Skip to contentSkip to conversation

iio-tools out-of-staging cleanup

PATCH Applied Hartmut Knaack 4 participants 11 messages Jun 10, 2015 – Jun 21, 2015 IIO

lore
Share & tools
lore
#0 lore raw

v2 cover iio-tools out-of-staging cleanup

Now that the iio-tools got moved out of staging, it is about time to improve code quality to common kernel level.

Changes in V2:
iio_event_monitor: change error handling in case of read-problems
to abort the read loop, rather than just trying again.

Hartmut Knaack (3):
tools:iio:iio_event_monitor: check if event is fully read tools:iio: adjust coding style
tools:iio: rename variables

 tools/iio/generic_buffer.c    |  46 +++++++++-------
 tools/iio/iio_event_monitor.c |  19 +++++--
 tools/iio/iio_utils.c         | 121 +++++++++++++++++++++++++-----------------
 tools/iio/iio_utils.h         |  15 +++---
 tools/iio/lsiio.c             |  43 ++++++++-------
 5 files changed, 143 insertions(+), 101 deletions(-)
Signature · 1 line
2.3.6
#1 lore raw

PATCH v2 1/3 tools:iio:iio_event_monitor: check if event is fully read

Check that the read event is of the expected size.

---
 tools/iio/iio_event_monitor.c | 6 ++++++
 1 file changed, 6 insertions(+)
tools/iio/iio_event_monitor.c +6 -0
index 016760e..2559fba 100644
@@ -299,6 +299,12 @@ int main(int argc, char **argv)
 			}
 		}
 
+		if (ret != sizeof(event)) {
+			printf("Reading event failed!\n");
+			ret = -EIO;
+			break;
+		}
+
 		print_event(&event);
 	}
 
Signature · 1 line
2.3.6
#2 lore raw

Re: [PATCH v2 1/3] tools:iio:iio_event_monitor: check if event is fully read

Quoted 12 lines · Hartmut Knaack

Check that the read event is of the expected size.

---
 tools/iio/iio_event_monitor.c | 6 ++++++
 1 file changed, 6 insertions(+)
tools/iio/iio_event_monitor.c +0 -0
index 016760e..2559fba 100644

tools/iio/iio_event_monitor.c int main(int argc, char **argv) · line 307

Quoted 9 lines
tools/iio/iio_event_monitor.c +6 -0
@@ -299,6 +299,12 @@ int main(int argc, char **argv)
                        }
                }
 
+               if (ret != sizeof(event)) {
+                       printf("Reading event failed!\n");
+                       ret = -EIO;
+                       break;
+               }
+

For a test program this should be good enough, not sure if it does make sense to read until we get all data.

Also, we should print the error at stderr.

tools/iio/iio_event_monitor.c int main(int argc, char **argv) · line 309

Quoted 2 lines
tools/iio/iio_event_monitor.c +0 -0
                print_event(&event);
        }

thanks,
Daniel.

#3 lore raw

Re: [PATCH v2 1/3] tools:iio:iio_event_monitor: check if event is fully read

Daniel Baluta schrieb am 10.06.2015 um 22:16:

Quoted 16 lines · Hartmut Knaack
Quoted 15 lines

Check that the read event is of the expected size.

---
 tools/iio/iio_event_monitor.c | 6 ++++++
 1 file changed, 6 insertions(+)
tools/iio/iio_event_monitor.c +0 -0
index 016760e..2559fba 100644
@@ -299,6 +299,12 @@ int main(int argc, char **argv)
                        }
                }
 
Quoted 9 lines

tools/iio/iio_event_monitor.c int main(int argc, char **argv) · line 307

Quoted 6 lines
tools/iio/iio_event_monitor.c +6 -0
+               if (ret != sizeof(event)) {
+                       printf("Reading event failed!\n");
+                       ret = -EIO;
+                       break;
+               }
+

For a test program this should be good enough, not sure if it does make sense to read until we get all data.

Not sure, if I get your intention here. But as Jonathan suggested, something went seriously wrong, if the sizes don't match here. Reading further, until the desired size is reached could result in receiving the missing data, or getting already partial data from the next event. I would leave it as is for now and see if anyone ever gets this error. Then we can still dig deeper.

Quoted 3 lines

Also, we should print the error at stderr.

I basically agree on this one, but since the majority of the error messages in this file are currently just printed to stdout, I would prefer to take it as is (for consistency) and have a follow-up patch to send all error messages to stderr.

Thanks for your input.
Hartmut

Quoted 10 lines

tools/iio/iio_event_monitor.c int main(int argc, char **argv) · line 309

Quoted 2 lines
tools/iio/iio_event_monitor.c +0 -0
                print_event(&event);
        }

thanks,
Daniel.
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#4 lore raw

Re: [PATCH v2 1/3] tools:iio:iio_event_monitor: check if event is fully read

Quoted 27 lines · Hartmut Knaack

Daniel Baluta schrieb am 10.06.2015 um 22:16:

Quoted 16 lines · Hartmut Knaack
Quoted 15 lines

Check that the read event is of the expected size.

---
 tools/iio/iio_event_monitor.c | 6 ++++++
 1 file changed, 6 insertions(+)
tools/iio/iio_event_monitor.c +0 -0
index 016760e..2559fba 100644
@@ -299,6 +299,12 @@ int main(int argc, char **argv)
                        }
                }
 
Quoted 9 lines

tools/iio/iio_event_monitor.c int main(int argc, char **argv) · line 307

Quoted 6 lines
tools/iio/iio_event_monitor.c +6 -0
+               if (ret != sizeof(event)) {
+                       printf("Reading event failed!\n");
+                       ret = -EIO;
+                       break;
+               }
+

For a test program this should be good enough, not sure if it does make sense to read until we get all data.

Quoted 5 lines

Not sure, if I get your intention here. But as Jonathan suggested, something went seriously wrong, if the sizes don't match here. Reading further, until the desired size is reached could result in receiving the missing data, or getting already partial data from the next event. I would leave it as is for now and see if anyone ever gets this error. Then we can still dig deeper.

Ok.

Quoted 9 lines
Quoted 4 lines

Also, we should print the error at stderr.

I basically agree on this one, but since the majority of the error messages in this file are currently just printed to stdout, I would prefer to take it as is (for consistency) and have a follow-up patch to send all error messages to stderr.

I've also noticed this. So I agree with you, a follow up patch would be better.

Cristina can do this, if you haven't already started working on it.

As a part of Outreachy Program [1] we are also investigating these user space tools plus the IIO dummy driver which hopefully at the end it will be moved out of staging.

Daniel.

[1] http://kernelnewbies.org/OutreachyIntro

#5 lore raw

Re: [PATCH v2 1/3] tools:iio:iio_event_monitor: check if event is fully read

Daniel Baluta schrieb am 13.06.2015 um 10:46:

Quoted 41 lines · Hartmut Knaack
Quoted 27 lines

Daniel Baluta schrieb am 10.06.2015 um 22:16:

Quoted 16 lines · Hartmut Knaack
Quoted 15 lines

Check that the read event is of the expected size.

