treewide: Fix typo in printk
Subsystems (13)
PATCH 1/1 treewide: Fix typo in printk
This patch fixed spelling typo found in various part of sources.
Signed-off-by Masanari Iida <[email protected]>
--- arch/powerpc/sysdev/fsl_pci.c | 2 +- drivers/crypto/img-hash.c | 2 +- drivers/input/touchscreen/ili210x.c | 4 ++-- drivers/isdn/mISDN/dsp_cmx.c | 2 +- drivers/mailbox/arm_mhu.c | 2 +- drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 4 ++-- drivers/regulator/max77843.c | 2 +- drivers/target/target_core_device.c | 2 +- drivers/usb/dwc2/core.c | 2 +- fs/ecryptfs/mmap.c | 2 +- lib/test_rhashtable.c | 2 +- 11 files changed, 13 insertions(+), 13 deletions(-)
arch/powerpc/sysdev/fsl_pci.c +1 -1
@@ -1113,7 +1113,7 @@ static int fsl_pci_pme_probe(struct pci_controller *hose)IRQF_SHARED , "[PCI] PME", hose);if (res <0 ) { -dev_err (&dev->dev,"Unable to requiest irq %d for PME\n" , pme_irq); +dev_err (&dev->dev,"Unable to request irq %d for PME\n" , pme_irq);irq_dispose_mapping (pme_irq);return -ENODEV ;
drivers/crypto/img-hash.c +1 -1
@@ -334,7 +334,7 @@ static int img_hash_dma_init(struct img_hash_dev *hdev) hdev->dma_lch =dma_request_slave_channel (hdev->dev,"tx" );if (!hdev->dma_lch) { -dev_err (hdev->dev,"Couldn't aquire a slave DMA channel.\n" ); +dev_err (hdev->dev,"Couldn't acquire a slave DMA channel.\n" );return -EBUSY ; } dma_conf.direction =DMA_MEM_TO_DEV ;
drivers/input/touchscreen/ili210x.c +2 -2
@@ -216,7 +216,7 @@ static int ili210x_i2c_probe(struct i2c_client *client,/* get panel info */ error =ili210x_read_reg (client,REG_PANEL_INFO , &panel,sizeof (panel));if (error) { -dev_err (dev,"Failed to get panel informations, err: %d\n" , +dev_err (dev,"Failed to get panel information, err: %d\n" , error);return error; }
@@ -276,7 +276,7 @@ static int ili210x_i2c_probe(struct i2c_client *client, error =input_register_device (priv->input);if (error) { -dev_err (dev,"Cannot regiser input device, err: %d\n" , error); +dev_err (dev,"Cannot register input device, err: %d\n" , error); goto err_remove_sysfs; }
drivers/isdn/mISDN/dsp_cmx.c +1 -1
@@ -506,7 +506,7 @@ dsp_cmx_hardware(struct dsp_conf *conf, struct dsp *dsp) __func__, conf->id);if (list_empty (&conf->mlist)) { -printk (KERN_ERR "%s: conference whithout members\n" , +printk (KERN_ERR "%s: conference without members\n" , __func__);return ; }
drivers/mailbox/arm_mhu.c +1 -1
@@ -96,7 +96,7 @@ static int mhu_startup(struct mbox_chan *chan) IRQF_SHARED, "mhu_link", chan);if (ret) {dev_err (chan->mbox->dev, -"Unable to aquire IRQ %d\n" , mlink->irq); +"Unable to acquire IRQ %d\n" , mlink->irq);return ret; }
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +2 -2
@@ -436,7 +436,7 @@ static int s5p_mfc_set_dec_frame_buffer_v6(struct s5p_mfc_ctx *ctx)mfc_debug (2 ,"Buf1: %p (%d)\n" , (void *)buf_addr1, buf_size1);mfc_debug (2 ,"Total DPB COUNT: %d\n" , ctx->total_dpb_count); -mfc_debug (2 ,"Setting display delay to %d\n" , ctx->display_delay); +mfc_debug (2 ,"Seting display delay to %d\n" , ctx->display_delay);writel (ctx->total_dpb_count, mfc_regs->d_num_dpb);writel (ctx->luma_size, mfc_regs->d_first_plane_dpb_size);
