arm: imx6: tqma6: Kconfig rework

PATCH New Markus Niebel 3 participants 10 messages Jun 4, 2015 – Feb 19, 2017 Arm (32-bit)

lore

Share & tools

lore

Markus Niebel

author

2015-06-04 15:25 UTC #0 lore raw

v2 cover arm: imx6: tqma6: Kconfig rework

From: Markus Niebel <[email protected]>

This series extends the Kconfig options for TQMa6 to enable removal of CONFIG_SYS_EXTRA_OPTIONS for this boards.

To enable env device / boot device configuration the first patch includes the Kconfig generated header in the board configuration header.

To enable CPU selection the second patch moves the board selection to the i.MX6 CPU menu as implemented by the Seco mx6 boards

Changed for v2:
- rebase to current u-boot-imx
- add new patch to fix envcrc build for non default boot / env devices
- regenerate defconfigs to exclude defaults

Markus Niebel (5):
arm: imx6: tqma6: add kconfig to board header
arm: mx6: tqma6: CPU type selection via Kconfig
arm: imx6: tqma6: implement IMX_CONFIG with Kconfig
arm: imx6: tqma6: boot device selection via Kconfig
arm: imx6: tqma6: implement KConfig baseboard selection

 arch/arm/Kconfig                  |  5 ----
 arch/arm/cpu/armv7/mx6/Kconfig    |  5 ++++
 board/tqc/tqma6/Kconfig           | 58 +++++++++++++++++++++++++++++++++++++++
 configs/tqma6q_mba6_mmc_defconfig |  2 +-
 configs/tqma6q_mba6_spi_defconfig |  3 +-
 configs/tqma6s_mba6_mmc_defconfig |  3 +-
 configs/tqma6s_mba6_spi_defconfig |  4 ++-
 include/configs/tqma6.h           |  1 +
 8 files changed, 72 insertions(+), 9 deletions(-)

Signature · 1 line

2.3.0

Markus Niebel

author

2015-06-04 15:25 UTC #1 lore raw

PATCH v2 1/5 arm: imx6: tqma6: add kconfig to board header

From: Markus Niebel <[email protected]>

this is needed later to have Kconfig generated
stuff as define.

Signed-off-by Markus Niebel <[email protected]>

---
 include/configs/tqma6.h | 1 +
 1 file changed, 1 insertion(+)

include/configs/tqma6.h +1 -0

index 4c93c9b..f9de0c6 100644
@@ -9,6 +9,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/kconfig.h>
 /* SPL */
 /* #if defined(CONFIG_SPL_BUILD) */

Signature · 1 line

2.3.0

Markus Niebel

author

2015-06-04 15:25 UTC #2 lore raw

PATCH v2 2/5 arm: mx6: tqma6: CPU type selection via Kconfig

In reply to Markus Niebel

From: Markus Niebel <[email protected]>

This is the first patch to remove the
CONFIG_SYS_EXTRA_OPTIONS.

This patch implements CPU type selection from Kconfig. Further Kconfig stuff is added later.

Signed-off-by Markus Niebel <[email protected]>

---
Changes in v2:
- regenerate defconfigs

 arch/arm/Kconfig                  |  5 -----
 arch/arm/cpu/armv7/mx6/Kconfig    |  5 +++++
 board/tqc/tqma6/Kconfig           | 21 +++++++++++++++++++++
 configs/tqma6q_mba6_mmc_defconfig |  3 ++-
 configs/tqma6q_mba6_spi_defconfig |  3 ++-
 configs/tqma6s_mba6_mmc_defconfig |  4 +++-
 configs/tqma6s_mba6_spi_defconfig |  4 +++-
 7 files changed, 36 insertions(+), 9 deletions(-)

arch/arm/Kconfig +0 -5

index b62842f..2ea6643 100644
@@ -576,10 +576,6 @@ config TARGET_TBS2910
 	bool "Support tbs2910"
 	select CPU_V7
 
-config TARGET_TQMA6
-	bool "TQ Systems TQMa6 board"
-	select CPU_V7
-
 config TARGET_OT1200
 	bool "Bachmann OT1200"
 	select CPU_V7

