arm: ls102xa: Adjust the load address of U-Boot for NOR boot
PATCH 1/1 arm: ls102xa: Adjust the load address of U-Boot for NOR boot
The original load address of U-Boot is 0x67f80000. The address space of NOR flash is 0x60000000 to 0x67ffffff. It will cause the size of u-boot couldn't be larger than 512K. As more features are supported in u-boot, the size of u-boot is larger than 512K.
To fix this issue, the load address of U-Boot for NOR boot is adjusted to 0x60100000.
In RCW, the PBI command needs to change as follows:
.pbi
-write 0xee0200, 0x67f80000
+write 0xee0200, 0x60100000
.end
--- include/configs/ls1021aqds.h | 2 +- include/configs/ls1021atwr.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
include/configs/ls1021aqds.h +1 -1
@@ -124,7 +124,7 @@ unsigned long get_board_ddr_clk(void);#endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x67f80000 +#define CONFIG_SYS_TEXT_BASE 0x60100000#endif #define CONFIG_NR_DRAM_BANKS 1
include/configs/ls1021atwr.h +1 -1
@@ -73,7 +73,7 @@#endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x67f80000 +#define CONFIG_SYS_TEXT_BASE 0x60100000#endif #define CONFIG_NR_DRAM_BANKS 1
Signature · 1 line
2.1.0.27.g96db324
PATCH 1/1 arm: ls102xa: Adjust the load address of U-Boot for NOR boot
Quoted 14 lines · Alison Wang
The original load address of U-Boot is
0x67f80000. The address space of NOR flash is0x60000000to0x67ffffff. It will cause the size of u-boot couldn't be larger than 512K. As more features are supported in u-boot, the size of u-boot is larger than 512K.To fix this issue, the load address of U-Boot for NOR boot is adjusted to
0x60100000.In RCW, the PBI command needs to change as follows:
.pbi(quoted diff) +1
-1-write 0xee0200, 0x67f80000 +write 0xee0200, 0x60100000 .end
Quoted 2 lines
Signed-off-by Alison Wang <[email protected]>---
Applied to u-boot-fsl-qoriq master. Awaiting upstream.
York