@@ -1734,7 +1734,7 @@ static void s5p_mfc_try_run_v6(struct s5p_mfc_dev *dev)mfc_debug (1 ,"New context: %d\n" , new_ctx); ctx = dev->ctx[new_ctx]; -mfc_debug (1 ,"Seting new context to %p\n" , ctx); +mfc_debug (1 ,"Setting new context to %p\n" , ctx);/* Got context to run in ctx */ mfc_debug (1 ,"ctx->dst_queue_cnt=%d ctx->dpb_count=%d ctx->src_queue_cnt=%d\n" , ctx->dst_queue_cnt, ctx->pb_count, ctx->src_queue_cnt);
drivers/regulator/max77843.c +1 -1
@@ -188,7 +188,7 @@ static int max77843_regulator_probe(struct platform_device *pdev) &max77843_supported_regulators[i], &config);if (IS_ERR (regulator)) {dev_err (&pdev->dev, -"Failed to regiser regulator-%d\n" , i); +"Failed to register regulator-%d\n" , i);return PTR_ERR (regulator); } }
drivers/target/target_core_device.c +1 -1
@@ -1086,7 +1086,7 @@ EXPORT_SYMBOL(se_dev_set_is_nonrot);int se_dev_set_emulate_rest_reord (struct se_device *dev,int flag) {if (flag !=0 ) { -printk (KERN_ERR "dev[%p]: SE Device emulatation of restricted" +printk (KERN_ERR "dev[%p]: SE Device emulation of restricted" " reordering not implemented\n" , dev);return -ENOSYS ; }
drivers/usb/dwc2/core.c +1 -1
@@ -2779,7 +2779,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) hw->hs_phy_type);dev_dbg (hsotg->dev," fs_phy_type=%d\n" , hw->fs_phy_type); -dev_dbg (hsotg->dev," utmi_phy_data_wdith=%d\n" , +dev_dbg (hsotg->dev," utmi_phy_data_width=%d\n" , hw->utmi_phy_data_width);dev_dbg (hsotg->dev," num_dev_ep=%d\n" , hw->num_dev_ep);
fs/ecryptfs/mmap.c +1 -1
@@ -299,7 +299,7 @@ static int ecryptfs_write_begin(struct file *file, rc =ecryptfs_read_lower_page_segment ( page, index,0 ,PAGE_CACHE_SIZE , mapping->host);if (rc) { -printk (KERN_ERR "%s: Error attemping to read " +printk (KERN_ERR "%s: Error attempting to read " "lower page segment; rc = [%d]\n" , __func__, rc);ClearPageUptodate (page);
lib/test_rhashtable.c +1 -1
@@ -102,7 +102,7 @@ static void test_bucket_stats(struct rhashtable *ht, bool quiet) rcu_cnt++;if (rcu_cnt != cnt) -pr_warn ("Test failed: Chain count mismach %d != %d" , +pr_warn ("Test failed: Chain count mismatch %d != %d" , cnt, rcu_cnt);if (!quiet)
Signature · 1 line
2.4.0.53.g8440f74
Quoted 22 lines · Masanari Iida
This patch fixed spelling typo found in various part of sources.
Signed-off-by Masanari Iida <[email protected]>--- arch/powerpc/sysdev/fsl_pci.c | 2 +- drivers/crypto/img-hash.c | 2 +- drivers/input/touchscreen/ili210x.c | 4 ++-- drivers/isdn/mISDN/dsp_cmx.c | 2 +- drivers/mailbox/arm_mhu.c | 2 +- drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 4 ++-- drivers/regulator/max77843.c | 2 +- drivers/target/target_core_device.c | 2 +- drivers/usb/dwc2/core.c | 2 +- fs/ecryptfs/mmap.c | 2 +- lib/test_rhashtable.c | 2 +- 11 files changed, 13 insertions(+), 13 deletions(-)drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +0
-0
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c static int s5p_mfc_set_dec_frame_buffer_v6(struct s5p_mfc_ctx *ctx) · line 439
Quoted 5 lines
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +1
-1@@ -436,7 +436,7 @@ static int s5p_mfc_set_dec_frame_buffer_v6(struct s5p_mfc_ctx *ctx)mfc_debug (2 ,"Buf1: %p (%d)\n" , (void *)buf_addr1, buf_size1);mfc_debug (2 ,"Total DPB COUNT: %d\n" , ctx->total_dpb_count); -mfc_debug (2 ,"Setting display delay to %d\n" , ctx->display_delay); +mfc_debug (2 ,"Seting display delay to %d\n" , ctx->display_delay);
oops!