---
 tools/iio/iio_event_monitor.c | 6 ++++++
 1 file changed, 6 insertions(+)
tools/iio/iio_event_monitor.c +0 -0
index 016760e..2559fba 100644
@@ -299,6 +299,12 @@ int main(int argc, char **argv)
                        }
                }
 
Quoted 9 lines

tools/iio/iio_event_monitor.c int main(int argc, char **argv) · line 307

Quoted 6 lines
tools/iio/iio_event_monitor.c +6 -0
+               if (ret != sizeof(event)) {
+                       printf("Reading event failed!\n");
+                       ret = -EIO;
+                       break;
+               }
+

For a test program this should be good enough, not sure if it does make sense to read until we get all data.

Quoted 5 lines

Not sure, if I get your intention here. But as Jonathan suggested, something went seriously wrong, if the sizes don't match here. Reading further, until the desired size is reached could result in receiving the missing data, or getting already partial data from the next event. I would leave it as is for now and see if anyone ever gets this error. Then we can still dig deeper.

Ok.

Quoted 5 lines
Quoted 4 lines

Also, we should print the error at stderr.

Quoted 9 lines
Quoted 4 lines

I basically agree on this one, but since the majority of the error messages in this file are currently just printed to stdout, I would prefer to take it as is (for consistency) and have a follow-up patch to send all error messages to stderr.

I've also noticed this. So I agree with you, a follow up patch would be better.

Cristina can do this, if you haven't already started working on it.

Sounds good to me. I would have waited with such changes until this set got applied, anyway.

Quoted 6 lines

As a part of Outreachy Program [1] we are also investigating these user space tools plus the IIO dummy driver which hopefully at the end it will be moved out of staging.

From my experience so far, I would regard it a good idea to chop up the

workflow to get code out of staging:
- get all the changes you have in mind applied
- announce your intention to move it out in a reasonable time (2 weeks?), so people who mind will feel pressured to have a look at the code and fix issues in staging
- move out smoothly ;-)

Also, making use of gits copy detection is a good idea to avoid huge patches, which basically just copy/move a file without changes. Makes the reviewers life much easier ;-)

Thanks,
Hartmut

Quoted 9 lines

Daniel.

[1] http://kernelnewbies.org/OutreachyIntro
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#6 lore raw

Re: [PATCH v2 1/3] tools:iio:iio_event_monitor: check if event is fully read

Quoted 47 lines · Hartmut Knaack

Daniel Baluta schrieb am 13.06.2015 um 10:46:

Quoted 46 lines · Hartmut Knaack
Quoted 27 lines

Daniel Baluta schrieb am 10.06.2015 um 22:16:

Quoted 16 lines · Hartmut Knaack
Quoted 15 lines

Check that the read event is of the expected size.

---
 tools/iio/iio_event_monitor.c | 6 ++++++
 1 file changed, 6 insertions(+)
tools/iio/iio_event_monitor.c +0 -0
index 016760e..2559fba 100644
@@ -299,6 +299,12 @@ int main(int argc, char **argv)
                        }
                }
 
Quoted 9 lines

tools/iio/iio_event_monitor.c int main(int argc, char **argv) · line 307

Quoted 6 lines
tools/iio/iio_event_monitor.c +6 -0
+               if (ret != sizeof(event)) {
+                       printf("Reading event failed!\n");
+                       ret = -EIO;
+                       break;
+               }
+

For a test program this should be good enough, not sure if it does make sense to read until we get all data.

Quoted 5 lines

Not sure, if I get your intention here. But as Jonathan suggested, something went seriously wrong, if the sizes don't match here. Reading further, until the desired size is reached could result in receiving the missing data, or getting already partial data from the next event. I would leave it as is for now and see if anyone ever gets this error. Then we can still dig deeper.

Ok.

Quoted 9 lines
Quoted 4 lines

Also, we should print the error at stderr.

I basically agree on this one, but since the majority of the error messages in this file are currently just printed to stdout, I would prefer to take it as is (for consistency) and have a follow-up patch to send all error messages to stderr.

Quoted 7 lines
Quoted 4 lines

I've also noticed this. So I agree with you, a follow up patch would be better.

Cristina can do this, if you haven't already started working on it.

Sounds good to me. I would have waited with such changes until this set got applied, anyway.

Ok then, I'll wait until this patchset gets applied and then make the requested changes.

Quoted 13 lines
Quoted 4 lines

As a part of Outreachy Program [1] we are also investigating these user space tools plus the IIO dummy driver which hopefully at the end it will be moved out of staging.

From my experience so far, I would regard it a good idea to chop up the workflow to get code out of staging:
- get all the changes you have in mind applied
- announce your intention to move it out in a reasonable time (2 weeks?), so people who mind will feel pressured to have a look at the code and fix issues in staging
- move out smoothly ;-)

Quoted 3 lines

Also, making use of gits copy detection is a good idea to avoid huge patches, which basically just copy/move a file without changes. Makes the reviewers life much easier ;-)

Thanks for the tip, I'll make sure to use it when appropriate.

Cristina

Quoted 13 lines

Thanks,
Hartmut

Quoted 9 lines

Daniel.

[1] http://kernelnewbies.org/OutreachyIntro
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

maintainer Applied
#7 lore raw

Re: [PATCH v2 1/3] tools:iio:iio_event_monitor: check if event is fully read

In reply to Hartmut Knaack
Quoted 3 lines · Hartmut Knaack

Check that the read event is of the expected size.

Hartmut pointed out I hadn't picked this up.
I got lost in the thread, and missed that no one seemed to actually have an issue with the patch, just related questions!

Applied to the togreg branch of iio.git

Thanks

Jonathan

Quoted 12 lines
---
 tools/iio/iio_event_monitor.c | 6 ++++++
 1 file changed, 6 insertions(+)
tools/iio/iio_event_monitor.c +0 -0
index 016760e..2559fba 100644
@@ -299,6 +299,12 @@ int main(int argc, char **argv)
 			}
 		}

tools/iio/iio_event_monitor.c int main(int argc, char **argv) · line 310

Quoted 10 lines
tools/iio/iio_event_monitor.c +6 -0
 
+		if (ret != sizeof(event)) {
+			printf("Reading event failed!\n");
+			ret = -EIO;
+			break;
+		}
+
 		print_event(&event);
 	}
 

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in

#8 lore raw

PATCH v2 2/3 tools:iio: adjust coding style

In reply to Hartmut Knaack

Fix various coding style issues, including:
* have spaces around operators
* indentation
* consolidate parameters in same line
* required braces
* adjust/drop comments
* multiline comment style
* delete unnecessary empty lines
* add empty lines to visualize logial code blocks
* typos

---
 tools/iio/generic_buffer.c    |  46 +++++++++--------
 tools/iio/iio_event_monitor.c |  13 +++--
 tools/iio/iio_utils.c         | 111 +++++++++++++++++++++++++-----------------
 tools/iio/iio_utils.h         |  15 +++---
 tools/iio/lsiio.c             |  15 +++---
 5 files changed, 118 insertions(+), 82 deletions(-)
tools/iio/generic_buffer.c +27 -19
index 4eebb66..fc362d2 100644
@@ -51,11 +51,13 @@ int size_from_channelarray(struct iio_channel_info *channels, int num_channels)
 		if (bytes % channels[i].bytes == 0)
 			channels[i].location = bytes;
 		else
-			channels[i].location = bytes - bytes%channels[i].bytes
-				+ channels[i].bytes;
+			channels[i].location = bytes - bytes % channels[i].bytes
+					       + channels[i].bytes;
+
 		bytes = channels[i].location + channels[i].bytes;
 		i++;
 	}
+
 	return bytes;
 }
 
