ARM: socfpga: dts: add the a9-scu node for arria10
PATCH 1/1 ARM: socfpga: dts: add the a9-scu node for arria10
From: Dinh Nguyen <[email protected]>
Add a dts node for the A9 SCU on the Arria10 platform.
Signed-off-by Dinh Nguyen <[email protected]>
--- arch/arm/boot/dts/socfpga_arria10.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/boot/dts/socfpga_arria10.dtsi +5 -0
@@ -567,6 +567,11 @@ reg = <0xffd05000 0x100>; }; + scu: snoop-control-unit at ffffc000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xffffc000 0x100>; + }; + sysmgr: sysmgr at ffd06000 { compatible = "altr,sys-mgr", "syscon"; reg = <0xffd06000 0x300>;
Signature · 1 line
2.2.1
PATCH 1/1 ARM: socfpga: dts: add the a9-scu node for arria10
Hi Arnd, Kevin, Olof:
Quoted 16 lines · dinguyen at opensource.altera.com
From: Dinh Nguyen <[email protected]>
Add a dts node for the A9 SCU on the Arria10 platform.
Signed-off-by Dinh Nguyen <[email protected]>--- arch/arm/boot/dts/socfpga_arria10.dtsi | 5 +++++ 1 file changed, 5 insertions(+)arch/arm/boot/dts/socfpga_arria10.dtsi +0
-0@@ -567,6 +567,11 @@ reg = <0xffd05000 0x100>;
arch/arm/boot/dts/socfpga_arria10.dtsi line 577
Quoted 10 lines
arch/arm/boot/dts/socfpga_arria10.dtsi +5
-0}; + scu: snoop-control-unit at ffffc000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xffffc000 0x100>; + }; + sysmgr: sysmgr at ffd06000 { compatible = "altr,sys-mgr", "syscon"; reg = <0xffd06000 0x300>;
Can you please apply this patch to your next/dt?
Thanks,
Dinh