Skip to contentSkip to conversation

ntimed: add recipe to meta-networking (git version)

PATCH In review Christopher Larson 4 participants 5 messages May 31, 2015 – Jun 14, 2015

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ntimed: add recipe to meta-networking (git version)

Ntimed is an unreleased ntpd replacement being sponsored by the Linux Foundation. Currently it only includes a work-in-progress client, but for future use this recipe emits an ntimed-client package and an ntimed meta package which will pull in client and server.

---
 .../ntimed/ntimed/use-ldflags.patch                | 16 +++++++++
 .../recipes-support/ntimed/ntimed_git.bb           | 41 ++++++++++++++++++++++
 2 files changed, 57 insertions(+)
 create mode 100644 meta-networking/recipes-support/ntimed/ntimed/use-ldflags.patch
 create mode 100644 meta-networking/recipes-support/ntimed/ntimed_git.bb
meta-networking/recipes-support/ntimed/ntimed/use-ldflags.patch new file +16 -0
new file mode 100644
index 0000000..87a7778
@@ -0,0 +1,16 @@
+Obey LDFLAGS.
+
+Signed-off-by: Christopher Larson <[email protected]>
+Upstream-Status: Pending
+
+--- Ntimed.orig/configure	2015-05-30 11:57:59.927796993 -0700
++++ Ntimed/configure	2015-05-30 11:58:26.143948894 -0700
+@@ -142,7 +142,7 @@
+ 
+ 	echo
+ 	echo "ntimed-client:	${l}"
+-	echo "	\${CC} \${CFLAGS} -o ntimed-client ${l} -lm"
++	echo "	\${CC} \${CFLAGS} -o ntimed-client ${l} \${LDFLAGS} -lm"
+ 	echo
+ 	echo "clean:"
+ 	echo "	rm -f ${l} ntimed-client"
meta-networking/recipes-support/ntimed/ntimed_git.bb new file +41 -0

41 lines not on this page · raw message

Signature · 1 line
2.2.1
#1 lore raw
Quoted 5 lines · Christopher Larson

Ntimed is an unreleased ntpd replacement being sponsored by the Linux Foundation. Currently it only includes a work-in-progress client, but for future use this recipe emits an ntimed-client package and an ntimed meta package which will pull in client and server.

should it have RCONFLICTS with ntp ?

Quoted 85 lines
---
 .../ntimed/ntimed/use-ldflags.patch                | 16 +++++++++
 .../recipes-support/ntimed/ntimed_git.bb           | 41 ++++++++++++++++++++++
 2 files changed, 57 insertions(+)
 create mode 100644 meta-networking/recipes-support/ntimed/ntimed/use-ldflags.patch
 create mode 100644 meta-networking/recipes-support/ntimed/ntimed_git.bb
meta-networking/recipes-support/ntimed/ntimed/use-ldflags.patch new file +16 -0
new file mode 100644
index 0000000..87a7778
@@ -0,0 +1,16 @@
+Obey LDFLAGS.
+
+Signed-off-by: Christopher Larson <[email protected]>
+Upstream-Status: Pending
+
+--- Ntimed.orig/configure      2015-05-30 11:57:59.927796993 -0700
++++ Ntimed/configure   2015-05-30 11:58:26.143948894 -0700
+@@ -142,7 +142,7 @@
+
+       echo
+       echo "ntimed-client:    ${l}"
+-      echo "  \${CC} \${CFLAGS} -o ntimed-client ${l} -lm"
++      echo "  \${CC} \${CFLAGS} -o ntimed-client ${l} \${LDFLAGS} -lm"
+       echo
+       echo "clean:"
+       echo "  rm -f ${l} ntimed-client"
meta-networking/recipes-support/ntimed/ntimed_git.bb new file +41 -1
new file mode 100644
index 0000000..0990541
@@ -0,0 +1,41 @@
+SUMMARY = "Network time synchronization software, NTPD replacement"
+DESCRIPTION = "This is a preview/early-access/alpha/buzzword-of-the-times \
+release of a new FOSS project written to gradually take over the world of \
+networked timekeeping."
+HOMEPAGE = "https://github.com/bsdphk/Ntimed"
+SECTION = "console/network"
+
+LICENSE = "BSD-2-Clause"
+LIC_FILES_CHKSUM = "file://main.c;startline=2;endline=24;md5=eda11d21005319bb76cbb6f911f0f66d"
+
+SRC_URI = "git://github.com/bsdphk/Ntimed \
+           file://use-ldflags.patch"
+
+PV = "0.0+git${SRCPV}"
+SRCREV = "db0abbb4c80f2ecef6bc5d9639bca5bea28532a2"
+
+S = "${WORKDIR}/git"
+
+EXTRA_OEMAKE = "\
+    'CC=${CC}' \
+    'CFLAGS=${CFLAGS}' \
+    'LDFLAGS=${LDFLAGS}' \
+"
+
+do_configure () {
+    sh ./configure
+}
+
+do_compile () {
+    oe_runmake
+}
+
+do_install () {
+    install -D -m 0755 ntimed-client ${D}${sbindir}/ntimed-client
+}
+
+ALLOW_EMPTY_${PN} = "1"
+RDEPENDS_${PN} += "ntimed-client"
+
+PACKAGE_BEFORE_PN += "ntimed-client"
+FILES_ntimed-client = "${sbindir}/ntimed-client"
--

2.2.1

--
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-devel

#2 lore raw
Quoted 9 lines · Khem Raj
Quoted 5 lines · Christopher Larson

Ntimed is an unreleased ntpd replacement being sponsored by the Linux Foundation. Currently it only includes a work-in-progress client, but for future use this recipe emits an ntimed-client package and an ntimed meta package which will pull in client and server.

should it have RCONFLICTS with ntp ?

Probably, I’ll look into that as well as see about adding a service file & startup script, and re-submit after testing that. Thanks.

Signature · 5 lines
Christopher Larson
clarson at kergoth dot com
Founder - BitBake, OpenEmbedded, OpenZaurus
Maintainer - Tslib
Senior Software Engineer, Mentor Graphics
#3 lore raw
Quoted 10 lines · Christopher Larson
Quoted 8 lines · Khem Raj
Quoted 5 lines · Christopher Larson

Ntimed is an unreleased ntpd replacement being sponsored by the Linux Foundation. Currently it only includes a work-in-progress client, but for future use this recipe emits an ntimed-client package and an ntimed meta package which will pull in client and server.

Quoted 5 lines
Quoted 1 line

should it have RCONFLICTS with ntp ?

Probably, I’ll look into that as well as see about adding a service file & startup script, and re-submit after testing that. Thanks.

FYI, it had been merged.

// Robert

Quoted 1 line
#4 lore raw
Quoted 20 lines · Robert Yang
Quoted 17 lines · Christopher Larson
Quoted 11 lines · Khem Raj
Quoted 7 lines · Christopher Larson

Ntimed is an unreleased ntpd replacement being sponsored by the Linux Foundation. Currently it only includes a work-in-progress client, but for
future use this recipe emits an ntimed-client package and an ntimed meta package which will pull in client and server.

should it have RCONFLICTS with ntp ?

Quoted 5 lines
Quoted 2 lines

Probably, I’ll look into that as well as see about adding a service file & startup script, and re-submit after testing that. Thanks.

FYI, it had been merged.

Still a followup would be nice if its needed.

Quoted 10 lines

// Robert

Quoted 1 line

--
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-devel