@@ -136,9 +138,9 @@ void print8byte(uint64_t input, struct iio_channel_info *info)
 /**
  * process_scan() - print out the values in SI units
  * @data:		pointer to the start of the scan
- * @channels:		information about the channels. Note
- *  size_from_channelarray must have been called first to fill the
- *  location offsets.
+ * @channels:		information about the channels.
+ *			Note: size_from_channelarray must have been called first
+ *			      to fill the location offsets.
  * @num_channels:	number of channels
  **/
 void process_scan(char *data,
@@ -213,6 +215,7 @@ int main(int argc, char **argv)
 			num_loops = strtoul(optarg, &dummy, 10);
 			if (errno)
 				return -errno;
+
 			break;
 		case 'e':
 			noevents = 1;
@@ -225,6 +228,7 @@ int main(int argc, char **argv)
 			buf_len = strtoul(optarg, &dummy, 10);
 			if (errno)
 				return -errno;
+
 			break;
 		case 'n':
 			device_name = optarg;
@@ -257,6 +261,7 @@ int main(int argc, char **argv)
 		printf("Failed to find the %s\n", device_name);
 		return dev_num;
 	}
+
 	printf("iio device number being used is %d\n", dev_num);
 
 	ret = asprintf(&dev_dir_name, "%siio:device%d", iio_dir, dev_num);
@@ -285,9 +290,11 @@ int main(int argc, char **argv)
 			ret = trig_num;
 			goto error_free_triggername;
 		}
+
 		printf("iio trigger number being used is %d\n", trig_num);
-	} else
+	} else {
 		printf("trigger-less mode selected\n");
+	}
 
 	/*
 	 * Parse the files in scan_elements to identify what channels are
@@ -314,8 +321,10 @@ int main(int argc, char **argv)
 
 	if (!notrigger) {
 		printf("%s %s\n", dev_dir_name, trigger_name);
-		/* Set the device trigger to be the data ready trigger found
-		 * above */
+		/*
+		 * Set the device trigger to be the data ready trigger found
+		 * above
+		 */
 		ret = write_sysfs_string_and_verify("trigger/current_trigger",
 						    dev_dir_name,
 						    trigger_name);
@@ -334,8 +343,9 @@ int main(int argc, char **argv)
 	ret = write_sysfs_int("enable", buf_dir_name, 1);
 	if (ret < 0)
 		goto error_free_buf_dir_name;
+
 	scan_size = size_from_channelarray(channels, num_channels);
-	data = malloc(scan_size*buf_len);
+	data = malloc(scan_size * buf_len);
 	if (!data) {
 		ret = -ENOMEM;
 		goto error_free_buf_dir_name;
@@ -349,13 +359,12 @@ int main(int argc, char **argv)
 
 	/* Attempt to open non blocking the access dev */
 	fp = open(buffer_access, O_RDONLY | O_NONBLOCK);
-	if (fp == -1) { /* If it isn't there make the node */
+	if (fp == -1) { /* TODO: If it isn't there make the node */
 		ret = -errno;
 		printf("Failed to open %s\n", buffer_access);
 		goto error_free_buffer_access;
 	}
 
-	/* Wait for events 10 times */
 	for (j = 0; j < num_loops; j++) {
 		if (!noevents) {
 			struct pollfd pfd = {
@@ -372,25 +381,22 @@ int main(int argc, char **argv)
 			}
 
 			toread = buf_len;
-
 		} else {
 			usleep(timedelay);
 			toread = 64;
 		}
 
-		read_size = read(fp,
-				 data,
-				 toread*scan_size);
+		read_size = read(fp, data, toread * scan_size);
 		if (read_size < 0) {
 			if (errno == EAGAIN) {
 				printf("nothing available\n");
 				continue;
-			} else
+			} else {
 				break;
+			}
 		}
-		for (i = 0; i < read_size/scan_size; i++)
-			process_scan(data + scan_size*i,
-				     channels,
+		for (i = 0; i < read_size / scan_size; i++)
+			process_scan(data + scan_size * i, channels,
 				     num_channels);
 	}
 
@@ -409,6 +415,7 @@ int main(int argc, char **argv)
 error_close_buffer_access:
 	if (close(fp) == -1)
 		perror("Failed to close buffer");
+
 error_free_buffer_access:
 	free(buffer_access);
 error_free_data:
@@ -424,6 +431,7 @@ error_free_channels:
 error_free_triggername:
 	if (datardytrigger)
 		free(trigger_name);
+
 error_free_dev_dir_name:
 	free(dev_dir_name);
 
tools/iio/iio_event_monitor.c +8 -5
index 2559fba..e16d95f 100644
@@ -13,7 +13,6 @@
  *
  * Usage:
  *	iio_event_monitor <device_name>
- *
  */
 
 #include <unistd.h>
@@ -209,7 +208,8 @@ static void print_event(struct iio_event_data *event)
 
 	if (!event_is_known(event)) {
 		printf("Unknown event: time: %lld, id: %llx\n",
-				event->timestamp, event->id);
+		       event->timestamp, event->id);
+
 		return;
 	}
 
@@ -229,6 +229,7 @@ static void print_event(struct iio_event_data *event)
 
 	if (dir != IIO_EV_DIR_NONE)
 		printf(", direction: %s", iio_ev_dir_text[dir]);
+
 	printf("\n");
 }
 
@@ -251,14 +252,16 @@ int main(int argc, char **argv)
 	dev_num = find_type_by_name(device_name, "iio:device");
 	if (dev_num >= 0) {
 		printf("Found IIO device with name %s with device number %d\n",
-			device_name, dev_num);
+		       device_name, dev_num);
 		ret = asprintf(&chrdev_name, "/dev/iio:device%d", dev_num);
 		if (ret < 0) {
 			return -ENOMEM;
 		}
 	} else {
-		/* If we can't find a IIO device by name assume device_name is a
-		   IIO chrdev */
+		/*
+		 * If we can't find an IIO device by name assume device_name is
+		 * an IIO chrdev
+		 */
 		chrdev_name = strdup(device_name);
 		if (!chrdev_name)
 			return -ENOMEM;
tools/iio/iio_utils.c +67 -44

