tbs2910: add thermal support
PATCH 1/2 tbs2910: add thermal support
Signed-off-by Soeren Moch <[email protected]>
---
Cc: Stefano Babic <[email protected]>
--- configs/tbs2910_defconfig | 2 ++ include/configs/tbs2910.h | 2 ++ 2 files changed, 4 insertions(+)
configs/tbs2910_defconfig +2 -0
@@ -1,3 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_TBS2910=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q" +CONFIG_DM=y +CONFIG_DM_THERMAL=y
include/configs/tbs2910.h +2 -0
@@ -21,6 +21,8 @@#define CONFIG_SYS_PROMPT "Matrix U-Boot> "#define CONFIG_SYS_HZ 1000 +#define CONFIG_IMX6_THERMAL +/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
Signature · 1 line
1.9.1
PATCH 2/2 tbs2910: add PRE_CONSOLE_BUFFER support
Add PRE_CONSOLE_BUFFER support to display early boot messages over HDMI.
Signed-off-by Soeren Moch <[email protected]>
---
Cc: Stefano Babic <[email protected]>
--- include/configs/tbs2910.h | 4 ++++ 1 file changed, 4 insertions(+)
include/configs/tbs2910.h +4 -0
@@ -51,6 +51,10 @@#define CONFIG_CONSOLE_MUX #define CONFIG_CONS_INDEX 1 +#define CONFIG_PRE_CONSOLE_BUFFER +#define CONFIG_PRE_CON_BUF_SZ 4096 +#define CONFIG_PRE_CON_BUF_ADDR 0x7C000000 +/* *** Command definition *** */ #define CONFIG_CMD_BMODE #define CONFIG_CMD_SETEXPR
Signature · 1 line
1.9.1
PATCH 2/2 tbs2910: add PRE_CONSOLE_BUFFER support
Quoted 15 lines · Soeren Moch
Add
PRE_CONSOLE_BUFFERsupport to display early boot messages over HDMI.Signed-off-by Soeren Moch <[email protected]>---
Cc: Stefano Babic <[email protected]>--- include/configs/tbs2910.h | 4 ++++ 1 file changed, 4 insertions(+)include/configs/tbs2910.h +0
-0
include/configs/tbs2910.h line 60
Quoted 10 lines
include/configs/tbs2910.h +4
-0@@ -51,6 +51,10 @@#define CONFIG_CONSOLE_MUX #define CONFIG_CONS_INDEX 1 +#define CONFIG_PRE_CONSOLE_BUFFER +#define CONFIG_PRE_CON_BUF_SZ 4096 +#define CONFIG_PRE_CON_BUF_ADDR 0x7C000000 +/* *** Command definition *** */ #define CONFIG_CMD_BMODE #define CONFIG_CMD_SETEXPR
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 1/2 tbs2910: add thermal support
In reply to Soeren MochQuoted 24 lines · Soeren Moch
Signed-off-by Soeren Moch <[email protected]>---
Cc: Stefano Babic <[email protected]>--- configs/tbs2910_defconfig | 2 ++ include/configs/tbs2910.h | 2 ++ 2 files changed, 4 insertions(+)configs/tbs2910_defconfig +2
-0@@ -1,3 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_TBS2910=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q" +CONFIG_DM=y +CONFIG_DM_THERMAL=yinclude/configs/tbs2910.h +0
-0
include/configs/tbs2910.h line 28
Quoted 8 lines
include/configs/tbs2910.h +2
-0@@ -21,6 +21,8 @@#define CONFIG_SYS_PROMPT "Matrix U-Boot> "#define CONFIG_SYS_HZ 1000 +#define CONFIG_IMX6_THERMAL +/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================