@@ -954,7 +950,6 @@ source "board/ti/ti816x/Kconfig"
 source "board/timll/devkit3250/Kconfig"
 source "board/toradex/colibri_pxa270/Kconfig"
 source "board/toradex/colibri_vf/Kconfig"
-source "board/tqc/tqma6/Kconfig"
 source "board/trizepsiv/Kconfig"
 source "board/ttcontrol/vision2/Kconfig"
 source "board/udoo/Kconfig"

arch/arm/cpu/armv7/mx6/Kconfig +5 -0

index 1282be3..10908c4 100644
@@ -33,11 +33,16 @@ config TARGET_SECOMX6
 	bool "Support secomx6 boards"
 	select CPU_V7
 
+config TARGET_TQMA6
+	bool "TQ Systems TQMa6 board"
+	select CPU_V7
+
 endchoice
 
 config SYS_SOC
 	default "mx6"
 
 source "board/seco/Kconfig"
+source "board/tqc/tqma6/Kconfig"
 
 endif

board/tqc/tqma6/Kconfig +21 -0

index f8b3d1f..3e4d9f5 100644
@@ -12,4 +12,25 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "tqma6"
 
+choice
+	prompt "TQMa6 SoC variant"
+	default TQMA6Q
+	help
+	  select the TQMa6 module variant. The variants differing in the used
+	  i.MX6 CPU type and DRAM
+
+config TQMA6Q
+	bool "TQMa6Q / TQMa6D"
+	select MX6Q
+	help
+	  select TQMa6Q / TQMa6D with i.MX6Q/D and 1GiB DRAM
+
+config TQMA6S
+	bool "TQMa6S"
+	select MX6S
+	help
+	  select TQMa6S with i.MX6S and 512 MiB DRAM
+
+endchoice
+
 endif

configs/tqma6q_mba6_mmc_defconfig +2 -1

index 627883a..e6dcc99 100644
@@ -1,3 +1,4 @@
 CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6q.cfg,MX6Q,MBA6,TQMA6X_MMC_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6q.cfg,MBA6,TQMA6X_MMC_BOOT"

configs/tqma6q_mba6_spi_defconfig +2 -1

index a56a802..ab811a9 100644
@@ -1,3 +1,4 @@
 CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6q.cfg,MX6Q,MBA6,TQMA6X_SPI_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6q.cfg,MBA6,TQMA6X_SPI_BOOT"

configs/tqma6s_mba6_mmc_defconfig +3 -1

index 51958e2..b7feb18 100644
@@ -1,3 +1,5 @@
 CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6s.cfg,MX6S,MBA6,TQMA6X_MMC_BOOT"
+CONFIG_TQMA6S=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6s.cfg,MBA6,TQMA6X_MMC_BOOT"

configs/tqma6s_mba6_spi_defconfig +3 -1

index f94f704..24d07cd 100644
@@ -1,3 +1,5 @@
 CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6s.cfg,MX6S,MBA6,TQMA6X_SPI_BOOT"
+CONFIG_TQMA6S=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6s.cfg,MBA6,TQMA6X_SPI_BOOT"

Signature · 1 line

2.3.0

Markus Niebel

author

2015-06-04 15:25 UTC #3 lore raw

PATCH v2 3/5 arm: imx6: tqma6: implement IMX_CONFIG with Kconfig

In reply to Markus Niebel

From: Markus Niebel <[email protected]>

Now that we have the Kconfig based CPU type selection, use this to fill the IMX_CONFIG automatically

Signed-off-by Markus Niebel <[email protected]>

---
Changes for v2:
- regenerate defconfigs

 board/tqc/tqma6/Kconfig           | 4 ++++
 configs/tqma6q_mba6_mmc_defconfig | 2 +-
 configs/tqma6q_mba6_spi_defconfig | 2 +-
 configs/tqma6s_mba6_mmc_defconfig | 2 +-
 configs/tqma6s_mba6_spi_defconfig | 2 +-
 5 files changed, 8 insertions(+), 4 deletions(-)

board/tqc/tqma6/Kconfig +4 -0

index 3e4d9f5..ce47ba4 100644
@@ -33,4 +33,8 @@ config TQMA6S
 
 endchoice
 
+config IMX_CONFIG
+	default "board/tqc/tqma6/tqma6q.cfg" if TQMA6Q
+	default "board/tqc/tqma6/tqma6s.cfg" if TQMA6S
+
 endif

configs/tqma6q_mba6_mmc_defconfig +1 -1

index e6dcc99..ffdceb3 100644
@@ -1,4 +1,4 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6q.cfg,MBA6,TQMA6X_MMC_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="MBA6,TQMA6X_MMC_BOOT"

configs/tqma6q_mba6_spi_defconfig +1 -1

index ab811a9..dc88151 100644
@@ -1,4 +1,4 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6q.cfg,MBA6,TQMA6X_SPI_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="MBA6,TQMA6X_SPI_BOOT"