438 lines not on this page · raw message

tools/iio/iio_utils.h +7 -8
index 379eed9..0866101 100644
@@ -51,17 +51,16 @@ struct iio_channel_info {
 };
 
 int iioutils_break_up_name(const char *full_name, char **generic_name);
-int iioutils_get_type(unsigned *is_signed, unsigned *bytes,
-					  unsigned *bits_used, unsigned *shift,
-					  uint64_t *mask, unsigned *be,
-					  const char *device_dir, const char *name,
-					  const char *generic_name);
+int iioutils_get_type(unsigned *is_signed, unsigned *bytes, unsigned *bits_used,
+		      unsigned *shift, uint64_t *mask, unsigned *be,
+		      const char *device_dir, const char *name,
+		      const char *generic_name);
 int iioutils_get_param_float(float *output, const char *param_name,
-							 const char *device_dir, const char *name,
-							 const char *generic_name);
+			     const char *device_dir, const char *name,
+			     const char *generic_name);
 void bsort_channel_array_by_index(struct iio_channel_info **ci_array, int cnt);
 int build_channel_array(const char *device_dir,
-						struct iio_channel_info **ci_array, int *counter);
+			struct iio_channel_info **ci_array, int *counter);
 int find_type_by_name(const char *name, const char *type);
 int write_sysfs_int(const char *filename, const char *basedir, int val);
 int write_sysfs_int_and_verify(const char *filename, const char *basedir,
tools/iio/lsiio.c +9 -6
index b59ee17..f5b3bd0 100644
@@ -20,7 +20,6 @@
 #include <sys/dir.h>
 #include "iio_utils.h"
 
-
 static enum verbosity {
 	VERBLEVEL_DEFAULT,	/* 0 gives lspci behaviour */
 	VERBLEVEL_SENSORS,	/* 1 lists sensors */
@@ -29,17 +28,16 @@ static enum verbosity {
 const char *type_device = "iio:device";
 const char *type_trigger = "trigger";
 
-
 static inline int check_prefix(const char *str, const char *prefix)
 {
 	return strlen(str) > strlen(prefix) &&
-		strncmp(str, prefix, strlen(prefix)) == 0;
+	       strncmp(str, prefix, strlen(prefix)) == 0;
 }
 
 static inline int check_postfix(const char *str, const char *postfix)
 {
 	return strlen(str) > strlen(postfix) &&
-		strcmp(str + strlen(str) - strlen(postfix), postfix) == 0;
+	       strcmp(str + strlen(str) - strlen(postfix), postfix) == 0;
 }
 
 static int dump_channels(const char *dev_dir_name)
@@ -50,11 +48,11 @@ static int dump_channels(const char *dev_dir_name)
 	dp = opendir(dev_dir_name);
 	if (dp == NULL)
 		return -errno;
+
 	while (ent = readdir(dp), ent != NULL)
 		if (check_prefix(ent->d_name, "in_") &&
-		    check_postfix(ent->d_name, "_raw")) {
+		    check_postfix(ent->d_name, "_raw"))
 			printf("   %-10s\n", ent->d_name);
-		}
 
 	return (closedir(dp) == -1) ? -errno : 0;
 }
@@ -69,6 +67,7 @@ static int dump_one_device(const char *dev_dir_name)
 			"%i", &dev_idx);
 	if (retval != 1)
 		return -EINVAL;
+
 	retval = read_sysfs_string("name", dev_dir_name, name);
 	if (retval)
 		return retval;
@@ -77,6 +76,7 @@ static int dump_one_device(const char *dev_dir_name)
 
 	if (verblevel >= VERBLEVEL_SENSORS)
 		return dump_channels(dev_dir_name);
+
 	return 0;
 }
 
@@ -90,11 +90,13 @@ static int dump_one_trigger(const char *dev_dir_name)
 			"%i", &dev_idx);
 	if (retval != 1)
 		return -EINVAL;
+
 	retval = read_sysfs_string("name", dev_dir_name, name);
 	if (retval)
 		return retval;
 
 	printf("Trigger %03d: %s\n", dev_idx, name);
+
 	return 0;
 }
 
@@ -151,6 +153,7 @@ static int dump_devices(void)
 			free(dev_dir_name);
 		}
 	}
+
 	return (closedir(dp) == -1) ? -errno : 0;
 
 error_close_dir:
Signature · 1 line
2.3.6
maintainer Applied
#9 lore raw

Re: [PATCH v2 2/3] tools:iio: adjust coding style

Quoted 4 lines · Hartmut Knaack

Fix various coding style issues, including:
* have spaces around operators
* indentation
* consolidate parameters in same line

Not sure I'd have bothered with the consolidation but does no harm and the rest is well worth while.

Quoted 8 lines

* required braces
* adjust/drop comments
* multiline comment style
* delete unnecessary empty lines
* add empty lines to visualize logial code blocks
* typos

Applied to the togreg branch of iio.git. Chances are it will be for the next cycle now though.

Thanks,

Jonathan

Quoted 817 lines
---
 tools/iio/generic_buffer.c    |  46 +++++++++--------
 tools/iio/iio_event_monitor.c |  13 +++--
 tools/iio/iio_utils.c         | 111 +++++++++++++++++++++++++-----------------
 tools/iio/iio_utils.h         |  15 +++---
 tools/iio/lsiio.c             |  15 +++---
 5 files changed, 118 insertions(+), 82 deletions(-)
tools/iio/generic_buffer.c +27 -19
index 4eebb66..fc362d2 100644
@@ -51,11 +51,13 @@ int size_from_channelarray(struct iio_channel_info *channels, int num_channels)
 		if (bytes % channels[i].bytes == 0)
 			channels[i].location = bytes;
 		else
-			channels[i].location = bytes - bytes%channels[i].bytes
-				+ channels[i].bytes;
+			channels[i].location = bytes - bytes % channels[i].bytes
+					       + channels[i].bytes;
+
 		bytes = channels[i].location + channels[i].bytes;
 		i++;
 	}
+
 	return bytes;
 }
 
@@ -136,9 +138,9 @@ void print8byte(uint64_t input, struct iio_channel_info *info)
 /**
  * process_scan() - print out the values in SI units
  * @data:		pointer to the start of the scan
- * @channels:		information about the channels. Note
- *  size_from_channelarray must have been called first to fill the
- *  location offsets.
+ * @channels:		information about the channels.
+ *			Note: size_from_channelarray must have been called first
+ *			      to fill the location offsets.
  * @num_channels:	number of channels
  **/
 void process_scan(char *data,
@@ -213,6 +215,7 @@ int main(int argc, char **argv)
 			num_loops = strtoul(optarg, &dummy, 10);
 			if (errno)
 				return -errno;
+
 			break;
 		case 'e':
 			noevents = 1;
@@ -225,6 +228,7 @@ int main(int argc, char **argv)
 			buf_len = strtoul(optarg, &dummy, 10);
 			if (errno)
 				return -errno;
+
 			break;
 		case 'n':
 			device_name = optarg;
@@ -257,6 +261,7 @@ int main(int argc, char **argv)
 		printf("Failed to find the %s\n", device_name);
 		return dev_num;
 	}
+
 	printf("iio device number being used is %d\n", dev_num);
 
 	ret = asprintf(&dev_dir_name, "%siio:device%d", iio_dir, dev_num);
@@ -285,9 +290,11 @@ int main(int argc, char **argv)
 			ret = trig_num;
 			goto error_free_triggername;
 		}
+
 		printf("iio trigger number being used is %d\n", trig_num);
-	} else
+	} else {
 		printf("trigger-less mode selected\n");
+	}
 
