://cgit.freedesktop.org/drm-intel.
Tested now, drm-intel-nightly solves the problem.
Thanks a lot
Great, thanks for reporting back.
BR,
Jani.
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx