configs/acmesystems_aria_g25: new config
PATCH 1/1 configs/acmesystems_aria_g25: new config
Add a new basic configuration for ACME Systems ARIA G25 SOM.
--- .../aria-g25/at91bootstrap_aria_g25.config | 9 ++++ board/acmesystems/aria-g25/readme.txt | 48 ++++++++++++++++++++++ configs/acmesystems_aria_g25_defconfig | 24 +++++++++++ 3 files changed, 81 insertions(+) create mode 100644 board/acmesystems/aria-g25/at91bootstrap_aria_g25.config create mode 100644 board/acmesystems/aria-g25/readme.txt create mode 100644 configs/acmesystems_aria_g25_defconfig
board/acmesystems/aria-g25/at91bootstrap_aria_g25.config new file +9 -0
@@ -0,0 +1,9 @@ +CONFIG_AT91SAM9X5_ARIA=y +CONFIG_BUS_SPEED_100MHZ=y +CONFIG_RAM_128MB=y +CONFIG_SDCARD=y +CONFIG_LOAD_LINUX=y +CONFIG_LINUX_ZIMAGE=y +CONFIG_LINUX_KERNEL_ARG_STRING="mem=256M console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" +CONFIG_DEBUG=y +CONFIG_THUMB=y
board/acmesystems/aria-g25/readme.txt new file +48 -0
48 lines not on this page · raw message
configs/acmesystems_aria_g25_defconfig new file +24 -0
@@ -0,0 +1,24 @@ +# Architecture +BR2_arm=y + +# Toolchain +BR2_KERNEL_HEADERS_VERSION=y +BR2_DEFAULT_KERNEL_VERSION="4.1" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1" +BR2_LINUX_KERNEL_DEFCONFIG="at91_dt" +BR2_LINUX_KERNEL_ZIMAGE=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25" + +# Bootloader +BR2_TARGET_AT91BOOTSTRAP3=y +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="git://github.com/tanzilli/at91bootstrap.git" +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="3f957cec253abc80fd10c733e5e596f46e1aef56" +BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG=y +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE="board/acmesystems/aria-g25/at91bootstrap_aria_g25.config"
Signature · 1 line
2.3.6
PATCH 1/1 configs/acmesystems_aria_g25: new config
Dear Gustavo Zacarias,
board/acmesystems/aria-g25/at91bootstrap_aria_g25.config line 3
Quoted 9 lines · Gustavo Zacarias
board/acmesystems/aria-g25/at91bootstrap_aria_g25.config new file +3
-0@@ -0,0 +1,9 @@ +CONFIG_AT91SAM9X5_ARIA=y +CONFIG_BUS_SPEED_100MHZ=y +CONFIG_RAM_128MB=y
So, 128 MB ?
board/acmesystems/aria-g25/at91bootstrap_aria_g25.config line 7
Quoted 4 lines
board/acmesystems/aria-g25/at91bootstrap_aria_g25.config new file +4
-0+CONFIG_SDCARD=y +CONFIG_LOAD_LINUX=y +CONFIG_LINUX_ZIMAGE=y +CONFIG_LINUX_KERNEL_ARG_STRING="mem=256M console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
Or 256 MB ?
Also, could you review the patch from Angelo adding support for another board from ACME:
http://patchwork.ozlabs.org/patch/485319/
Thanks,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 configs/acmesystems_aria_g25: new config
Quoted 16 lines · Thomas Petazzoni
Dear Gustavo Zacarias,
board/acmesystems/aria-g25/at91bootstrap_aria_g25.config line 3
Quoted 9 lines · Gustavo Zacarias
board/acmesystems/aria-g25/at91bootstrap_aria_g25.config new file +3
-0@@ -0,0 +1,9 @@ +CONFIG_AT91SAM9X5_ARIA=y +CONFIG_BUS_SPEED_100MHZ=y +CONFIG_RAM_128MB=ySo, 128 MB ?
Quoted 6 lines
board/acmesystems/aria-g25/at91bootstrap_aria_g25.config line 7
Quoted 4 lines
board/acmesystems/aria-g25/at91bootstrap_aria_g25.config new file +4
-0+CONFIG_SDCARD=y +CONFIG_LOAD_LINUX=y +CONFIG_LINUX_ZIMAGE=y +CONFIG_LINUX_KERNEL_ARG_STRING="mem=256M console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"Or 256 MB ?
Ouch, i'll send V2 with two configs (got 256MB hardware here, with the 128MB config the memory is reduced as expected).
Quoted 4 lines
Also, could you review the patch from Angelo adding support for another board from ACME:
http://patchwork.ozlabs.org/patch/485319/
The Arietta is a stripped down Aria, i'll take a look but i have no way of testing it since i don't have one.
Having get that out of the way, it'll probably work just fine on the Aria i think.
Regards.
PATCH 1/1 configs/acmesystems_aria_g25: new config
Dear Gustavo Zacarias,
Quoted 2 lines · Gustavo Zacarias
Ouch, i'll send V2 with two configs (got 256MB hardware here, with the 128MB config the memory is reduced as expected).
One thing that was bothering me in the contribution from Angelo was specifically the need for two defconfigs. I guess there's no way to runtime detect the memory size, and therefore build a single at91bootstrap3 for both board configurations?
Quoted 7 lines
Quoted 4 lines
Also, could you review the patch from Angelo adding support for another board from ACME:
http://patchwork.ozlabs.org/patch/485319/The Arietta is a stripped down Aria, i'll take a look but i have no way of testing it since i don't have one.
I really only asked for patch review, not testing. So not having the HW is not a good excuse :-)
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 configs/acmesystems_aria_g25: new config
Quoted 4 lines · Thomas Petazzoni
One thing that was bothering me in the contribution from Angelo was specifically the need for two defconfigs. I guess there's no way to runtime detect the memory size, and therefore build a single at91bootstrap3 for both board configurations?
It doesn't seem to be the case at this point.
I think it could be doable via 2nd stage (u-boot) but for an SD-boot i don't see much benefit in having it around (that would change if eMMC was involved, but it generally isn't the case, specially for the Arietta).
Quoted 2 lines
I really only asked for patch review, not testing. So not having the HW is not a good excuse :-)
Yes, yes, i know, i was just stating that it'll be a quick look with Aria-knowledge :)
Regards.