 	/*
 	 * Parse the files in scan_elements to identify what channels are
@@ -314,8 +321,10 @@ int main(int argc, char **argv)
 
 	if (!notrigger) {
 		printf("%s %s\n", dev_dir_name, trigger_name);
-		/* Set the device trigger to be the data ready trigger found
-		 * above */
+		/*
+		 * Set the device trigger to be the data ready trigger found
+		 * above
+		 */
 		ret = write_sysfs_string_and_verify("trigger/current_trigger",
 						    dev_dir_name,
 						    trigger_name);
@@ -334,8 +343,9 @@ int main(int argc, char **argv)
 	ret = write_sysfs_int("enable", buf_dir_name, 1);
 	if (ret < 0)
 		goto error_free_buf_dir_name;
+
 	scan_size = size_from_channelarray(channels, num_channels);
-	data = malloc(scan_size*buf_len);
+	data = malloc(scan_size * buf_len);
 	if (!data) {
 		ret = -ENOMEM;
 		goto error_free_buf_dir_name;
@@ -349,13 +359,12 @@ int main(int argc, char **argv)
 
 	/* Attempt to open non blocking the access dev */
 	fp = open(buffer_access, O_RDONLY | O_NONBLOCK);
-	if (fp == -1) { /* If it isn't there make the node */
+	if (fp == -1) { /* TODO: If it isn't there make the node */
 		ret = -errno;
 		printf("Failed to open %s\n", buffer_access);
 		goto error_free_buffer_access;
 	}
 
-	/* Wait for events 10 times */
 	for (j = 0; j < num_loops; j++) {
 		if (!noevents) {
 			struct pollfd pfd = {
@@ -372,25 +381,22 @@ int main(int argc, char **argv)
 			}
 
 			toread = buf_len;
-
 		} else {
 			usleep(timedelay);
 			toread = 64;
 		}
 
-		read_size = read(fp,
-				 data,
-				 toread*scan_size);
+		read_size = read(fp, data, toread * scan_size);
 		if (read_size < 0) {
 			if (errno == EAGAIN) {
 				printf("nothing available\n");
 				continue;
-			} else
+			} else {
 				break;
+			}
 		}
-		for (i = 0; i < read_size/scan_size; i++)
-			process_scan(data + scan_size*i,
-				     channels,
+		for (i = 0; i < read_size / scan_size; i++)
+			process_scan(data + scan_size * i, channels,
 				     num_channels);
 	}
 
@@ -409,6 +415,7 @@ int main(int argc, char **argv)
 error_close_buffer_access:
 	if (close(fp) == -1)
 		perror("Failed to close buffer");
+
 error_free_buffer_access:
 	free(buffer_access);
 error_free_data:
@@ -424,6 +431,7 @@ error_free_channels:
 error_free_triggername:
 	if (datardytrigger)
 		free(trigger_name);
+
 error_free_dev_dir_name:
 	free(dev_dir_name);
 
tools/iio/iio_event_monitor.c +8 -5
index 2559fba..e16d95f 100644
@@ -13,7 +13,6 @@
  *
  * Usage:
  *	iio_event_monitor <device_name>
- *
  */
 
 #include <unistd.h>
@@ -209,7 +208,8 @@ static void print_event(struct iio_event_data *event)
 
 	if (!event_is_known(event)) {
 		printf("Unknown event: time: %lld, id: %llx\n",
-				event->timestamp, event->id);
+		       event->timestamp, event->id);
+
 		return;
 	}
 
@@ -229,6 +229,7 @@ static void print_event(struct iio_event_data *event)
 
 	if (dir != IIO_EV_DIR_NONE)
 		printf(", direction: %s", iio_ev_dir_text[dir]);
+
 	printf("\n");
 }
 
@@ -251,14 +252,16 @@ int main(int argc, char **argv)
 	dev_num = find_type_by_name(device_name, "iio:device");
 	if (dev_num >= 0) {
 		printf("Found IIO device with name %s with device number %d\n",
-			device_name, dev_num);
+		       device_name, dev_num);
 		ret = asprintf(&chrdev_name, "/dev/iio:device%d", dev_num);
 		if (ret < 0) {
 			return -ENOMEM;
 		}
 	} else {
-		/* If we can't find a IIO device by name assume device_name is a
-		   IIO chrdev */
+		/*
+		 * If we can't find an IIO device by name assume device_name is
+		 * an IIO chrdev
+		 */
 		chrdev_name = strdup(device_name);
 		if (!chrdev_name)
 			return -ENOMEM;
tools/iio/iio_utils.c +67 -44
index ec9ab7f..4eac11a 100644
@@ -32,8 +32,7 @@ static char * const iio_direction[] = {
  *
  * Returns 0 on success, or a negative error code if string extraction failed.
  **/
-int iioutils_break_up_name(const char *full_name,
-				  char **generic_name)
+int iioutils_break_up_name(const char *full_name, char **generic_name)
 {
 	char *current;
 	char *w, *r;
@@ -65,6 +64,7 @@ int iioutils_break_up_name(const char *full_name,
 			*w = *r;
 			w++;
 		}
+
 		r++;
 	}
 	*w = '\0';
@@ -88,15 +88,10 @@ int iioutils_break_up_name(const char *full_name,
  *
  * Returns a value >= 0 on success, otherwise a negative error code.
  **/
-int iioutils_get_type(unsigned *is_signed,
-			     unsigned *bytes,
-			     unsigned *bits_used,
-			     unsigned *shift,
-			     uint64_t *mask,
-			     unsigned *be,
-			     const char *device_dir,
-			     const char *name,
-			     const char *generic_name)
+int iioutils_get_type(unsigned *is_signed, unsigned *bytes, unsigned *bits_used,
+		      unsigned *shift, uint64_t *mask, unsigned *be,
+		      const char *device_dir, const char *name,
+		      const char *generic_name)
 {
 	FILE *sysfsfp;
 	int ret;
@@ -126,6 +121,7 @@ int iioutils_get_type(unsigned *is_signed,
 		ret = -errno;
 		goto error_free_builtname_generic;
 	}
+
 	ret = -ENOENT;
 	while (ent = readdir(dp), ent != NULL)
 		/*
@@ -140,6 +136,7 @@ int iioutils_get_type(unsigned *is_signed,
 				ret = -ENOMEM;
 				goto error_closedir;
 			}
+
 			sysfsfp = fopen(filename, "r");
 			if (sysfsfp == NULL) {
 				ret = -errno;
@@ -162,12 +159,14 @@ int iioutils_get_type(unsigned *is_signed,
 				printf("scan type description didn't match\n");
 				goto error_close_sysfsfp;
 			}
+
 			*be = (endianchar == 'b');
 			*bytes = padint / 8;
 			if (*bits_used == 64)
 				*mask = ~0;
 			else
 				*mask = (1 << *bits_used) - 1;
+
 			*is_signed = (signchar == 's');
 			if (fclose(sysfsfp)) {
 				ret = -errno;
@@ -177,9 +176,9 @@ int iioutils_get_type(unsigned *is_signed,
 
