gpio: vybrid: Use proper parameter name for gpio offset
PATCH 1/1 gpio: vybrid: Use proper parameter name for gpio offset
It's confusing to use gpio as gpio offset parameter so rename it to offset for better readability.
Signed-off-by Axel Lin <[email protected]>
--- drivers/gpio/vybrid_gpio.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
drivers/gpio/vybrid_gpio.c +12 -12
@@ -21,54 +21,54 @@ struct vybrid_gpios {struct vybrid_gpio_regs *reg; }; -static int vybrid_gpio_direction_input (struct udevice *dev,unsigned gpio) +static int vybrid_gpio_direction_input (struct udevice *dev,unsigned offset) {const struct vybrid_gpios *gpios =dev_get_priv (dev); +unsigned gpio = offset + (gpios->chip *VYBRID_GPIO_COUNT ); - gpio = gpio + (gpios->chip *VYBRID_GPIO_COUNT );imx_iomux_gpio_set_direction (gpio,VF610_GPIO_DIRECTION_IN );return 0 ; } -static int vybrid_gpio_direction_output (struct udevice *dev,unsigned gpio, +static int vybrid_gpio_direction_output (struct udevice *dev,unsigned offset,int value) {const struct vybrid_gpios *gpios =dev_get_priv (dev); +unsigned gpio = offset + (gpios->chip *VYBRID_GPIO_COUNT ); - gpio = gpio + (gpios->chip *VYBRID_GPIO_COUNT );gpio_set_value (gpio, value);imx_iomux_gpio_set_direction (gpio,VF610_GPIO_DIRECTION_OUT );return 0 ; } -static int vybrid_gpio_get_value (struct udevice *dev,unsigned gpio) +static int vybrid_gpio_get_value (struct udevice *dev,unsigned offset) {const struct vybrid_gpios *gpios =dev_get_priv (dev); -return ((readl (&gpios->reg->gpio_pdir) & (1 << gpio))) ?1 :0 ; +return ((readl (&gpios->reg->gpio_pdir) & (1 << offset))) ?1 :0 ; } -static int vybrid_gpio_set_value (struct udevice *dev,unsigned gpio, +static int vybrid_gpio_set_value (struct udevice *dev,unsigned offset,int value) {const struct vybrid_gpios *gpios =dev_get_priv (dev); +if (value) -writel ((1 << gpio), &gpios->reg->gpio_psor); +writel ((1 << offset), &gpios->reg->gpio_psor);else -writel ((1 << gpio), &gpios->reg->gpio_pcor); +writel ((1 << offset), &gpios->reg->gpio_pcor);return 0 ; } -static int vybrid_gpio_get_function (struct udevice *dev,unsigned gpio) +static int vybrid_gpio_get_function (struct udevice *dev,unsigned offset) {const struct vybrid_gpios *gpios =dev_get_priv (dev); +unsigned gpio = offset + (gpios->chip *VYBRID_GPIO_COUNT );u32 g_state =0 ; - gpio = gpio + (gpios->chip *VYBRID_GPIO_COUNT ); -imx_iomux_gpio_get_function (gpio, &g_state);if (((g_state & (0x07 <<PAD_MUX_MODE_SHIFT )) >>PAD_MUX_MODE_SHIFT ) >0 )
Signature · 1 line
2.1.0
PATCH 1/1 gpio: vybrid: Use proper parameter name for gpio offset
Quoted 2 lines · Axel Lin
It's confusing to use gpio as gpio offset parameter so rename it to offset for better readability.
Agreed, but IMHO these offsets any way at the end are the gpio numbers of individual gpio chip instances. e.g: gpio 2 of gpio chip 1 which is gpio 34.