Quoted 3 lines
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +0
-0writel (ctx->total_dpb_count, mfc_regs->d_num_dpb);writel (ctx->luma_size, mfc_regs->d_first_plane_dpb_size);
Signature · 1 line
~Randy
This patch fix spelling typo inv various part of sources.
Signed-off-by Masanari Iida <[email protected]>
--- arch/powerpc/sysdev/fsl_pci.c | 2 +- drivers/crypto/img-hash.c | 2 +- drivers/input/touchscreen/ili210x.c | 4 ++-- drivers/isdn/mISDN/dsp_cmx.c | 2 +- drivers/mailbox/arm_mhu.c | 2 +- drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 2 +- drivers/regulator/max77843.c | 2 +- drivers/target/target_core_device.c | 2 +- drivers/usb/dwc2/core.c | 2 +- fs/ecryptfs/mmap.c | 2 +- lib/test_rhashtable.c | 2 +- 11 files changed, 12 insertions(+), 12 deletions(-)
arch/powerpc/sysdev/fsl_pci.c +1 -1
@@ -1113,7 +1113,7 @@ static int fsl_pci_pme_probe(struct pci_controller *hose)IRQF_SHARED , "[PCI] PME", hose);if (res <0 ) { -dev_err (&dev->dev,"Unable to requiest irq %d for PME\n" , pme_irq); +dev_err (&dev->dev,"Unable to request irq %d for PME\n" , pme_irq);irq_dispose_mapping (pme_irq);return -ENODEV ;
drivers/crypto/img-hash.c +1 -1
@@ -334,7 +334,7 @@ static int img_hash_dma_init(struct img_hash_dev *hdev) hdev->dma_lch =dma_request_slave_channel (hdev->dev,"tx" );if (!hdev->dma_lch) { -dev_err (hdev->dev,"Couldn't aquire a slave DMA channel.\n" ); +dev_err (hdev->dev,"Couldn't acquire a slave DMA channel.\n" );return -EBUSY ; } dma_conf.direction =DMA_MEM_TO_DEV ;
drivers/input/touchscreen/ili210x.c +2 -2
@@ -216,7 +216,7 @@ static int ili210x_i2c_probe(struct i2c_client *client,/* get panel info */ error =ili210x_read_reg (client,REG_PANEL_INFO , &panel,sizeof (panel));if (error) { -dev_err (dev,"Failed to get panel informations, err: %d\n" , +dev_err (dev,"Failed to get panel information, err: %d\n" , error);return error; }
@@ -276,7 +276,7 @@ static int ili210x_i2c_probe(struct i2c_client *client, error =input_register_device (priv->input);if (error) { -dev_err (dev,"Cannot regiser input device, err: %d\n" , error); +dev_err (dev,"Cannot register input device, err: %d\n" , error); goto err_remove_sysfs; }
drivers/isdn/mISDN/dsp_cmx.c +1 -1
@@ -506,7 +506,7 @@ dsp_cmx_hardware(struct dsp_conf *conf, struct dsp *dsp) __func__, conf->id);if (list_empty (&conf->mlist)) { -printk (KERN_ERR "%s: conference whithout members\n" , +printk (KERN_ERR "%s: conference without members\n" , __func__);return ; }
drivers/mailbox/arm_mhu.c +1 -1
@@ -96,7 +96,7 @@ static int mhu_startup(struct mbox_chan *chan) IRQF_SHARED, "mhu_link", chan);if (ret) {dev_err (chan->mbox->dev, -"Unable to aquire IRQ %d\n" , mlink->irq); +"Unable to acquire IRQ %d\n" , mlink->irq);return ret; }
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +1 -1