 			sysfsfp = 0;
 			free(filename);
-
 			filename = 0;
 		}
+
 error_close_sysfsfp:
 	if (sysfsfp)
 		if (fclose(sysfsfp))
@@ -188,6 +187,7 @@ error_close_sysfsfp:
 error_free_filename:
 	if (filename)
 		free(filename);
+
 error_closedir:
 	if (closedir(dp) == -1)
 		perror("iioutils_get_type(): Failed to close directory");
@@ -212,11 +212,9 @@ error_free_scan_el_dir:
  *
  * Returns a value >= 0 on success, otherwise a negative error code.
  **/
-int iioutils_get_param_float(float *output,
-				    const char *param_name,
-				    const char *device_dir,
-				    const char *name,
-				    const char *generic_name)
+int iioutils_get_param_float(float *output, const char *param_name,
+			     const char *device_dir, const char *name,
+			     const char *generic_name)
 {
 	FILE *sysfsfp;
 	int ret;
@@ -235,11 +233,13 @@ int iioutils_get_param_float(float *output,
 		ret = -ENOMEM;
 		goto error_free_builtname;
 	}
+
 	dp = opendir(device_dir);
 	if (dp == NULL) {
 		ret = -errno;
 		goto error_free_builtname_generic;
 	}
+
 	ret = -ENOENT;
 	while (ent = readdir(dp), ent != NULL)
 		if ((strcmp(builtname, ent->d_name) == 0) ||
@@ -250,11 +250,13 @@ int iioutils_get_param_float(float *output,
 				ret = -ENOMEM;
 				goto error_closedir;
 			}
+
 			sysfsfp = fopen(filename, "r");
 			if (!sysfsfp) {
 				ret = -errno;
 				goto error_free_filename;
 			}
+
 			errno = 0;
 			if (fscanf(sysfsfp, "%f", output) != 1)
 				ret = errno ? -errno : -ENODATA;
@@ -264,6 +266,7 @@ int iioutils_get_param_float(float *output,
 error_free_filename:
 	if (filename)
 		free(filename);
+
 error_closedir:
 	if (closedir(dp) == -1)
 		perror("iioutils_get_param_float(): Failed to close directory");
@@ -282,16 +285,14 @@ error_free_builtname:
  * @cnt: the amount of array elements
  **/
 
-void bsort_channel_array_by_index(struct iio_channel_info **ci_array,
-					 int cnt)
+void bsort_channel_array_by_index(struct iio_channel_info **ci_array, int cnt)
 {
-
 	struct iio_channel_info temp;
 	int x, y;
 
 	for (x = 0; x < cnt; x++)
 		for (y = 0; y < (cnt - 1); y++)
-			if ((*ci_array)[y].index > (*ci_array)[y+1].index) {
+			if ((*ci_array)[y].index > (*ci_array)[y + 1].index) {
 				temp = (*ci_array)[y + 1];
 				(*ci_array)[y + 1] = (*ci_array)[y];
 				(*ci_array)[y] = temp;
@@ -307,8 +308,7 @@ void bsort_channel_array_by_index(struct iio_channel_info **ci_array,
  * Returns 0 on success, otherwise a negative error code.
  **/
 int build_channel_array(const char *device_dir,
-			      struct iio_channel_info **ci_array,
-			      int *counter)
+			struct iio_channel_info **ci_array, int *counter)
 {
 	DIR *dp;
 	FILE *sysfsfp;
@@ -329,6 +329,7 @@ int build_channel_array(const char *device_dir,
 		ret = -errno;
 		goto error_free_name;
 	}
+
 	while (ent = readdir(dp), ent != NULL)
 		if (strcmp(ent->d_name + strlen(ent->d_name) - strlen("_en"),
 			   "_en") == 0) {
@@ -338,12 +339,14 @@ int build_channel_array(const char *device_dir,
 				ret = -ENOMEM;
 				goto error_close_dir;
 			}
+
 			sysfsfp = fopen(filename, "r");
 			if (sysfsfp == NULL) {
 				ret = -errno;
 				free(filename);
 				goto error_close_dir;
 			}
+
 			errno = 0;
 			if (fscanf(sysfsfp, "%i", &ret) != 1) {
 				ret = errno ? -errno : -ENODATA;
@@ -353,9 +356,9 @@ int build_channel_array(const char *device_dir,
 				free(filename);
 				goto error_close_dir;
 			}
-
 			if (ret == 1)
 				(*counter)++;
+
 			if (fclose(sysfsfp)) {
 				ret = -errno;
 				free(filename);
@@ -364,11 +367,13 @@ int build_channel_array(const char *device_dir,
 
 			free(filename);
 		}
+
 	*ci_array = malloc(sizeof(**ci_array) * (*counter));
 	if (*ci_array == NULL) {
 		ret = -ENOMEM;
 		goto error_close_dir;
 	}
+
 	seekdir(dp, 0);
 	while (ent = readdir(dp), ent != NULL) {
 		if (strcmp(ent->d_name + strlen(ent->d_name) - strlen("_en"),
@@ -384,6 +389,7 @@ int build_channel_array(const char *device_dir,
 				count--;
 				goto error_cleanup_array;
 			}
+
 			sysfsfp = fopen(filename, "r");
 			if (sysfsfp == NULL) {
 				ret = -errno;
@@ -391,6 +397,7 @@ int build_channel_array(const char *device_dir,
 				count--;
 				goto error_cleanup_array;
 			}
+
 			errno = 0;
 			if (fscanf(sysfsfp, "%i", &current_enabled) != 1) {
 				ret = errno ? -errno : -ENODATA;
@@ -423,6 +430,7 @@ int build_channel_array(const char *device_dir,
 				count--;
 				goto error_cleanup_array;
 			}
+
 			/* Get the generic and specific name elements */
 			ret = iioutils_break_up_name(current->name,
 						     &current->generic_name);
@@ -432,6 +440,7 @@ int build_channel_array(const char *device_dir,
 				count--;
 				goto error_cleanup_array;
 			}
+
 			ret = asprintf(&filename,
 				       "%s/%s_index",
 				       scan_el_dir,
@@ -441,6 +450,7 @@ int build_channel_array(const char *device_dir,
 				ret = -ENOMEM;
 				goto error_cleanup_array;
 			}
+
 			sysfsfp = fopen(filename, "r");
 			if (sysfsfp == NULL) {
 				ret = -errno;
@@ -474,6 +484,7 @@ int build_channel_array(const char *device_dir,
 						       current->generic_name);
 			if (ret < 0)
 				goto error_cleanup_array;
+
 			ret = iioutils_get_param_float(&current->offset,
 						       "offset",
 						       device_dir,
@@ -481,6 +492,7 @@ int build_channel_array(const char *device_dir,
 						       current->generic_name);
 			if (ret < 0)
 				goto error_cleanup_array;
+
 			ret = iioutils_get_type(&current->is_signed,
 						&current->bytes,
 						&current->bits_used,
@@ -562,9 +574,9 @@ int find_type_by_name(const char *name, const char *type)
 