configs/tqma6s_mba6_mmc_defconfig +1 -1

index b7feb18..6c0763d 100644
@@ -2,4 +2,4 @@ CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
 CONFIG_TQMA6S=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6s.cfg,MBA6,TQMA6X_MMC_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="MBA6,TQMA6X_MMC_BOOT"

configs/tqma6s_mba6_spi_defconfig +1 -1

index 24d07cd..4873ffb 100644
@@ -2,4 +2,4 @@ CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
 CONFIG_TQMA6S=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6s.cfg,MBA6,TQMA6X_SPI_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="MBA6,TQMA6X_SPI_BOOT"

Signature · 1 line

2.3.0

Markus Niebel

author

2015-06-04 15:25 UTC #4 lore raw

PATCH v2 4/5 arm: imx6: tqma6: boot device selection via Kconfig

In reply to Markus Niebel

From: Markus Niebel <[email protected]>

Signed-off-by Markus Niebel <[email protected]>

---
Changes for v2:
- regenerate defconfigs

 board/tqc/tqma6/Kconfig           | 19 +++++++++++++++++++
 configs/tqma6q_mba6_mmc_defconfig |  2 +-
 configs/tqma6q_mba6_spi_defconfig |  3 ++-
 configs/tqma6s_mba6_mmc_defconfig |  2 +-
 configs/tqma6s_mba6_spi_defconfig |  3 ++-
 5 files changed, 25 insertions(+), 4 deletions(-)

board/tqc/tqma6/Kconfig +19 -0

index ce47ba4..132e82f 100644
@@ -33,6 +33,25 @@ config TQMA6S
 
 endchoice
 
+choice
+	prompt "TQMa6 boot configuration"
+	default TQMA6X_MMC_BOOT
+	help
+	  Configure boot device. This is also used to implement environment
+	  location.
+
+config TQMA6X_MMC_BOOT
+	bool "MMC / SD Boot"
+	help
+	  Boot from eMMC / SD Card
+
+config TQMA6X_SPI_BOOT
+	bool "SPI NOR Boot"
+	help
+	  Boot from on board SPI NOR flash
+
+endchoice
+
 config IMX_CONFIG
 	default "board/tqc/tqma6/tqma6q.cfg" if TQMA6Q
 	default "board/tqc/tqma6/tqma6s.cfg" if TQMA6S

configs/tqma6q_mba6_mmc_defconfig +1 -1

index ffdceb3..82a19b9 100644
@@ -1,4 +1,4 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
-CONFIG_SYS_EXTRA_OPTIONS="MBA6,TQMA6X_MMC_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="MBA6"

configs/tqma6q_mba6_spi_defconfig +2 -1

index dc88151..102291d 100644
@@ -1,4 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
-CONFIG_SYS_EXTRA_OPTIONS="MBA6,TQMA6X_SPI_BOOT"
+CONFIG_TQMA6X_SPI_BOOT=y
+CONFIG_SYS_EXTRA_OPTIONS="MBA6"

configs/tqma6s_mba6_mmc_defconfig +1 -1

index 6c0763d..09a820e 100644
@@ -2,4 +2,4 @@ CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
 CONFIG_TQMA6S=y
-CONFIG_SYS_EXTRA_OPTIONS="MBA6,TQMA6X_MMC_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="MBA6"

configs/tqma6s_mba6_spi_defconfig +2 -1

index 4873ffb..d874dc2 100644
@@ -2,4 +2,5 @@ CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
 CONFIG_TQMA6S=y
-CONFIG_SYS_EXTRA_OPTIONS="MBA6,TQMA6X_SPI_BOOT"
+CONFIG_TQMA6X_SPI_BOOT=y
+CONFIG_SYS_EXTRA_OPTIONS="MBA6"