Quoted 68 lines
Signed-off-by Axel Lin <[email protected]>--- drivers/gpio/vybrid_gpio.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)drivers/gpio/vybrid_gpio.c +11
-10@@ -21,54 +21,54 @@ struct vybrid_gpios {struct vybrid_gpio_regs *reg; }; -static int vybrid_gpio_direction_input (struct udevice *dev,unsigned gpio) +static int vybrid_gpio_direction_input (struct udevice *dev,unsigned offset) {const struct vybrid_gpios *gpios =dev_get_priv (dev); +unsigned gpio = offset + (gpios->chip *VYBRID_GPIO_COUNT ); - gpio = gpio + (gpios->chip *VYBRID_GPIO_COUNT );imx_iomux_gpio_set_direction (gpio,VF610_GPIO_DIRECTION_IN );return 0 ; } -static int vybrid_gpio_direction_output (struct udevice *dev,unsigned gpio, +static int vybrid_gpio_direction_output (struct udevice *dev,unsigned offset,int value) {const struct vybrid_gpios *gpios =dev_get_priv (dev); +unsigned gpio = offset + (gpios->chip *VYBRID_GPIO_COUNT ); - gpio = gpio + (gpios->chip *VYBRID_GPIO_COUNT );gpio_set_value (gpio, value);imx_iomux_gpio_set_direction (gpio,VF610_GPIO_DIRECTION_OUT );return 0 ; } -static int vybrid_gpio_get_value (struct udevice *dev,unsigned gpio) +static int vybrid_gpio_get_value (struct udevice *dev,unsigned offset) {const struct vybrid_gpios *gpios =dev_get_priv (dev); -return ((readl (&gpios->reg->gpio_pdir) & (1 << gpio))) ?1 :0 ; +return ((readl (&gpios->reg->gpio_pdir) & (1 << offset))) ?1 :0 ; } -static int vybrid_gpio_set_value (struct udevice *dev,unsigned gpio, +static int vybrid_gpio_set_value (struct udevice *dev,unsigned offset,int value) {const struct vybrid_gpios *gpios =dev_get_priv (dev); +if (value) -writel ((1 << gpio), &gpios->reg->gpio_psor); +writel ((1 << offset), &gpios->reg->gpio_psor);else -writel ((1 << gpio), &gpios->reg->gpio_pcor); +writel ((1 << offset), &gpios->reg->gpio_pcor);return 0 ; } -static int vybrid_gpio_get_function (struct udevice *dev,unsigned gpio) +static int vybrid_gpio_get_function (struct udevice *dev,unsigned offset)
drivers/gpio/vybrid_gpio.c struct vybrid_gpios { · line 74
Quoted 10 lines
drivers/gpio/vybrid_gpio.c +1
-2{const struct vybrid_gpios *gpios =dev_get_priv (dev); +unsigned gpio = offset + (gpios->chip *VYBRID_GPIO_COUNT );u32 g_state =0 ; - gpio = gpio + (gpios->chip *VYBRID_GPIO_COUNT ); -imx_iomux_gpio_get_function (gpio, &g_state);if (((g_state & (0x07 <<PAD_MUX_MODE_SHIFT )) >>PAD_MUX_MODE_SHIFT ) >0 )
Best regards,
Bhuvan
PATCH 1/1 gpio: vybrid: Use proper parameter name for gpio offset
2015-06-09 22:37 GMT+08:00 Bhuvanchandra DV <[email protected]>:
Quoted 7 lines · Axel Lin
Quoted 3 lines
It's confusing to use gpio as gpio offset parameter so rename it to offset for better readability.
Agreed, but IMHO these offsets any way at the end are the gpio numbers of individual gpio chip instances. e.g: gpio 2 of gpio chip 1 which is gpio 34.
struct dm_gpio_ops {
int (*request)(struct udevice *dev, unsigned offset, const char *label);
int (*free)(struct udevice *dev, unsigned offset);
int (*direction_input)(struct udevice *dev, unsigned offset);
int (*direction_output)(struct udevice *dev, unsigned offset,
int value);
int (*get_value)(struct udevice *dev, unsigned offset);
int (*set_value)(struct udevice *dev, unsigned offset, int value);
int (*get_function)(struct udevice *dev, unsigned offset);All the callbacks of struct dm_gpio_ops takes offset rather than gpio number, had better use offset here.
The gpio numbers of individual gpio chip instances actually means offset, don't mix it with the actually gpio number.