 	while (ent = readdir(dp), ent != NULL) {
 		if (strcmp(ent->d_name, ".") != 0 &&
-			strcmp(ent->d_name, "..") != 0 &&
-			strlen(ent->d_name) > strlen(type) &&
-			strncmp(ent->d_name, type, strlen(type)) == 0) {
+		    strcmp(ent->d_name, "..") != 0 &&
+		    strlen(ent->d_name) > strlen(type) &&
+		    strncmp(ent->d_name, type, strlen(type)) == 0) {
 			errno = 0;
 			ret = sscanf(ent->d_name + strlen(type), "%d", &number);
 			if (ret < 0) {
@@ -580,12 +592,9 @@ int find_type_by_name(const char *name, const char *type)
 			numstrlen = calc_digits(number);
 			/* verify the next character is not a colon */
 			if (strncmp(ent->d_name + strlen(type) + numstrlen,
-					":",
-					1) != 0) {
-				filename = malloc(strlen(iio_dir)
-						+ strlen(type)
-						+ numstrlen
-						+ 6);
+			    ":", 1) != 0) {
+				filename = malloc(strlen(iio_dir) + strlen(type)
+						  + numstrlen + 6);
 				if (filename == NULL) {
 					ret = -ENOMEM;
 					goto error_close_dir;
@@ -603,6 +612,7 @@ int find_type_by_name(const char *name, const char *type)
 					free(filename);
 					continue;
 				}
+
 				free(filename);
 				errno = 0;
 				if (fscanf(nameFile, "%s", thisname) != 1) {
@@ -618,6 +628,7 @@ int find_type_by_name(const char *name, const char *type)
 				if (strcmp(name, thisname) == 0) {
 					if (closedir(dp) == -1)
 						return -errno;
+
 					return number;
 				}
 			}
@@ -631,6 +642,7 @@ int find_type_by_name(const char *name, const char *type)
 error_close_dir:
 	if (closedir(dp) == -1)
 		perror("find_type_by_name(): Failed to close directory");
+
 	return ret;
 }
 
@@ -644,6 +656,7 @@ static int _write_sysfs_int(const char *filename, const char *basedir, int val,
 
 	if (temp == NULL)
 		return -ENOMEM;
+
 	ret = sprintf(temp, "%s/%s", basedir, filename);
 	if (ret < 0)
 		goto error_free;
@@ -654,6 +667,7 @@ static int _write_sysfs_int(const char *filename, const char *basedir, int val,
 		printf("failed to open %s\n", temp);
 		goto error_free;
 	}
+
 	ret = fprintf(sysfsfp, "%d", val);
 	if (ret < 0) {
 		if (fclose(sysfsfp))
@@ -674,6 +688,7 @@ static int _write_sysfs_int(const char *filename, const char *basedir, int val,
 			printf("failed to open %s\n", temp);
 			goto error_free;
 		}
+
 		if (fscanf(sysfsfp, "%d", &test) != 1) {
 			ret = errno ? -errno : -ENODATA;
 			if (fclose(sysfsfp))
@@ -688,13 +703,12 @@ static int _write_sysfs_int(const char *filename, const char *basedir, int val,
 		}
 
 		if (test != val) {
-			printf("Possible failure in int write %d to %s%s\n",
-				val,
-				basedir,
-				filename);
+			printf("Possible failure in int write %d to %s/%s\n",
+			       val, basedir, filename);
 			ret = -1;
 		}
 	}
+
 error_free:
 	free(temp);
 	return ret;
@@ -739,6 +753,7 @@ static int _write_sysfs_string(const char *filename, const char *basedir,
 		printf("Memory allocation failed\n");
 		return -ENOMEM;
 	}
+
 	ret = sprintf(temp, "%s/%s", basedir, filename);
 	if (ret < 0)
 		goto error_free;
@@ -749,6 +764,7 @@ static int _write_sysfs_string(const char *filename, const char *basedir,
 		printf("Could not open %s\n", temp);
 		goto error_free;
 	}
+
 	ret = fprintf(sysfsfp, "%s", val);
 	if (ret < 0) {
 		if (fclose(sysfsfp))
@@ -766,9 +782,10 @@ static int _write_sysfs_string(const char *filename, const char *basedir,
 		sysfsfp = fopen(temp, "r");
 		if (sysfsfp == NULL) {
 			ret = -errno;
-			printf("could not open file to verify\n");
+			printf("Could not open file to verify\n");
 			goto error_free;
 		}
+
 		if (fscanf(sysfsfp, "%s", temp) != 1) {
 			ret = errno ? -errno : -ENODATA;
 			if (fclose(sysfsfp))
@@ -784,15 +801,12 @@ static int _write_sysfs_string(const char *filename, const char *basedir,
 
 		if (strcmp(temp, val) != 0) {
 			printf("Possible failure in string write of %s "
-				"Should be %s "
-				"written to %s\%s\n",
-				temp,
-				val,
-				basedir,
-				filename);
+			       "Should be %s written to %s/%s\n", temp, val,
+			       basedir, filename);
 			ret = -1;
 		}
 	}
+
 error_free:
 	free(temp);
 
@@ -845,6 +859,7 @@ int read_sysfs_posint(const char *filename, const char *basedir)
 		printf("Memory allocation failed");
 		return -ENOMEM;
 	}
+
 	ret = sprintf(temp, "%s/%s", basedir, filename);
 	if (ret < 0)
 		goto error_free;
@@ -854,6 +869,7 @@ int read_sysfs_posint(const char *filename, const char *basedir)
 		ret = -errno;
 		goto error_free;
 	}
+
 	errno = 0;
 	if (fscanf(sysfsfp, "%d\n", &ret) != 1) {
 		ret = errno ? -errno : -ENODATA;
@@ -868,6 +884,7 @@ int read_sysfs_posint(const char *filename, const char *basedir)
 
 error_free:
 	free(temp);
+
 	return ret;
 }
 
@@ -889,6 +906,7 @@ int read_sysfs_float(const char *filename, const char *basedir, float *val)
 		printf("Memory allocation failed");
 		return -ENOMEM;
 	}
+
 	ret = sprintf(temp, "%s/%s", basedir, filename);
 	if (ret < 0)
 		goto error_free;
@@ -898,6 +916,7 @@ int read_sysfs_float(const char *filename, const char *basedir, float *val)
 		ret = -errno;
 		goto error_free;
 	}
+
 	errno = 0;
 	if (fscanf(sysfsfp, "%f\n", val) != 1) {
 		ret = errno ? -errno : -ENODATA;
@@ -912,6 +931,7 @@ int read_sysfs_float(const char *filename, const char *basedir, float *val)
 
 error_free:
 	free(temp);
+
 	return ret;
 }
 
@@ -933,6 +953,7 @@ int read_sysfs_string(const char *filename, const char *basedir, char *str)
 		printf("Memory allocation failed");
 		return -ENOMEM;
 	}
+
 	ret = sprintf(temp, "%s/%s", basedir, filename);
 	if (ret < 0)
 		goto error_free;
@@ -942,6 +963,7 @@ int read_sysfs_string(const char *filename, const char *basedir, char *str)
 		ret = -errno;
 		goto error_free;
 	}
+
 	errno = 0;
 	if (fscanf(sysfsfp, "%s\n", str) != 1) {
 		ret = errno ? -errno : -ENODATA;
@@ -956,6 +978,7 @@ int read_sysfs_string(const char *filename, const char *basedir, char *str)
 
 error_free:
 	free(temp);
+
 	return ret;
 }
 
tools/iio/iio_utils.h +7 -8
index 379eed9..0866101 100644
@@ -51,17 +51,16 @@ struct iio_channel_info {
 };
 
