Skip to contentSkip to conversation

Configuring ath10k device driver supporting 802.11ac and IBSS

DISCUSSION Sangwoo Moon 2 participants 2 messages Jun 7, 2015 – Jun 8, 2015 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore
#0 lore raw

Hello,

I am currently trying to configure ath10k device to support 802.11ac VHT functionality in IBSS mode.

I am using Qualcomm Atheros QCA988x 802.11ac network adapter in Gigabyte M1405 laptop.
I am using Ubuntu 14.04.2 (kernel version 3.16.0-30-generic) as main operating system, and using backports-3.16-rc1-1 as ath10k device driver.

As far as I know, I can use iw to configure a WLAN interface
into IBSS mode (ad-hoc mode),
and hostapd to configure the interface enabling 802.11ac VHT functionalities.

However, what I want to do is enabling 802.11ac VHT features, in IBSS mode.

After series of searching, I could not find any solutions to
neither turn on VHT mode in iw nor using IBSS mode in hostapd.
I used the latest version of iw (4.1) and hostapd (2.4) trying to solve this issue. I also installed the latest wireless-regdb-2015.06.05 to mitigate
the regulatory issue in frequency band selection.

Is there anyone who can help with this issue?
Thanks in advance.

Best regards,
--Sangwoo Moon

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#1 lore raw
Quoted 26 lines · Sangwoo Moon

Hello,

I am currently trying to configure ath10k device to support 802.11ac VHT functionality in IBSS mode.

I am using Qualcomm Atheros QCA988x 802.11ac network adapter in Gigabyte M1405 laptop.
I am using Ubuntu 14.04.2 (kernel version 3.16.0-30-generic) as main operating system, and using backports-3.16-rc1-1 as ath10k device driver.

As far as I know, I can use iw to configure a WLAN interface into IBSS mode (ad-hoc mode),
and hostapd to configure the interface enabling 802.11ac VHT functionalities.

However, what I want to do is enabling 802.11ac VHT features, in IBSS mode.

After series of searching, I could not find any solutions to neither turn on VHT mode in iw nor using IBSS mode in hostapd.
I used the latest version of iw (4.1) and hostapd (2.4) trying to solve this issue.
I also installed the latest wireless-regdb-2015.06.05 to mitigate the regulatory issue in frequency band selection.

Quoted 2 lines

Is there anyone who can help with this issue?
Thanks in advance.

Apply [PATCH] ath10k: enable VHT for IBSS.
Next configure ibss from wpa_supplicant.
Check iw wlanX info if bw=80MHz used.

I think iw don't support VHT yet, so wpa_supplicant is best choice here.

BR
Janusz

Quoted 7 lines

Best regards,
--Sangwoo Moon

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k