@@ -1734,7 +1734,7 @@ static void s5p_mfc_try_run_v6(struct s5p_mfc_dev *dev)mfc_debug (1 ,"New context: %d\n" , new_ctx); ctx = dev->ctx[new_ctx]; -mfc_debug (1 ,"Seting new context to %p\n" , ctx); +mfc_debug (1 ,"Setting new context to %p\n" , ctx);/* Got context to run in ctx */ mfc_debug (1 ,"ctx->dst_queue_cnt=%d ctx->dpb_count=%d ctx->src_queue_cnt=%d\n" , ctx->dst_queue_cnt, ctx->pb_count, ctx->src_queue_cnt);
drivers/regulator/max77843.c +1 -1
@@ -188,7 +188,7 @@ static int max77843_regulator_probe(struct platform_device *pdev) &max77843_supported_regulators[i], &config);if (IS_ERR (regulator)) {dev_err (&pdev->dev, -"Failed to regiser regulator-%d\n" , i); +"Failed to register regulator-%d\n" , i);return PTR_ERR (regulator); } }
drivers/target/target_core_device.c +1 -1
@@ -1086,7 +1086,7 @@ EXPORT_SYMBOL(se_dev_set_is_nonrot);int se_dev_set_emulate_rest_reord (struct se_device *dev,int flag) {if (flag !=0 ) { -printk (KERN_ERR "dev[%p]: SE Device emulatation of restricted" +printk (KERN_ERR "dev[%p]: SE Device emulation of restricted" " reordering not implemented\n" , dev);return -ENOSYS ; }
drivers/usb/dwc2/core.c +1 -1
@@ -2779,7 +2779,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) hw->hs_phy_type);dev_dbg (hsotg->dev," fs_phy_type=%d\n" , hw->fs_phy_type); -dev_dbg (hsotg->dev," utmi_phy_data_wdith=%d\n" , +dev_dbg (hsotg->dev," utmi_phy_data_width=%d\n" , hw->utmi_phy_data_width);dev_dbg (hsotg->dev," num_dev_ep=%d\n" , hw->num_dev_ep);
fs/ecryptfs/mmap.c +1 -1
@@ -299,7 +299,7 @@ static int ecryptfs_write_begin(struct file *file, rc =ecryptfs_read_lower_page_segment ( page, index,0 ,PAGE_CACHE_SIZE , mapping->host);if (rc) { -printk (KERN_ERR "%s: Error attemping to read " +printk (KERN_ERR "%s: Error attempting to read " "lower page segment; rc = [%d]\n" , __func__, rc);ClearPageUptodate (page);
lib/test_rhashtable.c +1 -1
@@ -102,7 +102,7 @@ static void test_bucket_stats(struct rhashtable *ht, bool quiet) rcu_cnt++;if (rcu_cnt != cnt) -pr_warn ("Test failed: Chain count mismach %d != %d" , +pr_warn ("Test failed: Chain count mismatch %d != %d" , cnt, rcu_cnt);if (!quiet)
Signature · 1 line
2.4.0.53.g8440f74
Randy Dunlap
Acked-byQuoted 17 lines · Masanari Iida
This patch fix spelling typo inv various part of sources.
Signed-off-by Masanari Iida <[email protected]>--- arch/powerpc/sysdev/fsl_pci.c | 2 +- drivers/crypto/img-hash.c | 2 +- drivers/input/touchscreen/ili210x.c | 4 ++-- drivers/isdn/mISDN/dsp_cmx.c | 2 +- drivers/mailbox/arm_mhu.c | 2 +- drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 2 +- drivers/regulator/max77843.c | 2 +- drivers/target/target_core_device.c | 2 +- drivers/usb/dwc2/core.c | 2 +- fs/ecryptfs/mmap.c | 2 +- lib/test_rhashtable.c | 2 +- 11 files changed, 12 insertions(+), 12 deletions(-)
Acked-by Randy Dunlap <[email protected]>
Thanks.
Signature · 1 line
~Randy