Signature · 1 line

2.3.0

Markus Niebel

author

2015-06-04 15:25 UTC #5 lore raw

PATCH v2 5/5 arm: imx6: tqma6: implement KConfig baseboard selection

In reply to Markus Niebel

From: Markus Niebel <[email protected]>

this finally removes the need for extra settings in defconfig

Signed-off-by Markus Niebel <[email protected]>

---
Changes for v2:
- add default for new choice
- regenerate defconfigs

 board/tqc/tqma6/Kconfig           | 14 ++++++++++++++
 configs/tqma6q_mba6_mmc_defconfig |  1 -
 configs/tqma6q_mba6_spi_defconfig |  1 -
 configs/tqma6s_mba6_mmc_defconfig |  1 -
 configs/tqma6s_mba6_spi_defconfig |  1 -
 5 files changed, 14 insertions(+), 4 deletions(-)

board/tqc/tqma6/Kconfig +14 -0

index 132e82f..b56237d 100644
@@ -52,6 +52,20 @@ config TQMA6X_SPI_BOOT
 
 endchoice
 
+choice
+	prompt "TQMa6 base board variant"
+	default MBA6
+	help
+	  Select base board for TQMa6
+
+config MBA6
+	bool "TQMa6 on MBa6 Starterkit"
+	help
+	  Select the MBa6 starterkit. This features a GigE Phy, USB, SD-Card
+	  etc.
+
+endchoice
+
 config IMX_CONFIG
 	default "board/tqc/tqma6/tqma6q.cfg" if TQMA6Q
 	default "board/tqc/tqma6/tqma6s.cfg" if TQMA6S

configs/tqma6q_mba6_mmc_defconfig +0 -1

index 82a19b9..7e67132 100644
@@ -1,4 +1,3 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
-CONFIG_SYS_EXTRA_OPTIONS="MBA6"

configs/tqma6q_mba6_spi_defconfig +0 -1

index 102291d..1f91f6d 100644
@@ -2,4 +2,3 @@ CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
 CONFIG_TQMA6X_SPI_BOOT=y
-CONFIG_SYS_EXTRA_OPTIONS="MBA6"

configs/tqma6s_mba6_mmc_defconfig +0 -1

index 09a820e..2eb891b 100644
@@ -2,4 +2,3 @@ CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
 CONFIG_TQMA6S=y
-CONFIG_SYS_EXTRA_OPTIONS="MBA6"

configs/tqma6s_mba6_spi_defconfig +0 -1

index d874dc2..92b9711 100644
@@ -3,4 +3,3 @@ CONFIG_ARCH_MX6=y
 CONFIG_TARGET_TQMA6=y
 CONFIG_TQMA6S=y
 CONFIG_TQMA6X_SPI_BOOT=y
-CONFIG_SYS_EXTRA_OPTIONS="MBA6"

Signature · 1 line

2.3.0

Markus Niebel

2015-06-15 13:34 UTC #6 lore raw

v2 cover arm: imx6: tqma6: Kconfig rework

In reply to Markus Niebel

Hello,

Am 04.06.2015 um 17:25 schrieb Markus Niebel:

Quoted 9 lines

From: Markus Niebel <[email protected]>
This series extends the Kconfig options for TQMa6 to enable removal of CONFIG_SYS_EXTRA_OPTIONS for this boards.
To enable env device / boot device configuration the first patch includes the Kconfig generated header in the board configuration header.

Quoted 9 lines

To enable CPU selection the second patch moves the board selection to the i.MX6 CPU menu as implemented by the Seco mx6 boards
Changed for v2:
- rebase to current u-boot-imx
- add new patch to fix envcrc build for non default boot / env devices
- regenerate defconfigs to exclude defaults

Did just notice, that I forgot Stefano in CC.
Shall I resend or spin v3 - maybe I should change the Kconfig choices to be "optional" instead of having a "default". Also would it be better t squash the last 4 patches?

Quoted 17 lines

Markus Niebel (5):
arm: imx6: tqma6: add kconfig to board header
arm: mx6: tqma6: CPU type selection via Kconfig
arm: imx6: tqma6: implement IMX_CONFIG with Kconfig
arm: imx6: tqma6: boot device selection via Kconfig
arm: imx6: tqma6: implement KConfig baseboard selection
 arch/arm/Kconfig                  |  5 ----
 arch/arm/cpu/armv7/mx6/Kconfig    |  5 ++++
 board/tqc/tqma6/Kconfig           | 58 +++++++++++++++++++++++++++++++++++++++
 configs/tqma6q_mba6_mmc_defconfig |  2 +-
 configs/tqma6q_mba6_spi_defconfig |  3 +-
 configs/tqma6s_mba6_mmc_defconfig |  3 +-
 configs/tqma6s_mba6_spi_defconfig |  4 ++-
 include/configs/tqma6.h           |  1 +
 8 files changed, 72 insertions(+), 9 deletions(-)

Stefano Babic

2015-06-27 16:04 UTC #7 lore raw

v2 cover arm: imx6: tqma6: Kconfig rework

Hi Markus,

Quoted 5 lines · Markus Niebel

Did just notice, that I forgot Stefano in CC.
Shall I resend or spin v3 - maybe I should change the Kconfig choices to be "optional" instead of having a "default". Also would it be better t squash the last 4 patches?