 int iioutils_break_up_name(const char *full_name, char **generic_name);
-int iioutils_get_type(unsigned *is_signed, unsigned *bytes,
-					  unsigned *bits_used, unsigned *shift,
-					  uint64_t *mask, unsigned *be,
-					  const char *device_dir, const char *name,
-					  const char *generic_name);
+int iioutils_get_type(unsigned *is_signed, unsigned *bytes, unsigned *bits_used,
+		      unsigned *shift, uint64_t *mask, unsigned *be,
+		      const char *device_dir, const char *name,
+		      const char *generic_name);
 int iioutils_get_param_float(float *output, const char *param_name,
-							 const char *device_dir, const char *name,
-							 const char *generic_name);
+			     const char *device_dir, const char *name,
+			     const char *generic_name);
 void bsort_channel_array_by_index(struct iio_channel_info **ci_array, int cnt);
 int build_channel_array(const char *device_dir,
-						struct iio_channel_info **ci_array, int *counter);
+			struct iio_channel_info **ci_array, int *counter);
 int find_type_by_name(const char *name, const char *type);
 int write_sysfs_int(const char *filename, const char *basedir, int val);
 int write_sysfs_int_and_verify(const char *filename, const char *basedir,
tools/iio/lsiio.c +9 -6
index b59ee17..f5b3bd0 100644
@@ -20,7 +20,6 @@
 #include <sys/dir.h>
 #include "iio_utils.h"
 
-
 static enum verbosity {
 	VERBLEVEL_DEFAULT,	/* 0 gives lspci behaviour */
 	VERBLEVEL_SENSORS,	/* 1 lists sensors */
@@ -29,17 +28,16 @@ static enum verbosity {
 const char *type_device = "iio:device";
 const char *type_trigger = "trigger";
 
-
 static inline int check_prefix(const char *str, const char *prefix)
 {
 	return strlen(str) > strlen(prefix) &&
-		strncmp(str, prefix, strlen(prefix)) == 0;
+	       strncmp(str, prefix, strlen(prefix)) == 0;
 }
 
 static inline int check_postfix(const char *str, const char *postfix)
 {
 	return strlen(str) > strlen(postfix) &&
-		strcmp(str + strlen(str) - strlen(postfix), postfix) == 0;
+	       strcmp(str + strlen(str) - strlen(postfix), postfix) == 0;
 }
 
 static int dump_channels(const char *dev_dir_name)
@@ -50,11 +48,11 @@ static int dump_channels(const char *dev_dir_name)
 	dp = opendir(dev_dir_name);
 	if (dp == NULL)
 		return -errno;
+
 	while (ent = readdir(dp), ent != NULL)
 		if (check_prefix(ent->d_name, "in_") &&
-		    check_postfix(ent->d_name, "_raw")) {
+		    check_postfix(ent->d_name, "_raw"))
 			printf("   %-10s\n", ent->d_name);
-		}
 
 	return (closedir(dp) == -1) ? -errno : 0;
 }
@@ -69,6 +67,7 @@ static int dump_one_device(const char *dev_dir_name)
 			"%i", &dev_idx);
 	if (retval != 1)
 		return -EINVAL;
+
 	retval = read_sysfs_string("name", dev_dir_name, name);
 	if (retval)
 		return retval;
@@ -77,6 +76,7 @@ static int dump_one_device(const char *dev_dir_name)
 
 	if (verblevel >= VERBLEVEL_SENSORS)
 		return dump_channels(dev_dir_name);
+
 	return 0;
 }
 
@@ -90,11 +90,13 @@ static int dump_one_trigger(const char *dev_dir_name)
 			"%i", &dev_idx);
 	if (retval != 1)
 		return -EINVAL;
+
 	retval = read_sysfs_string("name", dev_dir_name, name);
 	if (retval)
 		return retval;
 
 	printf("Trigger %03d: %s\n", dev_idx, name);
+
 	return 0;
 }
 
@@ -151,6 +153,7 @@ static int dump_devices(void)
 			free(dev_dir_name);
 		}
 	}
+
 	return (closedir(dp) == -1) ? -errno : 0;
 
 error_close_dir:
#10 lore raw

PATCH v2 3/3 tools:iio: rename variables

In reply to Hartmut Knaack

Use more appropriate/common variable names:
* namepf instead of nameFile in iio_utils.c
* ret instead of retval in lsiio.c

---
 tools/iio/iio_utils.c | 10 +++++-----
 tools/iio/lsiio.c     | 28 ++++++++++++++--------------
 2 files changed, 19 insertions(+), 19 deletions(-)
tools/iio/iio_utils.c +5 -5
index 4eac11a..8fb3214 100644
@@ -561,7 +561,7 @@ int find_type_by_name(const char *name, const char *type)
 	const struct dirent *ent;
 	int number, numstrlen, ret;
 
-	FILE *nameFile;
+	FILE *namefp;
 	DIR *dp;
 	char thisname[IIO_MAX_NAME_LENGTH];
 	char *filename;
@@ -607,20 +607,20 @@ int find_type_by_name(const char *name, const char *type)
 					goto error_close_dir;
 				}
 
-				nameFile = fopen(filename, "r");
-				if (!nameFile) {
+				namefp = fopen(filename, "r");
+				if (!namefp) {
 					free(filename);
 					continue;
 				}
 
 				free(filename);
 				errno = 0;
-				if (fscanf(nameFile, "%s", thisname) != 1) {
+				if (fscanf(namefp, "%s", thisname) != 1) {
 					ret = errno ? -errno : -ENODATA;
 					goto error_close_dir;
 				}
 
-				if (fclose(nameFile)) {
+				if (fclose(namefp)) {
 					ret = -errno;
 					goto error_close_dir;
 				}
tools/iio/lsiio.c +14 -14
index f5b3bd0..7f432a5 100644
@@ -61,16 +61,16 @@ static int dump_one_device(const char *dev_dir_name)
 {
 	char name[IIO_MAX_NAME_LENGTH];
 	int dev_idx;
-	int retval;
+	int ret;
 
-	retval = sscanf(dev_dir_name + strlen(iio_dir) + strlen(type_device),
-			"%i", &dev_idx);
-	if (retval != 1)
+	ret = sscanf(dev_dir_name + strlen(iio_dir) + strlen(type_device), "%i",
+		     &dev_idx);
+	if (ret != 1)
 		return -EINVAL;
 
-	retval = read_sysfs_string("name", dev_dir_name, name);
-	if (retval)
-		return retval;
+	ret = read_sysfs_string("name", dev_dir_name, name);
+	if (ret)
+		return ret;
 
 	printf("Device %03d: %s\n", dev_idx, name);
 
@@ -84,16 +84,16 @@ static int dump_one_trigger(const char *dev_dir_name)
 {
 	char name[IIO_MAX_NAME_LENGTH];
 	int dev_idx;
-	int retval;
+	int ret;
 
-	retval = sscanf(dev_dir_name + strlen(iio_dir) + strlen(type_trigger),
-			"%i", &dev_idx);
-	if (retval != 1)
+	ret = sscanf(dev_dir_name + strlen(iio_dir) + strlen(type_trigger),
+		     "%i", &dev_idx);
+	if (ret != 1)
 		return -EINVAL;
 
-	retval = read_sysfs_string("name", dev_dir_name, name);
-	if (retval)
-		return retval;
+	ret = read_sysfs_string("name", dev_dir_name, name);
+	if (ret)
+		return ret;
 
 	printf("Trigger %03d: %s\n", dev_idx, name);
 
Signature · 1 line
2.3.6