It is ok so - you could change th "optional" in a follow up patch.

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

Signature · 5 lines

=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

Stefano Babic

2017-02-19 16:18 UTC #8 lore raw

v2 cover arm: imx6: tqma6: Kconfig rework

In reply to Markus Niebel

Quoted 25 lines · Markus Niebel

From: Markus Niebel <[email protected]>
This series extends the Kconfig options for TQMa6 to enable removal of CONFIG_SYS_EXTRA_OPTIONS for this boards.
To enable env device / boot device configuration the first patch includes the Kconfig generated header in the board configuration header.
To enable CPU selection the second patch moves the board selection to the i.MX6 CPU menu as implemented by the Seco mx6 boards
Changed for v2:
- rebase to current u-boot-imx
- add new patch to fix envcrc build for non default boot / env devices
- regenerate defconfigs to exclude defaults
Markus Niebel (5):
arm: imx6: tqma6: add kconfig to board header
arm: mx6: tqma6: CPU type selection via Kconfig
arm: imx6: tqma6: implement IMX_CONFIG with Kconfig
arm: imx6: tqma6: boot device selection via Kconfig
arm: imx6: tqma6: implement KConfig baseboard selection

Quoted 10 lines

 arch/arm/Kconfig                  |  5 ----
 arch/arm/cpu/armv7/mx6/Kconfig    |  5 ++++
 board/tqc/tqma6/Kconfig           | 58 +++++++++++++++++++++++++++++++++++++++
 configs/tqma6q_mba6_mmc_defconfig |  2 +-
 configs/tqma6q_mba6_spi_defconfig |  3 +-
 configs/tqma6s_mba6_mmc_defconfig |  3 +-
 configs/tqma6s_mba6_spi_defconfig |  4 ++-
 include/configs/tqma6.h           |  1 +
 8 files changed, 72 insertions(+), 9 deletions(-)

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

Signature · 8 lines

Meet DENX at the Embedded World Trade Show
14 Mar - 16 Mar 2017, Nuremberg Trade Fair Centre, Hall 4, Booth 581
--
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

Stefano Babic

2017-02-19 16:23 UTC #9 lore raw

v2 cover arm: imx6: tqma6: Kconfig rework

Quoted 38 lines · Stefano Babic

Quoted 25 lines · Markus Niebel
From: Markus Niebel <[email protected]>
This series extends the Kconfig options for TQMa6 to enable removal of CONFIG_SYS_EXTRA_OPTIONS for this boards.
To enable env device / boot device configuration the first patch includes the Kconfig generated header in the board configuration header.
To enable CPU selection the second patch moves the board selection to the i.MX6 CPU menu as implemented by the Seco mx6 boards
Changed for v2:
- rebase to current u-boot-imx
- add new patch to fix envcrc build for non default boot / env devices
- regenerate defconfigs to exclude defaults
Markus Niebel (5):
arm: imx6: tqma6: add kconfig to board header
arm: mx6: tqma6: CPU type selection via Kconfig
arm: imx6: tqma6: implement IMX_CONFIG with Kconfig
arm: imx6: tqma6: boot device selection via Kconfig
arm: imx6: tqma6: implement KConfig baseboard selection
Quoted 10 lines
 arch/arm/Kconfig                  |  5 ----
 arch/arm/cpu/armv7/mx6/Kconfig    |  5 ++++
 board/tqc/tqma6/Kconfig           | 58 +++++++++++++++++++++++++++++++++++++++
 configs/tqma6q_mba6_mmc_defconfig |  2 +-
 configs/tqma6q_mba6_spi_defconfig |  3 +-
 configs/tqma6s_mba6_mmc_defconfig |  3 +-
 configs/tqma6s_mba6_spi_defconfig |  4 ++-
 include/configs/tqma6.h           |  1 +
 8 files changed, 72 insertions(+), 9 deletions(-)

Quoted 5 lines

Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic

Sorry, I took the wrong e-mail - but you know what I did.

I applied patches 1-6 (Fix in the environment an cleanup for tqma6)

Best regards,
Stefano

Signature · 8 lines

Meet DENX at the Embedded World Trade Show
14 Mar - 16 Mar 2017, Nuremberg Trade Fair Centre, Hall 4, Booth 581
--
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================